Latest update 3.3 only for lion users? total mess

apple did a major step to indicate that aperture is no app for "pro"users. If it should be that it should support not only the latest system version!
latest update 3.3 only for lion users? total mess.
I will look for another solution. Sad.

Hi,
I was wondering if somebody could give me some guidance please?
I bought an N73 in September after much research and a lot of deliberating, I decided to purchase one (via O2 in England) even though i had heard lots of unhappy people claiming the phone had ruined their life etc due to its software faults.
I haven't updated my phone yet since buying it mainly due to being put off by the number of NEW problems the updates can cause.
I dont have any major problems with my phone, its got a bit slower with time and the camera isnt very quick when uploading and sometimes switches off (but i think its to do with the slide mechanism on the back), anyway i would be grateful if you would give me your honest opinion as to whether i should upgrade to the latest firmware or not!
Many Thanks
Richie

Similar Messages

I want to install an app but only for one user on my imac with Lion

I have 2 users on my mac. I would like to install some apps (iwork) but only for one user and not the other user. How can I do this?

Setup of iWork in your wife's account should only occur the once.
Updates can be performed through your account and are usually performed via Software Update.
Messages should not be popping up in your wife's account if all the iWork updates have been performed.
Go to Software Update and download and install all the iWork updates.
Unless you keep OSX up-to-date, messages will continue to come up when your wife logs into her account.

Make UDF Read-only for all users

Hi
Can i use any script to make a UDF read-only for all users?
i am looking at CPRF and CUFD Tables
thanks

Hi,
You should never try updating system table directly. That will against supporting policy by SAP.
Thanks,
Gordon

Need to give REVOKE CLOSE option in CO02 only for selective users

Hello,
Need to Restrict Revoke Close Option in Tcode CO02 (Under Functions - Restrict Processing - Revoke Close) through Role/Object Level. Can any one suggest how to control this . Need to give access for CO02 for 5 Users , but only 2 Users can able to do Revoke Close Option , other 3 Users should not able to do this activity.
BR,
Murali

There is no authorization object as B_USERSTAT_T , but there is a authorization object as B_USERSTAT . I tried to create a Temporary Role and manually assigned this Object . In this object there is no way to control REVOKE Close option .
But there is one way noted in Google to restrict Revoke Close option .
1.Goto BS22
2.Select the system status TEC0 (I0045) & just duble click it,
3.Maintain the Revoke technical completion (BUTA) =Forbidd (not allowed),
But if i set the above Parameter , this will restrict Revoke Option for all the users . I need to control ONLY for selective users . I can set some value in user data for those users , based on that i can write some coding to restrict , but i want to know where to write this code .... I tried in some area , but it never works.
Can any one give some idea to fix this issue.
BR,
Murali

ADF and MSSQL 2005 problems - FOR UPDATE clause allowed only for DECLARE C

Hi all.
I have a legacy application which uses MS SQL server 2000 / 2005. I've started to build up a new version of this application using JDev + ADF stack.
Everything went ok until I've tried to update some data in a Form. I'm getting this error:
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR
Can someone figure out what's wrong?
1) In a MSSQL server connection string, normally we define the 'SelectMethod' parameter to 'cursor', as follows: jdbc:sqlserver://$host$:$port$;databaseName=dbserver;SelectMethod=cursor
Since I was not able to do this through my project's 'Application Resources > Connections' screen, I could not evaluate if this is the cause
2) I'm trying to follow the steps of an Oracle tutorial (http://www.oracle.com/technology/obe/obe11jdev/ps1/ria_application/developriaapplication_long.htm#ad), of course using MS SQL server instead of Oracle, and using some master->detail tables like the example suggests (in the tutorial, I've reached the step 11, then tried to update a record, which causes the mentioned exception)
Follows the stacktrace:
<Utils><buildFacesMessage> ADF: Adding the following JSF error message: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR.
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR.
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.getMoreResults(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.seekToOutParams(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.getPrepStmtHandle(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doPrepExec(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelectForAltKey(BaseSQLBuilderImpl.java:707)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:546)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:7789)
Regards,
Luciano S. Lorencini, SCJP, SCWCD

So, I`ve created a test project and use the MSSQL flavor to create my Business Components.
After repeated all the steps, the error did not happen again.
But some strange behavior happen: I change some data and click the "Submit" button. The changed data appears ok in screen, but the changes were not committed in database!
Do I need to explicitly tell ADF to commit that changes somewhere?
Greetings,
Luciano S. Lorencini, SCJP, SCWCD

Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

Never mind, I finally got it working, thanks!

When I try to play a dvd Macbook Pro I get a box with the message,This function is only for activated users. To activate go to Preferences and Donate" That took me to Mr. Gecko"s Facebook page wanting me to donate $1.99! Does any one know what this is? H

When I try to play a dvd on my Macbook Pro I get a box with the message " This is only for activated users. To activate go to preferences,donate" this takes me to Mr. Gecko's facebook page asking me to donate $1.99-$4.99.
Any clues on what this is, and/or how to bypass it? If I can report this to someone? Thanks

Sure sounds like malware, unles you installed something from a questionable site, then it's still malware but in a payware form as playing DVDs is free on Mac's.
Unless the DVD has software on it perhaps?
Does this work on any movie DVD or is this a special kind of DVD with software on it from someplace?

Edit password rules only for BCC user

Hi all,
our customer has requested some changes on the password rules only for BCC users.
So, i should change the follow component:
/atg/userprofiling/passwordchecker/PasswordMinLengthRule
/atg/userprofiling/passwordchecker/PasswordMixedCaseRule
/atg/userprofiling/passwordchecker/PasswordMustIncludeNumberRule
/atg/userprofiling/passwordchecker/PasswordMustIncludeSymbolRule
/atg/userprofiling/passwordchecker/InternalPasswordMustNotIncludeLogin
/atg/userprofiling/passwordchecker/InternalPasswordNotInPreviousNRule
But the component password rules above, should be changed only for the BCC users. How can i do this?
Edited by: user7618461 on 30-set-2011 3.45

Hi Christoph,
in your Identity Store, you can use LDAP Server as authentification method (Tab Workflow). You need an attribute which contains the DN of the users and fill out port and host of your directory. That means that the PW can remain in the AD. Just try it, haven't used this possibility yet. You could also use Kerberos via AD instead. These scenarios don't cover your requirement that some might be without an AD account (which is not that common).
Otherwise it's getting difficult again to get all passwords at once from your AD. You have to decrypt the passwords without a key... AD could store a lower encrypted password for NT4, which makes this a bit easier, but still "unesthetic". You get these hashes via SSL and not with the common initial load jobs.
The PW-Hook gets the passwords before they are set. That's why you could store and ecrypt the new passwords in the Identity Store and wait for 1 or 2 months till everyone had to change their password (if you use this policy).
Best regards,
Nils
Edited by: Nils Sibold on Jul 18, 2008 3:10 PM

On-Demand Process Running only for authenticated user

I have noticed that an on-demand process is running only for authenticated users - for example a download of a document. For public users it doesn't. I remember seeing a similar question related to ajax on demand in this forum but couldn't locate the thread. Does anyone knows why the process is not running for not authenticated user? The result of a download for a public user is a blank page where the authenticated user gets the file by clicking on the same link.
Thanks in advance,
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Hello Denes,
Please check if the following can help you -
Re: AJAX on public page
Re: Calling an application level on-demand process from JavaScript
Regards,
Arie.

[solved[X superlaggy after hd went out of space, but only for one user

So the netbook (eeepc 1101ha) went out of diskspace while running and froze. I freed up some space and restarted X, but it failed so I rebooted. Same story then. It either loads and becomes super slow or doesn't load at all. I use dwm wm which to my knowledge doesn't save to config files that might have been corrupted during the moment with no diskspace. Other wms have same problems too, but only for that user.
Here are some lines from /var/log/Xorg.0.log/
[ 3068.496] (**) Power Button: always reports core events
[ 3068.496] (**) Power Button: Device: "/dev/input/event4"
[ 3068.507] (II) Power Button: Found keys
[ 3068.507] (II) Power Button: Configuring as keyboard
[ 3068.507] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 3068.507] (**) Option "xkb_rules" "evdev"
[ 3068.507] (**) Option "xkb_model" "evdev"
[ 3068.507] (**) Option "xkb_layout" "us"
[ 3068.683] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 3068.683] (II) No input driver/identifier specified (ignoring)
[ 3068.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3068.684] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3068.684] (**) Sleep Button: always reports core events
[ 3068.684] (**) Sleep Button: Device: "/dev/input/event3"
[ 3068.697] (II) Sleep Button: Found keys
[ 3068.697] (II) Sleep Button: Configuring as keyboard
[ 3068.697] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 3068.697] (**) Option "xkb_rules" "evdev"
[ 3068.697] (**) Option "xkb_model" "evdev"
[ 3068.697] (**) Option "xkb_layout" "us"
[ 3068.700] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 3068.700] (II) No input driver/identifier specified (ignoring)
[ 3068.709] (II) config/udev: Adding input device USB2.0 UVC 1.3M WebCam (/dev/input/event7)
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: always reports core events
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event7"
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Found keys
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Configuring as keyboard
[ 3068.730] (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD)
[ 3068.730] (**) Option "xkb_rules" "evdev"
[ 3068.730] (**) Option "xkb_model" "evdev"
[ 3068.731] (**) Option "xkb_layout" "us"
[ 3068.742] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[ 3068.742] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3068.742] (**) Eee PC WMI hotkeys: always reports core events
[ 3068.742] (**) Eee PC WMI hotkeys: Device: "/dev/input/event5"
[ 3068.750] (II) Eee PC WMI hotkeys: Found keys
[ 3068.750] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 3068.750] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 3068.750] (**) Option "xkb_rules" "evdev"
[ 3068.751] (**) Option "xkb_model" "evdev"
[ 3068.751] (**) Option "xkb_layout" "us"
[ 3068.752] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3068.753] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3068.753] (**) AT Translated Set 2 keyboard: always reports core events
[ 3068.753] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3068.773] (II) AT Translated Set 2 keyboard: Found keys
[ 3068.774] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3068.774] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 3068.774] (**) Option "xkb_rules" "evdev"
[ 3068.774] (**) Option "xkb_model" "evdev"
[ 3068.774] (**) Option "xkb_layout" "us"
[ 3068.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.775] (II) LoadModule: "synaptics"
[ 3068.776] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3068.776] (II) Module synaptics: vendor="X.Org Foundation"
[ 3068.776] compiled for 1.8.0.902, module version = 1.2.2
[ 3068.776] Module class: X.Org XInput Driver
[ 3068.776] ABI class: X.Org XInput driver, version 9.0
[ 3068.777] (II) Synaptics touchpad driver version 1.2.2
[ 3068.777] (**) Option "Device" "/dev/input/event6"
[ 3068.823] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 3068.824] (**) Option "TapButton1" "1"
[ 3068.824] (**) Option "TapButton2" "2"
[ 3068.824] (**) Option "TapButton3" "3"
[ 3068.863] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.864] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3068.880] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3068.913] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3068.914] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.914] (II) Synaptics touchpad driver version 1.2.2
[ 3069.383] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 3069.384] (**) Option "Device" "/dev/input/mouse0"
[ 3069.397] (**) Option "TapButton1" "1"
[ 3069.397] (**) Option "TapButton2" "2"
[ 3069.397] (**) Option "TapButton3" "3"
[ 3069.417] Query no Synaptics: 6003C8
[ 3069.417] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 3069.418] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 3069.430] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 3069.430] (II) UnloadModule: "synaptics"
[ 3069.431] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 3069.431] (II) No input driver/identifier specified (ignoring)
Any ideas?
Last edited by idjut (2010-07-13 00:43:04)

R00KIE wrote:
I'm not familiar with DWM but I would look inside ~/.local ~/.config and ~/.cache , maybe something is stored there.
If that doesn't work you may try moving all the hidden stuff to a backup folder and start the X session again.
Something must be causing that and most probably it's some dot file stashed away inside one of those dot directories (you say new users work just fine so it's not a system problem).
Apart from this I'm out of ideas, once I had XFCE (I know its not the same) act really strange and the problem was related with some corrupted saved session file, once I deleted it everything was fine again.
Didn't work! Any other tips, ideas?

Pro Mac Pro Tip for Lion Users

Been frustrated with your Mac Pro since upgrading to Lion? Maybe I can help.
I’ve spent the last few months just hating OS X Lion. I thought Apple should have given it a better nickname, like “System Hang” or “Patience is a Virtue.” I spent more time starring at the dreaded spinning beach ball of death than I did getting work done. Where I once kept open as many browser windows and tabs as I liked, I began closing everything I didn’t absolutely need right then. Aperture 3, which I adore, had become impossible to use.
Things had gotten so frustrating, I was seriously thinking about doing a clean system install — something I used to have to do every 6-12 months with Windows, and was one of the reasons I made the switch.
But there were other things I could do to speed things up, and here they are in no particular order:
• Replace system HDD with a super fast SSD. But that’s expensive, and a hassle. First you have to clone your existing system on it, and all four of my drive bays are full. So I’d have to put the SSD in a FireWire-freindly enclosure, clone it the slow way, then swap it in for the HDD.
• Put in a faster video card. This seemed the least-likely to do any good, and I’m not exactly taxing the card this machine shipped with more than two years ago.
• New CPU. I could install a non-sanctioned EFI update, and swap out my quad-core Xeon for something sexier. But not only is that expensive, it also voids my warranty.
• More memory! This is usually the go-to upgrade. It’s easy. It isn’t very expensive. And even if it doesn’t do a whole lot, you know you want it anyway.
Now, this Xeon processor has three memory channels, but the motherboard has four memory slots. If you fill all four, your memory takes a speed hit — but you can fit in more memory. If you use just three matched memory sticks, the processor can take full advantage of its memory architecture.
When I bought this box, I also picked up four 2GB memory sticks. I figured I could try it both ways: 3 sticks for 6GB of faster access or all 4 for 8GB of restricted access. Under previous versions of OS X — Leopard and Snow Leopard — things ran faster and smoother with the full 8GB.
Well let me tell you: Lion does not like slow memory. Not one bit.
Yesterday I ditched all four 2GB sticks and replaced them with three 4GB sticks. The 50% increase in memory space is a nice bit of room for Lion to run around in, but I’m wagering that leaving that fourth slot unfilled was what really did the trick. Because let me tell you, right now this Lion roars. All the bad things I said about Lion? I take them all back. And if you’re a frustrated Mac Pro/Lion user, heed my advice.
At this very moment, I’m looking at email, 40 or 50 browser tabs in six windows, my calendar and iTunes blown up to full screen, ripping a Blu-Ray and crunching it down to 720p at 30fps, sorting through more than 2,000 RAW images in Aperture, doodling around with three different Pages documents, and two Christmas shopping spreadsheets — all strewn across nine virtual desktops, while in the background iTunes is serving up two video streams to Apple TVs upstairs and Time Machine is cranking away to keep my data safe.
My Mac is a Mac again.

Hi ...
Avoid MacKeeper. Results of an ASC forum search for MacKeeper > Community Search: Apple Support Comments are discouraging for the most part. You don't need third party utlities installed to take care of your Mac. For the most part they do more harm than good.
Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Disabling the Lion "resume" feature may help.
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
You can use Lion Recovery to repair the startup disk and reinstall the Mac OS X.

Latest Update: New Camera Profiles for the D700 (Version 4)

I see with the latest update of Lightroom brought with it version 4 of the camera profiles. I've dabbled with using several of them, especially the Camera Portrait. I have versions that consist of for example:
Camera Portrait
Camera Portrait beta 2
Camera Portrait v3
Camera Portrait v4
Of course, the previous versions can be left as is however the list I have now is quite long and wanted to know if I would be missing out if I were to discard/delete previous versions and just keep the v4's.
I realize this is personal preference however are the newest versions (version 4) for Camera D2X, Camera Landsape, Camera Neutral, Camera Portrait, Camera Standard and Camera Vivid for the D700 all one needs for the average Lightroom user?
Thanks in advance.

Thank you all for giving me your advice. Like kbkbn said, the older versions don't do anything by being there and you never know if you want to use one of them in the future. I will start using the version 4 profiles and compare them more to the older versions. Thanks again.
Are there any other worthwhile sources of profiles? I do have a few I created myself with my Color Checker Passport for specific shooting locations in my yard for specific times of days.
Thanks again.

Installed Safari update 6.1.1 for Lion today. Browser now running very slow and keep getting the "spinning pizza".

I installed the Safari update 6.1.1 today for Lion. Now my browser running very slow, keeps locking up & getting the "spinning wheel". It stops spinning eventually, but recurs constantly when I try to navigate elsewhere, including within this site. Screen also jumpy/almost flickering. No other browsers installed on machine, only extension used is AdBlock. Tried to search for others with this issue, but not finding it posted and machine locking up is making it difficult. Any help much appreciated!

Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Just check the box beside “Remove all website data”.
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extension, and launch Safari.
Safari > Preferences > Extensions

Latest update installed, then only 1 tab works. Others show up, but don't work.

The latest update came on Tuesday, I think. The problem was immediate, but I waited a couple of days to see if someone else could report it and it would be fixed. That didn't happen and, because the Feedback doesn't work (it won't fire up in the first tab), I had to find another way. It took a while but I finally got here.
When FF comes up, there's one tab showing. I can use that tab - ONLY. And, if I need to change the page on that tab, I have to back out of FF totally and restart it.
I can click on new tabs and fill the screen with them, if I want, and, I can even click content to the tab - but it doesn't load or show on the screen, even when that tab is selected. I even left several tabs 'cooking' and went back to my AOL browser. When I returned, the tabs were still trying to load but obviously they couldn't.
I am so far behind in my work that it will take me DAYS AND DAYS to catch up. I need to be able to use several tabs plus some bookmarks and other stuff, all at once. I normally have 5 tabs programmed in an, until this update, FF would open with at least those 5 tabs sitting, waiting to get started.
PLEASE, get me up and running as quickly as possible. I really don't want to go back to IE or fire up Chrome because my bookmarks are very important to what I do. I really, really like FF (and hate IE), so PLEASE, PLEASE, PLEASE.

I have exactly the same problem and a reinstallation won't solve anything !
You will even not be able to finalize the installation !
Freeze in Windows Seven after several minutes even after having cleared CMOS + loads of optimal mode or fail safe mode...
Here is my computer:
-MSI P55M-GD45
-Intel CoreI5 750
-Noctua NH-D14---> CPU @ 28°
-2 X 1Go Crucial Balistix DDR3
-2 X SAMSUNG SPINPOINT T166 - 500GO SATA II 7200TRS/MN 16MO (HD501LJ)
-2 X Seagate 1.5 To 32 Mo 7200 tpm
-2600XT fanless gigabyte
-Corsair 520VX or HX I forgot it
No problem with the last bios 1.1.
!!!!! Totaly unstable with the last bios 1.5 !!!
I read your solution about reinstalling the OS after a bios update (that's the first
time that I read it and I owned something as 15 motherboards in the last 10 years...but
you have 20k post so I think that you know what you write...)
So I tried to REINSTALL after "upgrade" of the firmware 1.5 of the MSI P55M-GD45.
I did it with a USB KEY....not [email protected] with defaults values !
The only thing to do is downgrade the bios in 1.1 and now no problem @ 3.8 GHz !!!
WHY IS THIS BIOS SO unstable ?
What will MSI do ?
I have never had a so unstable motherboard after a bios upgrade !

HOW create support message ONLY for KEY USER

Hi all,
I just configured my service desk and I wanted to give only the key users the permission to create support messages. But every user have the rights to create a message from the satellite system.
How can I prevent that? Is it possible to hide the option in the menu bar (help - create message) for non-key-users? The key users have the role SAP_SV_FDB_NOTIF_BC_CREATE . non sap users have just standard roles for hr, ...
Thanks in advance!

hi,
in the documentation it is written
Create messages from satellite systems with Help ® Create Support Message
SAP_SOL_SERVTRANS_CREATE
Authorization object S_RFC,
profile S_RFC_VERS with the activity Execute for the object SAPSMO*
this is working fine
see link http://help.sap.com/saphelp_sm310/helpdata/en/71/50548566324a7491916585fe73a2b4/content.htm
best regards Xavier

Latest update 3.3 only for lion users? total mess

Similar Messages

Maybe you are looking for