Layers don't display on IE6

Dear Sirs
at this address
http://spamo.altervista.org/SitoMarmiLaBella/lavorazioni.htm
I want to display 2 pictures clicking on the words "prima"
and "dopo" (in the middle of the page). I positioned the pictures
in two hidden layers. Is there anything wrong in my code? Why only
IE6 doesn't work fine on it?
THX

Try changing this -
<div align="center"><a href="javascript:;"
onclick="P7_ShowPic('foto_lavorazioni/lastredarisanare.jpg','P7ShowPL1')">prima
to this -
<div align="center"><a href="#"
onclick="P7_ShowPic('foto_lavorazioni/lastredarisanare.jpg','P7ShowPL1');return
false">prima
Note the several changes I have made.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Prajnaparamita" <[email protected]> wrote
in message
news:e3sp2s$g2b$[email protected]..
> Sorry Murray,
> but this time your solution doesn't work as you can see
at this address
> too:
>
http://www.marmilabella.com/lavorazioni.htm
> The client noticed it immediately, so he e-mailed and
phoned to me, that I
> had
> to wait 15 days for his correction to my text to insert
in the site ;-)
> Anyway THX A LOT FOR YOUR HELP!!!!!!
>

Similar Messages

  • Some graphs don't display in OEM Grid Control 10gR5 (10.2.0.5)

    A number of the performance graphs (e.g. Top Activity) don't display i.e. there is nothing but if if you right-click in the empty area you get a small pull down with Print, Settings, About Adobde Flash 10.
    This has all happend after upgrading to 10.2.0.5. OMS and client environment is:
    Windows 2003 SP2 (32 bit), IE 6 with Flash ActiveX 10, Flash Player 10.
    Anyone got any ideas or anyone got it working fine.
    Thanks.

    Windows Server 2008 OEM 11g Performance graphs do not display.
    Click OEM Performance Tab and IE7 information bar displays message:
    "Your security setting do not allow websites to use ActiveX controls installed on your computer. This page may not display correctly."
    Workaround: Disable Internet Explorer Enhanced Security Configuration in Windows Server 2008
    Unlike with previous versions of Windows Server in which you could disable Internet Explorer Enhanced Security Configuration by removing the component in Add/Remove Programs, Windows Components
    the Windows Server 2008 implementation of Internet Explorer Enhanced Security Configuration is configured through Server Manager.
    Select the root of the Service Manager navigation pane, and under the Server Summary click Configure IE ESC, which is part of the Security Information section.
    A dialog box appears, letting Internet Explorer Enhanced Security Configuration be enabled/disable separately for normal users and administrators.
    See YouTube video:
    http://www.youtube.com/watch?v=OO3PPN1olHY

  • Events added in iCal don't display in Google Calender

    I'm using my google address for iCal as I don't have a MobileMe account.
    Events added in Google Calender display in iCal, but events added to this account in iCal don't display in Google Calender. I have tried subscribing to my Google Calender in iCal, but the address isn't recognized by iCal.
    I have even tried deleting and re-adding my Google Calender, but still no joy.
    Are the calenders I am using in iCal and Google the same calender, or are they actually different calenders with the same username? Someone help me sync the **** calenders!

    Hi Ellyenne,
    Ellyenne wrote:
    It didn't help. 
    I want my iCal events from my HOME calendar to display in my google calendar. 
    I DO NOT want to move my iCal events to my google calendar.  I have way too many.  So, why won't my iCal events show up on my google calendar??  My google events show up on my iCal. It's a SYNC. They should be the same.
    I'm sorry my answer to Clint is not what you want.
    iCal and Google on their own do not do what you want.
    There are/were some third party add-ins that worked in the way you describe that were mainly developed before Google Calendar had CalDAV integration.
    Best wishes
    John M

  • Math fonts don't display in mail messages?

    For some reason when I receive a mail message with math - fractions, equations, etc. these characters don't display.  My husband has an iPhone 4 and this isn't a problem on his phone.  I am wondering how I can get these characters to display?
    Thanks

    Hi markatos
    Hi Rick Van Vliet
    I have the same problem, and I can also (only) underline text.
    Since upgrading to Tiger (10.4.8) from Panther 10.3.9, I have experienced a few daft functional problems, eg the 'Enter' key not working on the calculator (the standard one, not the Dashboard version). This turned out to be a '.plist' problem.
    Mail was marking all outgoing mail as 'Junk' ... '.plist' problem again.
    But I cannot see how to sort this one ... at the moment I am having to format text on a Stickie then paste it into a Mail message in order to do simple things like bold headings (I don't need any more than this really). So the 'Font' palette is working. Message format is set to 'Rich Text'.
    Any ideas anyone?
    Help will be appreciated.
    Thanks in advance.
    Paul

  • Word docs don't display fonts since upgrade to 10.6.

    Word docs don't display fonts since upgrade to 10.6.  Got this error message in Console:
    6/14/11 9:38:14 AM          [0x0-0x11011].com.microsoft.Word[140]          Tue Jun 14 09:38:14 Michael-2.local FontCacheTool[144] <Error>: ATSFontGetPostScriptName failed: error -984.

    Thanks but I searched and searched there.  Nothing listed that addresses this issue.  Am I the only person to upgrade to 10.6 and have a problem with seeing type in Word afterwards?  Does anyone understand what the error message means?

  • In Firefox 15.0.1, jpegs don't display in body of email, even in older saved emails that were originally o.k. Photos display fine in Explorer.

    jpeg photos sent to me in emails don't display -- just get a torn page type box. Prior emails saved in folders are also affected. If I forward the email to an email account in Explorer they work fine.

    Thanks, but I had already tried these Firefox suggestions. I don't think it is a Firefox problem after all, since even when I load my Yahoo email account in Explorer the images don't display. Interestingly enough, when I forward them to my husband's Yahoo account, or my Google account, the jpegs display fine. This appears to be a somewhat new problem, and only in MY Yahoo email account. I have not knowingly made any changes to it in the last few weeks. I've tried to find suggestions in Yahoo's site and in my service provider's site (AT&T). No luck.

  • My thumbnails don't display

    I had to restore my hard disk via Time Machine, and my iPhoto software doesn't work right.  When I open it, the thumbnails don't display.  If you double-click on a blank tile, the photo shows up.  How do I get my thumbnails re-connected.  I have already done a permissions fix and re-installed iLife '11.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails. You may need to repeat this three or four times in my experience.
    Regards
    TD

  • Previews don't display

    Aperture 3.2.2, MacBook Pro, 8 Gb ram. I keep my CR2 (Canon 60D) RAW photos in Aperture on an external usb 2 drive so my wife can view them from her "user" side of our computer. We are both "admin" users. I know the library can't be shared, so I turn Aperture off on my side before she logs into her user side to see the pics, and vice versa. Yesterday I uploaded some pics to Aperture from my user side and they all appeared as expected in the library. All thumbnails, and full size pics show up fine. When I turn Aperture off on my side, and login to my wife's user side to view the pics the thumbnails don't display in the browser. The pictures are represented by empty placeholders. If I double click on an empty (thumbnail) placeholder, the picture opens and can be seen and edited as usual. Upon closing the image, the thumbnails still don't show.
    When I upload images from my wife's user side, everything shows up fine on her side, as expected, thumbnails and all. But when I switch to my side, the thumbnails don't display, but double clicking on the empty thumbnail placeholder opens the image for viewing or editing. The problem files are all from a single day/event. Pictures shot on later date, but on the same SD card upload and display correctly on both user's sides.
    I have over 5,000 pictures in Aperture, and this is the first time this has happened, all the other pics show up fine as thumbnails on both user's sides.
    Any ideas about this?
    Peter

    >Sorry, but that is plain BS
    Let's try to be a bit less flamey, shall we?
    >For starters, in order to use the laptop's keyboard, the external monitor has to be way too high, or the laptop/keyboard way too low, since the darned laptop screen gets in the way.
    True, but when using an external monitor (in the office) I also have my external keyboard and mouse. The laptop is on the left and behind, sitting on a riser so the bottoms of both screens are at the same level. External display is on the right. Both angled slightly inward towards me. The laptop overhangs the front of the riser (and the external keyboard) so the display is not too far away.
    >Secondly, your scheme underscores the futility of using a laptop and takes away any portability advantage you may have had.
    I don't see that. The screen IS profiled, just not as well as the external screen. It's plenty adequate for sorting/filtering shoots and preliminary editing, with more serious color correction, output sharpening, et. handled when back at the office.
    >Third, you won't be generating much income doing photography or Photoshop work on a lousy laptop screen "in the islands", or at least not for long. You may have earned your vacation, but the laptop sure isn't going to "pay for it". You may permanently lose some clients instead.
    I'll have to tell my clients that one. I'm sure they'll find it worth a chuckle. True the last trip was mostly spent coding and working in Flash, and the more critical Photoshop work I did needed a modest tweak once I got back to the good monitor, but it was pretty close and easy to fix. Technically I suppose working on a trip doesn't mean the trip is paying for itself, but rather than bleeding twice (traveling AND not working for a week) I'm only bleeding once. And I happen to enjoy work, so it's not a vacation killer.
    > I stand by my fundamental aversion to laptops.
    And I by my attraction to them.

  • Added photos to the video timeline but they don't display.

    I have added some photos to the video timeline but they don't display. The end of the last clip is frozen and then the next clip starts once the time for the photo display has elapsed.
    A previous photo that I'd inserted in the project previously DOES run correctly. I suspect it may be to do with the fact that I've used cutaways in part of the video. However, where I'm inserting the photos is not in a section where there is an existing cutaway.

    It would appear that it's a bug with iMovie. It won't let me add new photos to the duplicated project, but it WILL let me add them to the original project.
    After searching the Discussion forums, it would appear that it has affected other users; some have used 'workarounds', but the solution doesn't always work for all. Hope Apple can address it.

  • Aperture 3: Photos don't display in browser or Viewer

    Some of my photos don't display in the browser or Viewer panels. It's displayed as greyed out. I am running Aperture 3.2.2. I have tired to rebuild permissions and the database without luck. Updating the preview doesn't work either. For some of the photos, if I double click, the photo appears in the Viewer panel but when I double click it goes back to the greyed out view.

    Some of my photos don't display in the browser or Viewer panels. It's displayed as greyed out. I am running Aperture 3.2.2. I have tired to rebuild permissions and the database without luck. Updating the preview doesn't work either. For some of the photos, if I double click, the photo appears in the Viewer panel but when I double click it goes back to the greyed out view.

  • Why some sites don't display pictures on my IPod Touch?

    When I surf the web on my IPT(IPod Touch)some sites don't display pictures....Instead there is a kind of blue Lego cube with a question mark on it...
    Thanks,
    JF

    The most common cause is that the site uses Flash. Currently, the Touch doesnt' support Flash. If it's not Flash, it may be some other protocol or app that the Touch doesn't support.

  • High Resolution Photos Don't Display

    Hello,
    We have a fully patched Lync 2013 installation with a fully patched Exchange 2013 installation. We've moved all users to the Unified Contact Store, and have had all users upload high-res photos. I can test this via the URL like this:
    https://server/ews/Exchange.asmx/s/GetUserPhoto?email=[email protected]&size=HR648x648
    I can definitely see high-res photos. Unfortunately, Lync doesn't display them! We get the old, low res AD photos that are horrible. I have read through everything I can find to ensure high-res photos are enabled in Lync, but they just don't display.
    Any ideas on how to fix / troubleshoot this?
    Thanks!
    Nolan

    Hi, depends what constitutes everything you could find =)
    Can you confirm that the 'DisplayPhoto' attribute of your associated client policy is set to allow ALL photo's, and not just those from AD.
    Use the below from Lync Management shell to query the attribute status against your client policies.
    Get-CsClientPolicy | Select Identity, DisplayPhoto
    Kind regards
    Ben
    Blog:www.gecko-studio.co.uk/ 
    Twitter:
      LinkedIn:
      Facebook:
    Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
    or queries.

  • I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

    I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

    Does this essentially mean there is no way to fix this problem on my end? It's a pity because the design and branding of my brochure will suffer if I remove transparencies and use different fonts. It also concerns me moving forward because it means the quality of print on my pieces will be significantly lower because most commercial printers use Adobe products.

  • Hi, emoticons in incoming messages to my iPhone 5 don't display as graphics but as keystrokes. Can you help? Thanks

    I should have said that emoticons in incoming messages received using yahoo mail on my iPhone 5 don't display properly

    have you ever thought that the person sending the message to you is sending the emoticons as keystrokes or that emoticons selected in Yahoo mail do not translate as expected to an iphone or that embedded images like emoticons in emails do not come across as you might expect?

  • New topics are compiled in but don't display when help button is pressed

    Folks,
    I'm using RoboHelp HTML Build 6. I am the only writer who uses RH and have been using this build for 2 years or so.
    I recently got a new map file from the developer containing 2 new map IDs. I used the same steps to import the map file, create the new topics, and map them to the new map IDs that I have been using for years. But when I compiled RH and pasted the chm into the application folder, those 2 new topics don't display when the help button is clicked on the dialog box to which they are mapped.
    When I generate the chm I can look at the output at the bottom of RH project view and see that that the 2 new htm files are being compiled into the RH project. I can also see them if I open the generated chm and go into the TOC and click on a link to them.
    Does anyone have any ideas? I have tried redoing the usual procedure (see below) for the importing and mapping from scratch several times. I have also tried BugHunter (see below).
    Procedure for Importing and Mapping (this time the help for all the older dialog boxes works but not for the 2 new ones)
    1. Open the new map (.hm) file from the developer and add #define followed by a space to each entry beginnng with the string HID in the new map file (I don't know why but nothing works unless I do this.)
    2. Delete the old map file from the RH project.
    3. In Windows Explorer, copy the new .hm file into the RH project folder.
    4.In Project Manager view, open Context-Sensitive Help. Right-click on Map Files. Select Import. Browse and select the new map file.
    6. Map the new topics using File, Edit Map IDs.
    7. Generate the .chm and pasted it into the application where it always goes.
    BugHunter Procedures and Results
    I first tried the Test HTML Help API dialog.
    I specified the .CHM file I compiled and tested both options:
    --HH_DISPLAY_TOPIC: I put in the name of the new help (htm) file and its relative path and clicked Help. Nothing happened.
    --HH_HELP_CONTEXT: I put in the Map Number for the new dialog box and clicked Help. The new help topic I had created displayed.
    I also used the Tools tab in BugHunter to do a CSH (context sensitive help) Test. I identified the chm file and opened it and put in a new map number, then clicked Show Help. Nothing happened.

    Welcome to the RH forums.
    On the surface it sounds like you have done everything correctly so it should just be a case of going back and double checking that you have the correct CHM, that the mapid is exactly the same as in the app and that the app has been updated.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

Maybe you are looking for

  • Need help for two thing:: JFace/SWT and Drawing an updating graph! plz help

    Hey all, This is my first post on this forum and I was wondering if you guys can help me with two problems that im currently having and I would be really grateful. 1. When ever i try to use the SWT/JFace tools and run it as a java app. I get this err

  • Strange behavior of JDBC Adapter

    Hello everybody! I found a pretty strange behaviour of JDBC Receiver Adapter during problems with network (big thanks to our Basis). According to the status in Adapter Engine, the message wasn't processed. In the database I can see these inserts. How

  • Kernel26-icc compiled with Intel's compiler instead of gcc

    I'm working on kernel26-icc, it's the kernel26 but compiled with Intel's compiler. Can't seem to upload it to AUR ("Invalid name: only lowercase letters are allowed.") http://www.linuxdna.com/ So far I've this: PKGBUILD # Maintainer: Mathias Burén <m

  • Using variables within the definition of ExcelWorkbook in the Data Services 4.2

    Hi Together We have installed the Datas Services 4.2 with a matching SAP BO 4.1 Installation The Repositories are hosted on a MS SQL Server 2012R2. The System is a Windows 2012 R2 Server Within a Repository I try to define an ExcelWorkbook. Within th

  • SSRS Subreport - Renders very slow

    Hi All, I have a subreport which is embedded in the main report (form report) which is inturn embedded in a list. The report is executed for different levels with each level having different number of records (say 100, 150, etc.) and gives us a form