LAN with TCP/IP doesn't work

Hello,
I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
Thank you very much

Perhaps you could describe you network in a little more detail.
Is this a Workgroup home network or are you connected to a Domain server?
If this is a workgroup are you connecting to the internet via a cable or DSL router?
Do other computers on your network connect OK?
Has your S10e ever worked properly on the network?
Are you connecting via a wireless access point or LAN cable?
What do you Ping on and from where?
Can you Ping OK on another networked computer?
Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address.

Similar Messages

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card

In day 4, video # Creating "pages" with Flex states doesn't work

i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem

Hi,
I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

More information please.
Version of Reader? OS? Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application.

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Hello lila54,
It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it. I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
Join a network
http://www.apple.com/support/iphone/assistant/wifi/
If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

TCP Read doesn't work sometimes

Hi Everyone, I have a problem where my build .exe doesn't work on some computers but works fine on others. it uses a tcp connection to grab data off a custom server program which packages bluetooth data.
The program build works fine on my development computer as well as another desktop, but on a 3rd computer the code simply doesn't read the data from the server. I've disabled windows firewall but i have no idea what else to try - anyone have this problem before?
Solved!
Go to Solution.

That tells me there was a driver you did not install on the other computer. LabVIEW 2013 tries to automatically figure out what drivers you need when you configure an installer. This issue does not sound like it had anything to do with the TCP/IP.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

HT1688 The friend brought to me from the USA iphone 4. I can't use it at all. It with our operators doesn't work. I very much ask you help me to solve a problem.

The friend brought to me a gift from the USA, and it doesn't work year. Our operators don't understand it. Help me to unblock iphone4
<Edited by Host>

This has nothing to do with iPhones in the Enterprise.
Sounds like your friend is a bit dumb and bought a carrier locked iPhone. The only way to address this is to contact the carrier to whom the device is locked and find out their unlock policy.
Oh, and stop being dumb yourself, posting IMEI, serial numbers, and email addresses on a public forum is just plain stupid.

Forgot my adminpassword, i have tried the reboot with initial disk doesn't work i can't downlad anything, I am able to log on but the name and password to get in my computer doesn't work for admin password. i am about to give up any suggestions?macbook10

forgot my adminpassword, i have tried the reboot with initial disk didn't work, i am able to get into my computer with name and password, but this same name and password doesn't work as an administrators password when i want to download or change things.
do you have any suggestions? Im about to give up, i can't even access wireless have to use a dsl
pretty sad

... this same name and password doesn't work as an administrators password when i want to download or change things.
It's probably that your Keychain password is not the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Change user's OU with punctuation mark doesn't work by Rename User View

Hi,
I have problem with moving user between OU by Rename User View when punctuation mark in name of OU is used.
I have own WF that assign user to specific OU depending on value of Select component. When value of this component is changed (against previous value) I call Rename View, that assign user to new OU. For OU without punctuation mark Rename View works OK.
After finishing WF with punctuation mark in OU this Error appers:
java.lang.RuntimeException: There is no such object on the server.
But creating new AD account (by role assignment) in OU with punctuation work OK. In select component is rule that replace puctional character in correct form.
Select component:
<Field name='slctOrganizationalUnitUzivatele'>
                <Display class='Select' action='true'>
                    <Property name='title' value='Nastavte organizacni jednotku:'/>
                    <Property name='allowedValues'>
                        <block>
                            <dolist name='zmena'>
                                <invoke name='listResourceObjects' class='com.waveset.ui.FormUtil'>
                                    <invoke class='com.waveset.session.SessionFactory' name='getServerInternalContext' />
                                    <s>OrganizationalUnit</s>
                                    <s>AD</s>
                                    <null/>
                                    <s>false</s>
                                </invoke>
                                 <rule name="RUL nahrada znaku">
                                    <argument name="inputString">
                                        <ref>zmena</ref>
                                    </argument>
                                    <argument name='hledanyRetezec'>
                                        <s>\,</s>
                                    </argument>
                                    <argument name='nahrazovaciRetezec'>
                                        <s>\, </s>
                                    </argument>
                                </rule>
                             </dolist>
                        </block>
                    </Property>
                    <Property name='sorted'>
                        <Boolean>true</Boolean>
                    </Property>
                </Display>
                <Default>
                    <upcase>
                        <ref>user.accounts[AD].ad_container</ref>
                    </upcase>
                </Default>
            </Field>
WF-Rename User
<Activity id='10' name='renameUzivatele'>
        <Action id='0' application='com.waveset.session.WorkflowServices'>
          <Argument name='op' value='checkoutView'/>
          <Argument name='type' value='RenameUser'/>
          <Argument name='id' value='$(user.waveset.accountId)'/>
          <Argument name='authorized' value='true'/>
          <Return from='WF_ACTION_ERROR' to='error'/>
          <Return from='view' to='renameView'/>
        </Action>
        <Action id='1'>
          <expression>
            <block>
              <set name='renameView.accounts[AD].identity'>
                <ref>newDNrecord</ref>
              </set>
              <set name='renameView.resourceAccounts.currentResourceAccounts[AD].identity'>
                <ref>newDNrecord</ref>
              </set>
              <set name='renameView.resourceAccounts.currentResourceAccounts[AD].selected'>
                <s>true</s>
              </set>
              <set name='user.global.OrganizationalUnit'>
                <ref>slctOrganizationalUnitUzivatele</ref>
              </set>
            </block>
          </expression>
        </Action>
        <Action id='2' application='com.waveset.session.WorkflowServices'>
          <Argument name='op' value='checkinView'/>
          <Argument name='view' value='$(renameView)'/>
          <Argument name='authorized' value='true'/>
        </Action>
        <Transition to='nastaveniPristupu-overeni'/>
        <WorkflowEditor x='193' y='343'/>
      </Activity>
<set name='newDNrecord'>
                <concat>
                  <s>CN=</s>
                  <ref>user.global.fullname</ref>
                  <s>,</s>
                  <ref>slctOrganizationalUnitUzivatele</ref>
                </concat>
              </set>Do you have any ideas?
Thanks Petr

Hi,
I discovered following:
- if name of OU in AD is without space (e.g. test,sample) so DN record is test\,sample and user is moved into this OU.
- if name of OU in AD is with space (e.g. test, sample) so DN record is still test\,sample and user isn't moved.
So problem is with empty space. How can I preserve space in DN name? I found something in documentation but I doesn't work for me.
+Special Characters in FieldValues
If you have a field value with a comma (,) or double quote (") character, or you want to preserve leading or trailing spaces, you must embed your field value within a pair of double quotes ("field_value"). You then need to replace double quotes in the field value with two double quote (") characters. For example, "John ""Johnny"" Smith" results in a field value of John "Johnny" Smith. +
(from IDM Business Administrator's Guide, p.77)
Guided this information I put value of slctOrganizationalUnitUzivatele into "". But this didn't work. Is good idea to have space in DN?
Thanks for help.
Petr
Edited by: petrklinkovsky on Sep 10, 2009 5:06 AM

Filter Web Template with URL Cmd: doesn't work with compound infoobject ?

Hello all,
I've to filter the query contained on a web template with URL command, but it doesn't work.
The web template contains only one query, and on the free chars I have 0PLANT.
I call the web template adding to the normal url the following command:
&FILTER_IOBJNM=0PLANT&FILTER_VALUE=33
where 33 is the code of the plant I want to filter.
The command is executed, I think, because the result is "NO APPLICABLE DATA FOUND". The fact is that when I execute this query on the Bex filtering 0PLANT by value 33 the data exists.
May be because 0PLANT on our system is in compound with 0SOURSYSTEM ? In this case, what's the value I can use as filter ?
Thank's in advance,
Max

Hi,
please see http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/frameset.htm
especially:
If the variant with ending 'EXT' is selected, the fully compounded value has to be entered in the external format, for example, 24.12.2000.
If the ending 'EXT' is not used, the fully compounded value has to be entered in the internal format, for example, 20001224 for 24.12.2000.
and
In the internal display (see table below) you can easily determine the name of the characteristic and the filter value using the URL parameter &snippet_operations=%20 (see also Object Tag for the Properties of Web Templates). Call the Web application with this URL parameter. If you filter using the context menu, the parameters FILTER_IOBJNM and FILTER_VALUE are automatically added to the URL in the Web browser. You can then use the desired values with Command URLs in hyperlinks.
Heike

The application uninstaller ,created with Labwindows CVI, doesn´t work after upgrading to 2010 version

Hi,
I have been working with Labwindows CVI 2009 with no problem but after upgrading to 2010 version I have the following problem:
When i´m going to execute the unistaller, either from Windows Control Panel or directly from the uninst.exe icon, it doesn´t work. The PC thinks a few seconds and does nothing, and it happens with all the applications I build with Labwindows CVi 2010.
Thanks,
Asier
Solved!
Go to Solution.

Hello -
Are you installing these distributions on a non-English operating system? If so, the first thing to try would be the workaround listed on this known issue.
The known issue only lists Italian OSs as the troublesome OS, but it could actually happen on many different non-English OSs. I will update the text accordingly the next time I update the known issues list.
NickB
National Instruments

Change Background_Color with set_*_property doesn´t work with NLS_LANG UTF8

Hi @all,
we changed our forms from we8iso8859p1 to utf8 and now we noticed that changing of background colors from canvases, items etc don´t work anymore.
I tried set_canvas_property, set_va_property, set_item_property.
When I start the form with NLS_LANG: GERMAN_GERMANY.WE8ISO8859P1 changing the colors works.
When I start the form with NLS_LANG: GERMAN_GERMANY.UTF8 changing the color don´t work.
We use Forms Version 6.0.8.11.3.
Are there any workarounds to change the colors when nls is set to utf8?
Thanks
Thomas

Hi,
I discovered following:
- if name of OU in AD is without space (e.g. test,sample) so DN record is test\,sample and user is moved into this OU.
- if name of OU in AD is with space (e.g. test, sample) so DN record is still test\,sample and user isn't moved.
So problem is with empty space. How can I preserve space in DN name? I found something in documentation but I doesn't work for me.
+Special Characters in FieldValues
If you have a field value with a comma (,) or double quote (") character, or you want to preserve leading or trailing spaces, you must embed your field value within a pair of double quotes ("field_value"). You then need to replace double quotes in the field value with two double quote (") characters. For example, "John ""Johnny"" Smith" results in a field value of John "Johnny" Smith. +
(from IDM Business Administrator's Guide, p.77)
Guided this information I put value of slctOrganizationalUnitUzivatele into "". But this didn't work. Is good idea to have space in DN?
Thanks for help.
Petr
Edited by: petrklinkovsky on Sep 10, 2009 5:06 AM

Impdp work with system but doesn't work with another user

Hi,
We have troubles with import of transportable tablespace, when i try to import it with system the import is done currectly, when i try to use another user we receive this message :
impdp bmcese/***** directory=TTS_DIR dumpfile=RMCCO_RMC_ANA_STS_ABB_CO121001.dmp TRANSPORT_DATAFILES=/data/TTS/RMCCO_RMC_ANA_STS_ABB_CO121001.dbf logfile=tts_imp_proc.log
ORA-31626: il job non esiste
ORA-31633: impossibile creare la tabella principale "BMCESE.SYS_IMPORT_TRANSPORTABLE_05"
ORA-06512: a "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: a "SYS.KUPV$FT", line 1020
ORA-00959: tablespace 'RMCCO_RMC_UTZ_PP080531' inesistente
this happens only on development server and it work into test server, so i don't think that the problem is in grants(i controlled that are the same and i have tried with DBA grant too and we received the error).
Another strange thing is that tablespace 'RMCCO_RMC_UTZ_PP080531' is not included into the dump that i try to import and it doesn't exist in the database.
Thx
Edited by: user11272630 on 10-ott-2012 8.40

I've extraced the role/privs granted to BMCESE using this query
select granted_role from DBA_ROLE_PRIVS where grantee='BMCESE'
union
select privilege from DBA_SYS_PRIVS where grantee='BMCESE';
Result on Server where the impdp doesn't work:
GRANTED_ROLE
CONNECT
CREATE ANY TABLE
CREATE PROCEDURE
CREATE SESSION
CREATE TABLE
CREATE TABLESPACE
CREATE TRIGGER
CREATE VIEW
DATAPUMP_IMP_FULL_DATABASE
DROP TABLESPACE
EXECUTE_CATALOG_ROLE
EXPORT FULL DATABASE
IMPORT FULL DATABASE
IMP_FULL_DATABASE
QUERY REWRITE
RESOURCE
UNLIMITED TABLESPACE
results on server where the impdp work:
GRANTED_ROLE
CONNECT
CREATE PROCEDURE
EXECUTE_CATALOG_ROLE
IMP_FULL_DATABASE
UNLIMITED TABLESPACE
BMCESE has more grant and privs on the server where the impdp doesn't work.
I've controlled the grant of read, write on the directory.
I've tried to give DBA priv too to the user.
So i don't think in a priv problem, i think that the problem is in the unexistent tablespace reported in the error.
Someone has another suggest to give.
Thx

LAN with TCP/IP doesn't work

Similar Messages

Maybe you are looking for