Layer Actions Missing OK, Cancel, Etc.

Snow Leopard 10.6.1 on 2.5 Ghz Intel MacBook Pro.
Using layers, for example, Curve Adjustment, the OK, Cancel, Etc., buttons are missing.
I call tech support. Got India Central ;(, and was promised I would receive a URL for instructions to de-install, and reinstall CS4 Extended.
Well, that's been 12 hours ago. I know they sure are busy over there ;>), but does someone here have suggestions as to where that URL might be on Adobe's site?
ADOBE TECH SUPPORT HAS BECOME AN ABSOLUTE JOKE!!!!
End of rant.

The CS4 interface has a different approach to adjustment layers. In CS3, a dialogue box popped up and you needed the OK, Cancel, etc. buttons to get rid of the box. In CS4, it's not a dialogue box, it's a panel so you don't need to OK anything, the adjustments will apply as you work and you can move in and out of the image and panel as you need to. There's also a reset icon on the bottom of the panel. So, the things that appear to be missing, are just, well, gone for good. They are there when you go through the image>adjustment menu, but then your back in a dialogue box.

Similar Messages

I'm trying to make a AUTO slide show. I can select all the other actions like mouse clicks etc. but

I'm trying to make a AUTO slide show. I can select all the other actions like mouse clicks etc. but ON load will not work.
PLEASE HELP>
I do not know how to reload/reinstall "ADOBE" golive default actions. I'm using golive cs mac version and "ON LOAD" action. I can't select it when creating a golive action.....It converts it or something to a rollover..
How can I reistall basic adobe actions???
Is it a bug???
Is it a known issue???
Do I need something??
Am I missing something???
Thanks a bunch..
Kev

In article <[email protected]>,
[email protected] wrote:
> I do not know how to insert the auto slideshowaction as a head action item.
> The steps.
> Can you explain how to do it?
I just remembered I have a couple of screen snaps online to explain how
it's done:
1. place your base image and name it in the inspector
2. from the smart objects palette grab the head action item, the one
with a question mark in its upper, green half - the 2nd one from the
left. Drop that into the pages head section.
3. in the inspector set the action to run OnLoad and select the base
image that you named in the first step and set the other parameters.
This was done in the days of GL6, but not much had changed in GL CS.
Anyway you might also refer to GL's online help. It describes how to set
up all the actions that ship with GL.
Cheers Martin

Attribute "action" missing or wrong XML structure

Does anyone know what's the problem of below XML format ?   I want to triggle a stored procedure in AS/400 from SAPXI after receiving records. But the message "No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)" is found
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_t1 xmlns:ns0="http://cxx.xxx.hk/zxxxpxx/jdbc">
   <storedProcedurename>
      <action>EXECUTE</action>
      <table>LIBRARY.PROCNAME</table>
      <TRNX_TYPE IsInput="true" TYPE="CHAR">content 1</TRNX_TYPE>
      <TRNX_NO IsInput="true" TYPE="CHAR">content 2</TRNX_NO>
   </storedProcedurename>
</ns0:MT_t1>

Dear all,
Thanks for your help and now I can submit a stored procedure via SAP XI by using below XML format. I try to define two output parameters at the end of this XML. How to get the return value ? Should I define a response message type ? and what is the XML format ?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SYN_t1 xmlns:ns0="http://xxx.xxu.hk/zxxxpgs/jdbc">
   <update>
      <storedProcedurename action="EXECUTE">
         <table>LIBRARY.PANSYTEST</table>
         <TRNX_TYPE IsInput="TRUE" TYPE="CHAR">4</TRNX_TYPE>
         <TRNX_NO IsInput="TRUE" TYPE="CHAR">2</TRNX_NO>
         <ACTIN IsInput="TRUE" TYPE="CHAR">23</ACTIN>
         <RCRT_DATM IsInput="TRUE" TYPE="CHAR">3</RCRT_DATM>
         <RCRT_USER IsInput="TRUE" TYPE="CHAR">8</RCRT_USER>
         <STUD_ID IsInput="TRUE" TYPE="CHAR">8</STUD_ID>
         <AWD_SEQ IsInput="TRUE" TYPE="CHAR">6899</AWD_SEQ>
         <AW_PSDATE IsInput="TRUE" TYPE="CHAR">89</AW_PSDATE>
         <AW_PEDATE IsInput="TRUE" TYPE="CHAR">99</AW_PEDATE>
         <OUT_TRNX_TYPE IsOutput="TRUE" TYPE="CHAR">4</OUT_TRNX_TYPE>
         <OUT_TRNX_NO IsOutput="TRUE" TYPE="CHAR">2</OUT_TRNX_NO>
      </storedProcedurename>
   </update>
</ns0:MT_SYN_t1>

JDBC receiver report error message: attribute action missing

Hello Colleagues,
I am working on a scenario:
SAP ECC>XI proxy>XI server>JDBC adapter>oracle database.
SAP ECC is sending a request(SQL query) to get the result from DB.
The payload is
==========================================================================
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_B1_MES_GETMAT_IN xmlns:ns1="http://boe.com.cn/b1/cim">
- <root>
- <stmt>
- <Query action="SQL_QUERY">
<access>SELECT productspecname AS MATNR, productiontype AS DISGR, SUBSTR(factoryname,1,1) AS SHOP FROM PRODUCTSPEC WHERE activestate = 'Active'</access>
</Query>
</stmt>
</root>
</ns1:MT_B1_MES_GETMAT_IN>
============================================================================
As you might already seen, the action attribute is there, but i always get the error log:
Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
I searched for the threads in forum but it seems, people get the same error always due to the wrong XML document.
but i check my xml, it looks right. why still get the "action attribute missing" error...
Best regards, Charlie Cai

   <?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_B1_MES_GETMAT_IN xmlns:ns1="http://boe.com.cn/b1/cim">
- <root>
- <stmt>
- <Query action="SQL_QUERY">
   <access>SELECT productspecname AS MATNR, productiontype AS DISGR, SUBSTR(factoryname,1,1) AS SHOP FROM PRODUCTSPEC WHERE activestate = 'Active'</access>
   </Query>
   </stmt>
   </root>
   </ns1:MT_B1_MES_GETMAT_IN>
In your query, are you executing Select Statement ?
For Target JDBC, you can Insert data in table, Update Data in table & Execute Stored Procedures from PI System.
using Actions
INSERT
UPDATE
EXECUTE.
Change your scenario Action as per your requirement.
No idea for ACTION = SQL_QUERY.

**Error** Scene 1, Layer 'actions', Frame 1, Line 664: 1087: Syntax error: extra characters found after end of program.

Scene 1, Layer 'actions', Frame 1, Line 664: 1087: Syntax
error: extra characters found after end of program.
I am new to importing classes and I have been practicing
making a photo gallery. I am stuck and I want to know if someone
can help me with the error I am getting.
If it is convenient, you can download and test my .zip at
www.dhtmlguy.freeservers.com
Thanks in advance!

thanks...the small stuff gets me every time.

Cs5 on a new pc transferring actions/scripts/pre-sets etc?

I have just upgraded computers and re-installed CS5 on it.
Is it possible to cut and paste actions/scripts/pre-sets etc from old pc to new one.
If so how/where would I find them?
Thank you
Tim

each program has its own location for its settings. eg, ps: http://helpx.adobe.com/photoshop/kb/preference-file-functions-names-locations.html

Photoshop CC 2014 skew layer action issue

Hello,
I have a set of actions from previous version of PSD (CS6 > CC) which includes skewing a layer and placing it in an exact position. Worked like a charm.
Now, I have upgraded to CC 2014 and these actions are useless...
E.g. - what one action did in previous versions of PSD:
two documents open in PSD:
1) take open document > flatten > image size to width 1000px keep ascpect ratio > select all > Ctrl+C
2) select previous documet > paste > move > free transform including skew
Result in previous versions of PSD was exactly the same. In PSD CC 2014 the skew is different (incorrect) and the placement of the transformed layer is wrong.
Tried to create the same action in the new PSD CC 2014 and the result was the same. Even more - the new transformed layer is placed as if chaotically depending on the zoom of the document it transformed in.
Any suggestions, please? I am quite desperate - I need to process large numbers of files this way...
THANKS VERY MUCH IN ADVANCE FOR ANY HELP
Tom
Correct result from previous versions of PSD:
Error result in PSD CC 2014:

If your are replacing the wall image with image files that are the same size an resolution. Have you tried placing the image in the PSD file as a smart object layer, Then record the action to use replace smart object layer content. Rather then pasting in a new image layer and transforming the new layer. Since the problem you seem to have is the transform step is not working correctly. Recording transform steps can also be tricky. You need to have set Photoshop's ruler units so the step is recorded the way it need to be. Transforms can be recorded using absolut pixel values, relitive to document size in percentages and in relative units like inches which depends on the document DPI resolutio. If it is a CC 2014 bug you should report using this link Photoshop Family Customer Community

ChaRM: Some actions missing in the Correction Document?

Dear all:
I have followed all the tutorials about creating a charm, everything is fine but when handling the correction document I can never see in the action list the items "Logon to system" and "Complete development" (I can see al the other items though). Anyone has an idea about this? Where those actions come from?
Thank a lot in advance!!
Federico.

Hello Frederico,
These actions are PPF actions, they are assigned to an action profile and this action profile is assigned to the CRM transactions such as SDCR, SDHF, and so on. You can maintain that at SPPFCADM.
However, sometimes the basis PPF database tables are not completed updated during the activation of BC-set SOLMAN40_CHARM_BASICFUNC_001.
Our recommendation now is to reactivate the ChaRM BC-Sets, in order to recreate all entries missing. However, I have to remind you that if you have performed some customizing in ChaRM this will be overwritten.
So, if you agree with this statement, please reactivate the BC-Sets in this sequence:
SOLMAN40_CHARM_PROXYFACT_001
SOLMAN40_CHARM_BASICFUNC_001
SOLMAN40_CHARM_TRANSTYPE_SDMJ
Please check note 907768 that has informations about how to activate ChaRM BC-Sets.
Best Regards,
Fernando Rocha

Soap Action missing in the WSDL generated for Service Interface

Hi All,
I have modelled an interface in the ESR and have created the proxy in the back-end ECC6 system. It is basically an outside-in approach. I have generated a WSDL using the Wizard in the SPROXY transaction. But the WSDL does not have any SOAP Action. I tried to create a web-service for an existing BAPI. That WSDL also did not have any SOAP Action. Can you please let me know why the SOAP Action is missing? Is there any other way of generating the WSDL?
Regards,
Geetha

Hi Geetha,
Please try configuring the entire scenario in PI.
If you are using PI 7.1, You can see the WSDL by right clicking on Sender agreement. Please use SENDER SOAP Channel. In PI 7.0 you will have to generate WSDL manually.
Regards,
Vikas

SOAP Action missing in Axis adapter

Hi,
I am not able to send data to a Web Service using Axis Adapter (SOAP 1.2) and getting an error of "SOAP Action is missing". Can see that SOAP action is missing in the SOAP message sent to Web Service. Communication channel is configured with SOAP Action.
Am on PI 7.10 SP6.
Any help is appreciated!!
Thanks
Kiran

Hello,
I tink you are using receiver SOAP Communication channel... Ask your client to provide the same... because.... your message will be processed at receiver side by using SOAP Action at receiver side...
SOAP action is mandatory for SOAP Receiver communication channels...
Thnx
Subbu

Some clients do not get software deployment, actions missing after OSD

We have Win7 SP1 x64 rollout going on from XP, a refresh scanario on ConfMgr 2012 SP1 non-CU site server. Our testing phase went fine with 100% success, but just before starting rolling, I approved updates November 2013 - January 2014 and did too
quick test. So there was lot of issues, after that I had to disable those patches during OSD and let them be deployed via Software Center, after OSD.
Still, about 10% clients comes out with missing actions in ConfMgr client, or/and do not get desktop deployment software. We have 2 additional apps comming up to to user profile, so after first logon these 2 apps gets installed. And in 10% this does not
happend.
- bounderies are fine, client location .log is clear.
- usually ccmsetup /install -> reboot -> ccmsetup install with MP paraments solves the problem, but not always. It´s also too slow solution
- I noticed, that in this enviroment, the 3rd scheduled task called "Configuration Manager Maintenance" is missing. I only see Idle and health eval. I had similar case in my lab with R2, and that maintanced task fixed my client with missing in
10 minutes!
- our guys who installs Computers, claim that this behavior is seen more with refresh TS rather than with PXE boot - new machine scannario.
- there are additional role based applications with required deployments, and they do not appear, even if the actions are fixed
Any hints what to do? I would like to avoid upgrading site server to R2 or updating it during active rollout.

Skywalker - I agree, solving Software Updates issues in OSD is a challenge. It´s shooting ducks to figure what KB fix breakes the OSD hook. Recapturing .wim in a middle of a rollout is not the option here, but you´re right. In other side,
if patches breakes OSD during deployment and install software update step, it´s no guarantee the capture will solve your problems. I will check the registery, didn´t know that before. I have my suspesious, that TS might not finnish properly, though there is
no errors. MDT brings lot of more logs and status messages, so solving this isn´t easy.
Torsten - sometimes, waiting for hours, rebooting, killing and restarting prosess isn´t enough. Even if all actions are precent. Also, in a real life users can´t wait for hours. I´m very keen do understand, why there is no 3rd schduled task
of maintance.

Calendar Crashes, iPhoto 6.0.3, and Missing Photos, Books, etc.

Last week I was creating a calender in iPhoto 6.0.2. It crashed twice while I was working on it. I submitted the crash logs to Apple and went on working with the calendar. Everything seemed fine.
Last night I upgraded to iPhoto 6.0.3 via Software Update. I checked permissions afterwards, then launched iPhoto 6.0.3 to work on my calendar. ALL of my photos since December 2004 were missing and I also had no books, albums, or calendars in the left side pane. I tried rebuilding the library and nothing changed. I have not yet tried to "recover" lost images.
I'm not sure if the iPhoto 6.0.2 calendar crash did this or the iPhoto 6.0.3 update, or the combination of the two. Does anyone have any ideas on how to get back all of this information? From what I've gathered, it looks like I should try iPhoto Library Manager. That seems to help some people. At the very least I hope to get all my Film Rolls back, but I would like all the other stuff as well.
Yes, I should have a more recent backup than I do, but Apple also needs to make the iPhoto Library data files more robust so it's easier to rebuild this information!

That did indeed recover all my "missing" photos. I guess there just isn't anyway to recover albums, calendards, greeting cards, slideshows, etc. Is that true?
I think I will revert back to my last backup and manually add the 10 or so rolls that I have taken since then. At least that way the only thing I lose is the calendar I was working on during the crash in iPhoto 6.0.2. I also plan on filing a bug on iPhoto with the crash log and the information about it corrupting my iPhoto Library. If iPhoto Library Manager can recover all my photos, then iPhoto itself should definitely be able to!
One other oddity I noticed was the iPhoto Library Manager would say it was importing Film Roll "Joss's Birthday", but then it would NOT actually use that as the name of the Film Roll in the rebuilt library. I figured since it obviously saw the name, it should use it. Maybe I had the preferences configured wrong.
Power Mac G5 Dual 2 GHz Mac OS X (10.4.6)

Oracle DB View in Repository physical layer. Missing grant.

Hello,
I have a table and a view in my Oracle DB Schema and in my connection pool (obi repository - phyiscal layer).
When I use OBI Answers I can see the data in the table, so all the connection information
is correct.
However, when I want to see the data in the view using OBI Answers, I see the following error:
OPR4ONWY:U9IM8TAC:OI2DL65P ORA-00942: table or view does not exist
I have the strong suspicion that the technical user that is used to connect to the Oracle DB
does not have rights to the schema from which the view selects. In other words, the view
uses data from other schemas and the grants are missing. Thats my idea, why the data of the view is not displayed
but in the same connection pool the data in the table is displayed fine.
If my suspicion is right, I wonder what is the user that I should be granting to?
The view works fine when I check it with SQLDeveloper.
Thanks for any help.

The base tables of the aliases are correct. but the problem is not between alias or not.
its between Oracle db view vs. table and the views are also specified as "physical table".
Instead of the "phyiscal table" I changed the table type to selection and
wrote a query that is very very similar to what is in the view:
Oracle SQL view query
SELECT 997 AS "ID",
2 AS "LOADID",
SYSTIMESTAMP AS "TIME_STAMP",
NULL AS "TYPOF",
'2' AS "KEYVAL",
2 AS "SORTING",
'01.03.2012' AS "DESCRI"
FROM DUAL
--Data types in OBI repository
Name Typ Length
ID Numeric
DESCRI Varchar 300
LOADID Numeric
SORTING Numeric
KEYVAL Varchar 20
TYPOF Varchar 20
TIME_STAMP Timestamp
with the above query I also get the incorrect data type error.
I have a strong feeling it might be something with the time stamps.
even if the data is the same in the tables.

SQL Developer 3.0.03 Code Editor Save Actions missing from menu

I had just gotten a new notebook and installed latest version of Oracle SQL Developer 3.0.03. Seems Auto Save settings are enabled by default. I am prompted each time I switch off from SQL Dev to another app or window to Save the SQL code I am testing. I don't want to necessarily save it each time so I have to save or cancel each time I switch windows. I checked the documentation Help menu and it directed me to the Code Editor section > Save Actions menu to adjust settings. This category does not exist (or is not visible for me) to check settings and make changes. I am Admin on machine and installer of the app so not sure if it is some security setting I am not aware of. Or is this the wrong Help documentation for this version?
This version is much different from older version I was using. Any thougts on this before I remove and re-install an older version?
Thanks,
Joe

many thanks for your reply jim. i see the settings for 'prompt for save file on close'. this is checked by default and that is fine. if i have a sql worksheet open, as soon as i switch to another window (i.e. visual studio app), i get prompted to save the file. that is the strange behavior i've been seeing with this version.
i will try to update to 3.0.04 and see if that resolves. i appreciate your help.

Missing files from /etc/certificates

Hi, I have a certificate in my keychain for which I miss the .cert.pem, chain.pem, concat.pem and key.pem files in /etc/certificates.
This results in a problem in server.app as I can't configure all my web-sites correctly and server.app won't write out the correct config files.
Any idea how I can create the four files?

So, I solve this issue and one more. I really can't believe nor understand why Apple is unable to create a server.app that can handle the simpelst things. What trainees are working on it?
You need two fixes:
1. http://support.apple.com/kb/TS4539 (OS X Server: Saving a certificate identity to the system keychain does not work with Server services)
The importan part is, that you need (!!) to reboot your machine. Only than the files are generated. I don't understand what's so hard to generate them right when adding the certificate but that's an other story.
If you than try to use your now finally available certificate, you are hit by this problem:
2. https://discussions.apple.com/thread/4266473?start=0&tstart=0 (Strange issue with Dovecot (err 89))
And yes, that's because server.app comments out the SSL stuff in the dovecot config. Which of course makes a lot of sense if you want to use SSL. The bad sideeffect is, that dovecot won't startup with this wrong config.
Enough hours lost by this Apple botch...

Layer Actions Missing OK, Cancel, Etc.

Similar Messages

Maybe you are looking for