Laptop slipped off dresser restarted would not load windows 7

my laptop slipped off dresser to floor and when i restarted it would not load windows 7 i tryed restore that didnt work i did system recovery iit still want start and says bootmanager missing also i think it lost windows 7 from factory
by the way it slipped off one of those non slip holder with fan to keep cool

Hi,
The 301 error code would indicate that the Hard Drive is failing and needs to be replaced.  This is also consistent with the start-up issue and is a pretty common occurence after a 'fall'..
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
 If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • IWeb crashed - all 'disappeared' and would not load.

    iWeb crashed - everything 'disappeared' and would not load. I purchased 09, and have the files for the original iWeb site (which is still active) because I published them to a domain. What is the best/easiest way for me to put all the pages back into iWeb on my laptop so that I can update them. Because iWeb is so easy and I'm stumped when anything starts HTML-ing me!

    What is the best/easiest way for me to put all the pages back into iWeb on my laptop so that I can update them
    There is no best or easy way to get webpages back into iWeb because you cannot import webpages.
    Copy/paste the text and objects from your existing pages is the only way.
    But just to be sure, check the domain file in this folder:
    ~/Library/Application Support/iWeb/
    (where ~ is our Home directory) and see if it still there. Double click the file to open it in iWeb.
    If it fails, then you're out of luck.

  • When i went to oxygen network, i tried to watch an episode of a show but it would not load and they play button is ineffective, what should i do?

    when i went to oxygen network, i tried to watch an episode of a show but it would not load and they play button is ineffective, what should i do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - If you can redownload it by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    The delete and redownload

  • I am able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. How can I fix that?

    I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?

    Hi there mayway3000,
    You may find the troubleshooting steps in the article below helpful.
    iPod does not play content purchased from the iTunes Store
    http://support.apple.com/kb/TS1510
    -Griff W.

  • I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load

    I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load in the edit Projects window.  I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
    I have contacted apple support and they tried to do a few things... to no available.
    With my limited knowledge of file structures I assume that the header file must be corrupt.
    Is there a 3rd party utility that can decompile and fix the file structure so it will load properly.  I've been working on this project since june and would hate to have to redo the whole thing again.

    I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load in the edit Projects window.  I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
    I have contacted apple support and they tried to do a few things... to no available.
    With my limited knowledge of file structures I assume that the header file must be corrupt.
    Is there a 3rd party utility that can decompile and fix the file structure so it will load properly.  I've been working on this project since june and would hate to have to redo the whole thing again.

  • The CD for iPhoto 2, iMovie 3 would not load in my Apple iBook Dual USB.

    The CD for iPhoto 2, iMovie 3 would not load in my Apple iBook Dual USB.
    It was "NOT AUTHORIZED".
    Can anyone tell me what this means?
    Thank you

    Take another look. A (nominal) 10 GB hard drive only has about 9.31 GB to begin with. The OS takes up some room, as do other applications.
    Please check out how much space has been used and how much remains available.

  • HT1199 I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE. It would not load and said the following. System extension cannot be used.

    I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE.
    It would not load and said the following. System extension cannot be used.
    The system extension "/system/library/Extensions/AppleUSBthernetHost.text" was installed improperly and cannot be used.
    Please try reinstalling it, or contact the product vendor for an update.
    I do not have a copy of the OS X 10.6.8 software. It is second hand so I have no product vendor to contact.
    What can I do?

    You recently updated iTunes to v.11.4? This message has popped up on many a Mac screen when this version was first made available, because this kext was obviously faulty.
    You should try to download iTunes 11.4 again from Apple's website: the new version bears the same name, but this kernel extension has been updated, and the issues it was causing are now a thing of the past.
    Should solve your problem, too...

  • Non-native printer driver would not load

    Hi,
    I have a PowerPC G4 and two printers, an Epson Photo R220 and an Epson C60. The OS is 10.4.8. Several days ago I reset my printing (using the printer setup utility) and then tried to reload the Epson drivers. The drivers from Epson would not load. The only drivers that do load are the ones that apparently come with the OS and are labeled with ' ... Gimp-print v5.0.0-beta2'. These drivers do not produce the same quality of printing as the Epson drivers I had before.
    Downloading the most recent driver from Epson did not help, neither did any order of resetting the printer utility, re-installing, and rebooting the computer.
    The gang at the local Apple Store could not solve the problem either!
    Any suggestions?

    Thanks for your reply.
    What I came to was that I needed to uninstall the direct usb driver set up I had made for my printer and then start from scratch. While I was doing this (which turned out to be very difficult) with an HP tech he mentioned an HP wireless printer that he thought would work much better for what I wanted.
    So I exchanged the HP officejet Pro 5400 for a DeskJet 6980 and this is a great solution, because I don't even have to connect through the Airport with a USB cable. It's all wireless and the quality of the printer is good and price is reasonable. Set up was difficult but HP has good tech support even for mac and they helped me out.
    Now if any in my office wants to add this printer it's available as a bonjour printer and they don't even have to load to drivers.

  • Other programs would not load itunes music

    I used to own a macbook then i got an iMac and copied everyting to it. now when i use iphoto or other programs music from my itunes library would not load. only the content purchesed from itunes store. any one can help?

    When I am in garage band I can not load my iTunes library to make a ringtone.  What do I need to do to change this?
    Which version of GarageBand are you using?
    You should be able to drag iTunes songs directly from the Media Browser to the track area in GarageBand. There are two exceptions - you cannot drag protected songs to GarageBand (with Kind: Protected AAC) and you cannot drag songs, that are not locally stored on your Mac but in iCloud.
    All there songs should be visible in the Media browser and you should be abe to drag and drop them, at least in GarageBand 10.

  • Websites would not load unless I move my cursor for Firefox RC

    Whenever I load a website, I notice that unless i move my cursor a little, the website would not load. I didnt notice this for previous versions of FF though.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Finder would not load

    i have a client that is running os 10.2.8. When he booted up, finder would not load. It loaded for a second then closed and repeated this indefinitely. I could access any of the items in the dock and those applications would open and run correctly, but the finder never seemed to load. I eventually fixed the problem by reinstalling 10.2 and that fixed the error. However this gave rise to another peculiar symptom. I could not install the combo update for 10.2.8. It would start and then just fail and ask me to try again?
    Does anyone know what might have caused his finder not to load properly?
    how might i install 10.2.8?
    O and if it matters, he was running all of this on an old powerbook G4.
    Thanks in advance!
    Alex

    Jag and Puma were notorious for having permissions problems. They have decreased in Panther and I understand that Tiger is even better. When the system that is booted won't do what is supposed to do then try the install disk.
    X is a strange beast. I don't know if it still happens but in the earlier days it was frequently necessary to not only erase the hard drive but zero it. Somehow the left over files were recognized (or something) by an install or clone and raised havoc with the new system.
    It's weird because without a directory, which erase is supposed to do, how can it still find files???
    When I have problems cloning to a partition with stuff on it, I erase it and the clone proceeds but I always wonder if some left overs are still being used somehow.

  • K7N2G will not load windows xp with any type of dvd/cd drive installed?

    This is on my old computer, the specs are as follows
    k7n2g
    athlon 2600+
    radeon 9700 pro
    Caviar SE wd800
    1gb samsung ddr333
     It does not matter if it is keyed as master or slave, primary or secondary my old k7n2g will not load windows with a cd drive installed. I have tried three different drives and everything that I can think of, changed cables, channels, drives, everything. Windows just hangs. I cannot even get into safe mode. Is this an IRQ problem? The drives keeps trying to eject themselves, no matter what kind I use. This has never happened before, but there was a point before this problem where the vga wouldn't kick on (at the login screen) until I hit eject on the cd drive. This is driving me crazy and I have a girlfriend who just has to play her stupid sims and will not stop bothering me about it. PLEASE PLEASE PLEASE help me!
    Thanks
    Chris
    PS here is my NEW workstation (I couldn't be happier to get rid of the old system)
    two Opteron 250 90nm
    2gb 2-3-2-6 Corsair Reg/ECC DDR 400
    Tyan Thunder K8WE
    1x BFG 7800GTX OC (one for now)
    Audigy 4 Pro
    Seagate Cheetah U160 10k 73.4 gb
    Atlas V U160 18.3 gb
    Lite on Dual Layer burner

    Your Tyan based hardware listing on the first post has no relevance to anything, and might only serve to confuse. Please remove it and put the hardware you are trying to troubleshoot in a signature. Look in your profile>Forum Profile Information and enter that in the Signature box. That way we wont have to scroll to hunt down your hardware specs
    So let us get this straight.
    This system used to work fine? Yes? Then what prompted you to reload the OS?
    You mentioned that didn't happen when you owned it. Are we to assume that at some point you sold or gave parts of this system to someone else? If so, what changed?
    A little more history might prove useful in helping us to give you better suggestions.
    Look at the PSU and give the Amps for the +3.3, +5v, & +12v lines.
    ***Edit, from what I see on the net, that is a dual rail PSU and the amps are as follows:
    [email protected], [email protected], [email protected], [email protected]
    Is this correct?
    Both the 3.3 and +5v seem a little low to me, but I am not entirely convinced that would be your problem. However, the fact that the 12v rails are split, can lead to other problems such as overvoltage protection circuitry getting in the way. Especially if the 16amp 12v rail is overloaded.
    This is something to consider. Just because it is supposedly capable of wattage over it's rated power output doesn't mean it can handle what you're throwing at it all at once. If you have a single rail PSU that has at least 18 amps on the 12v rail to test with, we could almost definitively rule out power as the sole problem or a contributing factor.
    I have never had a CD rejected, but if you could be more detailed about what you have connected to the board while attempting to load the OS, and then a detailed description of at what point the OS installation fails, and the CD is ejected, that would be helpful as well.
    The fact that you've tried several drives, cables, with the same result. And also had a blackscreen event, does point to at least one problem that could point to a power issue. The CD rejection issue is foreign to me since I usually use the same type of PSU in all my builds or ones that I know work with a particular set of hardware, so I can't attribut that to a power issue.
    Did you try clearing the CMOS and then initialize the default settings?
    Do you have a cheap AGP card to try instead of the 9700?

  • After upgrade to 3.6.9 Firefox would not load

    After allowing the update to 3.6.9 Firefox did not automatically reload.
    Nor could it be loaded manually.
    I restarted my pc to see if that made a difference.
    A Firefox update box flashed up and disappeared (sorry I didn't see the detail.
    Firefox would still not load.
    I downloaded a new Firefox Setup (using IE) and reinstalled.
    Works fine now.
    Have others experienced problems with this update?

    We are currently typing on the computer we have been discussing about in our microblogs; which is a Window 2000 Professional OS. Apparently, the problem is not completely resolved, because we removed the Firefox Browser from it. But due to the update, we are also experiencing Security Certificate Issues as well. Following the update on or around Sept. 10th, 2010, we notice that the Firefox Browser constantly asked for a security certificate verification on frequent web pages we visited. Well, apparently this situation is continuing on a totally different Internet Browser. This computer is clean of virus(es) & malware...so that is not the issue. We suspect that the update from Firefox may have change some internal security configurations in Windows Operating Systems. Noting the Comment from a Window 7 user, the Firefox Bug has possibly caused internal issues in all Windows Operating Systems.

  • Photoshop stopped working when I tried to download CC which would not load either!!!

    I AM VERY FRUSTRATED. First...My CS5 would not read RAW on my new Canon T3i camera so I tried to find a fix. Then...that did not work s I decided to upgrade to the CC! Well after trying to get it to load I am told the I need to close the "Bridge.exe" in Photoshop CS5. I can't find it. After a huge lot of frustration I decided that I would delete and reload all of the Photoshop programs!!! Well that made it even worse...NOTHING WORKS! THIS IS MY TRAVEL COMPUTER AND I NEED TO BE ABLE TO WORK ON MY IMAGES.
    I NEED T TALK TO SOMEONE WHO CAN WORK WITH ME. So Far I have spent a lot of time trying to get the help I need as your site is not user friendly and I don't like "Blogs" with information from someone who can't help with my problem directly. Also I upgraded to Element 11 and can't get that to work either. So far I have spent a lot of money and I am not happy.
    Rinda Webber

    Rinda Webber do you receive any specific error messages when trying to download and install the Creative Cloud Desktop application?  You can find information on how to install the Adobe Creative applications included in your membership at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Keypad not working and 10.4.6 would not load

    I tried installing 10.4.6 onto my 1.83 GHz MacBook Pro to fix a problem I had with my system preferences, and when trying to restart my computer, it would not restart. I had to wipe my hard drive clean and reinstall 10.4.5, which started working fine until some of the keys in my keypad randomly quit working. The keys "z x c v b n m , . " will all randomly start and staop working, making it an absolute nightmare to type anything at all. I want to know if anyone else is having these problems, and if my notebook is defective, how do I contact Apple to see about getting it replaced. I've had numerous problems occur with this notebook and have no idea if it's me or the computer itself. Can anyone please help me?
    MacBook Pro   Mac OS X (10.4.5)   1.83 ghz 1GB RAM

    Welcome back.
    Try this. Go to http://www.apple.com/support/downloads/macosx1046comboforppc.html and download the update. Try to reinstall it. If you get the same message, create a new admin user account, log into it, and try the installer again. If that works, then the problem's with the original user account. Then, run Software Update and bring it up to 10.4.8. If still no luck, then use the install disk that came with your machine and do an Archive & Install installation, saving user and network settings—this will require running Software Update to get up to the latest version. See http://www.apple.com/support/tiger/install/ for installation details.

Maybe you are looking for

  • What should i do? i do not know what happened with my external hard after connected with mac OS...

    hello...I am new user of mac OS...I connected my external hard with my laptop...After that my hard detected but there is no space and no files, everything. It has only one .exe file but it is giving error...even it is same on Windows...i have some ve

  • Can i merge two apple itunes account into one

    I have two different itunes accts. I would like to merge them into one. So that all my music is located in the same place under one apple Id/itunes account. Please help.. by the way some of my music under one id is on a pc and the other is on a mac.

  • Flat File as Target - MultiRecord Type

    How do I write from Oracle into a Flat File as Target where the data in Flat file is a multirecord type. For ex. Sales Order header and Sales Order Line info. I tried to do this by using a Joiner to the sales order header, line and items table and th

  • XI: RFC -- JDBC communication deep structure

    Hello to all! I've got a RFC <--> JDBC szenario. Insert an update statements work fine. Now I want to implement a "SELECT"-statement. Therefore the XML-SQL-statements needs a <key>-tags such as: <key>    <col1>value</col1>    <col2>value</col2> </key

  • BPC: Changes to comments allowed although worstatus set to CLOSED

    Hallo Community, I have a problem concerning the use of comments in combination with the workstatus functionality. ------ Setup is as follows: We have defined two workstatus: OPEN = All rights given (data entry, comments, etc.); controlled by owner a