Laser jet P3015 printer problems

I have a HP P3015 and it defaults to Tray 1, and asking for Glossy paper. There is no paper in Tray 1, and it is shut.  For each print job, I have to press OK to change print trays, and OK again to print.  How can I clear these settings so that the printer will print from Tray 2

Menu
>> paper handling
>> Tray 2
>> Tray 2 type
>> choose plain
save

Similar Messages

  • What is the life expectancy of the hp laser jet p3015 printer?

    What is the life expectancy of the hp laser jet p3015 printer?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
    Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
    Some telltale signs that an AirPort has (or is about to fail):
    Status lights are not illuminated or do not match any of the known configurations.
    Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
    Unit refuses to intialize, even after performing multiple "factory default" resets.
    Weak or no wireless signal.
    Ethernet port(s) not functioning
    Etc.
    Also, are there any compatiility issues with newer models and G5/G4s?
    Three potential issues:
    Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
    Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
    Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

  • Hp Laser Jet CM1015 printing problem

    Hi Guys !!!I'll try not to make it long for you, pictures speaks for me.I would need to say that I had that printer since 2007 or a little after, the problem started after using some kids coloring program which prints the pictures after coloring it.  Any Ideas ?!!!Thanks

    Scanner 5 errors are caused by the scanner bulb not being able to find home.  Usually this an indicator that the scanner motor may be about to fail.  Usually a power cycle may resolve it temporarily.
    -Verify the CLJ2840 has the most updated firmware from hp.com.   There has been some firmware fixes in firmware to alleviate some scanner 5 errors.
    -When the scanner 5 error is not recoverable from a power cycle- the printer will need to be serviced with most likely a scanner sub assembly and possibly a formatter as well.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How do i install a hp laser jet 4l printer on windows7

    how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

    The driver is delivered through Windows Update as described here.  
    You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
    If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable.  The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can't print to hp laser jet 1020 printer connected to airport express

    Hello All - I recently bought an airport extreme so I am doing some re-configuring of my home network but I am having issues getting the desired out come.
    I have the airport extreme connected to the modem. From the extreme in another room, I have an airport express connected to the airport extreme wirelessly (I set that up through the airport utility without any problems.)  Now I want to connect my usb hp laser jet 1020 printer the airport express to print from.  I have a windows 7 machine.  I can see the printer connected to the airport express through the airport utility.  I have tried to use the bonjour print service to set up the print connection.  Bonjour sees the printer connected as well, I run through all the prompts and click finish, but when I go to print something, it goes to print que and nothing happens. (side note, the printer works just fine when connected directly to the computer).
    So I guess my question is, it appears the computer sees that my printer is connected to the airport express. But some point along the way, when I go to print, the message gets lost or goes to the wrong place. I am on the right track?  Any other suggestions?
    Thanks.

    Does "plugged into it" mean that the printer is connected using USB or Ethernet?
    If USB, have you run Bonjour for Windows to find and configure the printer?  (Pages 16-17 in the Setup Guide)
    Bonjour Print Services for Windows v2.0.2

  • How do I use my HP Laser Jet 4M  printer work with my OS 10.9 MacBook Pro

    A "newbie" here.  I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer.  HP apparently does not support the Mac's OS10.9. Any help appreciated.

    Ok, I've downloaded the drivers as suggested.but still not printing as it should.
    It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
    From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
    Meanwhile, any other advice.
    Regards

  • Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

    I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

    I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it.  Do you know what changed between 19.8 to 19.13? 

  • Hp laser jet M1005 my problem scan error 12

    hp laser jet  M1005 my problem scan error 12 

    Hello Rehantoheed,
    Thanks for the post.  With this one, we might need a little more information such as error message symptoms, what OS, copy fine?  If you are running OS 10.7 LION, I've included a link below that may assist with this scanning issue.  Good Luck!
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Hp Color Laser Jet 5550dn Print Quality Issues

    Good Afternoon,
    I have a Hp Color Laser Jet 5550dn that has some print quality issue.  I've attached a black and white scan, but the color is a light blue to blue that form the blotches.  On the back of the page there are blue and pink streaks.  
    I can print more sample pages or print them in color, but anyone have any idea what could be going on here?

    We are encountering a similar problem. The streaking is coming fromt the Cyan cartridge and has continued for over a year now, despite numerous cartridge changes and replacing the transfrer case. It is progressively getting worse and I have yet to find a solution to this problem online. Any help or guidance would be appreciated.

  • Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

    Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

    Hello k1watt,
    Thanks for using Apple Support Communities.
    From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac.  I defintely understand how frustrating this is, especially since printing is vital to your business.  The printer driver version 19.8 is the most current version available.  To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Deletethe affected printer, thenaddthe printer again.
    If the issue persists, try these additional steps:
    Resetthe printing system, then add the printer again.
    If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Troubleshooting printer issues in OS X - Apple Support
    OS X: Printer and scanner software available for download - Apple Support
    Take care,
    Alex H.

  • About getting hp Laser Jet 1320 Printer Driver Softwear

    Dear Team Leader,
    I have lost my HP Laser Jet 1320 softwear CD. I want do download from Internet. Would you please help me by showing an easy way to get it?
    Yours Ever
    Mr_Shehub

    Hello Bholla,
    Welcome to the HP Support Forums!
    I understood that you have recently installed Windows 7 again, since the LaserJet 1022n will not install. If you are getting "turn printer on" messages when the printer is on, you have to check the USB connection between printer and computer.
    Have you tried to installed using the HP full feature software and drivers for this printer? If not it is a free download: HP LaserJet Full Feature Software and Driver.
    Let me know if that works any better for you
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP 1300 Laserjet & HP 2605dn Laser Jet printers print density problem

    I have both an HP 1300 b/w and HP 2605dn color laser printer.  In the last week both printers have changed the output density. The 1300 print is coming out lighter than it used to, and the 2605 is not print the color tones as it used to. What used to be orange is now only yellow.Other colors are not right either. I can compare them to output a few weeks earlier, and they are much lighter and different color tones.
    Both printers have plenty of toner in all cartridges. The toner cartridge on the 1300 was changed 2 weeks ago. The toner on the 2605 is 3/4 full.
    This was like something got into the printer drivers and reset some parameters on both printers at once.
    Can anyone help me here to check this out and how to correct the problem?

    I have the same problem with my laser printer 2605dn.  the color is pale, i replaced the cartridges with original hp's but it did not help.  I also lost the capability of double side printing that I had when I originally loaded the printer drivers.  I noticed this all after I checked the internet for software updates for my printer.  Are there any solutions for these problems?
    please let me know.

  • HP Laser Jet 1020 printing again the last job

    Hello there!
    I have a printer HPLaser Jet 1020 which, after reboot, of the computer when switching ON the printer, it immediately begins printing the last job that was sent to the printer before the computer had been switched OFF.
    I have checked the printing queue before turning OFF the computer and it is empty.
    This problem does not happen every reboot, but happens very often and I haven't been able to find the pattern, nor the cause. I've tried it in two different computers and the same problem occurrs. Has anybody else had the same problem?
    By the way, I have Windows XP in both computers and the drivers have been downloaded from the HP web-site.
    Thanks!

    Hi, have you tried to disable bidirectional support'?
    Devices/Printer > right click your HP printer icon  > Printer Properties > Ports > uncheck 'enable bidirectional support >  APPLY    
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How do i make my hp laser jet p1102w printer wireless using bright house modem

    How do I make my printer wireless without having to hook the computer to the printer.  I have the Bright house moden and internet services.

    Hi,
    The printer supports wireless connection. Please use information from the following link to set it up:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02847467
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp laser jet 2100tn printer

    Hi there..I was wondering if there is a separate fusing unit for the HP LaserJet 2100tn printer??  I have a printer that is leaving a shadow mark on both sides of the page and I think that the fusing unit needs to be changed but I haven't been able to find any information on a fusing unit for this printer online..Any help would be greatly appreciated..Thanks..Bonnie

    @MB2006
    According the user guide, you can use a 9 to 25 pin adapter. Please refer to the user guide, pg A-19 for more information.
    Laserjet 4050 User Guide
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

Maybe you are looking for

  • How do i remove all traces of a print driver

    I need to remove all traces of my print driver for my canon printer. I loaded my canon iP pixma 4000R with a print driver i downloaded. It seems to be a japanese version as the paper standards are all a bit strange. No 4x6 option, instead, something

  • CRM activity Replication to R3

    Hi all, In my scenario activities are customized and being replicated in to R3. I need to check what are the changes done in the standard process to achieve this. What are the standard procedure for replcating activities? any FM or BAPI ?? kindly sen

  • Creating a "Drop Box" for different users

    I currently have seperate user accounts for my wife and I and a user account for all our photographs. What I would like to do is have a folder on our respective desktops that is shared i.e in my Photos account I drop a photo into the folder and then

  • Multiple selection in JComboBox

    Hi, Folks! I want to make my JComboBox to be multiple selected because there is a method called "getSelectedObjects()", but I don't know how to do it. Can anyone help me figure out how to do this? You help is much appreciated! Qun He

  • Detailed Level Navigation

    Hello, Anyone know how to set the DLN iView to have everything in the tree expanded by default (as opposed to closed). I opened up the par file to make changes using the tag library but I couldn't see any sap delivered code in it. Can any one guide m