LARGER Exported File sizes

I recently upgraded to LR V2 (also use PS CS3)
For some reason my exported file sizes have increased immensely
Typically I would convert from RAW to TIFF with the following settings:
11" x 17" print size
compression: none
Adobe RGB1998
16 bit
resolution 300 DPI
These files would convert at about 90MB (manageable on my system)
They are now converting at a whopping 400MB (aging system can't handle this!)
Is this the new LR V2 standard, is there some setting I need to change?
Any help greatly appreciated.
Rich

No, you must be doing something wrong there. 300 ppi (NOT DPI!) at 11x17 and 16 bits uncompressed should be 90MB as you can calculate with simple math. If you enable compression (highly recommended for tiffs - it's lossless compression) you should be able to cut that in half.

Similar Messages

  • SSRS report Excel Export file size is huge

    Hello everyone,
    I am facing an issue with SSRS report exporting  to Excel.
    Issue : Exported file size is too big.
    I have a matrix report ( parametrized report ) it fetches data from multiple table.
    initially when
    1) I select all parameters all values
    2) load the report after that
    3) exporting to excel
    so exported file size was about 10 Mb to 12MB
    Now, suddenly from this month exported file size is too big around 62 MB for same data,
    I checked on different forums and tried the solutions but it didn't worked,
    can anyone please suggest me on this.
    My environment is
    Visual studio (BIDS) 2008
    SQL Server 2008 R2
    Excel 2007
    Thanks

    Hi UdayKGR,
    According to your description, when you export a report into an excel file, the exported file size is too huge. Now you want to reduce the file size. Right?
    In this scenario, do you export the report into excel 2003 file? When reports are first exported and saved to Excel 2003, they do not benefit from the file optimization that Excel automatically applies to its *.xls workbook files. The larger file size can
    cause problems for e-mail subscriptions and attachments. To reduce the size of the *.xls files for exported reports, open the *.xls files and then resave the workbooks. Resaving the workbooks typically reduces their file sizes by 40 to 50 percent. Also please
    try to install the Reporting Services 2008 R2 Service Pack 2 and reduce the merged columns in exported excel file. For more information, please see the links below:
    Exporting to Microsoft Excel (Report Builder and SSRS)
    problem
    regarding the size of exported report from reporting services to excel format
    SSRS Export to Excel - Performance
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Large folio file size

    We are half way through a book that comprises 100 single page articles. However it is already nearly 500 MB and this isn't sustainable.
    Does the following affect the file size:
    Is the Folio file size affected by the number of individual articles, would it be smaller if we had stacks of say 10 articles each with 10 pages rather than 100 single pages?
    Every page has a two picture (JPG) object state, the first image is an extreme elargement of the image that visible only for a about a second before the full frame image appears. Each page has a caption using Pan overlay that can be dragged into the page using a small tab.Does an Object State increase the file size over and above the images contained within it?
    We have reduced the JPGs to the minimum acceptable quality and there is no video in the Folio.
    Any ideas would be much appreciated?

    800 MB worth of video sounds crazy.
    Of course, a high number of videos can bring you to that.
    I saw bigger dps apps. I think the apple limit lies around 4 gb (remember,
    that is more than 25% of a whole 16 gb iPad)
    The mp4 video codec does a really good job while keeping the quality high.
    And the human eye is more forgiving to quality when it comes to moving
    images compared to still imagery.
    I wrote a collection of tipps and ideas how to reduce your file size.
    http://www.google.de/url?sa=t&source=web&cd=1&ved=0CB4QFjAA&url=http%3A%2F%2Fdigitalpublis hing.tumblr.com%2Fpost%2F11650748389%2Freducing-folio-filesize&ei=uVbeTv_yD--M4gTY_OWbBw&u sg=AFQjCNHroLkcl-neKlpeidULpQdosl08vw
    —Johannes
    (mobil gesendet. fat fingers. beware!)
    Am 06.12.2011 18:32 schrieb "gnusart" <[email protected]>:
       Re: Large folio file size  created by gnusart<http://forums.adobe.com/people/gnusart>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4067148#4067148>

  • Large export file created during expdp

    Hi,
    When i execute datapump export for a single table it will make 5.6G export file size. While there is only 39K rows in the table. When i import this export file to another scehma it takes only megabytes. More than 98% size reduction. This is mytable sctructure.
    ods.mytable
    tb_ID NUMBER(22),
    p_ID NUMBER(9) NOT NULL,
    N_ID NUMBER(9),
    D_NAME VARCHAR2(255 BYTE) NOT NULL,
    FLAG VARCHAR2(1 BYTE) NOT NULL,
    BODY CLOB
    Most size taken by CLOB. Looks like most of data is shrinkable. How can i shrink the table to reduce the table size?
    Thanks in advance

    You can use Shrink or Move option of alter table command
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#i2192484
    thanks
    http://swervedba.wordpress.com/

  • Large .bpel file size vs performance

    how does large .bpel file size affect performance,say that I have a process of .9 mgb size with around 10000 line how does this affect the instance creation ,fetching and message creation during the process life cycle.
    Edited by: arababah on Mar 8, 2010 7:23 AM

    Johnk93 wrote:
    MacDLS,
    I recently did a little house-cleaning on my startup drive (only 60Gb) and now have about 20Gb free, so I don't think that is the problem.
    It's probably not a very fast drive in the first place...
    I know that 5MB isn't very big, but for some reason it takes a lot longer to open these scanned files in photoshop (from aperture) than the 5MB files from my camera. Any idea why this is?
    Have a look at the file size of one of those externally edited files for a clue - it won't be 5MB. When Aperture sends a file out for editing, it creates either a PSD or an uncompressed TIFF after applying any image adjustments that you've applied in Aperture, and sends that out. Depending on the settings in Aperture's preferences this will be in either 8-bit or 16-bit.
    As a 16-bit uncompressed TIFF, a 44 megapixel image weighs in at a touch over 150MB...
    Ian

  • Large PDF file sizes when exporting from InDesign

    Hi,
    I was wondering if anyone knew why some PDF file sizes are so large when exporting from ID.
    I create black and white user manuals with ID CS3. We post these online, so I try to get the file size down as much as possible.
    There is only one .psd image in each manual. The content does not have any photographs, just Illustrator .eps diagrams and line drawings. I am trying to figure out why some PDF file sizes are so large.
    Also, why the file sizes are so different.
    For example, I have one ID document that is 3MB.
    Exporting it at the smallest file size, the PDF file comes out at 2MB.
    Then I have another ID document that is 10MB.
    Exporting to PDF is 2MB (the same size as the smaller ID document)... this one has many more .eps's in it and a lot more pages.
    Then I have another one that the ID size is 8MB and the PDF is 6MBwhy is this one so much larger than the 10MB ID document?
    Any ideas on why this is happening and/or how I can reduce the file size.
    I've tried adjusting the export compression and other settings but that didn't work.
    I also tried to reduce them after the fact in Acrobat to see what would happen, but it doesn't reduce it all that much.
    Thanks for any help,
    Cathy

    > Though, the sizes of the .eps's are only about 100K to 200K in size and they are linked, not embedded.
    But they're embedded in the PDF.
    > It's just strange though because our marketing department as an 80 page full color catalog that, when exported it is only 5MB. Their ID document uses many very large .tif files. So, I am leaning toward it being an .eps/.ai issue??
    Issue implies there's something wrong, but I think this is just the way
    it's supposed to work.
    Line drawings, while usually fairly compact, cannot be lossy compressed.
    The marketing department, though, may compress their very large TIFF
    files as much as they like (with a corresponding loss of quality). It's
    entirely possible to compress bitmaps to a smaller size than the
    drawings those bitmaps were made from. You could test this yourself.
    Just open a few of your EPS drawings in Photoshop, save as TIFF, place
    in ID, and try various downsampling schemes. If you downsample enough,
    you'll get the size of the PDF below a PDF that uses the same graphics
    as line drawing EPS files. But you may have to downsample them beyond
    recognition...
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • Bloated PDF Export File Size

    I just exported a 2 page file that contained 3 graphics and
    text. The file was an 493K in size and could not be made any
    smaller using Adobe Pro 7.0. This is amazingly large since the old
    Buzzword graphic PDF output was 393K. I then exported the file as a
    Word document and then printed a PDF output using Adobe Pro 7.0 and
    the file was only 95K.
    This new PDF export feature is a disappointment. It produces
    way larger file sizes than any PDF produced by an Adobe desktop
    application. Why is it so inefficient?

    RLarimore,
    Sorry to hear about your disappointment about this feature.
    This problem is known and I think Adobe/Buzzword team would be
    improving it in future releases (though I don't know their
    time-line or feature priority). This was the first cut
    implementation of this feature - and nobody knew what folks would
    want to see improved first. I guess now we know :).
    What would most likely be the problem: Fonts embedded inside
    the PDF are subset-embedded but not fully optimized and that would
    have led to big size. Fonts are difficult beasts to tame, and I am
    sure they would be tamed someday.

  • Exported file size/Lecture Capture

    I have been doing some lecture capture using iShowU which captures my laptop screen and simultaneously capturing the audio on an iPod with an XtremeMac mic. I prefer to do it this way rather than capturing the audio with a wireless mic in the iShowU application, given some unpleasant experiences with computer crashes with large Powerpoint files. I have then melded the two using iMovie and want to export as a QT. However the export time is incredibly long. For a 6 MB video file and 45 MB audio file, it takes 2 hours and I end up with a 92 MB file! Any suggestions welcome, as I am new to audio/video software.

    I have used the drop-down menu that appears when "exporting" and selected the jpg-original size option
    When you export a version with "jpg-original size", Aperture will render a new file, with the pixelsize (width and height) of your original image file, but tat does not necessarily mean that the file size will be equal to the file size of the original image file. The filesize will depend on the jpeg quality setting. The lower the quality value, the smaller the file size.
    I'd suggest you check your "jpg-original size" setting. When you are sharing or exporting, select
    "jpg-original size" and then set the Export preset to "Edit". Check, if the "size to"  is really set to "Original size" and check the jpeg-quality.
    Regards
    Léonie

  • Very large Keynote file size

    One of my Keynote files has grown to 704 MB and now takes forever to save. How can I reduce the size of this file? I suspect some photos in the file are larger in MB size then they need to be.
    Thanks

    You'd need to try exporting your images from iPhoto as smaller images before using them in Keynote. I'm not sure if there's a simple way to compress the images that are already in Keynote.

  • Export file size is different from the original raw size

    Could someone explain to why, when the original size of a raw file in a folder is about 11mb. But when in Lightroom is shows about 7.1mb. When I export it to a jpeg the size becomes around 3.5mb.
    I know that sRAW1 file is 7.1mb as stated in the book. But why does it go down to about 3.5mb when exported to jpeg.
    Is there a way to export it to the a higher size? Like 7.1
    I used sRAW1 in a canon 50D.
    Thanks,
    Ray

    The "actual" size of you images file is measured by this basic formula, 8-bits is one byte. Each pixel has one byte for the Red, one byte for the Green, and one byte for the Blue colour channels. So, we have 3 bytes per pixel. Multiply the total number of Mega Pixals of your camera's sensor by 3 and you have the true size of an 8 bit image file.
    How this image will end up in a final file size depends upon the amount of compression you choose to apply.
    The more complex the image, the harder it is to compress without some degradation of image quality. So the original size of an image will not always be a guide to its size when compress. For instance an image with little or no sharpening applied will compress to a much smaller size than the same image with a large amount of sharpening even though the same compression settings were used on export.
    If you wish to resize your images on export from LR in specific megapixals (and therefore MB's) then LR/Mogrify has this functionality.
    There is a nice simple explanation of this here

  • Export file sizes

    Hey guys... Can anyone suggest the best quality, smallest file size export for use on the internet from FCP 4. MPEG-4 seems quite large!

    hello.
    There are lots and lots of threads about this topic. If you use the search facility you will find everything you require.

  • Aperture and Toast titanium exported files size reduced

    I have tried to look up the answer to this but can't seem to find one. I am relativly new to aperture.
    I am dragging 150 photos from the aperture window into toast titanium 8 to put them on CD for a friend to print off. When I do this the file sizes are reduced from between 2.5 - 3.5 MB down to 400-500k. The quality still seems quite good for a slide show but not brilliant for large prints. Is ther another way to get them burnt to disc or am I being really stupid?
    I am using aperture 1.5.3
    Gary

    Thanks Ian, that cretainly gives me a way to do it but it now adds another half hour to the process while I wait for the 150 photos to be exported to a file so I can then drag them to be burnt! I dare say if I was clever I could get automator to do it for me in the background, thats for another day!!
    It also throws up an other interesting point, when exported at the original size they seem to double in MB from roughly 3.5 to 7 (without metadata). However if I export them at 95% of the original they actually export at about two thirds original which is just about right for the prints required.
    I have no idea why but now I know it happens I can dial in my settings accordingly....
    Gary
    Message was edited by: Gary.huston

  • Large export file when application contains a BI Publisher report

    Anyone have an idea why an application export file grows dramatically when a BI Publisher report template is added to an application? I have an application that was 400+ KB and went to 88+ MB just by adding one report query and RTF template. This results in taking over an hour to import the application.

    Each RTF Report layout is converted to an ASCII string to allow the import routine to load the rtf as part of the application.
    If your template has any embedded graphics e.g. a logo then this SIGNIFICANTLY increases the size of the ASCII encoding of the template.
    Hope this helps.

  • Why is the exported file size so small?

    Hello!
    I just spent the last few days watching about three hours of Adobe Premiere Pro CS3 tutorials and almost all five hours of the Adobe Encore CS3 tutorials on Lynda.com with the awesome 30-day trial that I received for purchasing these two programs. I pretty much got to the end of authoring my first DVD with Encore, but the file size is so small that it doesn't even take up the full size of a single-layer DVD and I was expecting to be using double-layer DVDs.
    Here's why I didn't post this in the Encore discussion: My two file sizes are 10GB and 8GB. I have them both as single timelines in Premiere Pro and exported them each to Encore. But why does the file size decrease to just over 1GB for each of the files in the Export to Encore option in Premiere Pro CS3?
    I begin a brand new project in Premiere Pro, import the 10GB .avi, and then do the Export to Encore with "DVD Double Layer", "Author with Menus", "Entire Sequence", "NTSC High Quality" with the quality level switched from 4 to 5, Video Codec = "MainConcept MPEG Video", 720x480, 29.97 drop frame, Lower, Standard 4:3, VBR, 2 Pass, the default bitrate settings of Minimum Bit Rate = 1.5, Target Bit Rate = 4, Maximum Bit Rate = 7, and then whatever GOP Settings are set to M Frames = 3 and N Frames = 15. Without any video editing at all, it estimates the file size at 1.7GB.
    If my goal is to get the file sizes closer to 4GB and 3.5GB, can I fiddle with any of these settings without screwing up the ability for all DVD players to read my disc? I thought it would probably be ideal to have them closer to 7GB and 6GB, and then let Encore downgrade the quality to fit all of the content on the DVD with very little room to spare. But why is there no default to keep the video resolution at the absolute best possible?
    Should I be exporting to a Movie instead of exporting to Encore?
    Thanks!
    Matt

    Patrick,
    After I installed and registered my software, I received this email twice for both Premiere Pro and Encore, and I would imagine that it would only make sense to receive this same type of bonus for Production Premium:
    "Thanks for registering - claim your benefit today.
    Adobe Systems Incorporated [[email protected]]
    Thank you for purchasing and registering your copy of Adobe Premiere Pro CS3. You now have a wealth of creative tools at your disposal. While taking advantage of online and printed resources we also encourage you to select a complimentary benefit. At Adobe we want you to get the most out of your software it's our commitment to you.
    Check out Adobe Bridge Home*, a feature of Adobe Bridge CS3.
    Get access to product tips, training videos, product news, and other creative resources all in one place. Simply click the Adobe Bridge icon within any application to get started.
    You got it, now get more.
    Hypatia Sans Font:
    Developed for customers who register their Adobe Creative Suite® 3 product, these unique and stylish fonts were inspired by the 1920s and '30s. Receive Adobe's new type family (a US$169 value) for free.
    Lynda.com Training:
    Take advantage of a free 30-day Online Training Library® subscription, including in-depth Adobe training in easy-to-use video format.
    Classroom in a Book® Series:
    Deepen your skills with this series of self-paced training offering step-by-step explanations, time-saving techniques and insider tips. Receive up to a 40% discount on Adobe Press' Classroom in a Book series."
    Thanks for the tip, Steven! I will try that now.
    - Matt

  • Preview:  how to find export file size?

    Odd that I didn't find a thread on "save-as".  Are they squashed? 
    I lament the loss of "Save as…", but I would be willing to accept the use of "Export…" wholeheartedly if I could predict the file size. 
    One of the main ways I use Preview is to normalize images without a lot of heady image editing;  colour tweaking, size, ratio, resolution, then save JPEG's for use in iTunes cover art.  The end of this task was normalizing an image file size as a JPEG.  Now, all I see is a slider that gives me a relative file size and no indication of the absolute range I'm working within.  The only way I view my desired file size is to export, then use Finder "get info" to see the file size as disk usage. 
    Is there a way to do this inside the Preview application, as a parameter of exporting, like I did before Lion? 

    Thought I'd complete this thread that I found unresolved.
    In subsequent versions, the absolute value is at the bottom of the export dialogue box. If it was there or toggled at the time I asked then I couldn't find it, but it is now so problem solved.  Currently running v8.

Maybe you are looking for