LabWindows/CVI 2013 SP2 stops working when I try to open a file using the project file menu.

I have windows 7 on my system and sometime late last year I starrted getting a Windows dialog telling me that LabWindows/CVI has stopped working when I try to open a file from the project file menu.  I also get an error when I run a project debug mode and use a selectFilePopup in the code.  The error says, "The program has suspended execution at address 0x75D5025E.  No source line information is available."  I've tried removing and reinstalling CVI to no avail.  Any suggestions?

Constantin,
Thank you for your response.  I've attached screnshots showing the version details for kernal32.dll and ntdll.dll.  I also looked at the updates to see which might have been installed when the problem started.  Unfortunately there are 15-20 updates every month.  I didn't take note of when the error started to occur.  At first it only affected my ability to open files from within the project (i.e. file->open->Source, etc).  Then I went back to modify a project that had a SelectFilePopup and found that that wouldn't work either. 
Attachments:
ntdll.dll version.jpg ‏15 KB

Similar Messages

  • Photoshop stop working when i try to open it

    Photoshop stop working when i try to open it, this only happens in my gf notebook, on my notebook Photoshop works normally...
    It Don't initiate, when are on startup it just crash... Its like the image below, but Photoshop CC

    You will likely get better program help in a program forum Photoshop General Discussion
    These questions below may be for a different product... but the KIND of information you need to supply is the same, when you ask in that forum
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Why do I keep getting the message "Photoshop Elements 13 Editor has stopped working" when I try to open Photoshop?

    Every time I try to launch Photoshop it stops working. Adobe customer support was not able to help me resolve the issue. Does anyone have a fix? Thank you

    Next time try starting it while holding down Ctrl+alt+shift (cmd+option+shift on a mac). Keep the keys down till you hopefully see a window asking if you want to delete the settings file. You do.

  • Keynote stops working when I try to open a document

    Dear all,
    I finished a very important presentation today and saved it as keynote doc, and export it as ppt document so I could use it with the PC.
    Now I am trying to open same document in Keynote and the whole mac becomes EXTREMELY SLOW and freezes. I have Mac Office 08 also and I have just tired to open ppt version of same document in Microsoft Powerpoint. Same result: mac becomes extremely slow and opening of 15MB document seems like eternity.
    What's wrong?? What to do?

    Constantin,
    Thank you for your response.  I've attached screnshots showing the version details for kernal32.dll and ntdll.dll.  I also looked at the updates to see which might have been installed when the problem started.  Unfortunately there are 15-20 updates every month.  I didn't take note of when the error started to occur.  At first it only affected my ability to open files from within the project (i.e. file->open->Source, etc).  Then I went back to modify a project that had a SelectFilePopup and found that that wouldn't work either. 
    Attachments:
    ntdll.dll version.jpg ‏15 KB

  • Excel has stopped working when I try to launch Excel 2013 Powerpivot

    Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
    My system is a Windows 7 machine, 64 bit
    I previously had Excel 2010 32bit with 32 both Powerpivot installed.  However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
    However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
    I took a look in the Windows events logs and found:
    Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
    Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
    Exception code: 0xc0000005
    Fault offset: 0x00000000002ba203
    Faulting process id: 0x3e8c
    Faulting application start time: 0x01cf52a7644eda9d
    Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
    Report Id: afa4f824-be9a-11e3-94ac-415645000030
    I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

    You can go to check the dll file, what's size of this dll file?
    If the file size is 0 byte, you can check the link below:
    http://forums.steampowered.com/forums/showthread.php?t=2735528
    Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
    In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
    the accuracy of this information.
    Wind Zhang
    TechNet Community Support

  • LabWindows/CVI 2013 SP2

    I just received the email announcing LabWindows/CVI 2013 SP2 is available for download.
    I can't seem to find the release notes that explain the changes anywhere on the NI website.
    Anybody know where the release notes are posted?
    Thanks,
    Kirk

    Hello Kirk,
    Please refer to the LabWindows/CVI 2013 SP2 Bug Fix Information document for a list of bug fixes included in the release.
    Thanks,
    Daniel D.
    National Instruments
    Automated Test Software R&D

  • Itunes stops working when I try to upload CD

    Itunes stops working when I go to type in info on audio cd file prior to download

    Ah... interesting. I do have errors in the event log for the Bonjour service for all of the times that I have tried to connect (8 for every time I try to connect). They are on the Vista machine and it says : XXX: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    The XXX is different number for each of the 8 and includes: 488, 480,476, 472, 468, 464, 460, and 452.
    It also has an application error for itunes:
    Faulting application iTunes.exe, version 9.2.1.5, time stamp 0x4c47745b, faulting module iTunes.dll, version 9.2.1.5, time stamp 0x4c477437, exception code 0xc0000005, fault offset 0x0040efa0, process id 0x12b0, application start time 0x01cb2f69002ea6c0.
    So I tried to restart and start Bonjour and that didn't help. I have rebooted and that didn't help either.

  • I get a message that itunes has stopped working when I try to sync photos

    I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
    Can anyone help? Thanks.

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I have also retarted twice...

  • Why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

    why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

    You might get more help asking in Audition CS5.5, CS6 & CC
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Why does my Photoshop 10 application stop working when I try to sign in?

    Why does my photoshop10 application stop working when I try to sign in?

    See this post for the reason and solution:
    http://forums.adobe.com/message/5721815#5721815

  • My camera is stop working when I try to use it!

    My camera is stop working when I try to use it!it close down when I open it..and it's been 2 days now that my telephone is very slow in everything..

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Why does my iTunes stop working when i try to sync music to my iPhone?

    Why does my iTunes stop working when I try to sync music to my iPhone?

    Morning Bandg72,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying this page

    Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.

    Hi thenicegirl07,
    It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
    iPod displays a sad iPod icon
    http://support.apple.com/kb/ts1373
    Resolution
    In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
    If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
    Go to http://www.apple.com/retail/storelist/.
    Choose an Apple Store location.
    Click the Reserve link under Genius Bar.
    Choose iPod.
    Select your desired reservation date and time.
    For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
    Additional Information
    iPod displays a folder icon with an exclamation point
    -Jason

Maybe you are looking for

  • HP Officejet pro 8500a not printing black

    HP Officejet pro 8500a not printing black, we put new cartridges in two times, we replaced the printer head. If I change the document to a blue color, it will print that. 

  • HT1918 why i am not able to see the none option in the payment link?

    why i am not able to see the none option in the payment link?

  • Dvd drive / saving old emails

    A couple of questions. I have an older G4 tower rebuilt with a 1 ghz microprocessor running OS 10.3.9. On startup the tray for the dvd drive opens, this started about a year ago and while it doesn't seem to harm anything it is annoying. I also want t

  • Legacy Data Extraction; iWay Adapters;

    Back in September at Tech Ed Vegas, I attended an XI presentation during which it was stated that it is not a good idea to use XI for first-time data load into SAP. Does everyone agree with this statement?  Is it better to use the LSMW? What about us

  • Discoverer doesn't run the same query than TOAD

    Hi, I'm trying to make the following in Discoverer version 10.1.2: To display some records of a table using a condition and display the total of all of them of the same table. I'm trying to create a custom folder with the following query: SELECT PRST