Launching Transaction in through wizard in IC Web client

Hi Guys,
I would like to know about the configuration of transaction launcher through the wizard in IC webclient. Can someone guide me ............
Regards
Neeraj Krishna

Hi
Refer to the links below
http://help.sap.com/saphelp_crm40/helpdata/en/12/c3e68620514b499c06b8eb26874424/content.htm
http://help.sap.com/saphelp_crm40/helpdata/en/92/54ee09984b11d687bc005004f2f41f/content.htm
http://help.sap.com/saphelp_crm40/helpdata/en/92/54ee09984b11d687bc005004f2f41f/content.htm
Reward points if helpful
Dinaker vikas

Similar Messages

Launch Transaction

Hi All,
Iu2019 am trying to launch transaction CRMD_MKTDS (Data Sources for Segment Builder).
I have created the launch transaction via the wizard and made it visible in my Business Role. If I click on it in the Web UI then it opens in another screen the SAP menu screen from GUI, but not direct the CRMD_MKTDS transaction.
What should I do in order to call the transaction direct in the Web UI?
Also, does someone know if the functionality of the transaction CRMD_MKTDS is available in the standard Marketing Role or in another role?
Thank you in advance,
Roula

Hi Roula..
Regarding this pop-up for the 'Data sources' that was not appearing as it should in the web UI i decided to log a message on OSS...but apparently SAP don't have an answer for that...
Hello Hugo,
Since the old transaction CRMD_MKTDS is still used through SAP GUI i am
not able to understand why you need to create the same by new UI.
I am really not aware about how you create a trx in new UI, so i suggestyou the same old trx in SAP GUI. I do not know how will you map the
data sources in new UI. Also in future also if you are using the BW as
data source it will be very difficult to get all the data sources
from BW to new UI. So SAP suggest you to use the old transaction only
and if you face any issue in that please revert back.
Thanks and Best Regards,
So basically I would like to kindly ask you if you don't mind to have a look at my definition of my transaction launcher to compare with yours...maybe you have some parameter/ flag that I'm missing.. do you have an e-mail where I can send this info for u to have a look?
Also If you could tell me what is the value of the parameter 'WEBGUI_sample_toolbar' (1,2 or 3) that you set-up for the service /sap/bc/gui/sap/its/ it would be nice..maybe it's because of that...
Many thanks for your help and prescious time.
Best regards
Hugo

Android Web Client Capability?

Any chance of getting access to Lookout and/or citadel data through an Android phone (web client, app, or other)?

Here is how we have done it before.
The lookout process is set as seperate client & server processes. Create a virtual machine (or another system) running Remote Desktop, Lookout Client and the client process. Setup your users in remote desktop and lookout.
Go to android market place and get PocketCloud (free would work to test). Connect to the virtual machine with Remote Desktop and view the client process.
Keeps clients from directly conencting on the production machine, for Pro versions you bypass the 1 session limit for desktop, user management is simplified (lookout).
Good luck,
Mike
Forshock - Consult.Develop.Solve.

Launch CRM transaction through SAP Web Client UI

Hi,
We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
We have done the following steps using the SAP best practices (C04-Configuration guide):
1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
and ERP system with url
http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
2. we have set TSTC to synchronous (CRM and ERP)
3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
4. we have created logical link for transaction and we assigned the link to work center and business role.
The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.
Can anyone help?
Thanks in advanced.

Hi,
please also check the information in this very good blog:
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4]
Kind regards
Manfred

Portal and IC Web client Transaction Launcher conflict

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

Transaction launcher-'Transaction execute is unknown'

Hi,
I am trying to launch transaction BP in IC web client
I have configured the launcher wizard and entered the URL in transaction 'CRMC_IC_CROSS_SYS . I have added the navigation link but when i click on this link I get SAP initial screen ( easy access) instead of BP screen with an error 'Transaction execute is unknown'
I directly want to navigate to BP, can someone please help here or point me to some useful documentation. My mail id is [email protected]
Thanks

Hello Amit,
I think you made a mistake in your transaction launcher wizard.
If you want an external url to be displayed you should choose URL and not BOR method in the trans launch wizard. The error message 'Transaction execute is unknown' means that you have selected BOR object in the wizard. When selecting BOR object it will automatically look for a EXECUTE methode in the business object. (Or, if you do wanted to execute a BOR object you have picked the wrong one)
Run through the wizard again and make sure you have entered the correct values.
Reward points if useful,
Kind regards,
Joost

Multiple Transaction Type Specifications in Navigation Bar of IC web client

Hi Experts,
We created three transaction ZCBC-Customer Billing Complaints,
ZCRR-Customer Refund Request and Z_SC-Service Ticket which are the
copy of CRMC-Service Complaints with Transaction Category
'BUS2000120 Complaint'.
The IC Web Profile we created ZAGENT0001, Runtime profile:ZAGENT0001
and Navigation Bar Profile:ZAGENT0001, Business TransactionProfile:
ZBTP0001.
The Navigation entries are ZCUSTOMER_REFUND_REQUEST-Cust. Refund,
SERVICE_COMPLAINTS-Service Ticket, ZCBC0001-Cust. Bill. Complaint.
Problem: In the Business Transaction Profile only one default
transaction type (Complaint (BUS2000120)is allowed. But our
Business Process demands to choose 3 transactions for the same
Transaction Category where it is not supported by the Standard
functionality.
Advice us the possibility of choosing the 3 transactions
where the Agent is allowed to access all the three in the
IC Web through the navigation bar.
Please send me a solution for that as it is very urgent.
Thanks in advance
Koustav

Hi thirumala:
Could you send me the ic web client cook book, or do you have any guide on how to configure transaction launcher, in crm 5.0, i know it is a standar funciontality, but i have the following problem, i need to show some transactions like BP, in icwc, and then pass the transaction the confirmed bp number, i've already configured ITS, but i don't know wich are the following steps to do what i want, so could you give some guideance.
Thanks & Regards

To get the business transaction in IC Web client

Hi,
I added a lead transaction in IC Web Navigation bar..
Through trasaction launcher i have added that to navigation bar .
As per my knowledge i have done the correct functionality. But when i am trying to call the trasaction in the IC Web portal, i got one error i.e "Execution not possible, Data flow errors".
I am very new to IC Web, Just i have taken training on Ic Web..
To get the transactions in the IC web portal, Do we need to install any other componets?
As per my training knowledge i have done the entire functionality.
Any body can tell how can i call the transactions in IC Web Portal,
It is very urgent..
Regards,
Venu.

Hi manuel,
I have assigned the "CL_CRM_IC_ABOXSAMPLE_LEAD_PRO" class in the Launch transaction.
But in the output, it is displaying that in display mode, even i could not be able search the lead transactions(PCUI transactions).
for my userid "SAP_PCC_IC_AGENT" role has been assigned
but didnt get the screen in edit mode.
When i click the "Lead" in the navigationbar, first it is showing the error that is
"Execution is not Posiible, Data flow error". when again i click on the same "Lead" link, then i am getting lead search screen that would be in display mode only.
could you help me on this issue, it is very urgent
Thanks in Advance,
Regards,
Venu

Could not Launch the Farm configuration wizard

I have installed SharePoint foundation 2010 on the Windows 2008 R2 Server with MSSql 2008 R2. The is not a domain controller and it is workgroup server.
Installation went through without any issues. Now I am facing problem in Launching Farm configuration wizard.
I am trying to launch the farm configuration wizard in two way
A.
Open internet explorer
Enter the sharepoint server address
Login with user name and password
In share Point central administrator web site, click on configuration wizard – it returns blank page.
B. Start - Programs - SharePoint 2010 Products - SharePoint 2010 Products Configuration Wizard
        In continue with configuration wizard.   After few steps of default values, it opens the internet explorer and ask for the user name and password.   After passing the user and password
credentials,
        System gives error as permission denied.
I have read lot of solutions for this issue and applied the same. Most the solutions suggested that the username should have some roles rights in sql and windows etc. I have given all possible rights to the user and trying to get this launching
wizard and there is no luck.
I would appreciate if you could help me to sort out this issues.
Thanks & Regards.
Noor.

Hi NoorulHuq,
Please try adding your shareadmin as farm administrator like ieDaddy said, and aslo here are two articles about the administrative and service accounts permission you can check,
http://technet.microsoft.com/en-us/library/ee662513(v=office.14).aspx
http://technet.microsoft.com/en-us/library/cc678863(v=office.14).aspx#Section2
Thanks
Daniel Yang
TechNet Community Support

Java Security Error while Launching the Application through JNLP

Hi!,
I have a problem in launching my Application through JNLP. It is giving the Error dialog as "Unable to lauch application" with the dialog title as "Java Security Error".
I don't know why this problem is coming but when I have reset my profile on my system & then I tried to launch the same application & I got success.
Can anyone suggest me what was the problem?
Pradeep Gupta

hi,
usually it is the web dynpro launch system that is causing the issue, OR there is a misconfiguration in the backend like the tasks are set up with com.sap/esslea in the backend and the xml file is referencing sap.com <SWITCH>/esslea and the dynpro is showing this as not deployed.
Regards
Sharanya Rajagopal

CRM Transaction Launcher- Launching transactions of remote server

Hi Experts,
While using CRM Transaction Launcher is it possible to launch transactions of a remote system (SAP ECC 6.0 Transaction: va01)
Is it possible by giving the Logical System option in the Transaction Launche wizard as that of the ECC server??
Regards,
Litty Joseph.

Yes you can do it.
Please refer to :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true
Regards,
BJ

ICWC Error when launching transaction

Hello all,
Working with CRM 5.0, in interaction center web client I want to launch the CRM 'BP' transaction from navigation bar. I have configured Transaction Launcher and also Navigation Bar Profile.
But still when I click on the link at the left hand panel, I get the under stated error: -
404 Not Found
SAP J2EE Engine/7.00
The requested resource does not exist.
Details: Go to main page of this application!
I need some help!!
Thank you in advance
Pedro

Hi Pedro,
Make sure that you have specified the transaction type of the Launch Transaction to be appropriate (BOR Transaction if you want to launch a SAPGUI screen and not a URL Transaction).
Specify the transcation in Definition 1 field. and rest of the details correctly.
Let me know if you face any issues.
Best Regards,
Pavithra

Is it possible to launch Transaction Launcher in E-Commerce

Hi All,
Is it possible to launch transaction launcher in E-Commerce application like the way we have it in CRM Web ui( placing the logical link on navigation bar).Any pointers on this would be of great help.
Thanks,
Udaya

Thanks Peter for your response.
We are doing CRM IC Web client implementation where in we are bringing ECC VA01,VA02 Transactions on to web ui and providing this to agents.
In the same context, the client has requested for similar kind of links on E-Commerce application to look for ECC Sales order and other ECC Transactions.
Here the catch is we are not replicating the Transactional data in to CRM. Here we are having single crm instance connected to multiple back end(ECC) Systems.
Can you give us any SAP Reference link that tells us it is not possible to provide TL in E-Commerce application.
Thank you.
Thanks,
Udaya

Developing Master-Detail Through Wizard

When creating master detail form or a single form through Wizard ,it creates the form loads the data But if you try to modify or add a new row it gives following errors
JBO-26041 Failed to post data to database during update :.....
DAC-305 Dbaccess commit transaction failed .
Session1
JBO-26041 Failed to post data to database
Please Help

Sandeep,
Which version of JDeveloper are you using? Also, which version of the database are your tables on, and do they both have a primary key?
I know there were restrictions if your database is before 8.0, and your tables do not have primary keys.
Laura (JDev Product Management team)

Screen variants of ERP transactions at IC Web Client

Gurus,
I have created a variant of an standard transaction through transaction SHD0, we are calling this transaction at the IC web client, but we dont see the changes that we have made with transaction SHD0. Do you know if it is possible to take the screen variants when you call transaction at the IC Web client??? Or does it exits a transaction such as SHD0 on the IC Web client where I could build screen variants???
Rgs.

How do I build this enhancements??
Edited by: BPX PARTNERS on Oct 13, 2008 1:29 PM

Launching Transaction in through wizard in IC Web client

Similar Messages

Maybe you are looking for