Launching the First node of the folder automatically
Hi,
I have a role in the portal in which the first node is a folder. When i click on the Role in the top level navigation, my requirement is that it should automatically open the first page/iview within this folder.
I have checked the properties of iview like mentioned below, but these properties works if we click on folder. In my case without even clicking on the folder i want the first iview of the folder to be displayed bydefault when i click on role.
1. Clicking Folder Name Launches First Node
2. Default Entry for Folder
Any inputs in this regard , will be of great help.
MyRole (we have only single level navigation on the top)
--> MyFolder(is visible in detailed level navigation)
--> MyIview (this iview has to be shown by default when I click on the Role)
Regards,
Sreeram
Hi,
First, You may add a folder under Workset and not under Role. Next you have the property "Default Entry for Folder" for the iview. set this value as yes.
I have created a role called "DemoRole" which has "DemoWorkset". This workset has a folder by name "DemoFolder".
Now I created two url iviews one is google and the other one is yahoo which are assigned to this "Demofolder". Note, I didn;t create any page, but directly assigned the iviews to the "DemoFolder"
Google iview is assigned first and then yahoo iview. so by defauult when i click on "DemoRole" i see only the "DemoFolder" that too in closed state.
Now I have assigned "Default Entry for Folder" property to the second iview i.e yahoo iview.
Next time i click on "DemoRole" I see that the "DemoFolder" is automatically in opened status and bydefault the second iview i.e yahoo iview is opened.
I hope its clear to u now. let me know if u have any doubts.
Regards,
Sreeram
Similar Messages
-
How to display the first node in a nested folder?
If my navigation structure has nested folders and the first page node is in a nested folder. Is it possible to have user click the outer folder and the first node displayed in the content area?
Hi there,
please refer to the document "Installing Patch 4 for Enterprise Portal 6.0 SP2" (EP6SP2Patch4_install_v5.pdf) to be found on Service Marketplace; there: "6.3 Navigation Enhancements", there: "6.3.2 Default Entry for Folder" & "6.3.4 DTN: Clicking Folder Name Launches First Node".
This should answer your question if you think about nesting with one level (I don't think it works over more levels, imagin Folder A only with subfolders, for instance Folder AA with a page AAA under it. Clicking on A will not open AAA, I think, even if this is the first "displayable" element; but I didn't check it out).
Hope it helps
Detlev -
Grid installation: root.sh failed on the first node on Solaris cluster 4.1
Hi all,
I'm trying to install the Grid (11.2.0.3.0) on the 2 node-clusters (OSC 4.1).
When I run the root.sh on the first node, I got the out put as follow:
xha239080-root-5.11# root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /Grid/CRShome
Enter the full pathname of the local bin directory: [/usr/local/bin]:
/usr/local/bin is read only. Continue without copy (y/n) or retry (r)? [y]:
Warning: /usr/local/bin is read only. No files will be copied.
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /Grid/CRShome/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding Clusterware entries to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'xha239080'
CRS-2676: Start of 'ora.mdnsd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'xha239080'
CRS-2676: Start of 'ora.gpnpd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2676: Start of 'ora.cssd' on 'xha239080' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk 9cdb938773bc4f16bf332edac499fd06.
Successful addition of voting disk 842907db11f74f59bf65247138d6e8f5.
Successful addition of voting disk 748852d2a5c84f72bfcd50d60f65654d.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 9cdb938773bc4f16bf332edac499fd06 (/dev/did/rdsk/d10s6) [DATA]
2. ONLINE 842907db11f74f59bf65247138d6e8f5 (/dev/did/rdsk/d8s6) [DATA]
3. ONLINE 748852d2a5c84f72bfcd50d60f65654d (/dev/did/rdsk/d9s6) [DATA]
Located 3 voting disk(s).
Start of resource "ora.cssd" failed
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2674: Start of 'ora.cssd' on 'xha239080' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'xha239080'
CRS-2681: Clean of 'ora.cssd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'xha239080'
CRS-2677: Stop of 'ora.gipcd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'xha239080'
CRS-2677: Stop of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Grid Infrastructure stack
Failed to start Cluster Synchorinisation Service in clustered mode at /Grid/CRShome/crs/install/crsconfig_lib.pm line 1211.
/Grid/CRShome/perl/bin/perl -I/Grid/CRShome/perl/lib -I/Grid/CRShome/crs/install /Grid/CRShome/crs/install/rootcrs.pl execution failed
xha239080-root-5.11# history
checking the ocssd.log, I see some thing as follow:
2013-09-16 18:46:24.238: [ CSSD][1]clssscmain: Starting CSS daemon, version 11.2.0.3.0, in (clustered) mode with uniqueness value 1379371584
2013-09-16 18:46:24.239: [ CSSD][1]clssscmain: Environment is production
2013-09-16 18:46:24.239: [ CSSD][1]clssscmain: Core file size limit extended
2013-09-16 18:46:24.248: [ CSSD][1]clssscmain: GIPCHA down 1
2013-09-16 18:46:24.249: [ CSSD][1]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2013-09-16 18:46:24.250: [ CSSD][1]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2013-09-16 18:46:24.250: [ CSSD][1]clssscExtendLimits: The current soft limit for locked memory is 4294967293, hard limit is 4294967293
2013-09-16 18:46:24.250: [ CSSD][1]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2013-09-16 18:46:24.250: [ CSSD][1]clssscSetPrivEnv: Setting priority to 4
2013-09-16 18:46:24.253: [ CSSD][1]clssscSetPrivEnv: unable to set priority to 4
2013-09-16 18:46:24.253: [ CSSD][1]SLOS: cat=-2, opn=scls_mem_lockdown, dep=11, loc=mlockall
unable to lock memory
2013-09-16 18:46:24.253: [ CSSD][1](:CSSSC00011:)clssscExit: A fatal error occurred during initialization
Do anyone have any idea what going on and how can I fix it ?Hi,
solaris has several issues with DISM, e.g.:
Solaris 10 and Solaris 11 Shared Memory Locking May Fail (Doc ID 1590151.1)
Sounds like Solaris Cluster has a similar bug. A "workaround" is to reboot the (cluster) zone, that "fixes" the mlock error. This bug was introduced with updates in september, atleast to our environment (Solaris 11.1). Prior i did not have the issue and now i have to restart the entire zone, whenever i stop crs.
With 11.2.0.3 the root.sh script can be rerun without prior cleaning up, so you should be able to continue installation at that point after the reboot. After the root.sh completes some configuration assistants need to be run, to complete the installation. You need to execute this manually as you wipe your oui session
Kind Regards
Thomas -
I need to get the tagName after a node of the first child of the Root
Hi All,
I need to get the TagName of the Node immediete after the Root. I won't know what is the TagName, and based on the Tagname only I can process the records.
For example I might receive a SALES object or a MARKETING object wrapped under the root.
eg.
<PARENT>
<SALES>
</SALES>
</PARENT>
or
<PARENT>
<MARKETING>
</MARKETING>
</PARENT>
I tried to using like this
DocumentBuilder documentBuilder = documentBuilderFactory.newDocumentBuilder();
File file = new File("c:/example.xml");
document = documentBuilder.parse(file);
Node node = document.getDocumentElement().getFirstChild();
System.out.println("node Name:" +node.getNodeName());
System.out.println("node Value:" +node.getNodeValue());
It returns only something like #text, but I need the response like 'SALES'.
Can anyone let me know if im missing something somewhere.
thanks in advance,
HarishThat's because the first child of the document element is that whitespace text node between <PARENT> and <SALES>. You need to scan through the children of the document element until you find one that is an Element node.
-
Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.
Gavin Lawrie wrote:
Once it had been established that the iWork rewrite had resulted in some features being lost and others broken, and once Apple had acknowledged the concerns* and suggested they are working on fixes**, I'm not sure what else there is to achieve.
You are writing that in the perspective of having read about it here already. Repeated often enough that you encountered it somewhere in the posts.
Users are flooding in here and don't know any of this. Of course we have to repeat everything endlessly.
Because I like to give precise, understandable and workable answers to repeated questions, and Apple doesn't allow sticky posts here, I created a separate forum which users can consult to look up real answers, and contribute for themselves if they have something valuable to add:
http://www.freeforum101.com/iworktipsntrick/
There is a section purely devoted to Pages 5. Add whatever answers you feel will lighten the problems of Apple's 'upgrades'.
Peter
* Where have they acknowledged anything?
** They have barely anything listed, compared to the massive list of deleted features, and nothing but an extraordinarily long time frame considering they created the problems here and now. Apple has not said they will do anything at all about fixing the real issues, the biggest of which is that the new iWork apps break virtually all the work of existing users. -
Failure at final check of Oracle CRS stack. 10 on the first node.
Hi everyone
I trying to install an Oracle RAC 10gr2 on an Oracle Enterprise Linux AS release 4 (October Update 7) , but I'm having this problem
root@fporn01 crs# ./root.sh
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname fporn01 for node 1.
assigning default hostname fporn02 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: fporn01 fporn01-priv fporn01
node 2: fporn02 fporn02-priv fporn02
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
+10+
forget about the node names!!!!
but on the second node everything went fine, so I'm sure this is not a connectivity issue.
the iptables service is stopped and disabled
check the results after running the root.sh script
root@fporn02 ~# /u01/app/crs/root.sh
Checking to see if Oracle CRS stack is already configured
+/etc/oracle does not exist. Creating it now.+
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname fporn01 for node 1.
assigning default hostname fporn02 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: fporn01 fporn01-priv fporn01
node 2: fporn02 fporn02-priv fporn02
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
fporn02
CSS is inactive on these nodes.
fporn01
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
this is the log of crs on the first node
root@fporn01 bin# cat /u01/app/crs/log/fporn01/alertfporn01.log
+2009-06-24 17:27:37.695+
client(9045)CRS-1006:The OCR location /u02/oradata/orcl/OCRFile_mirror is inaccessible. Details in /u01/app/crs/log/fporn01/client/ocrconfig_9045.log.
+2009-06-24 17:27:37.741+
client(9045)CRS-1001:The OCR was formatted using version 2.
+2009-06-24 17:28:24.544+
client(9092)CRS-1801:Cluster pdb-rac configured with nodes fporn01 fporn02 .
this is the log of crs on the second node
root@fporn02 ~# cat /u01/app/crs/log/fporn02/alertfporn02.log
+2009-06-24 18:09:09.307+
cssd(16991)CRS-1605:CSSD voting file is online: /u02/oradata/orcl/CSSFile. Details in /u01/app/crs/log/fporn02/cssd/ocssd.log.
+2009-06-24 18:09:09.307+
cssd(16991)CRS-1605:CSSD voting file is online: /u02/oradata/orcl/CSSFile_mirror1. Details in /u01/app/crs/log/fporn02/cssd/ocssd.log.
+2009-06-24 18:09:09.310+
cssd(16991)CRS-1605:CSSD voting file is online: /u02/oradata/orcl/CSSFile_mirror2. Details in /u01/app/crs/log/fporn02/cssd/ocssd.log.
+2009-06-24 18:09:12.441+
cssd(16991)CRS-1601:CSSD Reconfiguration complete. Active nodes are fporn02 .
I have rechecked the Remote Access / User Equivalence
after run the OCRCHECK command ia have this information
root@fporn01 bin# ./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 262144
Used space (kbytes) : 312
Available space (kbytes) : 261832
ID : 255880615
Device/File Name : /u02/oradata/orcl/OCRFile
Device/File integrity check succeeded
Device/File Name : /u02/oradata/orcl/OCRFile_mirror
Device/File integrity check succeeded
Cluster registry integrity check succeeded
on the second node i get the same output
root@fporn02 bin# ./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 262144
Used space (kbytes) : 312
Available space (kbytes) : 261832
ID : 255880615
Device/File Name : /u02/oradata/orcl/OCRFile
Device/File integrity check succeeded
Device/File Name : /u02/oradata/orcl/OCRFile_mirror
Device/File integrity check succeeded
Cluster registry integrity check succeeded
I have reviewed the following metalink notes but none of them seems to solve my problem
*344994.1*
*240001.1*
*725878.1*
*329450.1*
*734221.1*
I have done a research trough many forums, but always the fail is on the second node, but my fail is on the first node.
I hope anyone could help me.
this is the output of cluvfy
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "fporn01"
Destination Node Reachable?
fporn01 yes
fporn02 yes
Result: Node reachability check passed from node "fporn01".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
fporn02 passed
fporn01 passed
Result: User equivalence check passed for user "oracle".
Checking administrative privileges...
Check: Existence of user "oracle"
Node Name User Exists Comment
fporn02 yes passed
fporn01 yes passed
Result: User existence check passed for "oracle".
Check: Existence of group "oinstall"
Node Name Status Group ID
fporn02 exists 501
fporn01 exists 501
Result: Group existence check passed for "oinstall".
Check: Membership of user "oracle" in group "oinstall" as Primary
Node Name User Exists Group Exists User in Group Primary Comment
fporn02 yes yes yes yes passed
fporn01 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" as Primary passed.
Administrative privileges check passed.
Checking node connectivity...
Interface information for node "fporn02"
Interface Name IP Address Subnet
eth0 10.218.108.245 10.218.108.0
eth1 192.168.1.2 192.168.1.0
Interface information for node "fporn01"
Interface Name IP Address Subnet
eth0 10.218.108.244 10.218.108.0
eth1 192.168.1.1 192.168.1.0
eth2 172.16.9.210 172.16.9.0
Check: Node connectivity of subnet "10.218.108.0"
Source Destination Connected?
fporn02:eth0 fporn01:eth0 yes
Result: Node connectivity check passed for subnet "10.218.108.0" with node(s) fporn02,fporn01.
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
fporn02:eth1 fporn01:eth1 yes
Result: Node connectivity check passed for subnet "192.168.1.0" with node(s) fporn02,fporn01.
Check: Node connectivity of subnet "172.16.9.0"
Result: Node connectivity check passed for subnet "172.16.9.0" with node(s) fporn01.
Suitable interfaces for the private interconnect on subnet "10.218.108.0":
fporn02 eth0:10.218.108.245
fporn01 eth0:10.218.108.244
Suitable interfaces for the private interconnect on subnet "192.168.1.0":
fporn02 eth1:192.168.1.2
fporn01 eth1:192.168.1.1
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
fporn02 7.93GB (8310276KB) 512MB (524288KB) passed
fporn01 7.93GB (8310276KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
fporn02 9.57GB (10037300KB) 400MB (409600KB) passed
fporn01 9.55GB (10012168KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
fporn02 8.81GB (9240568KB) 1GB (1048576KB) passed
fporn01 8.81GB (9240568KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
fporn02 i686 i686 passed
fporn01 i686 i686 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
fporn02 2.6.9-78.0.0.0.1.ELhugemem 2.4.21-15EL passed
fporn01 2.6.9-78.0.0.0.1.ELhugemem 2.4.21-15EL passed
Result: Kernel version check passed.
Check: Package existence for "make-3.79"
Node Name Status Comment
fporn02 make-3.80-7.EL4 passed
fporn01 make-3.80-7.EL4 passed
Result: Package existence check passed for "make-3.79".
Check: Package existence for "binutils-2.14"
Node Name Status Comment
fporn02 binutils-2.15.92.0.2-25 passed
fporn01 binutils-2.15.92.0.2-25 passed
Result: Package existence check passed for "binutils-2.14".
Check: Package existence for "gcc-3.2"
Node Name Status Comment
fporn02 gcc-3.4.6-10.0.1 passed
fporn01 gcc-3.4.6-10.0.1 passed
Result: Package existence check passed for "gcc-3.2".
Check: Package existence for "glibc-2.3.2-95.27"
Node Name Status Comment
fporn02 glibc-2.3.4-2.41 passed
fporn01 glibc-2.3.4-2.41 passed
Result: Package existence check passed for "glibc-2.3.2-95.27".
Check: Package existence for "compat-db-4.0.14-5"
Node Name Status Comment
fporn02 compat-db-4.1.25-9 passed
fporn01 compat-db-4.1.25-9 passed
Result: Package existence check passed for "compat-db-4.0.14-5".
Check: Package existence for "compat-gcc-7.3-2.96.128"
Node Name Status Comment
fporn02 missing failed
fporn01 missing failed
Result: Package existence check failed for "compat-gcc-7.3-2.96.128".
++Check: Package existence for "compat-gcc-c++-7.3-2.96.128"++
Node Name Status Comment
fporn02 missing failed
fporn01 missing failed
++Result: Package existence check failed for "compat-gcc-c++-7.3-2.96.128".++
++Check: Package existence for "compat-libstdc++-7.3-2.96.128"++
Node Name Status Comment
fporn02 missing failed
fporn01 missing failed
++Result: Package existence check failed for "compat-libstdc++-7.3-2.96.128".++
++Check: Package existence for "compat-libstdc++-devel-7.3-2.96.128"++
Node Name Status Comment
fporn02 missing failed
fporn01 missing failed
++Result: Package existence check failed for "compat-libstdc++-devel-7.3-2.96.128".++
Check: Package existence for "openmotif-2.2.3"
Node Name Status Comment
fporn02 openmotif-2.2.3-10.2.el4 passed
fporn01 openmotif-2.2.3-10.2.el4 passed
Result: Package existence check passed for "openmotif-2.2.3".
Check: Package existence for "setarch-1.3-1"
Node Name Status Comment
fporn02 setarch-1.6-1 passed
fporn01 setarch-1.6-1 passed
Result: Package existence check passed for "setarch-1.3-1".
Check: Group existence for "dba"
Node Name Status Comment
fporn02 exists passed
fporn01 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
fporn02 exists passed
fporn01 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
fporn02 exists passed
fporn01 exists passed
Result: User existence check passed for "nobody".
System requirement failed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.forget about my last post, it was my mistake, I rebooted the server and the clustered file system service did not start up at boot time.
sorry
this is what I really got in /var/log/messages
after manually running crs daemons
Jun 26 16:43:07 fporn01 su(pam_unix)[10020]: session opened for user oracle by (uid=0)
Jun 26 16:43:07 fporn01 su(pam_unix)[10020]: session closed for user oracle
Jun 26 16:43:07 fporn01 logger: Cluster Ready Services completed waiting on dependencies.
Jun 26 16:44:07 fporn01 su(pam_unix)[9977]: session opened for user oracle by (uid=0)
Jun 26 16:45:31 fporn01 su(pam_unix)[10293]: session opened for user oracle by (uid=0)
Jun 26 16:45:32 fporn01 su(pam_unix)[10293]: session closed for user oracle
Jun 26 16:45:32 fporn01 logger: Cluster Ready Services completed waiting on dependencies.
Jun 26 16:45:40 fporn01 su(pam_unix)[10351]: session opened for user oracle by (uid=0)
Jun 26 16:45:40 fporn01 su(pam_unix)[10351]: session closed for user oracle
Jun 26 16:45:40 fporn01 su(pam_unix)[10415]: session opened for user oracle by (uid=0)
Jun 26 16:45:40 fporn01 su(pam_unix)[10415]: session closed for user oracle
Jun 26 16:45:40 fporn01 logger: Cluster Ready Services completed waiting on dependencies.
Jun 26 16:46:32 fporn01 su(pam_unix)[10591]: session opened for user oracle by (uid=0)
Jun 26 16:46:40 fporn01 logger: Running CRSD with TZ =
after running ps -ef | grep -E 'init|d.bin|ocls|oprocd|diskmon|evmlogger|PID'
[root@fporn01 ~]# ps -ef | grep -E 'init|d.bin|ocls|oprocd|diskmon|evmlogger|PID'
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 15:33 ? 00:00:00 init [5]
root 9869 7951 0 16:40 pts/1 00:00:00 [init.crsd] <defunct>
oracle 10053 9977 0 16:44 ? 00:00:00 /u01/app/crs/bin/evmd.bin
root 10249 7951 0 16:45 pts/1 00:00:00 /bin/sh /etc/init.d/init.cssd fatal
root 10341 7951 0 16:45 pts/1 00:00:00 /u01/app/crs/bin/crsd.bin reboot
root 10551 10249 0 16:46 pts/1 00:00:00 /bin/sh /etc/init.d/init.cssd daemon
oracle 10618 10592 0 16:46 ? 00:00:00 /u01/app/crs/bin/ocssd.bin
oracle 10926 10053 0 16:46 ? 00:00:00 /u01/app/crs/bin/evmlogger.bin -o /u01/app/crs/evm/log/evmlogger.info -l /u01/app/crs/evm/log/evmlogger.log
root 16658 9461 0 16:50 pts/2 00:00:00 grep -E init|d.bin|ocls|oprocd|diskmon|evmlogger|PID
CRS daemons finally work
*but i get this error when i run [oracle@fporn01 cluvfy]$ ./runcluvfy.sh stage -post crsinst -n fporn01,fporn02 -verbose*
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "fporn01"
Destination Node Reachable?
fporn01 yes
fporn02 yes
Result: Node reachability check passed from node "fporn01".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
fporn02 passed
fporn01 passed
Result: User equivalence check passed for user "oracle".
ERROR:
CRS is not installed on any of the nodes.
Verification cannot proceed.
Post-check for cluster services setup was unsuccessful on all the nodes. -
Zen Stone Plus Speaker. Browse music without starting the first song in the next fold
Hi everyone,
I'm not sure what I want is possible.
I've had this player for about a?week now and I believe I could browse to the folders while listening to a song. For some reason when I do that now the player?start playing the first song of every folder when I browse through it.
I'm starting to doubt if I remember it right that it was possible to browse through while listening to a song before?
I tried playing with the setting and even did the recovery tool thing to put the player back at the setting it came with. But it didn't work.
Anyone know if this is posible, and how?
Thanks.Tag support: the ability to select music by album/artist/track instead of folders
Display always on option - i know its to help save battery life but sometimes it would be helpful if the display stayed on
Display artist and song name, inst4ead of just the song name/file name
Alarm clock function: my Zen stone plus has a speaker, and a clock function. My Zen Xtra has a clock and an alarm clock function but no speaker other than headphones (if any are plugged in) for the alarm to sond through, the same is true with my visio:M? the Zen Stone plusw/speaker has a clock but no alarm, and if anything it would make a fantastic little alarm clock with a 'sound' to music or wsound to beep? function. -
In Pages, when I hit the return button, the first letter on the new line is not capitalises. How do I get it to capitalise automatically?
Right click the Back button and choose the page you want to go to from the list.
'''N.B.''' I noticed that your Flash installation is out of date which exposes your system to attack. See: http://www.adobe.com/support/security/bulletins/apsb11-18.html<br><br>
Update via http://get.adobe.com/flashplayer/ -
Hi all,
Firstly I was using the single CUCM7.0 server with the single UCCX 7.0 server. Now I am going to add the second CUCM and UCCX in the cluster. I was first configured the UCCX server as a single node. Now I have to configure this as a first node. How I could configure this from single node to the first node without affecting it's configurations..??????
Regards
Ali RazaHi Aaron,
How could we do the change on Imhost file. How we add the both servers in that file?
Below is the Imhost file txt.
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
# #PRE
# #DOM:
# #INCLUDE
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
# The following example illustrates all of these extensions:
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
Regards
Ali Raza -
I have this XML..
<node Kids="5" label="1105 Media">
<node Kids="0" label="101 Communications"/>
<node Kids="0" label="1105 Government Information
Group"/>
<node Kids="0" label="CPM Group"/>
<node Kids="0" label="FTP Online"/>
<node Kids="0" label="Stevens Publishing"/>
</node>
How do I grab the first node?
<node Kids="5" label="1105 Media">Lots of ways to do it and here is one way
myXml is your xml with the node values.
var x1 : XMLList = myXml.children();
var x2 : Object = x1[0]; -
I am using my Description as the caption on Slideshow. I ticked the "Show Title Slide" button and iPhoto physically copied the description on the first slide onto the end of every other description. I can find no way of removing them other than by hand. Unticking the "show title slide" did not reverse the situation back to my required state. Any ideas why it might have happened or how it might br resolved? Regards, Marshfrog1
Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail -
When I send pdf files to my iPhone 6 plus (IOS 8.1.2), I am only able to see the first page of the pdf when I open the attachment on the phone.
Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. -
Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men
-
Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order. This onloy seems to happen when I double-click on the song to play it in itunes. If I just hit play, this doesnt happen. As a result, I have several albums now in which the songs are in the wrong order. Its very frustrating, as this error then transfers over to my ipod every time I sync it. When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example). But then the song will have placed by Itunes as #5 of 19 for whatever reason. Itunes does not do this every time, but does it with enough frequency to be maddening. Any thoughts?
The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck. -
How to read the details in the context node of the custom controller
Hi friends,
My requirement is i enhanced the component ICCMP_BP_DETAILS , now on EH_ONSAVE i want to read the details of the Context node in the Custom COntroller .
In custom controller from ICCMP_BP_DETAIL/CuCoBPDuplicate From this in context node CUSTOMER is there in that attributes first name last name is there i want to read those details
so can u pls provide the logic for this how can i get the values.
am very new to the BSP programming
Regards
YogeshHi Suchitha,
when i am following the above code the lr_entity is not Bound, so can u pls suggest is there any thing is missing
i used the below mention code but lr_entity is not bound
DATA: lr_cuco type ref to CL_ICCMP_BP_CUCOBPDUPLICA_IMPL.
lr_entity type ref to cl_crm_bol_entity.
lr_cuco ?= me->get_custom_controller( 'ICCMP_BP_DETAIL/CuCoBPDuplicate') .
CHECK lr_cuco IS BOUND.
lr_entity ?= lr_cuco->typed_context->customer->collection_wrapper->get_current( ) .
CHECK lr_entity IS BOUND .
lr_entityIF_BOL_BO_PROPERTY_ACCESSGET_PROPERTY_AS_VALUE( iv_attibute = 'FIRST_NAME' ev_attribute = lv_firstname ) .
Please correct the code if any thing is missing
Regards,
Yogesh
Maybe you are looking for
-
Hi I am integrating Discoverer with EBS , after generating business views, and trying to query any folder , i got no data in some folders, for example Account payables :>Invoices looking in to the SQL query, Discoverer is querying view : APFG_AP_INVO
-
Dreamweaver cs6 installation won't install on windows 7 64 bit system
I'm trying to install dreamweavr cs6. It downloads using the adobe download assistant but after it initializes the intstallation nothing installs. What do I do?
-
Merging of 2 Cells in WD ABAP ALV Header & Dynamically change the header
Hello Experts, I have two main requirements with respect to WD ABAP - ALV report creation 1) Two feilds in the header of ALV GRID created in the WD ABAP screen must be merged as shown below(Month Column) , | January | February
-
What do you do when you have a cold/congestion/stuffed up?
Just curious about this. I feel a little stuffed up today and I can definitely feel it in my ears, which is sure to effect my mixing. Are there any engineer secrets I don't know about to clear this type of thing up? Medicine, drops, favorite beverage
-
My apple ID been disable for the past 3 days. i followed the direction of changing my apple ID and password on i=tune account also i changed the icloud account and my apple id is still disable. hoping you could help me out to activate my account. tha