Last Trap: Data Access Error

Hello,
I don't know what the appropropriate forum to ask this would be; please
suggest another one if this is not the best one.
We have a PCI-Express board (that we developed) that we're attempting to
use in a Sparc system. It is an Ultra 25 (also says Ultra SPARC IIIi).
We've attempted to use both Solaris 9 and 10.
With our board in an x8 slot, the system will not boot. If our board
is in an x16 slot, the system boots okay and the system can access
the board properly. Our board is an x1 board.
The following error message is seen during boot attempts:
"ERROR:/pci@e,600000/pci@1/pci@0/usb@1c,1: Last Trap: Data Access Error"
In addition, systems are able to boot and access our boards properly when the
boards are in x4, x8, and x16 slots of x86 systems running Windows and other
operating systems.
Could anyone suggest what might be wrong?
Thanks,
Nathan

Hello Sane,
I'm seeing a wierd problem on a new v890 server...
Record the current OBP settings, then issue set-defaults.
If the problem persists, open a service case.
Michael

Similar Messages

  • Data access error while running  the script in fdm workbench script editor

    Hello Experts,
    I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                              -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
    Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
    Thanks in advance...

    Hi,
    Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
    Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
    Suggest your valuable suggestion's
    Thanks in advance...
    I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

  • 'Data Access Error' while trying to delete period using Table Editor in FDM

    Hi,
    I'm trying to delete a period that has been entered wrongly using Tools->Table Editor option.
    But when I try to 'Update Grid' after deleting the Period,I get 'Data Access Error'.
    Could any one let me know how to solve the error.
    Thanks in advance

    Hi Kelly,
    There is no data that is entered in that period.The data will be entered for that period next month.
    POV is also not set to that period,but still the problem persists.
    Thanks

  • 0187 EAIA Data access error Lenovo Twist

    When the error happend the systemboard was replaced (0187 EAIA Data access error on startup), and the error came back up again.  Replaced the systemboard again and the error persists.  Can't update eprom serial information because of this error.  I currently have about 6 machines doing the same thing, and was wondering if anyone else had experianced this issue?

    I get the same error on a brand new Lenovo Thinkpad S540 (+-1 month old). Besides that first issue I'm also getting these errors:
    2200: Machine Type and Serial Number are invalid
    2201: Machine UUID is invalid
    These occur together and only in about one out of every ten boots.
    Curious what's wrong here.

  • Data access error during workflow- import in FDM

    I am trying to perform import in FDM.But getting 'Data Access Error'.
    Any suggestions on this......

    Hello,
    I have the same problem.
    Can anyone help.
    Here is the log error:
    ** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
    ERROR:
    Code......................................... -2147217900
    Description.................................. ORA-06550: line 2, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 2, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 3, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 3, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 4, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 4, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 5, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 5, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 6, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 6, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 7, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 7, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 8, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 8, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 9, column 13:
    PL/SQL: ORA-00913: too many values
    ORA-06550: line 9, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 10, column 13:
    BEGIN
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 45645656,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 456546564,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 4556465454,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 546,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 654,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 546,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 654,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 564,00);
    INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 564,00);
    END;
    Procedure.................................... clsDataManipulation.fExecuteDML
    Component.................................... upsWDataWindowDM
    Version...................................... 931
    Thread....................................... 268
    IDENTIFICATION:
    User......................................... selhouda
    Computer Name................................ FR900VM0044
    App Name..................................... test
    Client App................................... WebClient
    CONNECTION:
    Provider..................................... ORAOLEDB.ORACLE
    Data Server..................................
    Database Name................................ PARHYPT3.WORLD
    Trusted Connect.............................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location..................................... LOCATION4
    Location ID.................................. 752
    Location Seg................................. 6
    Category..................................... WLCAT
    Category ID.................................. 12
    Period....................................... janv - 2009
    Period ID.................................... 31/01/2009
    POV Local.................................... False
    Language..................................... 1033
    User Level................................... 1
    All Partitions............................... True
    Is Auditor................................... False
    ** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
    ERROR:
    Code......................................... -2147217900
    Description.................................. Data access error.
    Procedure.................................... clsImpDataPump.fProcessSQLInsertValues
    Component.................................... upsWObjectsDM
    Version...................................... 931
    Thread....................................... 268
    IDENTIFICATION:
    User......................................... selhouda
    Computer Name................................ FR900VM0044
    App Name..................................... test
    Client App................................... WebClient
    CONNECTION:
    Provider..................................... ORAOLEDB.ORACLE
    Data Server..................................
    Database Name................................ PARHYPT3.WORLD
    Trusted Connect.............................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location..................................... LOCATION4
    Location ID.................................. 752
    Location Seg................................. 6
    Category..................................... WLCAT
    Category ID.................................. 12
    Period....................................... janv - 2009
    Period ID.................................... 31/01/2009
    POV Local.................................... False
    Language..................................... 1033
    User Level................................... 1
    All Partitions............................... True
    Is Auditor................................... False
    ** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
    ERROR:
    Code......................................... -2147217900
    Description.................................. Data access error.
    Procedure.................................... clsImpDataPump.fImportTextFile
    Component.................................... upsWObjectsDM
    Version...................................... 931
    Thread....................................... 268
    IDENTIFICATION:
    User......................................... selhouda
    Computer Name................................ FR900VM0044
    App Name..................................... test
    Client App................................... WebClient
    CONNECTION:
    Provider..................................... ORAOLEDB.ORACLE
    Data Server..................................
    Database Name................................ PARHYPT3.WORLD
    Trusted Connect.............................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location..................................... LOCATION4
    Location ID.................................. 752
    Location Seg................................. 6
    Category..................................... WLCAT
    Category ID.................................. 12
    Period....................................... janv - 2009
    Period ID.................................... 31/01/2009
    POV Local.................................... False
    Language..................................... 1033
    User Level................................... 1
    All Partitions............................... True
    Is Auditor................................... False
    ** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
    ERROR:
    Code......................................... -2147217900
    Description.................................. Data access error.
    Procedure.................................... clsImpProcessMgr.fLoadAndProcessFile
    Component.................................... upsWObjectsDM
    Version...................................... 931
    Thread....................................... 268
    IDENTIFICATION:
    User......................................... selhouda
    Computer Name................................ FR900VM0044
    App Name..................................... test
    Client App................................... WebClient
    CONNECTION:
    Provider..................................... ORAOLEDB.ORACLE
    Data Server..................................
    Database Name................................ PARHYPT3.WORLD
    Trusted Connect.............................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location..................................... LOCATION4
    Location ID.................................. 752
    Location Seg................................. 6
    Category..................................... WLCAT
    Category ID.................................. 12
    Period....................................... janv - 2009
    Period ID.................................... 31/01/2009
    POV Local.................................... False
    Language..................................... 1033
    User Level................................... 1
    All Partitions............................... True
    Is Auditor................................... False

  • Solaris 8 hangs and data access error on reboot

    Hi
    using solaris 5.8 on UltraSPARC-IIi 360MHz.
    I know it is an old hardware but similiar hardware is running fine. here is the issue,
    System booted : works okay for some time then display was hung so system was rebooted ..it gave data access error. again rebooted and it came up fine..
    I have pasted the /var/adm/messages here..
    http://pastebin.com/m5d2d1d53
    Is it a CPU problem or Hard disk or memory issue ? or something else ?
    what could be solution , a kernel patch is an option ?
    uname -a
    SunOS sparc5 5.8 Generic_108528-07 sun4u sparc SUNW,Ultra-5_10
    test-all at OBP did not show any error.. passed all.
    Thanks

    I cant see the /var/adm/messages output, Since you have already performed a Full Diagnostic check, then you boot your solaris using CD and then perform full FSCK on root File Systems and see any errors get reported. Keep doing fsck 2 -3 times untill all the errors are clean.
    Also you must check the latest patches available for this system architecture.

  • Data Access Error in OIM Scheduler

    I have a scheduler task in OIM,which fetches the "*Manager Employee ID*" custom field from OIM and if that is not empty then updates the Manager ID for that user.
    The scheduler task when run throws an Data Access error, every time it starts and closes.
    The same Scheduler code is working fine in the UAT environment successfully, but throws the error "Data Access Error" in the Prod environment.
    In the code there is a catch block for catching the "*tcDataSetException*" and this is where the error is thrown from.
    When i looked in to the code i found that the "*tcUserOperationsIntf*" was initialized but not closed in the finally block. Will closing the "tcUserOperationsIntf" slove this problem or am i missing something ?
    When is the Data Access Error occur??? There are other schedulers that are running fine in the prod environment.
    Any help in this regard would be really helpful to me.
    Thanks

    I am getting the UDF using the Query.
    I am placing the piece of code that i am using for your reference
    try {
         //Get Users for who have got there manager empid and manager empid not set to null
         String msQuery1 = "select usr_key,usr_login, "+udf_Manager_EMPID+" from usr where "+udf_Manager_EMPID+" is not null " ;
              tcDataSet getMemberUsers = new tcDataSet();
              getMemberUsers.setQuery(getDataBase(), msQuery1);
              getMemberUsers.executeQuery();
              for (int i=0;i<getMemberUsers.getTotalRowCount();i++)
                   getMemberUsers.goToRow(i);
                   String managerEmpId = getMemberUsers.getString(udf_Manager_EMPID);
                   logger.debug("the manager emp id that we get for the user is "+managerEmpId );
                   long userKey = getMemberUsers.getLong("usr_key");
                   String userid = getMemberUsers.getString("usr_login");//Users.User ID
                   logger.debug("the userkey that we get for the user is "+userKey );
                   String msQuery2 = "select usr_key from usr where "+udf_EmployeeID+"="+ managerEmpId ;
                   tcDataSet getMemberUser = new tcDataSet();
                        getMemberUser.setQuery(getDataBase(), msQuery2);
                        getMemberUser.executeQuery();
                        long userassociatedwithmgrid=0;
                        for(int j=0;j<getMemberUser.getTotalRowCount();j++){
                        getMemberUser.goToRow(j);
                             userassociatedwithmgrid = getMemberUser.getLong("usr_key");
                             logger.debug("the user id that we get for the user's manager is "+userassociatedwithmgrid );
                             updateusermanager(userid,userassociatedwithmgrid);
    } catch (tcDataSetException e)
              logger.error(e.getMessage() + " DataSetException");
    In the above code the error is being thrown from the catch block as Data Access Error
    As i told earlier this piece of code works fine in UAT but does not work in prod and throw the above error. The error is thrown from the line msQuery2
    Thanks

  • Data Access Error when importing Standard Reports

    After installation, when I try to import standard reports, I got a "Data Access Error".
    FDM 9.3.1
    Oracle 10g
    In the fdm.err, I find the following description:
    ORA-12899 : too long value for "MYFDMSCHEMA"."TREPORT"."REPORTDESC" (real 152, max 75).
    It seems that reports descriptions are too long for my Oracle repository...
    Any idea ?
    Regards

    Yes.
    Please take the time to flag this response as helpful or correct if it helps you address the issue
    http://forums.oracle.com/forums/ann.jspa?annID=1184
    Edited by: TonyScalese on Dec 2, 2010 11:52 AM

  • Data Access Error

    I am trying to load data into FDM and has "Data Access Error". The error log is following:
    ** Begin FDM Runtime Error Log Entry [2013-05-09 08:57:13] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Incorrect syntax near the keyword 'Right'.
    BULK INSERT Right..tWswang35856364529183 FROM N'\\usd1w436c\fdmdata\Right\Inbox\tWswang35856364529183.tmp' WITH (FORMATFILE = N'\\usd1w436c\fdmdata\Right\Inbox\tWswang35856364529183.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=6185,TABLOCK)
    Procedure........................................ clsDataManipulation.fExecuteDML
    Component........................................ upsWDataWindowDM
    Version.......................................... 1112
    Thread........................................... 36452
    IDENTIFICATION:
    User............................................. swang
    Computer Name.................................... USD1W436C
    App Name......................................... Right
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLOLEDB
    Data Server...................................... gsd1w027t,1404
    Database Name.................................... Right
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... PSLoad
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... FDMActual
    Category ID...................................... 12
    Period........................................... Jan - 2013
    Period ID........................................ 1/31/2013
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2013-05-09 08:57:14] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpDataPump.fImportTextFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 36452
    IDENTIFICATION:
    User............................................. swang
    Computer Name.................................... USD1W436C
    App Name......................................... Right
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLOLEDB
    Data Server...................................... gsd1w027t,1404
    Database Name.................................... Right
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... PSLoad
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... FDMActual
    Category ID...................................... 12
    Period........................................... Jan - 2013
    Period ID........................................ 1/31/2013
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2013-05-09 08:57:14] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 36452
    IDENTIFICATION:
    User............................................. swang
    Computer Name.................................... USD1W436C
    App Name......................................... Right
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLOLEDB
    Data Server...................................... gsd1w027t,1404
    Database Name.................................... Right
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... PSLoad
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... FDMActual
    Category ID...................................... 12
    Period........................................... Jan - 2013
    Period ID........................................ 1/31/2013
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    Your input is appreciated!

    OK, so this is definitely bulk copy related and most likely file/path access as that is the case 9/10 times.
    Off the top of my head, you could check security one of two ways:
    From SQL Box
    - RDP (Remote Desktop) or physically log onto the SQL box using the credentials of the account specified when you setup the app
    - Attempt to open the folder specified in the error log
    - ** If you get an error it should give you an idea as to why it is failing**
    From Machine that is sharing the folder
    - Open Windows Explorer and locate the folder
    - Right click, select properties, then security
    - Confirm that the user specified in the FDM config has directory access
    Other suggestions
    - Put Filemon / procmon on the SQL Box and monitor while you push the file through FDM. At some point filemon/procmon will show an attempt ot access the files specified in the bulk insert. This will give you a very good idea as to what is happening.
    - Check the Eventlog on the box with the file share. Go to the Security section of logs. You should see a failed security attempt from the SQL box / username.

  • Data Access Error HFM to FDM

    Hi
    When I attempt to drill back from HFM to FDM the following error is generated. "Data Access Error"
    An extract of the error log is below:
    ERROR:
    Code......................................... -2147217900
    Description.................................. Data access error.
    Procedure.................................... clsSQLMgr.fLocationsByIntersection
    Component.................................... upsWObjectsDM
    Version...................................... 931
    Thread....................................... 7484
    Can anyone help me to resolve this?
    SSO is turned on and I have entered the required settings into the FDM Load Balance Server Config and the HFM Web Server Config. A link to FDM has been set up from my HFM application and FDM launches with SSO working correctly.
    Any advice would be greatly appreciated.
    Kind Regards
    DeeDee

    Hi DeeDee
    Didya find solution to this as am facing a similar problem .

  • Data Access Error importing Large Files, which previously worked

    Hi All,
    I am trying to import files directly from the server (from inbox), these files worked earlier so I know there is nothing wrong with them. If I take 600 rows out of the file, and upload them, it imports fine, however if I attempt to import the entire file, which is 16 meg, I get the error "Data Access Error". Why could this be?
    1. It had been working for days prior, but cant anymore.
    2. A sample of the file works - pulling from the same file path.
    3. I try other files (other months) that are comparable in size, 15 meg+, and none of them work. So it is indeed a file size issue.
    what can I do to resolve it?
    Thanks
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 4940
    Edited by: tyson33 on Dec 29, 2009 9:22 AM

    Hello,
    A "Data Access Error" means that something happened at the database level; not at the FDM level. I would suggest you clear your error log, reproduce the error log and then look at the very first entry.
    Also, I would suggest you possibly open an SR for further review.
    Thank you,

  • Err.Description="Data access error."

    This question pertains to FDM 9.3.1, ImportAction script, StartProcess event.
    After successfully CREATEing a table and BULK INSERTING a file sans a few erroneous records using "DW.DataManipulation.fExecuteDML strSQL, True, True" or "DW.DataManipulation.fExecuteDML strSQL, False, True", I get
    Err.Number=2147217900 and Err.Description="Data access error."
    However, after explicitly defining a connection to the FDM database server and executing the same SQL against the same data, I get an error description that is much more useful for my users, Error.Number=-2147217900 and Err.Description="Bulk load data conversion error (truncation) for row x, column y (fieldname)."
    I'd rather not establish a second connection to the FDM database server if I can avoid it. Any ideas as to why each method produces a different error message? How do I get fExecuteDML to return the useful description?
    ' Connect to the FDM database server
    Set adoConn = CreateObject("ADODB.Connection")
    adoConn.ConnectionString = API.DataWindow.Connection.PstrConnection
    adoConn.CursorLocation = 3' adUseClient
    adoConn.Open
    ' Create the ADODB Command object
    Set adoComm = CreateObject("ADODB.Command")
    adoComm.ActiveConnection = adoConn
    adoComm.CommandType = 1' adCmdTable
    On Error Resume Next
    adoComm.CommandText = strSQL
    adoComm.Execute

    Larry - apologies for the incomplete response. I misunderstood your question to be "how do I change the error message that FDM displays" I assumed you were trying to modify the information bar display.
    Glad you found something that helps you.

  • Data Access Error when Importing a Multi-Load Text File

    I am able to upload a file that contains 12 months of data with the following tags (and one line of data as example):
    EnterpriseToHFM07-09
    Actual
    01/31/2007
    12
    R,N,P
    C,A,V,V,V,V,V,V,V,V,V,V,V,V
    FR.PADJ_LC,BRREV,372803807,355714043,405412167,414395204,453025792,449832777,524375729,419567061,411230079,469840787,432445947,384835661
    After uploading, click on Import and receive a Data Access Error. Log is below. Any input is greatly appreciated.
    ** Begin FDM Runtime Error Log Entry [2010-12-02 10:13:02] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Cannot bulk load because the file "\\gsd4w023c\FDMAPPS\FDMT\Inbox\tWmpus54349283242113.tmp" could not be opened. Operating system error code 5(Access is denied.).
    BULK INSERT FDMDev1..tWmpus54349283242113 FROM N'\\gsd4w023c\FDMAPPS\FDMT\Inbox\tWmpus54349283242113.tmp' WITH (FORMATFILE = N'\\gsd4w023c\FDMAPPS\FDMT\Inbox\tWmpus54349283242113.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=2221,TABLOCK)
    Procedure........................................ clsDataManipulation.fExecuteDML
    Component........................................ upsWDataWindowDM
    Version.......................................... 1112
    Thread........................................... 8324
    IDENTIFICATION:
    User............................................. 12345
    Computer Name.................................... GSD980
    App Name......................................... FDMT
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLNCLI10
    Data Server...................................... FDMDS
    Database Name.................................... FDMDev1
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... EnterpriseToHFM07-09
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... Actual
    Category ID...................................... 12
    Period........................................... Jan - 2007
    Period ID........................................ 1/31/2007
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2010-12-02 10:13:02] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error. File=fr_HypEnt_data_2007.DAT
    Procedure........................................ clsMPLoader.fMultiImportText
    Component........................................ upsWMPLoaderDM
    Version.......................................... 1112
    Thread........................................... 8324
    IDENTIFICATION:
    User............................................. mpus54964
    Computer Name.................................... GSD400U
    App Name......................................... FDMT
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLNCLI10
    Data Server...................................... FDMDS
    Database Name.................................... FDMDev1
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... EnterpriseToHFM07-09
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... Actual
    Category ID...................................... 12
    Period........................................... Jan - 2007
    Period ID........................................ 1/31/2007
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False

    Yes.
    Please take the time to flag this response as helpful or correct if it helps you address the issue
    http://forums.oracle.com/forums/ann.jspa?annID=1184
    Edited by: TonyScalese on Dec 2, 2010 11:52 AM

  • Data Acces Error

    Hi Guys,
    I am experiencing a data access error when trying to import a .csv source file. I found almost similar issues in previous threads, however not containing a solution for mine.
    I am using a 10g DB, I unchecked the box in the On/Off switch for work table bitmap index. This option should be ON for Oracle 9i and OFF Oracle 10g.
    Also, I tried with and without scripts in the import formats. Also not the cause. Last, I tried to import a source file from my own computer, also not the issue.
    I am running out of options. Please check out my error log:
    ** Begin FDM Runtime Error Log Entry [2010-12-14-13:00:59] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 4656
    IDENTIFICATION:
    User............................................. xxxx
    Computer Name.................................... DCEPHFMTSTDB1
    App Name......................................... FDMTEST
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AEP812
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... WLACT2010
    Category ID...................................... 12
    Period........................................... janv - 2010
    Period ID........................................ 31/01/2010
    POV Local........................................ True
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    Edited by: JDeM on 14-dec-2010 4:19

    ** Begin FDM Runtime Error Log Entry [2010-12-14-14:10:48] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... ORA-06550: line 2, column 593:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 2, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 3, column 593:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 3, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 4, column 593:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 4, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 5, column 593:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 5, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 6, column 594:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 6, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 7, column 591:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 7, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 8, column 590:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 8, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 9, column 591:
    PL/SQL: ORA-00936: missing expression
    ORA-06550: line 9, column 1:
    PL/SQL: SQL Statement ignored
    BEGIN
    INSERT INTO tWjeroen384856882416 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (749, 12, N'20100131', N'YTD', N'14110000', N'EPFI', N'[ICP NONE]', N'CLO', N'[NONE]', N'[NONE]',
    (etc......)
    (etc......)
    Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (749, 12, N'20100131', N'YTD', N'21451000', N'EPFI', N'880', N'CLO', N'[NONE]', N'[NONE]', N'[NONE]', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, -,00461);
    END;
    Procedure........................................ clsDataManipulation.fExecuteDML
    Component........................................ upsWDataWindowDM
    Version.......................................... 1111
    Thread........................................... 5688
    IDENTIFICATION:
    User............................................. jeroen.demoor
    Computer Name.................................... DCEPHFMTSTDB1
    App Name......................................... FDMTEST
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AEP812
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... WLACT2010
    Category ID...................................... 12
    Period........................................... janv - 2010
    Period ID........................................ 31/01/2010
    POV Local........................................ True
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2010-12-14-14:10:48] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpDataPump.fProcessSQLInsertValues
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 5688
    IDENTIFICATION:
    User............................................. jeroen.demoor
    Computer Name.................................... DCEPHFMTSTDB1
    App Name......................................... FDMTEST
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AEP812
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... WLACT2010
    Category ID...................................... 12
    Period........................................... janv - 2010
    Period ID........................................ 31/01/2010
    POV Local........................................ True
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2010-12-14-14:10:48] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpDataPump.fImportTextFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 5688
    IDENTIFICATION:
    User............................................. jeroen.demoor
    Computer Name.................................... DCEPHFMTSTDB1
    App Name......................................... FDMTEST
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AEP812
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... WLACT2010
    Category ID...................................... 12
    Period........................................... janv - 2010
    Period ID........................................ 31/01/2010
    POV Local........................................ True
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2010-12-14-14:10:49] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 5688
    IDENTIFICATION:
    User............................................. jeroen.demoor
    Computer Name.................................... DCEPHFMTSTDB1
    App Name......................................... FDMTEST
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AEP812
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... WLACT2010
    Category ID...................................... 12
    Period........................................... janv - 2010
    Period ID........................................ 31/01/2010
    POV Local........................................ True
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False

  • FDM. Data acces error

    Hello,
    Would need someone to help me with error that I get to import a file through FDM. Below I am attaching the error log.
    ** Begin FDM Runtime Error Log Entry [2011-03-22-10:13:56] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Cannot bulk load because the file "\\ringbearer.sco.grupocatalanaoccidente.com\APP\FDMGCO\Inbox\tWadmin550827407062.tmp" could not be opened. Operating system error code 5(Access is denied.).
    BULK INSERT CONSOGCO..tWadmin550827407062 FROM N'\\ringbearer.sco.grupocatalanaoccidente.com\APP\FDMGCO\Inbox\tWadmin550827407062.tmp' WITH (FORMATFILE = N'\\ringbearer.sco.grupocatalanaoccidente.com\APP\FDMGCO\Inbox\tWadmin550827407062.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=4,TABLOCK)
    Procedure........................................ clsDataManipulation.fExecuteDML
    Component........................................ upsWDataWindowDM
    Version.......................................... 1111
    Thread........................................... 2740
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... RINGBEARER
    App Name......................................... FDMGCO
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLOLEDB
    Data Server...................................... ringare.sco.grupocatalanaoccidente.com
    Database Name.................................... CONSOGCO
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AT00
    Location ID...................................... 759
    Location Seg..................................... 11
    Category......................................... REAL
    Category ID...................................... 12
    Period........................................... dic - 2010
    Period ID........................................ 12/31/2010
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2011-03-22-10:13:56] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpDataPump.fImportTextFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 2740
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... RINGBEARER
    App Name......................................... FDMGCO
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLOLEDB
    Data Server...................................... ringare.sco.grupocatalanaoccidente.com
    Database Name.................................... CONSOGCO
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AT00
    Location ID...................................... 759
    Location Seg..................................... 11
    Category......................................... REAL
    Category ID...................................... 12
    Period........................................... dic - 2010
    Period ID........................................ 12/31/2010
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2011-03-22-10:13:56] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 2740
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... RINGBEARER
    App Name......................................... FDMGCO
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... SQLOLEDB
    Data Server...................................... ringare.sco.grupocatalanaoccidente.com
    Database Name.................................... CONSOGCO
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... AT00
    Location ID...................................... 759
    Location Seg..................................... 11
    Category......................................... REAL
    Category ID...................................... 12
    Period........................................... dic - 2010
    Period ID........................................ 12/31/2010
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    Thanks and regards.

    The windows account that is running the MSSQL Service on the SQL Server does not have read permission to the FDM application folder share. In order to perform the bulk insert process, the account must be able to read from the inbox directory to read the .tmp file generated during the import process. The error code 5 shows that it is unable to read the .tmp file in the inbox directory to complete the process.

Maybe you are looking for