Last night Adobe PS CC updated and it's acting strange
Adobe CC PS updated last night and so Adobe CC PS (2014) updated. Now when I upload to Bridge and open ACR I have the old sliders, not the new ones and my ACR Presets are acting strange and not working like they were before. Does anyone know why? Should I try to delete one of the programs? I work on an IMax . Newest system updates. Thanks in advance
Julie
[email protected]
I showed a screen shot of what happens when I open my photo in PS.
So here are the other screen shots. I select the Preset I've always used.
Which changes my ACR to 2003:
Then I have to click on the I icon thing at the bottom of the grey to convert back to present ACR. (see below)
All of my images are taken with a Canon 6D just a few weeks ago. Does that help?
Similar Messages
-
My AppleTV (2nd gen) crashed last night with the latest update and now all I have a flashing light. What to do? It showed a USB symbol point toward an iTunes symbol and won't reset after resetting with the remote. Same thing.
usb symbol pointing toward an itunes symbol is apples way of trying to get you to connect the appletv to your computer running itunes so it can restore the apple tv's software
though it seems to be a connection few people make -
Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
i have been using firefox on my computer for four years. now you force an update i didnt even want, cuz everything was FINE already, and now if i try to use firefox, it says it cant even be used on my computer. i want to watch my shows, i dont want to spend hours resetting things up or waiting for an email to tell me what im supposed to do. why in hell do you force updates when things are working just f-ing fine, that make everything worse, why cant anything that works ever just be left alone to work.
hello, the last version that was compatible with os x 10.4.11 is firefox 3.6.28 - you can download it from here: [http://www.mozilla.org/en-US/firefox/all-older.html]
[https://support.mozilla.org/en-US/kb/install-firefox-mac?s=installing&r=7&e=es&as=s#os=mac&browser=fx35 Install Firefox on Mac]
afterwards please disable automatic-updates in preferences > advanced > updates so that it doesn't happen again... -
sync'd my 3gs last night. Got ios5 update. Woke up this morning and my contacts were all gone!. Where'd they go? How do I get them back?
I"m on a pc and I don't seem to be able to find them on my pc either. I don't have the little contacts app icon in my itunes area.
-
My daughter and I both have iPhone 4s'. Last night she switched to ios7 and I am still using ios6. I use the find my iPhone app to keep track of her and since the update it no longer works. Her phone says its on but when I try and locate it from either my phone or laptop it shows it offline. Any suggestions. It's my only peace of mind! Thanks!
Does she have her own iCloud account? You can have more than one iCloud account installed on a device, and some users install a secondary iCloud account which is common to others in the family to allow "Find My iPhone" to be used from one account while keeping separate iCloud contacts, mail, etc.
But with iOS 7 although you can still have multiple iCloud accounts installed, only the "primary" iCloud account supports "Find my iPhone". So if her iCloud account is the primary, you can no longer track her from your iCloud account. Is that what happened in your case? -
Lost 2500 photos last night. Mt wife cut and paste a photo into power point for editing. then saved it as a photo. Now in iphoto there is just this one photo and the other 2500 have gone. Where have they gone???????
To answer some basic questions posted to aid people in helping me. These are
I believe it is version 11 of iphoto as i tried to update but it says it has the latest update and Mac is 2 weeks old from new.
OS is Lion.
I have just tried to look everywhere on the Mac to see where the photos might be.
There are no error messages showing on screen and it was fine before my wife did what she did. Even though we have back -ups of 95% of the pictures. I would like to know what happened so that it won't happen again. -
i just got my replacement ipad last night. when i got home and tried the applications, there is no sound. but the videos do have sounds. i already checked the settings. i cannot find what's causing it. please help.
You may have already checked the settings, but it still sounds like you have system sounds muted.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Early today Alt, Ctr and Click and drag changed the brush size. Now it makes the move tool work. Anyone have this problem. I think Adobe had an update and put a bug in the program.
Which version of photoshop and operating system are you using?
windows:
Alt + right click + drag left or right
mac:
Control + Option + left click + drag left or right -
My iphone5 was stolen last night. It is offline and I am trying to track it. Icloud states that it will show a grey circle if it is offline and a green one if it is online. It is offline and it will display nothing except a picture of a phone indicating that it is offline. Not helpful at all. Any suggestions on how to locate the phone or at least the losers who stole it from my pocketbook.
Actually it is very helpful. First it tells you that two possible scenarios happened.
1. iphone ran out of battery.
2. iphone was stolen by someone who knows how to disable connection to service (just by turning it off or otherwise)
Second is more likely if you went to icloud.com fast enough. In that case we pretty soon are going to see another person here asking Apple to unlock "legitimately" purchased phone from eBay or pawn shop. And in that case recovery of your phone is very unlikely. So go report it to police to increase chances of recovery, just in case they turn up in legit pawn shop and move on. Good luck. -
last night I stole my ipad and not how to get the serial number I have the itunes account that I do
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
VUWER 1.5.4
Sneaky ******* 0.2.0
Undercover 4.7
LoJack for Laptops Premium Mac
STEM 2.1 -
Google search and images not working since last night on my macbook air and iPad, how to fix?
Google search and images stopped working last night on my macbook air and the ipad. Any idea why or how to fix?
Restart the router.
Restart the computer.
Restart the iPad.
Best. -
After updating to IOS 5 on an iPhone 4 can no longer get wifi in my home and phone signal is terrible and drops out taking up to 10 mins to re-appear... anyone else having these sort of problems??
I am having similar problems on my new iPhone 4S
My mac gets good wifi connection in the same location. I measured the signal strength -- something like -77db signal vs. -90db noise.
But my iPhone WiFi keeps cutting in and out. In fact, I left my phone on last night to update various apps over WiFi. When I checked it this a.m. I had received several warning messages from AT&T that I was nearing my 3G data limit. I looked at my phone and it had consumed nearly 100mb of cellular data overnight, when it should have been connected over WiFi.
Needless to say, it's taken some of the thrill away from my new iPhone... -
HELP!! My iphone 4 can't load any of the downloaded application such as Facebook and games etc ever since i updated my phone last night through itunes and it indicates that it has an error 1004.
Anyone has any idea how to fix this ?If the error occurred during the update you need to redo the update, as it corrupted something on your phone. Knowledge Base article http://support.apple.com/kb/TS1275 says:
Error 1004 and 1013: This error may be the result of the connection to gs.apple.com being blocked, redirected, or interrupted. Adjust your hosts file or security software to ensure that connections to gs.apple.com are not blocked. If the issue persists, try restoring on another computer with a known-good connection. If this restore is successful, you will need to contact whoever supports your install of the operating system and security software installed on your computer for assistance. If your hosts file redirects requests to gs.apple.com, you may choose to follow Can't connect to the iTunes Store, in the "The 'hosts' file may be blocking the iTunes Store" section.
This usually happens if you have used a hacking program like Tinyumbrella on your computer sometime in the past. -
Rcvd upgrade 3.26 last night, now phone constantly freezes and all contacts lost
rcvd my upgrade to 3.26 last night, now my phone constantly freezes and all my contacts are gone.
Any solution out there? (unfortunately I did not have backup assistant turned on)
tia,
oldbuckoldbuck wrote:
rcvd my upgrade to 3.26 last night, now my phone constantly freezes and all my contacts are gone.
Any solution out there? (unfortunately I did not have backup assistant turned on)
tia,
oldbuck
Thanks for posting oldbuck!
Glad to hear you were able to resolve the freezing issue on your DROID Incredible! I would be happy to see if we can restore your contacts.
I know you mentioned you didn't have an active Backup Assistant account at the time of the update, however, did you have a Google account setup on your device prior to the update? If so, check on www.gmail.com to see if your contacts are backed up in the "Contacts" section. If they are you can just readd the Google account to your device and enable the "Sync Contacts", and all of your contacts will be synced back to your device.
I trust I have answered your question, and have addressed your concerns.
Maybe you are looking for
-
Approve and reject button not appearing in the POrtal screen
Hi All , I have an issue where i create a meeting rwquets and then it goes for approval to the manager , but in this case the manager is not able to see the approve and reject button in the screen , whereas it appears in the back end , please suggest
-
E63 mobile messaging unable to open.
I am using a Nokia e63. At first, my WhatsApp wouldn't open and my phone is really slow anyway. So I synced my contacts, messages, photos and videos to my Nokia Suite, then did a hard reset to my phone; the *#7370#. When it's back on, I try to use me
-
CRS not starting after Oracle 11g Grid was succesuflly installed
Hi: Have 2 node RAC. My Shared storage is on openfiler. Oracle 11g Grid was successfully installed and all the services was working fine. When i restarted the system I found CRS was not coming up. Remaining processes were up and running. Let me expla
-
Error: Upgrade von CS5 Design Premium auf CS6 Design und web Premium
Hi, ich möchte ein Upgrade CS6 Design&Web Premium auf meinen iMac(Macosx 10.6.8) installieren. Habe aktuell noch CS5 Design Premium auf dem Rechner. Starte installation von CD, muss die Seriennumer von CS6 eingeben. Es folgt die Meldung" Die angegeb
-
which is preferrable between move and move-corresponding based on performance issues?