Latest releases of Designer 10g and 10gR2 now available on OTN
The latest maintenance releases of Designer 10g (9.0.4.7) and Designer 10gR2 (10.1.2.2) have been available for download on Metalink for some time now. These releases were recently made available for download from OTN. In addition, the latest release notes, installation guide, bug fixes for Designer and SCM, and error messages are now also available online. Links to the downloads and these documents are available from the Designer home page on OTN: http://otn.oracle.com/products/designer/index.html
Suresh Ramaswamy
Designer Development
Yes, that is correct. However, SCM is no longer being released as a standalone product. You should use Oracle Designer (which includes the Repository and all SCM functionality) instead.
- Suresh
Similar Messages
-
Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, ClaudioHi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio -
Latest Apps 11i Techstack (ATG RUP 7) Now Available
Hi alla,
Latest Apps 11i Techstack (ATG RUP 7) Now Available now avaliable, You can fine more details on
http://blogs.oracle.com/stevenChan/2009/07/apps_11i_techstack_atg_rup_7.html
The official name for this patch is:
Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP7) (Patch 6241631)
In other words, this is the seventh consolidated rollup of patches released on top of 11i.ATG_PF.H. For the Oracryptoanalysts out there who like to track nomenclature variants of these things, this patch is also referred to as the Applications Technology Group (ATG) Family Pack H Rollup 7.
This Rollup patch is a collection of technology-stack patches that can safely be applied on top of the ATG Family Pack H. This Rollup patch is cumulative: all previous patches released for Family Pack H since the initial 11.5.10 release are included in this latest patch, including:Hi,
We are planning to apply this to our instance too. Could you please guide us to the right direction.Do you follow the steps in (Note: 783600.1 - About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7))? I believe this document should be enough.
Initially we are facing 'Perl environment not set for Oracle Applications. (TXK libraries not in INCLUDE list)Please post the complete error message and at what stage/step you receive this error.
Ensure that Autoconfig has been run and your environment has been sourced correctly.'Make sure AutoConfig complete successfully on the application tier node before applying this patch, and you are logged in as applmgr user and have sourced the env file.
we have tried to adding $APPLRGF(whole patch) to PRL5LIB path. We are getting the above error during the pre-requisites Why to add $APPLRGF? Is there something about this environment variable mentioned in the patch document? Source the env file should be enough.
Regards,
Hussein -
The latest maintenance release of Designer 10gR2 (10.1.2.4) is available for download from OTN. In addition, the latest release notes, installation guide, bug fixes and error messages for Designer 10gR2 (10.1.2.4) are now also available online. Links to the downloads and these documents are available from the Designer home page on OTN: http://otn.oracle.com/products/designer/index.html
Manish
Designer DevelopmentYes, that is correct. However, SCM is no longer being released as a standalone product. You should use Oracle Designer (which includes the Repository and all SCM functionality) instead.
- Suresh -
Slow performance Designer 10g (on 10gR2 database)
We are busy testing Designer 10g version 10.1.2.5 (windows XP) on 10gR2 64 bit database (Sun solaris) . The repository was migrated from Designer 6.0.
But the performance/response is rather slow. Example: At first, opening a server model diagram took 2 minutes or more. By searching the forum we found the tip for the "alter system set OPTIMIZER_SECURE_VIEW_MERGING = false;". That made a big difference.
But now we still have response problems: Expanding the treeview for the list of tables, views or snapshots takes much longer then in Designer 6.0.
Also opening for example Design Editor takes longer then one normally expects, allthough some delay can be expected because we have a lot of applications (100) in the repository.
Is it because it is now written in Java, or are more database optimizations possible?
Paul.Have you computed statistics using the Repository Administration Utility (RAU)? The default percentage of 20% is usually good enough, but you could go higher.
Do a View Objects in RAU and check for missing, disabled or invalid objects. If you find any, there are ways to correct the situation, mostly under the Recreate button.
Make sure that no-one else is using the repository, then press the Recreate button in RAU and use the selection labeled: Truncate Temporary Tables. Sometimes these tables get too full and can impact performance.
Under the Options menu in RAU, there is an item labeled: Enable Performance Enhancements. To be honest with you, I've never noticed this item before, and I don't know for sure what it does. Then again, I've never had any serious performance problems in Designer. It might be worth your while to back up your repository, then turn this on. -
Different releases of oracle 10g and 9i
Hi,
what is the difference between oracle 10g release 1 (10.1 ) and 10g release 2 (10.2)? : difference in instalaion steps only ,will be fine
i need to install silently both the releases in AIX 6.1....
Also please tell me the same for different releases of oracle 9i.Your answers are just a few clicks beyond the URL below.
http://tahiti.oracle.com
Installation Guide is available for each release down 1 click from URL above
Enjoy! -
[ANN] Oracle JDeveloper 10g production is now available for download.
It's probably worth a mention in this forum too ;-)
In case you haven't notice we have just released Oracle JDeveloper 10g production with a many new features that makes it the ideal Java tools for Oracle Application Server users.
Check it out at:
http://otn.oracle.com/products/jdev
A partial list of new features:
Visual layout editing for both JSP/HTML and Swing user interfaces.
Drag-and-Drop data-binding of business services to the user interface
Visual Struts-based page flow modeler
Declarative creation of business services based on EJB, TopLink, JavaBeans, Web Services, or Oracle ADF Business Components
Visual UML modeling with code generation
Code Auditing and Metrics
Hot-Swap Debugging
Improved code editor
XML Schema visual editor
Database development and Database modeling
One-Click deploy to Oracle Application Server, BEA Weblogic, JBoss and Tomcat
Web services development and consumption with support for WS-I
And much more.Hi,
That is definitely a product manager - positioning question (forum ID: oalonso), so I'd recommend that you ask the same question in the SES forum. The Text team has been monitoring that forum and answering most of the posts there, so you'd probably be more likely to get your question answered.
Secure Enterprise Search
-Ron -
Technology Preview update with new SOA design- and runtime now available
Get the updated version of the Technology Preview now! Rules is the big addition with this update but it's also more stable and you can try CEP as well.
For best results, get the new version of the installation guide.
Use your existing TP3 JDeveloper and update with the SOA plug-in:
http://www.oracle.com/technology/products/ias/bpel/techpreview/index.html
Heidi.Unable to download pcbpel_bundle.zip (SOA design and runtime) from following link
http://download.oracle.com/otndocs/products/soa/pcbpel_bundle.zip
Above link is there in page "Oracle SOA Suite 11 g - Technology Preview "
http://www.oracle.com/technology/products/ias/bpel/techpreview/index.html
under "update" hyperlink -
Latest update failed to install and cannot now open iTunes at all.
I tried to install the latest update of iTunes on my laptop but it failed. I got both a 'runtime error' message and also an error message saying 'Apple Mobile Device' failed to start.
I have tried uninstalling and resinstalling an earlier version but nothing is working so I am unable to back up my files and transer things between my iphone and my kids' ipod Touches.
I would really appreciate any ideas of what I can do as I need to get iTunes back on my laptop.
Thank youHey gina 2909,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
OWB 10g Release 2 now available on OTN
http://www.oracle.com/technology/products/warehouse/index.html
Ok, thanks, that seems to be the right link .. though is restricted to User' Guide and Transformation Guide ..
It would be good if somebody could do a quick review. and post it here.
OWB makes good consultancy case,a nd provides different levels with various options for customising solutions.
- Jojo -
SDSoC development environment for Zynq SoCs and MPSoCs now available
Xilinx has announced the public access release of the SDSoC development environment for Zynq SoCs and MPSoCs. The SDSoC development environment provides a familiar embedded C/C++ application development experience including an easy to use Eclipse IDE and a comprehensive design environment for heterogeneous processing designs based on the Zynq SoC and MPSoC device families.
Sorry about the delay in responding. There isn't a document that spells out the bug fixes right now.
Briefly, the main fixes in 2.0.1 are around:
-Errors related to workspaces having spaces in the path
-Can't stop a server when there's a space in the domain path
-Difficult to create a server against a domain other than the default
-EPL syntax highlighting didn't work in some valid config files.
And a handful of smaller UI oriented fixes. -
AE CS5 and SDK now available!
Hi all,
Just wanted to give you a heads up that After Effects CS5 is now publicly available for download, both the 30-day trial, and the retail download:
http://www.adobe.com/go/tryaftereffects
We've also publicly posted the initial release of the AE CS5 SDK:
http://www.adobe.com/devnet/aftereffects/
Enjoy, and happy coding!Hi,
I have just downloaded the Windows copy. It looks like it now allows remote administration, which is cool. However, I found out that it does not install itself as a Windows service! Is it possible to install it as a Windows Service?
BTW, I think 'Sun ONE AppServer 8' sounds better that 'Java System Application Server 8' :P
Sincerely,
Sergei Batiuk. -
AsyncOS 6.4.0 for Email and Management now available
We've had some discussion of 6.4 in other threads, and some of you may have received email notification, but I had neglected to post an announcement on IronPort Nation.
On October 6, 2008, we announced the general availability release of AsyncOS version 6.4.0-273 for all Email Security Appliances (C-Series and X-Series) and Security Management Appliances (M-Series).
Official Announcement on Support Portal
6.4.0 Email Security Release Notes
6.4.0 Security Management Release Notes
Karl Young
Email Security Product Support Engineer
IronPort Systemsthis is a bit old now, can it be un-stickied?
As you wish! :) -
Which one is the latest version of Visual Composer and where is available?
Hi guys!
Can you answer me the question? Send pls also information, where it is available to download..
Thanx!
PeterHi Peter,
Latest version of Visual Composer (Version 7.0, based on NetWeaver release NW04S) can be obtained from the SAP Service Marketplace (you will need a SAP customer ID for this).
1. Visit service.sap.com
2. Goto software download (ie.,--> https://websmp109.sap-ag.de/swdc)
3. Download SAP NW04 SR1 VISUAL COMPOSER 6.0
The only other way of getting a trial version is to download the NW04S "Sneak Preview" edition from the SDN Downloads area and install it.Follow this <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/77317c8d-0701-0010-f093-ed35a427f559">link</a>
Also check out this <a href="https://www.sdn.sap.com/irj/sdn/profile?userID=162382">thread</a> which gives steps to download VC and the documentation links and installation guides for the same.
Regards,
Abhishek Mehra.
(Reward points if useful !!) -
Cross Post.
See details at: GeoRaptor Release 2.1.1 (Build 3) Available for SQL Developer
regards
Simon GreenerHi,
The original GeoRaptor had some documentation but it has not been updated.
It is a task on the development list but it has a low priority next to the developments we have planned for the next release. (The main ones being the ability to map the whole, or part, of a SELECT statement executed in a SQL Worksheet - including export to shapefile; the addition of multiple SRID-aware Views to enhance the current single, SRID-unaware view; length/area tools; line and polygon selection tools.)
The attribute and geometry tabs in the pane in the lower half of the spatial view will appear when an "identify" operation is executed and selected data exists.
The split into attribute and geometry tabs was done to better control the visualisation experience of a user. The original Geometry tab displayed a single geometry in a non-standard way and allowed a user to drag select ordinates which could then be mapped. The button should have been removed in build 3 but it wasn't. It will probably do nothing. Perhaps in the next release we might replace the button with an ability to select and individual geometry, highlight it and show its points or even show elements in a multi-element geometry eg show me inner ring 2 in the first outer-ring of a multi-polygon. Don't know. If anyone wants this type of functionality register an enhancement request on the sourceforge GeoRaptor website.
Remember, GeoRaptor is an open source, community driven tool. If you want to help by writing documentation eg a simple one page wiki page on how to validate geometry etc (it doesn't have to be a whole manual), or contribute code, let us know. Or if you simply like the tool or want an enhancement, let us know.
It is hard writing a tool in the vacuum of one's own experience (no matter how considerable that might be) in a land far, far away (I live in Hobart, Tasmania, Australia), to let us know how we are going......
regards
Simon
Maybe you are looking for
-
Is there any way of getting iChat without creating a new account?
I have recently bought a macbook pro and are having difficulties with setting up an iChat account. When I go add an account it gives me options of AIM, me.com, mac.com, google or yahoo however i do not have any of those accounts. Is there a way of se
-
IPhoto with PhotoShop Elements
Got a new glitch! Started today....when I drag a photo to desktop from iPhoto it's a photo. When I tweak it in photoshop elements and save it for web it is a jpeg icon. Didn't do that until today. If I upload it to an image host it is a regular photo
-
AEDTM in PCL4 for IT0302 - Additional Actions
Hi All, I am using the FM 'HR_INFOTYPE_LOG_GET_LIST' to read the log details. How does the AEDTM in PCL4 get updated?. I checked for IT0302, the AEDTM present in IT0302 and in PCL4 for IT0302 are different. They do not match, What may be the reason??
-
How can you get the text and the box to resize responsibly in Adobe Edge?
Help please. Thank you
-
Safari interfering with Comcast email functions?
I have Comcast internet email and recently I noticed that the function of choosing font color won't work anymore. When I choose a color and start to type, no print shows up and when I fiddle with it it just reverts back to black. At first thought it