Laptop will shutdown but won't restart

I bought a Toshiba Satellite T-Series but when I ask it to restart it automatically shuts down.  Please help

Try to remove all the storage devices and see if you can enter the BIOS menu.
If not, then it's likely that sending it to the service center will be your only hope.

Similar Messages

  • MSI GE70 Laptop will start but won't boot

    Hello
    I've had my GE70 for almost two and a half years now and it has recently started to show a few problems.
    A couple weeks ago the laptop started to freeze whenever I moved it too abruptly, particularly when holding/pressing the case near where the HDD is installed.
    Now, I took it on a trip with me, and when I tried to turn it on, the fan would spin, the CD/DVD drive would run, and the power light would also turn on, but it wouldn't boot (won't even get to BIOS, just a black screen). The laptop doesn't boot because capslock/numlock lights do not turn on. The HDD seems to be working because its light blinks once as soon as I try to turn it on.
    I've tried:
    1. Swapping memory card slots
    2. Removing the memory cards and turning on (motherboard does not beep, is that a signal that something's wrong with the motherboard?)
    3. Reseting the EC
    However, nothing seems to work. Can't send it to a MSI repair shop because I am currently living in Brazil and apparently there's no MSI official repairer here.
    Any ideas on how to solve the problem?
    Thanks!

    Try to remove all the storage devices and see if you can enter the BIOS menu.
    If not, then it's likely that sending it to the service center will be your only hope.

  • Mac Pro will boot but won't restart.

    When waking up or doing a soft boot my Mac Pro will chime and sound like it's booting but the display will never come on.
    If I do a cold boot, or even hold down the power button to force it off and then boot it's fine. I've tried turning on and off and plugging and unplugging the monitor. I've repaired permissions and reset the SMC and PRAM. It's been happening for a while, but now I want to install MacFUSE and it requires a restart to finish installing.

    Which model Mac Pro? GHz?
    How much RAM?
    What display card? What display?
    What USB devices (these have a strong reputation for interfering with sleep)
    What FireWire devices?
    Have you run the diagnostic on the Installer DVD to rule out Hardware problems? Instructions are on the face of the DVD.

  • I can not play a video on my iPad mini. It will load but won't play

    I can not play a video on my iPad mini. It will load but won't play

    Which video, in which format, trying to play how in the Mini?

  • HT201401 Problem with my iPhone 4S volume, my phone will vibrate but won't ring...

    I Have a problem with my iPhone 4S volume, my phone will vibrate but won't ring. IS IT EASILY REPAIRABLE?

    if it play when you connect a headset
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more
    https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

  • Intel Mini starts fine, but won't *Restart* after serious upgrades

    Experienced Mac user, but stumped with this one:
    Picked up a fairly cheap Intel Mini Core Duo to use as a HTPC.
    Upgraded the CPU to a T7400 Core 2 Duo, removed the internal SATA drive and added an external 1TB SATA drive in a NewerTech V3 Stacker case as the primary drive for the machine. Installed Leopard, which went fine. Machine has 2GB RAM and boots up just fine. *All is good, except that the machine won't Restart. Starts just fine. Shuts down just fine. But it won't restart.*
    I've attempted to zap the PRAM using the old Command-Option-P-R, but all I get is one chime; it won't cycle through multiple times. I've tried resetting the PMU (using the remove cables/wait/insert power cable while pressing power button/press power button again method, but there is no change in the restart behavior. So I'm stumped and could use some suggestions for other things to try.
    Anyone on here done any similar upgrades and/or seen similar behavior? Did I forget to reconnect a wire somewhere? If I crack the case again, is there a manual reset I can perform on the PMU? BTW, the behavior is the same regardless of whether the HDD is connected.
    TIA,
    mosk
    Message was edited by: mosk

    Thanks, tried that (and tried it with the CMOS battery removed), and it didn't solve the problem. I'm stumped. I've tried resetting the SMC, which also had no effect on the problem. If I try to zap the PRAM using the traditional four key chord, it will shutdown (with power light still on) but won't reboot. Same if I choose Restart form the Apple menu: it gets the job half done, but won't reboot. So it seems to be a very specific failure: something in the Restart sequence is hanging up, while the Start and Shutdown sequences work fine.
    A puzzler...

  • Vista laptop sees printer but won't connect

    Vista laptop sees printers on xp server network but won't let me connect telling me "access denied" and "you do not have sufficient rights to perform this operation". What's up with this?

    Yes, getting XP and Vista to share correctly is no small feat.  I don't think you have a printer, printer software or driver problem.  I think you have a Windows sharing problem.  Have you googled for solutions in other areas?  Microsoft's forums?
    I was able to help someone else yesterday with this post (and some of their ingenuity as well).  Maybe it will help.
    Message Edited by PrintDoc on 09-08-2009 08:45 AM
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • DVD will read but won't write A205-S5812

    My DVD drive will read and play but won't write. Device Manager says it is a Matshita UJ-850S. I have upgraded to XP Pro sp3 from vista. I suspect that it is a driver issue but I have searched and can't find one that makes it work.
    Has anyone else run into this? Any suggestions
    Solved!
    Go to Solution.

    Borsiay wrote:
    My DVD drive will read and play but won't write. Device Manager says it is a Mat**bleep**a UJ-850S. I have upgraded to XP Pro sp3 from vista. I suspect that it is a driver issue but I have searched and can't find one that makes it work.
    Has anyone else run into this? Any suggestions
    Not a driver issue, or it wouldn't even read.  You are missing the program required for disk writing that Toshiba suppiles with factory installs, but is lacking in commercial versions of Windows.  It is not available as a download, only as part of the factory image.  Since you changed to XP, You'll need to buy some disk writing software like Nero or Roxio.

  • Can't reinstall OS X, will download but does not restart

    So my internal harddrive was screwed.
    First, I booted with Mac's recovery, erased everything and tried to reinstall OS X. It downloaded but didn't  restart like it was supposed to and just took me back to the utilities screen.
    Next, I installed OS X Mavericks on an external, then from the desktop I opened disk utilities, partitioned the internal hard drive and erased it. Then I downloaded Mavericks from the App Store, and it automatically restarted and installed but didn't start for over an hour so I reset the Mac and went to recovery mode and there was problems with verifying and repairing.
    Finally, I booted with external's recovery and tried to reinstall OS X to internal HD but it downloaded all the way then went back to the OS X utilities screen. I can't start up with internal because it does not show up and when I restart the computer and hold option on my external shows up.
    How on earth can I just install OS X?

    Sounds like either your internal HD is failing or has some errors that Disk Utility can't fix.
    You could try Techtool Pro 7 , which can occasionally fix a hard drive that disk utility can't.
    If that doesn't work, then I'd replace the HD.

  • HT201210 Iphone 4s connected to laptop for update, but won't complete...in recovery mode...says if I restore will loose media. Want to do a app transfer, but won't allow, Have things I do not want to loose if I restore to factory settings.

    Hi! I have connected my 4S to laptop to do software update, but it did not complete. says that phone is in restore mode and that if i continue restore to factory settings, i will loose all data. I have apps and media that I did not transfer but I don't seem to be able to get back and do this. Can anyone help?

    Your data in your iPhone is losing in recovery mode, and it is hard to restore.
    It is difficult to say it can recover all your data, but you can only have a try. That is a third iPhone data recovery software.
    http://easy-iphone-recovery.blogspot.com/iphone-recovery-resource.html

  • Macbook will turn on and off but won't restart so i can apply a system update.

    lately i've been having trouble with my macbook pro retina display early 2013 model running 10.9. i've had a system update available for a while now but when i try to update the app store will download the update and prompt me to restart but when i try to restart my mac does nothing. i've tried manually updating by downloading the update directly from apple.com, but i get the same result. if i use the restart command from the menu bar apple drop down i get the same result. i can force a restart by holding down power, but the update doesn't get installed. i've tried running a disk check and it repaired a few things and says the disk is fine now, however i still can't find a solution to this very frustrating problem.

    bump? i've been trying to figure this out with google and a few friends and have made no progress.

  • Hp officejet pro 8600 plus will print but won't scan.

    Recently I had some kind of software conflict with my printer in Windows 7 so I deleted it and reloaded the printer software. I selected enable scanning at set up. It is a network printer and everyone can print to the printer. When I went to scan today the printer sees my computer and will let me select scan but I get a screen error on the computer and then the printer says the scan was unsuccessful. I checked the IP address which of course is good.
    The Error says "Scanner Unreachable" X Scanner communication cannot be established. Ensure your product is powered on..... If you are installed using a cable check it...... If you insalled this printer by IP address then you might need to update IP address....... If you are running firewall software, it may be blocking the scan communication. Go to HP.com/go/wirelessprinting for help. -"
    I turned off my firewall and my virus software and I get the same error. I restarted the computer, router, modem, and printer a couple of times. The frustrating thing is the printer sees the computer from the touch screen but just won't complete the scan.
    Any suggestions?

    Hi AccessRE,
    Please let me take a moment to say "Welcome" to the HP Forums. I hope you enjoy your experience!
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having an issue scanning to the computer over the wireless network.  Please click on the following link for A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
    Please write me back if you are still having issues.
    If I don't hear back from you today, I hope you have a great Monday.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My HP officejet pro 8600 will print but won't scan wirelessly

    My officejet pro 8600 will print and scan with a usb connection. It will also PRINT when connected wirelessly but it doesn't  SCAN wirelessly. Running OS X Yosimit 10.10.2. thanks  John

    Thanks John!
    I'm still curious as well, do you get that same error regardless of initiating the scan from the printer or the software?
    At this point, I will suggest that you try resetting your printing system (don't re-add the printer just yet) and then perform a verify/repair of your disk permissions. Once those complete, restart your Mac and then add the printer back to the queue.
    Try scanning again via the HP software and then the Apple software. Please also ensure you try initiating the scan both from the printer as well as the software and let me know if there is any difference, thanks
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • IMac G5 will chime but won't do anything else-

    Hi all! Before posting I made sure to read as much as I can in this forum & various sites so that I won't be repeating a previous post. So I apologize in advance if I do. So on to my problem…
    When I press the power button on my iMac G5, the chimes go off, but the screen stays black. Then after a few minutes, the fan goes full blast. Here are the different things I've done.
    a. Plugged and unplugged the power cord and used different outlets.
    b. Reset the SMU
    c. I followed the instructions from http://support.apple.com/kb/ht2173 (I don't know if this matters but LED 1 and 2 light up)
    d. I inserted the "Mac OS X Install Disc 1" to run Disk Utility but nothing seems to happen when the disk is inside (I do hear the CD being read and spun around). I couldn't get passed step 1 with the instructions from this previous post http://discussions.apple.com/message.jspa?messageID=11426662
    I've had problems in the past and most of the time it's fixable. But nothing seems to be working now. Are there any other tips or suggestions you all might have?
    Thanks for your time, I greatly appreciate it!

    dapnoyqpid,
    So everyone has given you very good diagnosis and repair paths. If you look at Jim Warholics site and determine that you have bad capacitors. (Be aware that just a tiny bit of doming will indicate a bad capacitor.)
    So if after you survey all the capacitors in your iMac you find that you have just a few bad ones you can buy the kit from Jim and attempt your own repair.
    Read this thread first:
    http://discussions.apple.com/thread.jspa?threadID=2287036&start=0&tstart=0
    Now I recently got 2 iMac G5 20" 2.0 GHz machines donated that both had the capacitor problem. They both had the RAM maxed out at 2 GBs so I was licking my chops as they were sorely needed at the school for a video GarageBand class.
    I took both of the backs off and surveyed the capacitors. One had two bad ones but the other had 12! I actually had a bad 2.0 GHz 20" iMac w/ a bad power supply sitting in my "to be repaired" area. It also only had two bad caps on the logic board.
    In starting the removal of the two bad caps I was reminded how difficult this process was so I just heated the through board leads until I could move the leads up to that I had about 1/4 inch of a gap between the bottom of the cap and the logic board. I then cut the leads off as close to the bottom of the cap as possible and tacked soldered the new caps on. I used a Xacto knife to do the cutting. Be very careful of fingers and don't cut the logic board (Did that on an old G3 iMac and it was very dead afterwords) or damage any of those tiny SMT parts.
    Here's some pictures:
    http://s291.photobucket.com/albums/ll306/spudnuty/iMac%20G5%20capacitor%20repair /
    Turned out these caps had to lay down since they were in the area where the spring loaded box where the foot attaches.
    Those two iMacs are now back in action and ready for the summer camp video students.
    The one with the 12 bad caps is now at the back of my "to be repaired" area waiting for a day when I'm really bored with nothing to do.
    Good luck.
    Richard
    Message was edited by: spudnuty
    Message was edited by: spudnuty

  • Print issue... will print, but won'trint something,

    Hi all,
    I just bought an Epson Stylus NX215. I installed the drivers etc, and everything seemed peachy keen. However, if I go to print something, it comes up with the usual window but when I click "print" it just shows the button being clicked(or depressed, whatever you want to say) and it won't print. I can print test pages, and "alignment" or whatever pages but I can't print documents. THis is throughout all applications. Thanks in advance.

    HI,
    It's likely the printer drivers are not compatible with 10.6. Go to the Epson site support area and look for driver downloads. Hopefully they will have an update soon.
    Try here for more information.
    http://support.apple.com/kb/HT3669
    Carolyn

Maybe you are looking for

  • Nokia e6 OVI store and email problem

    I just bought a Nokia E6, but I have trouble connecting to the store and adding my email. Whenever I try to open the OVI store, it asks for an update. So select download, and it tries to download and install, but when it's almost done installing, it

  • Problem with bluetooth connection between iPhone 5s iOS 8.1.2 and MacBook Pro (Mid 2012) Yosemite 10.10.1

    After the upgrade to iOS 8.1.2 in iPhone 5s and OS X 10.1.1 Yosemite (MacBook Pro Mid 2012) can not connect my iPhone 5s to the MacBook, the iPhone tells me: "The MacBook is incompatible" or the message "Connection Error, Make sure the Mac is turned

  • TDS quaterly revise returns

    HI, if any thing mistake in quaterly returns, how we revise in sap, which t code we want to use. please reply Regards, Prema.d

  • DataGuard 10gr2 (10.2.0.4) AIX 5.2-primary Aix 6.1-Standby possible?

    We currently have 10.2.0.4 DG configuration running on three AIX 5.2 servers (one primary, two standbys). We will be installing some new servers that will be pre-loaded with AIX 6.1. If we were to install 10.2.0.4 on these new AIX 6.1 servers is it p

  • Smtp auth - relay

    Hi! We are running GWIA novell-groupwise-gwia-12.0.1-103731. Relaying is denied in the GWIA-settings. We tested the GWIA behavior. If we do an SMTP-Auth against the GWIA and the authentication is successful, relaying is allowed. In the GWIA "Access-C