Latest EyeTV doesn't work with remote after installing latest candelair, 1.20 no option in preferences to activate snow leopard?

After upgrading to Snow Leopard my mac remote no longer works with EyeTV. Have checked EyeTV is the latest version, have also installed the latest Candelair which other users have advised needs to have snow leopard activated in the preferences but on my version there is no mention of this in the preferences pane.
Just lists...
Driver version 1.20 installed
The remote control infrared receiver is enabled
This computer only works with the remote with ID 27 (after I paired it)
Issues with your remote?
Can anyone advise?
Thanks

So, I figured it out myself. Way back in time I had set up some ipfw rules that I had completely forgotten about, which included this:
01000 allow ip from 192.168.0.0/16 to me dst-port 5900 in
Since I switched to the AEBS, of course the IP range changed to 10.0.1.x, so ipfw was blocking it. Problem solved.
Now I just need to figure out why my AEBS keeps crashing..

Similar Messages

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot

Hello everybody,
Arch doesn't load kernel module arc4 during boot with usb wireless adapter Z-Com XG-703A. So WPA doesn't work and It can connect to only opened access points.
I found two work arounds but I don't know how to fix the issue completely.
1. Remove usb adapter and plug it in again (it causes arc4 module to load), then restart networking.
2. rmmod p54usb, rmmod p54common, modprobe arc4, modprobe p54usb and after that restart networking.
Could anybody help to fix the problem generally?
$ lsusb
0cde:0008 Z-Com XG-703A 802.11g Wireless Adapter [Intersil ISL3887]
$ uname -a
Linux arch 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 08:11:41 UTC 2012 i686 Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz GenuineIntel GNU/Linux
Stas

Does the p54common get loaded again as well when you do modprobep54usb?
If not, you might just put that into modprobe.conf blacklist.
If it does get loaded as well, there might be another wireless module getting loaded that perhaps does cause problems. You can check that with
mkinitcpio -v
now, or with lsmod after a reboot before your workaround.

Latest wine doesn't work with ie4linux

downgrading to wine-0.9.36-1.pkg.tar.gz solved the problem

You could try to build wine-0.9.38 with makepkg from /var/abs/extra/x11/wine. The last package is faulty in the extra repository. It was built without font support and possibly other dependencies as well. But the PKGBUILD should have all dependencies.
You can read the other wine posts in forum. If it doesn't work for you, you can alwas revert to 0.9.36. And you can always add a comment to the bug for wine in the bugs page to put some press on the developer to try to fix his build.
Linfan

HT204380 My apple ID doesn't work with FaceTime after IOS 6 update

Once I updated my IPAD to IOS 6 , my apple ID stopped working with FaceTime and iMessage
Every time I enter the password, it says that apple Id is not matching
I am sure that it is the right one, I checked it in iCloud and iTunes, it is working well.

Something as simple as your method of payment having expired could be causing your problems. Use the link below to check all info, especially your payment info, for your Apple ID.
https://appleid.apple.com

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

IPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

iPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

Firefox command line option "-no-remote" doesn't work with profile.

I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening?

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!!

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?

Hello I found my answer on Settings>>Restritions! :)
Thanks to me:)

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help?

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help

go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

HT3325 Keynote Remote doesn't work with hyperlinks?

Remote sync well with iPad .. Impressive
However, it doesn't work with any hyperlinks!
It's simply an image and swiping the pages ... Ignoring all hyperlinks ... It does work with media but u would have to put them in sequence in your slides. If you work with many hyperlinks within a slide, you can't get any to work with the remote!
Quite disappointed that Apple actually charges for an app so simple with no value added services!
There are many free apps doing the same simple tasks.
Thumbs DOWN.
Do something about it Apple!

Any remote that actually works?

My remote Control doesn't work with my new imac

I have a brand new iMac 27" with mountain lion, and Doesn't work with my aluminium remote control, I already follow the steps on Help, but there's no IR option on the advanced button of security and privacy. Of course I already check with my iphone dock and the batteries are OK, So I think it's a bug from the OS.
Any thougths?

Thanks mende1.
Apple that, *****!!

Latest Quicktime update doesn't work with older versions of Safari.

I have an iMac with Panther 10.3.9. I've downloaded and installed all the updates regularly. That last update of Quicktime doesn't work with Safari! All I get is the big Q. Any ideas?

Hi
Welcome to Apple Discussions
Check your Quicktime settings in System Preferences>Quicktime>Advanced panel.
Mime settings>make sure nothing is checked in the Miscellaneous box.
Advance panel>Enable Flash ought to be selected.

Synchronisation of photos from Aperture doesn't work with iPad4 and Apple TV

IPad4 with IOS 7.1.1
ITunes 11.1.5
Doesn't work with Aperture!
I couldn't synchronise my albums after upgrading Aperture to the latest software version, both for Apple TV and iPad2/iPad4.
Recovery of Aperture Mediathek doesn't help.

Could there be a relationship with the fact tha wifi syncing with itunes doesn't work too?
Also: I installed vlc remote last week which also gave connection problems. After manual input of ip adress and port it worked fine. Still I don't understand why. I have just a regular home network. Moreover apple remote combined with itunes just doesn't work still.
Any hints?

Latest EyeTV doesn't work with remote after installing latest candelair, 1.20 no option in preferences to activate snow leopard?

Similar Messages

Maybe you are looking for