Latest version of itunes (11.0.2.26) no longer registers shows i've watched on my iPod as "watched"
Until this version of iTunes, whenever I watched a TV show on my iPod classic, it would be removed from the iPod that next time i synched with my laptop. For some reason, this is no longer happening. I'd like to restore this behavior, which i believe is the default design. Did the philosophy change with version 11.0.2?
If you use the Manually manage music and videos setting on the iPod's Summary tab in iTunes, it may not automatic sync such supporting data (because the library in iTunes is not directly related to the library on the iPod). Do you use that setting? Or do you use automatic syncing?
Similar Messages
-
I cannot download the latest version of itunes to my Mac OS X 10.5.8 to sync with my new ipod...any suggestions?
You need to upgrade the computer's OS. Choose About this Mac from the Apple menu and check the processor.
If it's a PowerPC Mac, it can't sync that device.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, upgrade it as if it was a Core Duo Mac, and once done, if desired, open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
Some device models require Mac OS X 10.7.5 to sync.
(118877) -
Since downloading the latest version of iTunes my iPhone 4 is not recoginized
Hi, I don't know if this will help you but I have both an iPhone 4 and a iPhone 6 that would not work. In my case the latest version of iTunes is 12.01.035. I remembered having a similar problem on Windows 7/64 bit a while back and decided to reboot my computer go into the bios and basically disabled a bios setting called Intel xHCI Mode. This flag in the bios is used to turn off the USB 3.0 controllers. As soon I did that, and saved my system booted fine and it noticed both phones just fine. I tested this several more time on my system which is still fairly new having been build from scratch last last year. Each time when I turned USB3.0 back on, iTunes and Windows 7 for that matter would not notice my phones. If you do a search on that bios setting you will find the USB 3.0 has caused problems with many of the older device drivers and technology.
-
Hi there. I recently updated to the latest version of itunes, and am unable to get newly-purchased ibooks onto my ipod - I don't see any way to click and drag the ibook. Am I missing something?
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?
Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic. -
HT1351 my ipod classic will no longer sync any movies on latest version of itunes --- why?
Both of my iPods will no longer sync any movies. They always did before without any problem. I am using latest version of itunes. Any suggestions?
If you have an iBook G4, (PPC) you can't do much.
But if that is a MacBook (intel) you may be able to
upgrade the OS X, if the hardware is up to it...
Since there were about nine different build models
of MacBook (not powerpc iBook) to identify what
one you have would be the first step to knowing
what OS X and RAM upgrades it could use.
If the computer is not already at OS X 10.6.8,
it can't go online to get or use OS X 10.7.5. So,
when you more accurately describe the 'Book,
detailed information is available.
When you find the serial number, there is a web
page that can be used to identify by serial no.
http://www.powerbookmedic.com/identify-mac-serial.php
That'd be a first step. Or even the Model number
which should be visible on the outer case by hinge.
Good luck & happy computing! -
My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
ThanksTry a different cable. And are you connecting directly to your computer or through a USB hub?
-
I just downloaded the latest version of iTunes and now my computer does not recognize my ipod nano. How do I fix this?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
Error message when installing the latest version of itunes
I tried installing the latest version of iTunes and received an error message. Asked to reinstall, but still doesn't work. I receive Windows Error 127 and AdiAdID_AcuireMatchSlotIfNecessary error messages.
Hey AstuteInvestor,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Just downloaded the latest version of iTunes, but can't find "Power Search" anymore to locate specific songs or artists quickly? "Browse" takes waaay too long. Any suggestions?
http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?
Hi Pittgo76,
If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
Apple Support: No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Regards,
- Brenden -
I recently downloaded the latest version of Itunes. As soon as that was finalized, my Ipod stopped showing up on the screen when I was in Itunes and I can't sync new songs and audiobooks to it. How do I get my Ipod to work again? It charges up and plays just fine, it will not sync or update with Itunes. There is nothing showing on Itunes that I can manually sync it, either. That option can't be clicked on. I have no other devices other than the Ipod that syncs with Itunes now, I used to have an Iphone, but I don't anymore
Hey melthepest,
Thanks for the question. I understand that your iPo classic is not displayed in iTunes when connected to your computer. The following articles include troubleshooting steps that may help resolve your issue, depending on the symptoms:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
iTunes reports that "iTunes cannot recognize this iPod at this time"
http://support.apple.com/kb/TS1416
Thanks,
Matt M. -
Also, the "burn playlist to disc" command has disappeared from the File options. I downloaded the latest version of iTunes but that only restored tracks I'd bought from the iTunes store. I also tried setting up another logon.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2
Maybe you are looking for
-
Capturing HD video directly into my computer using HDD Cam & FCE 3.5
I have a JVC Everio GZ-HD7. Unfortunately, I didn't realize how "crappy" these HDD cams can be, in time to be able to return it. It records in 4GB sections, which is bad for me because I record at a studio and I can't have songs being cut off all the
-
What is the best approach to upgrading from LV7.1/DSC tags to LV2012/DSC shared variables, in multiple VIs running on multiple platforms? Our system is composed of about 5 PCs running Windows 2000/LV7.1 Runtime, plus a PLC, and a main controller run
-
Trying to understand iPhone sync better
Say, I sync'ed my phone and after that I made some new pictures with it, but also deleted one by accident. Can I restore the picture that has been deleted? If so, then how? I did the sync but it didn't restore the deleted picture...
-
Re: Help in playing mpeg2 video & VCD & DVD
MPEG2 is not supported. MPEG4,I guess you mean DivX;), is able to be played if you download a codec by IBM. If you find a MPEG2 Codec please let me know US101
-
EM connecting to two different databases
How do I connect to a second database? I can connect to the first database ... then I create a second database... but can't find the second database so I can administer it.