Landscape mode

Recently when playing music on my ipod 5, it gets stuck in landscape mode and I am unable to access my playlists or music controls. Cannot get it out of landscape mode, even exiting music and then going back doesnt fix this. Is there a way to get it to stop going into landscape mode? I don't use it and it is getting very annoying!

If you have downloaded ios 7, then bring up the control center and there should be an icon with a lock on it. Tap that and it should restrict it to portrait. With ios 6, double tap the home button quickly, swipe the bottom row to the right until you find the lock icon, tap it, and it should do the same

Similar Messages

  • IPhone 6 month view in landscape mode??

    hello, was wondering if there is a way to view an entire month in landscape mode on the  regular iPhone 6 just like we can on the iPad?? Couldn't find it and would love this feature if it doesn't exist. I don't schedule things by the hour. I think the screen is plenty big for this and the month view in horizontal mode is useless since the little dots won't show colors.
    Thanks for any info!

    I haven't found a way to display the whole month in landscape view on my iPhone 6. May not exist. You can send feedback to Apple about this here:
    http://www.apple.com/feedback/

  • Keyboard won't react when in landscape mode on SMS?

    Hi There.
    I updated my 5S to the IOS8.
    After that, I had problems when writing an SMS. Sometimes (almost every time) the keyboard doesn’t react to anything when turning to landscape mode. I then have to turn the phone upright, and the down to landscape again. The screen then goes black, and I can press the home-button to see the screen again.
    I actually thought this was a bug in IOS8 since it appeared after the update.
    Now I bought the IPhone 6. And I set that up with the complete backup from my 5S. I then updated to IOS 8.0.2, and the problem is also on my IP6
    I can’t find anyone else with this problem, so what can I do now?
    Is the only solution to reset the IP6 to factory default, and install sms, and contacts via iCloud?
    But then I have to install all the apps manually?
    I have a lot of apps with personal settings, and different mail accounts. I really don’t want to do all this.
    Anyone have a solution?
    Kind regards.

    Same issue here. Just did the download now I'll hit the alpha key on the screen and it does not register. Only happens in landscape mode. Only tried it on imessage and SMS, did not try email yet.
    - iPhone 6 w/ 128GB
    - Purchased directly from an AT&T Store, in US
    - iOS 8.0.2 (12A405)
    - Native iOS Keyboard
    - No other keyboard app installed or previously installed
    - Predictive typing activated

  • Problem with rotation and landscape mode in iOS 8

    From start of iOS 8 I have got problem with rotation in my iPhone 5S 32GB as well as in my iPad mini retina 32GB. Automatical rotation to landscape mode is not working correctly. For example if you take the phone or tablet to landscape mode in base display and tap to Safari, Mail, Messages, the app will start but stay in normal mode, not landscape. Then you have to back the phone to normal portrait mode and back to landscape and only then the phone do the landscape mode. I have never seen this problem in iOS 7 or older.
    Could you help me anyone with this problem? Or is the problem generally in iOS 8.
    Thanks a lot
    Jakub

    Brian, thanks, but it's not a rotation lock issue - at least not relating to the rotation lock setting. It's just a general use setting. Right now i have my iPhone propped in landscape mode. If I now hit the home button, essentially returning to a portrait setting though my phone is still positioned in landscape, then open any other app that supports landscape, that app WILL NOT orient itself to landscape mode. It will stay in portrait mode. The phone has to be physically oriented to portrait, then back to landscape for the app to register landscape mode properly. This is a glitch, and not a rotation lock issue. it ought to be noted that this was not an issue in iOS 7 or any previous iteration.

  • How to print a report in landscape mode?

    Hello everybody,
    I have a task where in i need to print a report in LANSCAPE format.
    I have tried to print the report output but i could not found an option to set LANDSCAPE mode and also how to change the font size.
    Can anybody suggest me the approach?
    Helpful answers will surely be rewarded.
    Thanks in advance.
    Sanghamitra.

    Hi
    If you are using the command MEW-PAGE PRINT ON
    then we can give this layout options
    like
    NEW-PAGE PRINT ON
    DESTINATION <printer name>
    immediately 'X'
    KEEP IN SPOOL 'X'
    LAYOUT 'X_65_132'  (OR X_65_255)
    RECEIVER SY-UNAME
    NO-DISPLAY.
    OTHERWISE WHEN YOU SELECT THE PRINTER
    IN THE PRINTER PROPERTIES/SETTINGS BASICS-> PAPER
    you will have this facility to select LANGSCAPE/PORTRAIT
    use that and print
    Reward points for useful Answers
    Regards
    Anji

  • CRVS2010 Beta 2 - report does not print in Landscape mode correctly

    I am using Crystal Reports Beta 2 for Visual Studio 2010 on Windows XP. I am trying to print a report in landscape mode. The WPF Crystal Report Viewer displays the report correctly in landscape view. When I print it, it moves all the data to the center of the page, prints it in smaller font and to the left and cuts off a lot of the data on the right hand side.
    I have tried various different suggested solutions from reading other forums and nothing seems to work. Is this a known Crystal Report Viewer issue?
    Solutions I have already tried:
    1. Page setup under Crystal Reports - selected no printer (optimize for screen display)
    2. Page setup under Crystal Reports - checked dissociate formatting page size and printer paper size
    3. Setting paper orientation and page orientation at run-time to landscape.
    4. Printing to different printers
    Something to note, I can export this report as a .pdf file and it prints perfectly from adobe. This only seems to be an issue when printing directly from the WPF Crystal Report Viewer to the printer.
    Any help would be greatly appreciated! I have been stuck on this issue for a while...
    Thanks!

    Hi Sharon,
    There have been issues with printing and printers in CR 2008 and the same routines are in CR 2010. The patches we have done to help with standard paper sizes in CR 2008 are not in the Beta releases.
    Not sure if they will make it into the GA release next month. As a work around I suggest you continue exporting to PDF and then printing the PDF file until they have been resolved and patches are available.
    Thank you
    Don

  • Landscape mode not attainable

    From FILE -> Page Setup -> I select "Landscape," but the view remains in Portrait mode and I am not able to work in Landscape mode. I found one solution here that says I have to set the width and height for Landscape... any ideas as to WHY landscape isn't working?

    Hi Yvan - I am using the latest Appleworks for OS X, 6.2.9. Also, the post you referenced is the one I had already read telling the reader to manually set the width and height for landscape mode. I'm wondering why I can't simply choose "Landscape" and have the view in Appleworks change to Landscape? Landscpe is a standard feature in all page setups for all applications! Seems to me it should work without having to manually set it to a pre-determined width and height. Any suggestions?

  • I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

    I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

    This could be from having restrictions enabled. Icons completely disappear when "restricted"

  • Is there a way to hide the bookmarks bar in iOS 8 on the iPad? It takes up a large part of the screen when in landscape mode

    Since I upgraded to iOS8, my iPad screen permanently shows the bookmarks bar down the left. This means I can only use about ⅔ of the screen when in landscape mode. Is there something I am missing which allows me to hide/show the bookmarks bar? Thanks

    TThank you so much! I felt it must be something straightforward.

  • How to print PeopleSoft page in the landscape mode automatically???

    hi
    We have a requirement from the client, who wants to get it implemented urgently.
    The peopletools version is 8.16 and appversion is 8.0 The requirement is as follows:Whenever the user prints on the Print button on a page, the page should get printed in the landscape mode automatically
    Thanks
    Lakshman

    You need to write HTML and JavaScript code for this, the code will display a print dialog box, from print dialog box you need to select the landscape and click on print.
    Jayaprakash Tedla

  • How can I prevent the softKeyboard from going full screen in landscape mode on mobile app?

    When I put an Input TextField on stage in an ActionScript Mobile project and click on it, the softkeyboard comes up but behaves differently when in portrait or in landscape.  In portrait, the softkeyboard comes up and allows me to edit my field without hiding.  In Landscape, the softkeyboard goes into fullscreen mode and I can no longer see my app in the background.  I would like for Landscape mode to bring up the softkeyboard but not overlay my app with a text area.  Is there a way to configure this?

    My app runs in landscape and I hated the default Android behavior so I used a heavily customized virtual keyboard instead. It's a bit slow but it works:
    https://code.google.com/p/as3-virtual-keyboard/

  • [iPhone] How to change Portrait / Landscape mode.

    I am tring to change view mode between portrait and landscape mode.
    UIViewController has two UIViewes and I want them to be shown as a landscape mode.
    I found the property of interfaceOrientation in UIViewcontroller.
    but it is readonly.
    Is there a way to change view orientation not with info.plist but with code.

    You can call setStatusBarOrientation on the UIApplication class and then set your landscape view.

  • IPhone 4 stuck in landscape mode

    For the last couple of days my iPhone has been stuck in landscape mode.  No matter what I do it will not switch out of landscape.  I've tried shutting it off, closing apps and even restored my phone but whenever I go into an app it automatically switches to landscape.
    Anyone else have this problem????
    Thanks

    Double click the home button scroll over to the audio controlls there is a button on the left that looks like a reload button that locks the orientation

  • IPhone Apps in Landscape Mode on iPad

    With the new high resolution display, why won't the small iPhone apps rotate to landscape mode? This is incredibly annoying when I have my iPad docked and I need to run one of these apps. There's plenty of resolution to rotate the app to landscape!

    You can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • IPhone keyboard in Landscape Mode

    Hey,
    Is any one else having the same issue ? Any solution is appreciated. When I use my iPhone keyboard in landscape mode (application - gmail) some of the letters in the keyboard don't pop-up. The keyboard inputs the letters in the mail however the on-screen prompt for a key being pressed (letters jumping up) does not happen. It happens for different letters each time. I have seen 'q' key do that .... r some times etc. It is not just the first row of letters too. I have seen other letters.
    I reset the phone, restored it and even got a warranty exchange. I still have this issue. Any ideas ?
    Peace...

    Link below is the official Gmail Mobile Development Blog. So you may find some contact or feedback info there.
    http://gmailblog.blogspot.com/2008/01/new-gmail-for-iphone.html

  • IPhone test in landscape mode

    Hi,
    I use Device Central to test my site "through the eyes of an iPhone user", and it works just as expected. Question: Is there an option to view my site on a mobile phone held horizontically, will say: in landscape mode? For the life of me I can't find such an option. I would ask in the Device Central forum, but there seems to be nobody there. If somebody knows of another working emulator that has this feature, I'd be glad also. Thank you for your time.
    Christoph

    Apple has it's own iPhone and iPad emulators when you become an Apple Developer for the iOS platform and download the SDK.  The application comes with an annual fee.  I am sure that you can view your application in landscape mode in those emulators, but there are definitely other Windows-based emulators although I am not sure which ones support the "new" iPhone 4 (screen resolution I'm talking here).
    If you develop your site in Flash and export it using the iPhone Packager there is an option for Landscape, Portrait, or Auto orientation as well as Full-Screen mode.  Flash's iPhone packager can be unreliable though if you don't code your ActionScript properly.  This iPhone packager is only available on Flash CS5 Professional.  The iPhone packager also has the option to choose "iPad" as an output device.

Maybe you are looking for

  • Why can't I access the "webpage" and "bookmarks" tabs in Safari on my iPad2?

    Sometimes when I'm using Safari, I can't access other webpages that I already have open. I click on the tab multiple times, but I stay on the current page. I also can't access any of my bookmarks (basically, none of the buttons next to the search bar

  • Character Setting Problem ( mysql + tomcat )

    Hi all; I am using mysql dbms and tomcat web server(servlet). But in my web page, the characters are shown broken. I set the character set of the mysql database. They are shown well in the dbms console. And also I set the html code with appropriate c

  • Master with Detail Tab Pages

    I have a master with multi-detail pages. I would like to have the master record appear on the top of each screen and have the user select one of the multi-tab pages to select which detail information they would like to see. Is this possable with Form

  • Reason For Movement

    Dear all I have a Query regarding Stock Posting MB1C when i am Trying To post the Stock With 561 movement type its asking for Reason For Movement How to remove this or Hide this With Out Asking Please help me with Regards Pushpalas

  • SSIS problem - Script Component - The value is too large to fit in the column data area of the buffer

    I am trying to run a task in a package, however there is a problem come out, see any one meet this before ?