Layout in SFP Tcode not working.
Hi Experts,
I have installed SAP ECC 6.0 with SAP GUI 720 release .
I want to design a Adobe form , when am trying the Layout tab in the form design am getting an error
"Could not start Layout Designer (see long text)".
Then i installed Adobe LiveCycle designer ES 2 from Adobe site .
After that also am getting the same error
Please tell me how to configure Adobe LiveCycle designer ES 2 on my SAP GUI in details.
Thanks
Aisurya
Hi Aisurya ,
Indeed you need the adobe life cycle designer of SAP, you can also find it on the SAP installation CD.
Some ICF services need to be configured.
Hope this help.
KR Vincent
Similar Messages
-
Fixed layout ePub page turn not working in portrait mode
Hello all,
First time poster here. I created a childrens book, full color ePub from the Apple 3.1 ePub template. Everything sems to work great in general. But I wanted the book to be in portrait mode only to get the most out of the graphics. I have the package.opf file set for portrait mode, which shows just one page (correctly), but when turning pages the cool page turn animation does not work when testing on my iPhone5 and an iPad2. Pages just slide left or right. But when I change the opf to allow landscape mode, when testing on iDevices, it shows two pages at a time in any mode and the page turn effect works perfectly. Any way to get the page turn animation to work on just a single page in Portrait mode? To add to it I have an ePub example book from a non-Apple publisher that defaults to single page portrait, and is mostly text (so I'm not sure if its fixed layout or not), and the single page portrait mode allows the page turn animation to work perfectly.
Thanks all!
EDLThe small caps are wrong in Source Sans Regular. This are not correct small caps . This seams to be missing in the font.
But in italic style you will find correct small caps. They only work in InDesign not in ePub.
And if you look in my images (first from InDesign, second from Radium - iBooks looks the same) you can see many difference between InDesign and ePub.
Note the word "pfiffig", the I at the beginning of "Igor" in second paragraph and the "a" in the italic paragraph.
This is very frustrating! -
Report and Layout Import Wizard does not work
We used the Report and Layout Import Wizard extensively in 8.80 with no problems encountered.
We are now upgraded to 8.81 PL07. This is the first attempt at using the wizard in 8.81. The intro window of the wizard, with 'To Start, use the "Next" button' message is as far as I can get. The "Next" and "Cancel" buttons are inoperative - when I click them, there is no response (but they are not greyed out). The program has not crashed - I can move the window, and the "X" close button at top right works, but nothing else does. I am logged in as a superuser, running B1 in an RDP session on the server, same as under 8.80.
Any ideas out there?Hi,
This is a 8.81 PL07 bug!
I had the same problem this week, and i found the note [1615932 - Buttons "Cancel" and "Next" are inactive in Report and layout import wizard window], that says that it is corrected on PL08!
Regards,
Alice -
Run Web Layout in Reports Developer not working properly
I created a simple tabular report on hr.employees. It runs fine for the "Run Paper Layout" button. When I click "Run Web Layout" I get an IE browser window with the following:
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the init-param debug_mode to "true" to see the complete exception message.
I do not know where to 'Set the init-param debug_mode to "true"'
I'm using windows XP
My "home" for the 10g Developer Suite is I:\DevSuite10g
My "home" for the 10g Rel2 database is I:\oracle\product\10.2.0\
I can navigate to http://mycomputer:8890/reports/rwservlet and see the
"OracleAS Reports Services - Servlet Command Help" webpage
I'm not using Oracle Application Server software.
Please Advise........MarkSure, here is the note.
Subject: Running JSP Report in Builder returns: Error: 404 Not Found Oraclejsp: Java.Io.Filenotfoundexception
Doc ID: 372624.1 Type: PROBLEM
Modified Date : 07-JUN-2006 Status: MODERATED
In this Document
Symptoms
Cause
Solution
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to: Oracle Reports Developer - Version: 10.1.2.0.2
This problem can occur on any platform.
Symptomso The loss of functionality
Cannot test jsp using Run to Web Layout button.
o The sequence of events
Open a report in builder.
Click on Run to Web Layout.
Browser shows 404 error.
o The significance of loss
Cannot test reports in builder.
o Include specific error messages (error number with syntax)
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the initialization parameter in debug_mode to "true" to query the complete exception message.</HT
o What IS working
Paper layout reports work.
CauseA space in the name caused the URL call for the jsp not to be valid.
When the URL is generated, the space is treated as the need for a new parameter.
EXAMPLE
JSP name: 'my test.jsp'
Builds the following URL:
http://server:3000%2Fmy+test000203332.jsp?frombuilder=yes&validatetag=yes&JSPRUN=Yes
While the following name without a space produces a good URL
JSP name: 'myname.jsp'
http://server:3000%2Fmyname000203332.jsp?frombuilder=yes&validatetag=yes&JSPRUN=Yes
Note that the '+' is not in the good URL.
SolutionTo implement the solution, please execute the following steps:
1. Rename you report from my test.jsp' (with space) to 'mytest.jsp' (no space) -
Fixed Layout ePub – OpenType features not working
Hi,
I'm working on a ePub with fixed layout using InDesign CC 2014.
I have used some OpenType features like small caps and old style figures for numbers - but they don't appear correct in the ePub.
What can I do?
Thanks for your help
AlmuteThe small caps are wrong in Source Sans Regular. This are not correct small caps . This seams to be missing in the font.
But in italic style you will find correct small caps. They only work in InDesign not in ePub.
And if you look in my images (first from InDesign, second from Radium - iBooks looks the same) you can see many difference between InDesign and ePub.
Note the word "pfiffig", the I at the beginning of "Igor" in second paragraph and the "a" in the italic paragraph.
This is very frustrating! -
"alv grid" layout as default does not work
I created a layout for my ALV and saved it. It is supossed to appear as default but every time I restart the ALV the layout is gone and I have to select it again. Do I have to do something else besides putting it as default in the "Layout choose" selection? Thanks in advance.
Hello,
Did you pass the parameters: IS_LAYOUT & I_SAVE to the ALV function module?
FP_ST_LAYOUT-ZEBRA = C_X.
FP_ST_LAYOUT-COLWIDTH_OPTIMIZE = C_X.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = FP_ST_LAYOUT
IT_FIELDCAT = FP_IT_FIELDCAT
I_SAVE = 'A'
TABLES
T_OUTTAB = FP_IT_OUTPUT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
* Error in calling Standard ALV Functional Module
MESSAGE I019. "Error Occured in ALV Function Module
LEAVE LIST-PROCESSING.
ENDIF.
Hope this helps.
BR,
Suhas -
Error While selecting Layout option in tcode SFP
Hi
I am getting the below error when i select the layout option in tcode SFP.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
How to resolve this error?
Regards,
Abdul HakimHi Hakim,
See the sap note below:
Symptom
Presentation CD 1 "SAP GUI for Windows 6.40" Compilation 3 references this note for additional components.
For information about where to find the successive version of the installation component
"Forms Design Tool" - "Adobe Forms Designer"
refer to Note 962763.
Reason and Prerequisites
This note describes two possible installation procedures:
Direct installation on the workstation
Update installation server (for administrators)
Solution
Direct installation on the workstation
Product: "SAP Interactive Forms" - "Adobe LiveCycle Designer"
Start "ALDsetup. exe" directly on your workstation. If you had already installed an older version of "Adobe Designer 6.0" using "SAP GUI" or "SAP NetWeaver Development Studio", you first need to delete the older "Forms Design Tool" version in the corresponding installation.
Update installation server:
If you have integrated an SAP GUI installation server with
6.40 Compilation 3
6.40 Compilation 2
6.20 Compilation 6
you can add the following product:
Product: "SAP Interactive Forms" - "Adobe LiveCycle Designer":
To do this, start the program
"..\setup\ALDtoGUIServer.exe"
and specify the network path for an existing SAP GUI installation server. After this procedure, you can see the new "Interactive Forms" component in the component selection dialog box of the SAP GUI installation when you attach a new installation package with SAPAdmin. The installation on the workstation is then started as usual using "setup.exe" or "netsetup.exe".
Caution:
Some files on your existing installation server may still be write-protected (read-only).
Make sure that all files in the two directories
"...\Adobe\"
"...\Common Files\"
are not write-protected.
To do this, open a DOS box (input request) and switch to the directory of the installation server and set
attrib -r /s "Common Files\*.*"
attrib -r /s "Adobe\*.*"
before you start "..\setup\ALDtoGUIServer.exe".
Otherwise, you may receive the following error message:
"... .cab cannot be extracted. It may be corrupt."
Regards,
Md Ziauddin -
Adobe forms layout editor not working
Hello
the layout editor in <b>sfp</b> transaction for adobe forms is not working... it says " could not open layout editor" .
can anyone plz suggest whether anything needs to be installed while installing the gui or any patch would do ...
or atleast where to find the patch ..
thanks in advance !Hi,
Actually, after a bit more checking I've found SAP note 962763 with more detail.
You do need Adobe LiveCycle Designer and can download the installer from SAP Service
Marketplace:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 2004S
-> Installation and Upgrade
-> <Choose any OS and DB combination.>
-> Adobe LiveCycle Designer 7.1
Refer the links -
Adobe interactive forms tutorial
adobe forms
Adobe Forms
Regards,
Omkar. -
Hi ,
I have executed a report . I hide one column and saved the layout. The layout name comes on to the selection screen parameter which i have defined on the selection screen.
PARAMETERS: p_vari LIKE disvariant-variant. " ALV Variant
i have made the i_save = 'A' and is_default = 'x'. and also used other function modules reg. Variants.
but if i select the layout variant in the selection screen and execute it is not working . the hidden column also coming on the output.
But if the select the layout variant on the output of the report from the icon select layout it is working fine. the column which i have hidden is not coming. it is perfect. why it is not working when i select the variant in the selection screen.
Regards,
Rose.Hi,
Please try this code
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
w_variant-report = sy-repid.
* Function module to show the variant of a ALV report
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = w_variant
i_save = 'A'
IMPORTING
es_variant = w_kvariant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
p_vari = w_kvariant-variant.
ENDIF.
END-OF-SELECTION.
MOVE w_variant TO w_kvariant.
MOVE p_vari TO w_kvariant-variant.
MOVE sy-repid TO w_kvariant-report.
* Function module to check the variant existence
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = w_save
CHANGING
cs_variant = w_kvariant.
w_variant = w_kvariant.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_html_top_of_page = 'HTML_HEADING'
i_grid_title = text-t06
i_grid_settings = wa_grid_set
is_layout = wa_layout
it_fieldcat = t_fieldcat
i_save = 'X'
is_variant = w_variant
is_print = wa_print
TABLES
t_outtab = t_header
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
CASE sy-subrc.
WHEN 1. RAISE program_error.
WHEN 2. RAISE others.
ENDCASE.
ENDIF.
Regards
Krishna
Edited by: Krishna Gowrneni on Apr 17, 2009 5:27 PM -
Layout variant is not working in background in ALV report
Hi,
I have one LAV report to send the report output through mail in foreground and backgroud.Final internal table is having 46 fileds to display the output.But here user is saving the layout variant and sending that layout variant output to mail id in excel format with zip file.Its working in foreground.But in background its not working.Even if we select the layout variant,its sending all the 46 fileds to mail.
here we have used the below FM to update the fieldcat itab.
CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET'
IMPORTING
et_fieldcat = it_fieldcat[]
es_variant = v_disvariant
EXCEPTIONS
no_infos = 1
program_error = 2
OTHERS = 3.
In for ground NO_OUT = 'x' for non selected fields and NO_OUT = ' ' for selected fields.
But in background NO_OUT = ' ' for all the fileds, even if we select the layout variant.
Please suggest me with the solution.
Regards,
Jayaramhi ,
Do according to this
SORT t_ekbe by belnr.
if t_ekbe[] is not initial .
SELECT MBLNR
BWART
SMBLN
ERFMG " This is the new added field
erfme " This is the new added field
INTO CORRESPONDING FIELDS OF TABLE t_mseg
for all entries in t_ekbe
from mseg
where mblnr = t_ekbe-belnr
AND bwart = '101'.
endif.
after this
loop at t_ekbe .
loop at t_mseg where mblnr = t_ekbe-belnr .
t_ekbe-ERFMG = t_mseg-ERFMG .
t_ekbe-erfme = t_mseg-erfme .
modify t_ekbe transporting ERFMG erfme .
clear t_mseg .
endloop.
clear t_ekbe .
endloop.
Regards
Deepak . -
Copied layout is not working for Sales order item assinment block
Hi Experts,
I copied the standard componet BT115IT_SLS/items view layout with custom role configuration key and worked fine.
I have added one more field to the item view with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete BTADMINI context fileds and This is the issue.
I have seen configured fields only in the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
But Items assignment block is displaying all the fileds (taking from the context node BTADMINI).
I have deleted existing customer configuration and again copied from the standard layout.But I got the same issue.
I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
Please help me , where I have done the mistake and provide me some inputs.
Thanks,
VenkkyHi Experts,
Solved isuues myself.
The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
Thanks,
Venkky -
Planning layout is not working in CRM
Hi Guru's,
I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
Error in planning Services
Error Message count : 0001
Attribute 0BPARTNER has not value
It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
If you know about this error. Please guide me. I]ll reared to maximum points.
Regards
Manoj KulkarniHi Ravi,
Hope you would have handled this issue.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
Thanks. -
Layout adjustment sometimes not working
I'm in a bit of a panic here. We've set up a file that we're due to deliver to a client today, the file has multiple master pages with various margins.
Normally in this type of situation we turn on the layout adjustment so that the text frame moves with the margins when the new master is applied. Normally this works just fine, we use it all the time, but for some reason its randomly NOT working! i.e. the text frame stays the size it was.
There doesn't seem to be any ryme or reason to it, sometimes its a left page, sometimes a right page.
Any ideas?
Thanks,
KenYeah, I tried. Nothing seems to work all the time as is usually does.
I'll have to look again and see if I can find some correlation with the
pages that do not adjust.
Oy!
Thanks again -
N4S: Web Dynpro for ABAP layout editor not working
Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja -
Lightroom 3 Print Moduel Layout Style not working??
Hi all,
With no change in Lightroom, all of a sudden I have issues with the "picture package" and "custom package" settings within the layout styles in the print module.
For instance, if you are in "single image/contact sheet" and you have an image selected and on screen, then when you change to either "picture package" or "custom package" what should happen is that the image is then refected in the new picture package present. This does not happen at all.
I can not even choose a present (which should work), or drag an image onto the page. It seems that "picture package" and "custom package" are simply not working at all.
Does anyone have any suggestions?
computer 1 is an imac using 10.6.8, and computer 2 is a slightly older imac using 10.5.8
PS. it is now happening on both our computers which are on a network??Good point. I don't have the latest. I'll give it a try and post back to the site.
Thanks
Maybe you are looking for
-
[865PE/G Neo2 Series] Suggestions for excellent Air/Fan Cooling - P4 Northwood
Guys, I need some advice here. I've got my 2.8 Northwood up to 3.16 (yea, I know, not great or anything but good enough for right now). Anyway, with the coming of the blazing Summer temps hitting Michigan in the high 80-90s, my case and CPU temps a
-
All, I want to use a pre-fab script to monitor the OS folders on a Windows 2008 R2 Domain Controller and send any changes into the Event Log. But there are two folders in the file path I want to exclude because changes to them would fill up the Even
-
Dreamweaver CS5 not showing all recordsets in databases/bindings/server behaviors windows
Dreamweaver CS5 is not showing all recordsets created on a page in the databases/bindings/server behaviors windows. I'm on XP, DW version 11.5 build 5344. Any idea of how I fix that? Thanks, Betty
-
Hi Guys, While Client export with any profile Background work process stop reason is RFC. system in single system landscape. I want export client profile through SCC8 only. please solve my problem Regards Ganesh
-
Where do new busses get their numbers from?
When I create a new bus in the Environment mixer it will have a number that seems to be coming from the MIDI channel number of one of the software instrument tracks-is that correct? Is it possible to change the number of an existing bus? or do I hav