Launchpad Folder Names

I can't rename one of the folders that I made in Launchpad after updating to 10.8, does anyone else have this problem? And, if so, how do you change the name? Before I switched over to ML, I was able to just open the folder, click on the name and then change it to whatever I wanted, now the folder I made, just says, "untitled." I've searched everywhere online on how to change it, and everything says to just open the folder, click the name, and then change it. =(
Thanks in advance for info.

I can testify that those instructions do work some of the time.

Similar Messages

How to use FPM event in Launchpad Folder

Hello Experts,
We have a requirement in which we want to navigate to the Service on clicking the folder name of the launchpad. As this folder is going to have only one service inside it , it does not make any sense to go inside the folder and then access the service by clicking on the service link.
Do you have any suggestions how we can do this.
I was expecting that we can use the 'FPM Event ID' of the Launchpad folder for this , but now sure how to use it.
Please let me know how we can do this , and if this can be done by 'FPM Event ID' how to do that.
Attached is image about the 'FPM Even ID' which i think i can use.
Thanks
Amol

check this document on Actions configurations in Launchpad
https://help.sap.com/erp_hcm_ias_2013_01/helpdata/en/5f/b1aa2dcdd54783b6ee557ce1abcb8e/content.htm?frameset=/en/63/61982…

How to display the folder name in a webi report at infoview

Hi all,
Suppose I have a report named "Test_Report" at location Public folder > Test_Folder> Reports_Folder
now I want to display the folder name "Test_Folder" using a variable in "Test_Report".
So that the variable will always display the corresponding folder name of "Test_Report" wherever the report resides.
Thanks in advance.

Folder name is located in the breadcrumb
remove your breadcrumb in your collectionrenderer of the layout set you are using.
Check the layout set you are using in your KM navigational iview.
Raghu

Split library, folder names and paths are in a mess. Need to get library all in one place on my storage drive and off my OS drive. In a fix!

Help appreciated on this one as I'm OK on my PC but far from a whizz. Done a little investigation and reading of https://discussions.apple.com/thread/5199195?start=0&tstart=0 but I just can't seem to get anywhere and end up with a very underpopulated iTunes.
To set the scene. Been using iTunes for many years and have had several PCs in this time and migrated the library over. Each time I have had a half hearted attempt at organising it all on 1 drive but it has obviously not gone to plan hence my split library and weird file/ folder paths. e.g.
for some reason my recently downloaded apps are stored in C:/users/mark/my music/itunes/mobile applications. I also have numerous itunes library files on this drive
my music is mainly stored on my storage drive B:/itunes music/music/music. On both drives I have mobile applications folders each with many apps in.
I have set my itunes media folder location to B:\iTunes Music\Music so have no idea why all my downloaded apps end up on the C:/, nor have I any idea why they appear in the library seing as the itunes media folder is set to B:/
I hope you can make heads or tails of this as I am even confusing myself as I type!
Help appreciated as every time I try and move stuff around I end up with a very depleted library and have to remember what I moved where to put it back!
Mark

So I right clicked to find the files and relink, and it did not work. The folder name disappeared.
It didn't disappear, it moved (because you told Lightroom to move it). It moved from the incorrect folder location, to the new folder location. Please look in the new folder, in whatever location it is in, not in the old folder and the old location, and you will find the photos.

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have had some that seem to go in but I can't find them. Where should I look?

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have also had some that seem to go in but I can't find them. If I try to add them again, I get a msg that they are already there. Where should I look?

It may be best to recreate the folder and the smart playlists from scratch.
tt2

The operation can't be completed because the item "folder name" is in use

Hi everyone,
I think this is quite a common issue but I don't find it really easy to find a solution.
I have a folder containing a folder and no files on a server that I cannot delete, for the life of me.
Whether I use shortcuts or drag the main folder to the bin, I have the same result "The operation can't be completed because the item "secondary folder name" is in use". This folder is just 1 year old so, obviously, I have restarted the computer more than once since then which means that the folder is NOT in use.
I'd like to clean up a bit and remove some stuff and this is bugging!
Hope someone can help me.
Thanks in advance!

If you don't have other backup data on it, reformatting external drive could solve the problem.

How to access a url in file receiver CC with space in the folder name?

Hi
PI 7.11 sp4:
In a file receiver channel I would like to send the message to this folder:
de-prod.dk\bu\something\something\PTI eventstanden\archive\"
But I get this error message:
"Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
When I log on the server on which Pi is running I can access the folder using the mentioned url including the ""s.
All suggestions would be highly appreciated!
MIkael

> But I get this error message:
>
> "Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
>
> My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
It comes from the "
Anything else but \ is treated as local folder under working directory of PI
> One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
It works for me just to copy the folder from Windows explorer into channel config. With space and without ".

How do I create a Launchpad folder for a single item?

Some items that came with a few apps have their own folder in Launchpad - "AppName (Other)".
Is there a way to create a folder in Launchpad with a single item?
I tried dragging one item to another and got a folder but as soon as I removed one of the items, the folder disappeared too.
Thanks in advance.
Best regards,
Barry
<Edited by Host>

Hi Shootist007,
Thanks for your response.
Trouble is, the app is already inside a folder. It came with another app and both are in their own folder, within the Applications folder.
At your suggestion, I even tried placing it within its own folder, within the app's folder, within the Applications folder. Still seeing two separate icons in Launchpad with no folder.
Both show up in Launchpad as separate things. What I'd like to do is have that secondary app in a Launchpad folder.
Hi Hpr3,
Thank you but those aren't email addresses in my signature - they're URLs. No fear of bots.
But thanks for the thought.
Best regards,
Barry
<Edited by Host>

How can I change my "Home directory" folder name?

Hello, everyone.
I was given a pre-owned MacBook Pro that's running OS 10.6.8. How can I change the name on the Home directory folder? I was able to change the Administrator Account settings, but the Home directory still shows the previous owner's name. It bothers me a bit, though, to see the previous owner's name still come up on the Home folder.
I came across the instruction listed below, but I can't get past step 4. It instructs me "rename it just like I would rename any folder." I can't seem to rename it, though. The cursor doesn't come up when I click on the folder name.
For Mac OS X v10.5 or later
Enable the root user.
Log in as root.
Navigate to the /Users folder.
Select the Home folder with the short name you want to change, and rename it just like you would rename any folder. Keep in mind that the shortname must be all lowercase, with no spaces, and only contain letters.
Use the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier) in System Preferences to create a new user with the Account name or Short Name that you used in the previous step.
Click OK when "A folder in the Users folder already has the name 'account name'. Would you like to use that folder as the Home folder for this user account?" appears. Note: This will correct the ownership of all files in the Home folder, and avoid permissions issues with the contents.
Choose Log Out from the Apple menu.
Log in as the newly created user. You should be able to access all of your original files (on the desktop, in Documents, and in the other folders of this Home).
After verifying that your data is as expected, you can delete the original user account via the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier).
Disable the root user.
Any help would be much appreciated.

Hi everyone,
I followed this https://discussions.apple.com/docs/DOC-3872
and got to the stage of having renamed my Home folder with the new name but the Home folder is STILL designated to the old name?
When I try and create a new user with the new name, I don't get asked if I'd like to use the existing name as Home folder, I get told I can't use the newname because it exists already - thats the end of it - no further options.
So to clarify - I now have oldname folder STILL assigned as Home folder. A newname folder with all my stuff in - apps, desktop, etc etc but this is just another user folder.
Interestingly at login stage, the oldname folder isn't an option. I think I've confused the system somewhere by titling things differently at some stage in an attempt to rename Home folder.
I'm running Mountain Lion (as of yesterday) and because I've kinda lost the use of my User folder as the Home folder, can't get to my Time Machine. I'm in trouble but I'm trying not to panic. Would appreciate any help!
Laurie

How to change the folder name of saved pictures

A problem I was facing with iPhoto 11.
In the older version of iPhoto everytime I imported photoes from my camera it used to save it in the iPhoto Library under the same exact name as the Event Name. Meaning, if I chose the event name to be "2013 - My Birthday Party" and hit import for the pictures I wanted it to import, the same exact even name I could search for under the iPhoto Library. There under "Orginial" folder I could easily look for "2013 - My Birthday Party" a folder name same as the event name.
Now in teh new version of iPhoto (iPhoto 11) first I've noticed that the folder "Original" now became "Masters" which is fine by me (who cares what teh name is, as long as it stores the pictures and can backup this folder with Time Machine). However, the second thing I realized and this is my problem, is that iPhoto stores all my imported photoes under folder and subfolders which indicates the date I imported the pictures from my camera and not the name of the event.
This is quite annoying, as all my photoes since 2008 are categorized by the event name I gave them and not by the month/day/date etc. as it is now.
My question is whether there is a way to enforce iPhoto to keep the old methodology of storing its photo while keeping the event name under the "Masters" folder?
And please do NOT ask me why I need to go directly to the Finder folder... it doesn't resolve my issue.
Thanks in advance!
N

You need the latest version of iPhoto for that export option - and you can't run that on 10.6.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Exporting does not remove images from the Library, it simply make a new file.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How to add folder name to document library view

Using Project Server 2010.
We have a set of standard folders on each of our project sites for Requirements, Development, Testing, etc. Currently, we display this library like you would see in File Explorer - you see a list of folders at the top, double-click on a folder
to drill down, etc.
I want to display these same documents as a straight list of all documents - not grouped into folders - but with the folder name displayed next to it (sort of like an attribute). I can create the list view easily by selecting the "Show all items
without folders" option in the view settings; however, the containing folder name is not available as a column name.
Is this possible?

I do not think there is an out of the box way to do this.
The immediate solution that comes to mind is using a workflow, that runs everytime a document is uploaded/item created, which may be too much for your scenario.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How can I get rid of directory path in front of my folder names in Folder listing in Library mode???

Im using the most recent version of Lightroom 5.3 (updated through CC - even though this has shown up on previous version) on Windows 7 and all the folders in my library are showing up with the directory path in front of my folder names. How can I get rid of this? I do not see any options in preferences to turn this off. I have also turned off preferences in Windows > Folder Options Control Panel "Display full Path in Title bar" option.
I have Lightroom on several computers and have set up preferences the same on each workstation, and this only shows up on one workstation.
Any help would be appreciated.
You can see from the image below how this is showing up.
Thanks
Thanks!

Click the little down arrow/+ symbol next the + - in the folders bar.

Single click folder name to expand folder in folder view?

As with prior versions, in [Windows] Explorer's main window, you can enable hovering to select and single clicking to expand the folder (but that is a pain in the rear when working with files). Windows XP folder view nicely allowed single clicking the folder name to expand the folder. Was that removed from Windows 7? Looks like the only way to expand a folder in folder view is to either click on the small plus sign or to double click on the folder name. Or is there a switch somewhere I am missing? Thanks.

"...Things are worse than that now... When you single click on a folder name in the folder list, the folder contents show in the right hand file window, as usual. But, when you use an arrow key to move to a folder name in the folder list, the folder
contents no longer show in the right hand file window...."
The option seems to be disabled. It is in Explorer>tools>folder options>navigation pane>"automatically expand to current folder" (win7 v6.1
Excluding this extremely useful feature really cripples Win7Explorer. I was spoiled by w9x and XP explorers. I am new to MS forums. Is there a moderated microsoft forum where this question can be posted, in the hope that a patch is produced?
I asked this in 2007 and I was answered <<WE DON'T GIVE A SH*T OF WHAT YOU WANT>>
See here:
http://connect.microsoft.com/WindowsServerFeedback/feedback/details/313066/explorer-should-expand-folder-tree-the-windows-xp-way

Event Receiver to get folder Names from List View Web Part

Hi,
We have a requirement i.e.
On one of the page,there are some folders on the list view web part.
Now through event receiver i should pick the folder names from list view web part and
update the same in the list.
If that names already exists in the list then we should leave without updating,if not we have to add folder name in the list.
Please share your ideas regarding the same.
Regards,
Naga Sudheer M
Thanks & Regards, Sudheer

Hello,
LVWP is just for displaying content of site so you need to associate your event receiver with actual list/library. You can create ItemAdded event receiver to check existing folder and create new if not existing. "sk2014" links are good to start.
http://sharepoint.stackexchange.com/questions/59788/change-name-in-itemadding-event-receiver-or-create-a-new-item
Let us know in case any doubt
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to get the folder name of selected subitem in tree structure?

Hi All,
           I created a tree structure like below.
         ->Folder1-- 1
                          2
                          3
        ->Folder2-----1
                           2
                           3
                i.e i have two folders & each folder having the values like above.Now i want to perform some action by clicking on the any of the values.Suppose if i click value 2,i want to do some action.the actions need to perform is varies from floder to to folder.
        So How can i get the folder name of clicked Value?
Regards,
Ravi

Hi Kumar ,
the below code should help you.
Register the below action for the leaf node for which u need the subfolder's name above it.
Worked fine in my system ...hope it does in ur scenario too
method ONACTIONGET_PATH .
data : lr_element TYPE REF TO if_wd_context_element,
         lr_node TYPE REF TO if_wd_context_node,
         ls_path type string,
         ls_path_node TYPE string,
         lt_string type TABLE OF string,
         l_lines type i,
         l_lines_1 TYPE i.
lr_element = wdevent->get_context_element( 'CONTEXT_ELEMENT' ).
**-> getting the path of the node/leaf
*which u had clicked and from that getting the node above it
ls_path = lr_element->get_path( ).
SPLIT ls_path at '.' into table lt_string.
-> remove the first 2 entries as they will contain the view name
DELETE lt_string FROM 1 to 2.
l_lines = LINES( lt_String ).
l_lines_1 = l_lines - 1.
-> remove the last 2 entries as they will contain the element in the path
DELETE lt_string from l_lines_1 to l_lines.
LOOP AT lt_string into ls_path.
    CONCATENATE LINES OF LT_STRING into ls_path_node SEPARATED BY '.'.
ENDLOOP.
**-> getting access to the node above the leaf element
LR_NODE = WD_CONTEXT->PATH_GET_NODE( path = ls_path_node ).
lr_element = lr_node->get_element( ).
**-> Getting the name of the folder...
*here path is the attribute in my context which stores the name of the folder
lr_element->get_attribute( EXPORTING name = 'PATH' IMPORTING value = ls_path ).
endmethod.

Launchpad Folder Names

Similar Messages

Maybe you are looking for