Layer 0 exceeds max when formatting?

Please help. I don't know DVD studio pro so well, but I am trying to burn a DVD with a lot of menus and I get this message popping up:
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
What do I need to do?
;-(

Welcone to the Boards
It sounds like you have set up a Dual Layer project (maybe inadvertantly) based on the amount of material. You can try to reencode assets so it fits on a DVD 5 or you can make a DL DVD. If there is a DL there are certain rules, including that there needs to be a marker at a proper break point and Layer 0 and Layer 1 have certain conditions.
If you find the proper layer break you should be fine
http://discussions.apple.com/search!default.jspa?objID=f952

Similar Messages

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Layer 0 Exceeds max size

Looking for solution - FCP 7 to Compressor 3.5.1
Origination - Canon XHA1
Keep getting error below:
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Layer 0 exceeds the max layer

When I try formatting a dvd I get the message: Layer 0 exceeds the max layer size allowed please choose a suitable marker location that will support this condition.
I brought in a 2 hour and 45 minute vcr video and added chapter markers. Does this simply mean the size is too big or what is it looking for?
Thank You

DUAL LAYER BREAK POINTS
Basically when burning a DL disc there needs to be something called a "break point" which is effectively a marker at what is considered a "permissable" spot for a break point. The requirements for break points have certain conditions (Layers cannot exceed certain sizes, Layer 0 needs to be larger than Layer 1 etc.) If there is not a marker that meets these conditions, then you will get various error messages.
1.) In a DL disc Layer 0 needs to be larger than Layer 1
2.) A marker needs to be placed as a Layer Break in the project to indicate the layers.
3.) You can start by assuming the marker will be right around the 1/2 point of the disc (give or take)
4.) Find the place which is about 1/2 way and put a few markers in there
5.) Build the DVD to the hard drive then select format. If there is a suitable layer break marker it will be black otherwise it will be gray.
Look [over here|http://dvdstepbystep.com/break.php] has generally the same info and some links for things to look at.
and [this thread|http://discussions.apple.com/message.jspa?messageID=11256039#11256039]

Problem in Rolling to new a log file only when it exceeds max size (Log4net library)

Hello,
I am using log4net library to create log files.
My requirement is roll to a new log file with name appended with timestamp only when file size exceeds max size (file name ex: log_2014_12_11_12:34:45 etc).
My config is as follow
<appender name="LogFileAppender"
type="log4net.Appender.RollingFileAppender" >
<param name="File" value="logging\log.txt" />
<param name="AppendToFile" value="true" />
<rollingStyle value="Size" />
<maxSizeRollBackups value="2" />
<maximumFileSize value="2MB" />
<staticLogFileName value="true" />
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<layout type="log4net.Layout.PatternLayout">
<param name="ConversionPattern"
value="%-5p%d{yyyy-MM-dd hh:mm:ss} – %m%n" />
<conversionPattern
value="%newline%newline%date %newline%logger
[%property{NDC}] %newline>> %message%newline" />
</layout>
</appender>
Issue is date time is not appending to file name.
But if i set "Rolling style" as "Date or composite", file name gets appended with timestamp, but new file gets created before reaching max file size.(Because file gets created whenever date time changes, which i dont want) .
Please help me in solving this issue?
Thanks

Hello,
I'd ask the logfornet people: http://logging.apache.org/log4net/
Or search on codeproject - there may be some tutorials that would help you.
http://www.codeproject.com/Articles/140911/log-net-Tutorial
http://www.codeproject.com/Articles/14819/How-to-use-log-net
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Formatting was not successful. Layer 0 exceeds the maximum layer size

I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Can anyone help me out with this?
The following info was in the build log,
Starting DVD Build MUSICVIDEOMIXTAPE...
Compiler Initializing...
Precompiling Project MUSICVIDEOMIXTAPE
Compiling VMG Information...
Created 8 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Generating Transition: VTSM #01, VOB #1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
2 VTSs and 2 Titles will be created...
Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (d12 vid mix tape)...
Writing VTS020.VOB
Muxing VTS021.VOB
Done.
Linking VMG...
Linking VTS#1...
Linking VTS#2...
Writing VTS#1...
Writing VTS#2...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html

When I try to download iTunes, I recieve the message: "69.31.21.67:80- 10.239.97.15:53037 Download request is dropped due to exceeding max content size." Please help!

I cannot download any version of iTunes to my Windows Vista laptop. When I try, I recieve the message "69.31.21.67:80->10.239.97.15:53037 Download request is dropped due to exceeding max content size." Please help me so I can start using my new iPad!! Thank you!

Acrobat Support

HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
please email me back at [email protected]
Thanks so much
G5 Mac OS X (10.4.6)

Hey timeline
welcome to the apple boards...
ill give you the easy fix, although i would recommend the proper fix.
first, build your project on any of your drives so you can see your audio and video TS folders.
once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
hope that helps
Mikey M.

Hyp FR Error: 5200 : Error executing query. Exceed max row number 100000

Hi,
I am getting the error
5200 : Error executing query. Exceed max row number 100000
when I run the report on Financial Reporting. It gives the same error when run on Workspace.
Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
-- Adi
Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
Edited by: Aditya26 on Apr 11, 2012 9:02 AM

Hi Adi,
This is from My Oracle Support:
How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Solution
Applies to:
Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
Information in this document applies to any platform.
Goal
How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
Solution
1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
If you are running extremely large reports, you can increase the limit.
2.Restart Reporting and Analysis services.
For version 11.1.2.x
The path of ADM.properties file in these versions should be located under:
%Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
Cheers,
Mehmet

REP-56055: Exceed max connections allowed: 20

I have a application server and a db server.I run several reports,then the error message comes up.So I reboot the app server but the problem isn't fixed.
How to solve the problem?

When you have a problem like this it is useful to search the forum for the error message.
See: REP-56055: Exceed max connections allowed: 20
A quick goggle search found:
http://www.rittman.net/archives/000514.html

Burn Problem with a 4GB project: "Layer 0 Exceeds"

First off this is not the usual Dual-Layer problem. I know all about Layers how they work and how to make them. Although the error I receive deals with DL my projects or nowhere near that size.
I recently had DVDSP 4 crash on me. Ever since than its been running really funny. The biggest issue I am having is that it won't allow me to burn a DVD 5. My projects usually range from 2.5GB - 4.5GB. Let me also say that DVDSP 4's Disc meter has always been a pretty good gauge as far as I am concerned. It's always been right on telling me if something was going to fit on a DVD 5 or 9.
My problem ever since the crash is that DVDSP will not allow me to burn a DVD unless the project is under 3.5GB. I have tried everything, including a Full Re-install of DVDSP. Every time I try to burn a DVD I get the following error message:
+"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."+
My latest project is dealing with a 4.4Gb (according to Meter) 4.32GB actually. It is impossible for me to burn a DVD because of the error message above. I can however run the project out on a Single DLT. How does that work?
Has anyone else had a problem like this? Does anyone have an suggestions?
I have checked all the obvious settings in DVDSP and all seem to be right. I can't figure this one out.

I've never had a problem burning a 4.4 disc on a DVD 5 until now. I actually went back to some of my previous project that were a DVD-5 and I am unable to burn those now too. Everything really got screwed up on that last Crash.
Yes. I am using AC3 audio.
I have not yet tried burning my DVD project through another program...but thats a good idea.
I usually burn a DVD and DLT for the replicators...but I know they prefer a DLT. What I find odd about all of this is that I am able to run out a DLT with no errors at all. It only seems to be on the DVD side.
In regards to the uninstall...I used the exact program. I am actually in the process of doing a full reinstall of FCP2 Suite.
I'll let you know how it goes. Thanks for the suggestions.
Mike A.

First DL Burn - Error Layer 0 exceeds maximun layer size?

The entire DVD size is 6.1G. I have 4 menu's. Don't understnand this message. "Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."

What is happening is that there needs to be a marker in the project located where the layer break should occur.
The first Layer (Layer 0) needs to be larger than the second Layer (Layer 1)
Basically it means DVD SP cannot find a proper break point where it will comply with the above
Take a look at pg 576-580 or so in the PDF, goes into more detail (cannot be larger than 3.9 binary, see pg 578)

Layer 0 exceeds the maximum layer size allowed.

I am getting the following message and do not know what to change in my pref.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

No change in preferences, it is something you need to make a marker for on a DL Disc
On the layer break some threads below - basically there needs to be a marker somewhere so that is around 1/2 way give or take Take a look at the PDF pages 576-586 for some of the details.
http://discussions.apple.com/thread.jspa?messageID=4274608&#4274608
http://discussions.apple.com/thread.jspa?messageID=4470720&#4470720
http://discussions.apple.com/thread.jspa?messageID=4309773&#4309773

User Exceeded Max Sessions

User trying to use DUN are getting the error msg of User exceeded max session going into ACS, I cant find any info about and initial log for that day never mind multiple ones. Max session is set to one in the group settings; I have 6 PRI AS5300, PIX 515 and a 3005 concentrator. ACS and radius were recently rebooted with no luck. Any help would be greatly appreciated.

Is this ACS for Unix, if yes then please try setting the MaxSessions parameter to a higher value.
MaxSessions parameter specifies the number of concurrent logins allowed, so if the user, or group is entitled to more sessions, change the user's or group's profile to allow more sessions.
Thanks
Raji

Budget exceeded BP604 (when create Invoice)

Hi All,
User got an error message budget exceeded BP604 when create invoice. How can i know what the configuration to check why system check budget( Investment management). I tried to check the configuration in SPRO (Define tolerance limit for availability control) shows that budget profile use ++ which are : (no invoice checking) but in actual it checks budget.
++     All activity groups
00     Purchase requisition
01     Purchase order
02     Orders for project
03     Goods issue
04     Financial accounting document
05     CO document
06     Budgeting
07     Funds reservation
08     Fixed prices in project
09     Payroll
Many thanks in advance.
Nies

Business transaction group 04 (Financial accounting document) contains below transactions:
G/L account posting
FI invoice parking
Invoice verification
Goods receipt for the order
Cash budget management
Payment transfer
Down payment posting
Inventory difference
Regards
Sreenivas

Layer 0 exceeds max when formatting?

Similar Messages

Maybe you are looking for