Layout and Pagination... Limiting my data to top 500 records

Hi,
My report is based on SQL, it's displaying only top 500 records... May I know how to fix it...?
I've tried different options under Report attibutes -> Layout and Pagination but no success yet
Thanks

Try closing OAE and the application if running.. Seems like the changes don't take effect until you come back into OAE... At least that is what mine does.

Similar Messages

  • Report attributes - layout and pagination

    When you set the pagination scheme to Row Ranges X to Y(with next and previous links), Number of Rows to 15 and Max Row count to 1000, I need to know what happens with the query. When the user selects the next (or previous) 15 records, does the region's query fire again and query all 1000 (or more) records?
    I hope this makes since. I just need to know if the application is selecting all the records over and over as the user move through the report.
    Thanks

    Thank You, Thank You, Thank You.
    That is indeed the point I am trying to make.
    My report is a SQL Query (PL/SQL Function body returning SQL Query) and is based on information provided in several PopUp LOVs. The more LOVs used, the more information provided to the WHERE CLAUSE, and therefore the less data returned to the screen.
    When the End User produces a small report, they are likely to want to sort it.
    But when they bring back huge amounts of data, they don't want it sorted. Especially not automatically sorted.
    In most cases, this is happening when we are joining two or three tables with say 10 million rows on each table. The join condition is good (meaning there is not a Cartesian Product) but the resultant data is 10 million rows - something you not likely want to sort. Even with a limit on the number of rows returned (Report Attributes - Layout and Pagination - Max Row Count) to something reasonable, like 500, the 10 million resultant rows are first being sorted and then the first 500 returned.
    So, yes, a "sort-enabled" report should NOT automatically sort. Which is what is happening.
    Of course, it might be a good thing to have some sort of Variable that we could set on a page to decide if we want automatic sorting. On most pages, an automatic sort is great - as the amount of data returned will always be small.
    On the pages where I have this problem, it would be great to do the automatic sort when one or more of the PopUp LOVs are populated. So, within a "After Submit" process I might want to turn automatic sorting on.
    Hey, if we are going to ask for an enhancement/change, we might as well ask for something really flexible.

  • Layout and Pagination Problem

    I had created a web page with a filter parameters on top of the web page and a report region with a report with an SQL query in PL/SQL Function Body Returning SQL Query. This is similar to the Issue Report in the Issue Tracker System example.
    The problem is if you are on the last page of this report and then click edit to edit the last record on this page and delete it in the edit webpage then when you return to the Report page, you will see something like 1-5 of 25 in the list with a Next link on the right. If I click the Next link it just displays the same page again. You have to select some other item in the list then it will display some data again. How can I avoid coming back to an empty web page? Or just at least display the previous button so they can go to the last page of data which is now the last page of data. This does not seem quite right here. Also a similar problem happens with filtering if you are on the last web page. Sorry I am wordy and also new to HTML DB!

    I get this problem as well. The workaround is to fire a reset pagination process when the submit/delete button is pressed.
    This will then reset the pagination to the first record on delete or submit avoiding the blank page problem (only draw back is you may be on the last record page and will now find your self back at the first record, but i think it beats getting a blank page!!)

  • Apex 4.2.1: Region table layout and pagination

    See https://apex.oracle.com/pls/apex/f?p=57688:2
    Theme 24, table-based layout. Page template = One Level Tabs, Left Sidebar.
    All 4 regions are report regions using the report region and 2-column portlet as the region and report templates respectively.
    Regions 1.1 and 1.2 are supposed to be in the same row in different columns so 1.1 has New Grid=Yes and 1.2 has New Column=Yes. Ditto for 2.1 and 2.2
    1. Trial and error shows that simply changing the Pagination of report region 1.1 from None to Bottom-Right causes the layout to shift such that 1.2 moves to a grid row by itself! What is going on here? Surely a "trivial" change like whether pagination is displayed or not shouldn't cause such a major layout change. Am I missing something?
    2. Regions 2.1 and 2.2 stick together. How can we add some breathing room between them?
    3. If the page template is changed to One Level Tabs, No Sidebar, the behaviour changes. All the regions are rendered in 1 column, ignoring the New Column grid layout setting. Why is this?
    4. In general, with all the layout changes in 4.x, I was under the impression that, when using a HTML Table based page template, simply using the New Grid/New Row/New Column, etc attributes on the Region attributes would be sufficient to build pages with intuitive, declarative layouts with arbitrary "boxes" laid out on the page, regardless of the content/region type. But that doesn't appear to be the case.
    Can some CSS expert (here's looking at you, Paul) please share some insights on how all this works?
    Thanks

    VANJ wrote:
    Can some CSS expert (here's looking at you, Paul) please share some insights on how all this works?Hi Vikas
    Regions 1.1 and 1.2 are supposed to be in the same row in different columns so 1.1 has New Grid=Yes and 1.2 has New Column=Yes. Ditto for 2.1 and 2.2With table-based region layout I'm getting a Column number selector rather than a New Column switch.
    1. Trial and error shows that simply changing the Pagination of report region 1.1 from None to Bottom-Right causes the layout to shift such that 1.2 moves to a grid row by itself! What is going on here? Surely a "trivial" change like whether pagination is displayed or not shouldn't cause such a major layout change. Am I missing something? No abstruse CSS here, just Pagination Sub-template and table-less layouts coming home to roost.
    Unlike the majority of report templates, the 2-column portlet report template doesn't have an outer HTML <tt>table</tt> to act as a container for the engine-generated pagination <tt>tr</tt>. The pagination row is thus treated by the browser as starting a new row in the current open table&mdash;the region layout. Having the pagination <tt>tr</tt> injected into the 2-column portlet source turns it into tag soup. The whole thing spectacularly fails HTML validation.
    I expect the official Oracle line is that 2-column portlet reports are not supposed to use pagination.
    2. Regions 2.1 and 2.2 stick together. How can we add some breathing room between them?Add this rule to the page Inline CSS. This will add some space on the left of all region cells except the first in the row.
    .regionlayout td+td {
      padding-left: 10px;
    3. If the page template is changed to One Level Tabs, No Sidebar, the behaviour changes. All the regions are rendered in 1 column, ignoring the New Column grid layout setting. Why is this?If this is the layout shown in your link above then I'm not reproducing it. Can you upload an export of your app and provide a link to it?

  • Report - Layout and Pagination bug

    Hello,
    I am using Oracle 10g XE. I was trying to add pagination to a report, it is working ok but if I select for the display position "Top and Bottom" only the bottom pagination is visible.
    Is this a bug?
    Catalin Florean.

    Hi,
    There are Top and Bottom – Left and Top and Bottom – Right.
    I suppose that you have something wrong in the SQL Query or in the report.
    Make a new report using the wizard. Then use Report Template – Standard and Top and Bottom – Left.
    Konstantin

  • Layout and Pagination

    Hi,
    I am using sql based report... my issue is that report only shows 15 records...
    how can I change the number of rows from 15 to ALL... Please advice
    Thanks

    Hi,
    Go to Report Attribute and change the Number of Rows and Maximum Row Count to a higher limit. Thanks.
    Regards,
    Manish

  • TabExplorer layout and Paginator

    Hello!
    I am facing this incident:
    I am using a KM Navigation iView with a TabExplorer layoutset (the default layoutset provided by SAP). These KM Navigation & layoutset fail when I click on the pager links at the botton of the iview.
    I mean, when I click on the link in order to move to the next or previous page nothing happens, I am always stuck on the same page (by the way, the first page).
    I hope to be clearly enough.
    Any ideas??
    Any help will be welcome, and thanks in advance.
    Greetings
    Marcelo.
    ps: I am using Netweaver 2004s, EP 7 SP 11

    Hello again:
    searching at SAP Notes I found this:
    Note 987865 - KMC NW04 SPS20 / KMC SAP NetWeaver 7.0 SP12.
    and it textually says that: "UI: Pager did not work inside the Tab Collection Renderer."
    well, I do not know waht to do now........please help me!!
    thanks!!
    Marcelo

  • Get the run date and pages to appear at the top of a BI Answers report

    Hi,
    I'm trying to get the page number to appear at the bottom of each page.
    It should say eg. Page 2 of 10 pages'.
    I'm also trying to get the run date to appear at the top of each page.
    Thanks,
    Sally

    You can't get "page x of y" out of the box, but you can enable "Footers" and use the Page # variable to display the pages. To get the total number of records, you can use this method:
    http://oraclebizint.wordpress.com/2008/01/23/oracle-bi-ee-101332-total-number-of-rows-and-pagination/
    The other thing you can do is use pagination for pivot tables. See this link:
    http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/
    And of course, displaying the run date and time is built in as a variable in the Header (of Header and Footer), which will appear on every page (unlike the Title View the previous poster pointed out, which will only appear on the first page). There you go.

  • Tolerance Limits with Date and quantity

    Hi Experts,
    We would like to set the GR Tolerance Limits with Date and qty.
    how to set the Tolerance Limits for Date and quantity..??
    if we created PO 100qty and date 01-05-009.
    if we receive the goods on 20-04-2009 and 50qty...
    For GR .. Migo should be give error message..
    where can i set this Tolerance Limit Configuration.... can u please explin me..
    Thanks in Advance,
    Anthyodaya .

    Go to SPRO - Material Managemetn - LIV - Invoice Block - Set Tolerence limit.
    USe company code and maintain a value for ST
    ST: Date variance (value x days)
    The system calculates for each item the product of amount * (scheduled delivery date - date invoice entered) and compares this product with the absolute upper limit defined. This allows relatively high schedule variances for invoice items for small amounts, but only small schedule variances for invoice items for large amounts.

  • Tolerance Limits for Date and quantity..??

    Hi Experts,
    We would like to set the GR Tolerance Limits in the Configuration level.
    how to set the Tolerance Limits for Date and quantity..??
    if we created PO 100qty and date 01-05-009.
    if we receive the goods on 20-04-2009 and 50qty...
    For GR .. Migo should be give error message..
    where can i set this Tolerance Limit Configuration.... can u please explin me..
    Thanks in Advance,
    Anthyodaya.

    Hai
    for  quantity tolerence limit  u can do it  while creating  P O  in item details-->delivery tab.
    for date go to SPRO-->mm>purchasing->material master> define purchase value key>in that   st.del.time var               here it wil compare the dates and shows how much deviation is occuring for GR date
    configure messages in SPRO-->mm>environment data--> define attributes of system messages
    hope it may help u
    regards
    chandrasekhar

  • GR  Tolerance Limits for Date and quantity..??

    Hi Experts,
    We would like to set the GR Tolerance Limits in the Configuration level.
    how to set the Tolerance Limits for Date and quantity..??
    if we created PO 100qty and date 01-05-009.
    if we receive the goods on 20-04-2009  and  50qty...
    For GR .. Migo should be give error message..
    where can i set this Tolerance Limit  Configuration.... can u please explin me..
    Thanks in Advance,
    Anthyodaya.

    Hi,
    GR tolerance limits can be set based on the quantity only .It is configuration settings .
    MM-->Inventory Management-->Inventory Management  and physical Inventory --->set tolerance limit/
    Following are the standard settings:
    B1 ( order price quantity variance with error message): 50 %
    B2 (order price quantity variance with warning): 20 %
    VP (variance from moving average price) 25 %
    In case of dates, the tolerance limit settings based on delivery date can be achived by using user exists or create a Z t.code goods receipt copying standard one & write a code to apply your logic while you do the GR.
    Thanks,
    AMIT

  • Set up Tolerance Limits with Date and quantity for GR

    Hi Experts,
    We would like to set the GR Tolerance Limits with Date and qty.
    how to set the Tolerance Limits for Date and quantity..??
    if we created PO 100qty and date 01-05-009.
    if we receive the goods on 20-04-2009 and 50qty...
    For GR .. Migo should be give error message..
    where can i set this Tolerance Limit Configuration.... can u please explin me..
    Thanks in Advance,
    Anthyodaya .

    hi,
    You can do one thing...
    Activate the SLED check...
    BY this when the date goes earlier or late from the expected date, then system show you the messages like:
    1. Earliest delivery date is DD.MM.YY..
    2. Expected delivery date was DD.MM.YY...
    In std sap system, the second message is already error message...so when get late delivery then it'll not be possible to maintain the GR...
    For the qty varinace, activate the quantity variance either via over/under delievery tolerances..or
    Via SPRO settings...
    SPRO >> MM >> LIV >> Invoice block >> check for qty tolerances and make the settings as per your requirement...
    Regards
    Priyanka.P

  • How do I duplicate a spreadsheet keeping all the layout and formulae but without the data?

    I have a good spreadsheet set up. I wish to start a new set of 'books' using the same layout and formula set up but with no data. Other than duplicating the spread sheet and manually deleting the data while preserving the formulae how can I do this?

    Hi Frasercat,
    You could have a table where you input values, and another table with formulae that refer to the input table. Save the original document, then duplicate. Delete the values in the input table. You could Save As Template for future use.
    Regards,
    Ian.

  • Customer listing with address data and credit limits

    Hello all,
    I need a report I can download to Excel detailing address data and credit limits by customer.
    Many thanks.

    Hi
    You can not get the report with address details from standard reports. You have to download the address from table level to excel and you can do what ever you want. If you want a special report what you want you have to contact your programmer (ABAP).

  • Ugrent help. User exit- Read data from BW BPS layout and write to ODS

    Hi,
    I am new to BW BPS and have a req. where i need to read data from BPS layout (EXCEL) and write it to ODS.
    Is there any function module or user exit which read data from excel layout and upload it to ODS. Or can any one help me out how can i write a code for this.
    It is urgent and i need your help.
    Appreciate any kind of input.
    Thanks
    Mamatha

    Dear Mamatha,
    read following documents. i hope it will work for you.
    [http://www.geocities.com/cynarad/reference_for_bps_programming.pdf]
    [Accessing BW Master Data in BPS Functions using ABAP ( Exit Function )|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3dcc423-0b01-0010-4382-aa3e0784b61e]
    Regards,
    Malik
    Give me points if its helpful for you.

Maybe you are looking for