LACK OF FULL PEN TOOL FUNCTIONALITY WHEN CREATING A SHAPE LAYER

Hello, I'm going through Chris Meyer's video course on being an AE apprentice and have spent over an hour on the following issue.
Here is what I know.
I know I am trying to create a shape layer, not a mask, to create a frame to surround the video of the green field on the attached screenshot.  Therefore, I pressed "F2" to make sure I am doing so.
I want to define the borders of this picture frame by using the pen tool to draw a path on the layer entitled "Windy Peak".
I have highlighted that layer in my timeline.
This video was pasted on to a placeholder shape that I had created using Command Option "/" on my Mac.
I do have limited use of the pen tool, because it displays properly when I hover it above the borders of the video to be framed.
But I lack access to the toolbar controls I want to complete my assignment.
For example, I would like to create a gradient to define the internal coloration of this frame, but I have no use of the eyedropper when I click on the Color Picker.
Also, I am unable to access or manipulate any of the standard fill or stroke options for use of my pen.
This is what I know.  
Thanks for your help!   Matt
Message was edited by: Matt Dubuque to add the fact that the video had been pasted on to a placeholder shape image by pressing Command Option "/" on my Mac.

Thanks for pitching in Todd and Rick, I appreciate it very much.
As previously stated, I do have use of the pen tool, but it only has limited functionality as demonstrated by the path I created on the green meadow.  My Tools Panel remains activated .
My core problem remains that I am unable to adjust the fill or stroke settings for my pen.
I have tried changing and resetting various work spaces and this has not helped.
I'm scratching my head here.
Matt

Similar Messages

  • Holding Shift when creating Vector Shape - No snap to pixels!

    Hi there,
    Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    I'm experiencing the following problem:
    When creating vector shapes and holding shift the shape do not snap to pixel. Snap to pixels is turned on.
    It is pretty strange.
    Please check the video below:
    http://screencast.com/t/1iys3tDJHpJt
    Initially when do not hold shift shapes is pixel perfect. As you can see in the image first 2 shapes are made free hand.
    SK

    Instead of holding the shift key try pressing the + key to change the path operations to Add to Shape Area and the - key to subtract from shape area.
    That is strange behaviour compared to cs5 where having snap to pixels checked for the rectangle tool does align the edges when holding down shift
    where as cs6 13.01 doesn't align the edges when holding shift either with the snap vector preferences of align edges checked.
    It only seems to align the pixels when snap vectors in the preferences is checked and using add to shape area is actually selected in the drop down.
    That's what the plus key does.
    I guess i was under the impression that align edges was supposed to be the same as the snap to pixels was in cs5.
    Message was edited by: R_Kelly

  • Pen tool function

    hey all!
    ive got a question about the pen tool!
    ive notice that in illustrator when i use the pen tool if u make a click from one point to another and then add a point in the middle of the path,it doest make a nice curve like in photoshop rather than it makes a v shape,where as in ps if u do the same procedure u get a nice semi circle shape.is this because of the difference between vector and bitmap,or adobe wanted a slightly different function to thier programs?
    best  regards.

    go wade mate!!!!!
    that was interesting how simple and easy done with that reshape tool,very handy indeed!!!
    thanx!

  • Updating partner function when creating customer XD01/XD02

    Hello all, I have the following requirement to do:
    When creating a customer for a certain account group in XD01/XD02, I need to update the partner functions associated to this customer.
    I have tried, the ENHACEMENT  SAPMF02D with function EXIT_SAPMF02D_001, but when changing table content T_KNVP, this content is not taken into account and the values are not stored in DB.
    I have tried too BADI's CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS, but the content of T_KNVP in CUSTOMER_ADD_DATA cannot be changed.
    I would like to avoid BTE's for now.
    Can someone give me a hand on this?
    Thanks in advance!

    Solution: BAPI CUSTOMER_UPDATE

  • Ai Beginner, Can I make the pen tool function like it does in Photoshop?

    I have been using photoshop to do various things over the last few years, and I am trying to move over to Illustrator. The biggest problem I have already is the function of the pen tool in Ai as opposed to Ps. I have to select an entirely different tool to move points? I can't just hold control and move the point? Is there a way that I can make the hot keys and what not function like the pen tool does in Ps. Why the change in the first place?
    (Also, I am using CS4)

    A feature request maybe? But then there's no-one from Adobe listening out there anyway, so what's the point?
    That's not at all true I have made many feature reques and had quite a few realized. Although one of the bestones was killed.
    But if you make a feature request the right way and you give a good argument for it they will look at it and see if they think it is practical for them to implement.
    The key is practical and a really good reason for the feature.
    And I do know from experience.

  • Using pen tool to draw a particular shape...

    Hi all,
    I'm pretty new to Illustrator and just wanted some advice.
    I'm using the pen tool to try and draw a specific shape () but finding it hard trying to 'smooth' out the points where I connect my lines.
    The pen tool can't draw this all in one go, so when I try to do it in several stages, the lines don't connect up smoothly so it looks a bit... rubbish.
    Anyone got any tips or how to do this simply? Sorry if this is a total idiotic question but, I'm trying...!
    Cheers

    Somehow your picture won't show.

  • Serial number copy functionality when creating return orders from standards

    Hi all,
    Serial number is not copying when i create return order from the standard orders in below scenario.
    I implemented one BADI for copying Serial number to Sales order when doing Post goods receipt.
    So after doing inbound delivery and PGR, serial number is copied to the sales order but when i create return order with reference to the Standard order Serial number is not copying.
    When i go VA02 for standard order and selecting the technical objects then if i create the return order serial number is copying.
    Please help me in the above issue.
    I used the following logic to copy serial number from inbound delivery PGR.
    UPDATING THE SERIAL NUMBER TO THE RESPECTINVE SALES ORDER LINE ITEMS
                CALL FUNCTION 'SERNR_ADD_TO_AU'
                  EXPORTING
                    sernr                 = lwa_sernr-sernr
                    profile               = 'NEOP'
                    material              = lwa_mseg-matnr
                    quantity              = 1
                    document              = lwa_mseg-kdauf
                    item                  = lwa_mseg-kdpos
                    debitor               = lwa_mseg-kunnr
                    vbtyp                 = 'C'
                    sd_auart              = lv_auart
                    sd_postyp             = lv_pstyv
                  EXCEPTIONS
                    konfigurations_error  = 1
                    serialnumber_errors   = 2
                    serialnumber_warnings = 3
                    OTHERS                = 4.
                IF sy-subrc = 0.
                  CALL FUNCTION 'SERIAL_LISTE_POST_AU'.
                IF sy-subrc EQ 0.
                  COMMIT WORK.
                  WAIT UP TO 2 SECONDS.
                ENDIF.
    Edited by: Rajesh Sanapala on Feb 16, 2009 12:48 PM

    hi.
    I have the same problem.
    Can you please share how you solved it?
    thank you
    Bill

  • I am trying to cut out an image with the pen tool and when i make a selection it selects the whole image and not the cut out. How do i stop this?

    The selection basically inverts when I dont want it to do that! Any help would be great, its becoming very annoying.
    Thanks

    It sounds like you need to change your path operations?
    Is it showing:
    change to:

  • Problems with backgroundColor in UI when creating a Solid layer in Timeline

    Hi all
    When you are running scripts that use the backgroundColor property to draw swatches (like colorLibrary and SwatchYouWant) and try to create a New Solid in TImeline, script panels go gray. This way, you cannot use the color picker to select your Solid's color. This was possible with versions older than Adobe CC. Anyone knows anything about this issue?
    Thanks.

    I have had the same issue but in Solaris 10 platform.
    In my case it was a hardened server, I had to use a non-root user with the minimal permissions.
    While my user didn't have permissions, DSCC always showed the error message you posted. I debugged for a while and the solution was to grant some permissions to the user that runs DSCC and cacao.
    You can navigate in DSCC because most pages in DSCC only depends on DSCC Registry to work. But when you need to register or start a directory server, DSCC executes dsadm and dsconf in the local machine (where common agent and ldap instances run).
    In unix, cacao calls suexec function and forks dsadm and dsconf processes with the user configured in each ldap instance. If cacao is not allowed to fork and to suexec, you'll get the error message, therefore I granted the user to execute "su" command and added the attributes "basic" with moduser.
    In windows it could be the same thing, but with windows stuff. I don't know how to debug and set permissions in Windows but I'm almost sure that it is the problem in your case.
    It could be that you are not allowed to fork programs if you are not registered in the domain. Please just check it and provide feedback.
    Regards.

  • When a gradiented shape layer is selected and I user the eyedropper the colours get weird, anyone know what this is?

    The first image is of the normal doc. It's just a round rectangle with stroke (stroke is a Layer Style)...
    The second is when an old gradient (blue) seems to get blended into the equation... Somehow, the fix is to restart photoshop but after a little time, this happens again... It's getting annyoing

    Same old, same old... Update your graphics driver or turn off hardware acceleration in the prefs and also check your color management stuff.
    Mylenium

  • What happened to the 'Shape Mode' shortcut keys on the Pen Tool?

    For the longest time I've used both the Shape and Pen Tools for drawing vectors in Photoshop, but with CS6 I noticed a lot of weird behaviours. The one that is really getting to me is the lack of 'Shape Mode' shortcut keys when using the Pen Tool. When on the 'Shape Tool', fo example Cirle or Rectange, you can press the Shift to change the Shape Mode to 'Add', Alt to change it to 'Subtract' or both together to get 'Intersect'. This functionality used to exist on the Pen Tool too, but in CS6 I can't seem to get it working.
    A collegue suggested to move over to Illustrator for all my Vector needs, and I know that this a good advice. However the lack of quick/integrated changing between 'Shape Modes' in either product (now) makes drawing things alot slower (for me).
    Am I missing something, or is this feature now ommited in Photoshop CS6. If it is does anyone know if its possible to script something to allow this kind of behviour in Photoshop or Illustrator?
    cheers,
    Jon

    The modifier keys "Alt|Opt", "Ctrl|Cmd" and "Shift" work differently depending on the tool being used but the individual keys seem to provide somewhat related functions.
    For example the "Shift" key tends to be a constraining key Rectangle tools are constrained to square ellipse tools to Circles. However if there is an Active selection when you hold down the skey when you drag out a new selection it does not reset the current selection instead the new selection is not constrained and is added to the current selection. Shift constrains Transform tool to current aspect ratio,  Shift constrains Line tools to vertical, horizontal or 45 degree angles. Pen tool like line tool shift constrains the angle.
    The "Alt|Opt" key changes the way tools operate. Transforms are from the center not from the side or corner being dragged.  Selection tools like the rectangle and ellipse will cause the intal drag out be from the center however it there is a Active selection dragging out a new selection will be subtracted from the current selection. This key changes the Pen tool from draw mode to anchor point adjusting.
    The "Shift" and "Alt|Opt" modifier keys can be used together to have an operation be both constrain and from the center.
    The "Ctrl|Cmd" key seems to change the way a tool works on a control anchor point.  The Pen Tool changes from Pen Draw mode to Direct Selection tool to facilitate moving the point.  Transform can be distorted a single corner point can be moved and distort the rectangle bounding box.
    These keys may have other functions I don't know about.  Photoshop has many features so many I don't know if any one person know and uses all of them. For the rest of us they seem to be Photoshop hidden secrets.

  • Pen Tool - PS CS4

    I don't know if I found a bug, or if it's just something I need to do differently, but the pen tool is not creating a new layer.
    It just seems to be there. I can modify the shape with the direct selection tool. But I can't apply a layer style or do any other modifications. It does not have a bounding box when I select the move tool.
    It's the weirdest thing... Anyone else experience this?

    I am having trouble with the pen tool in Cs4,
    It has been fine but then after a few hours I have been having
    a problem with the selection line (that it leaves behind) is not there?? is there something in the View / paths that I am missing?
    And at the same time,my viewing line that falls behind the magnetic tool is not working!
    It is driving me crazy and I know it is something so simple
    that I am not doing...
    Thanks to anyone that can shed some info
    Regards Nick

  • Pen Tool on New Layer Keeps Bouncing to Original Layer

    I'm on a Win 7 machine using Illustrator CC, using a mouse with the pen tool.
    I created some shapes on one layer, and now want totrace just the outside of those shapes on a different layer. It worked well enough on the first two shapes I did this with (both comprised of ellipses layered to create a particular shape) but on this third one, it keeps bouncing me back to the original layer. This is the only shape that includes straight lines but I can't think of a reason that would keep me from being able to trace the outline of shapes on a different layer. Any idea of what I might be doing wrong?

    I recreated the file this morning so that you could see. I was kind of hoping I wouldn't be able to reproduce the problem either, but it's still happening. I don't see a way to attach the .ai so I'm including a screen shot, but will happily attach the file if someone tells me how. The screen shot doesn't seem as if it would be of much assistance.
    I made the shapes on a single layer (named "Shapes) in red. I then created 3 layers, one for each outline. I outline them using the pen tool and black. The plan is to delete the "Shapes" layer when I'm done since the red shapes are only there to make tracing the heads easy.
    The top image was traced with the pen tool on the layer "Outline 1." I didn't trace the middle one this time but if I had, there would be black tracing around the outside of it on "Outline 2". I began the tracing with the pen tool for the bottom image on "Outline 3" but as soon as I continue the line from the circle to the straight line, I'm immediately shifted to the "Shapes" layer and everything I've just traced in black is brought there with me and turned red.

  • Fill drawing created with pen tool

    How do you do this? I use my pen tool to draw out a shape,
    and I close it's path, but I can only control the stroke. Surely
    there's a way to fill that space in right? What am I missing? If
    drawings made by the pen tool cannot be filled, that is definitely
    something Flash developers need to look at improving in CS4.

    OK nevermind. just like always, it only works until after I
    post.

  • Pen Tool - autocreate layer?

    I've been using Photoshop for about a decade now and I have yet to experience a problem like I'm having now with the pen tool.
    When you place your first node, it makes a layer... but in CS4 (or at least my version) it isn't. I can create the entire shape, but no layer is created. The move tool doesn't show it as being anything that can be moved or modified (layer style anyway, I can use the direct selection tool).
    Is anyone else having this issue??
    Thanks,
    Kristal

    Thanks, Scott. I just figured it out and was rushing back here to delete my somewhat dumb post. Hopefully it'll keep my default settings.. that was odd. :)~

Maybe you are looking for