Layout Service Level Report

Hi together,
does anyone know, how to change the Layout of the Office-Document the Service Level Reports generated by the Solutionmanager? I know how to change the Fooder and Header, but what do I have to do to change e.g. the SAP Logo to the Logo of my company? Is it possible to change the Word Master Document?
Does anyone know?
Best regards
Thomas

Hello Thomas,
You can customize the SLR front page.
You can customize the header and footer, and since the SAP Logo is part of the report header, you should be able to replace it with your company logo. Please visit this link for more details [Customizing SLR FrontPage|https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000598892010E].
Please check the PDF at this location because I beleive it fully answers your question.
You should specifically look at "2.2 Customizing Step by Step - 2.2.2 General Settings - Coverpage".
Regards,
Paul

Similar Messages

How to configure Service Level Reporting???

Hi All,
I have to configure Service Lever Reporing (SLR) on my solution manager for managed systems. Can any one please help me in configuring it? A Step-by-step explanation will be a great help.
Waiting for your kind responses.
Regards,
Faisal

Hi Jared,
Thanks for sharing the link. I have gone through the link.
However, when I edit the "Setup Service Level Reporting" by click the link under "Solution Monitoring->Service Level Reporting" under "Operations Setup", I could get the screen where in I found the below details:
1. Setup SL Reporting (On the left Pane)
2. Variants Administration (under the above head tree)
On the right pane, I could find:
1. Name
2. Type
3. Weeday of Processing
4. Active
5. Date of Next Report
I could successfully give the above details and saved it. However, I dont see any provision for seleting the system SIDs as mentioned in the help.sap.com site proposed by you.
May you help me in selecting the System SID for which I need to declare SLR?
Regards,
Syed

Solution and Service level Reporting in Solution Manager

Hi All,
I have got some requirement , can anyone please provide me the link/blog regarding Solution and Service level Reporting.
Thanks,
vk

Hi,
got confused since previous you said it was enterprise service report,
https://websmp207.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000742027&_OBJECT=011000358700000999072011E
the Following SAP notes
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442799
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1250529
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1391968
Thanks
Jansi

Service Level Reporting - Trend Analysis data missing in the report

Hi Experts,
I'm working with sap solution manager and Business Process Monitoring.
I can't get to know how to configure the system in order to get Service Level Reporting collecting data for "Trend analysis" related to business processes.
In fact, in my reports each trend analysis graph (last week/month six months) is empty, no matter which aggregation type (AVG, MAX or SUM) I use.
It seems like the BI within the Solution Manager doesn't collect the data, or doesn't provide them to SL reporting.
How can I check whether something is missing in my configuration?
Thanks in advance for your help!
Regards,
Paolo

Hi Paolo,
Did you check the followings notes:
1068944 EarlyWatch Alert: Various Smaller Corrections
1470008 EarlyWatch Alert - Issues in ST-SER 701_2010_1
If they do not help, what is your solution manager version?? (ST 400 and ST-SER component versions)
Regards,
Daniel.

Service Level Reporting

Hi,
I am trying to configure Service Level Reporting from Solution Manager 4.0 for one of the satellite system configured in SMSY. After selecting the system, under the link Central Performance History it is mentioned like "Enter the path for monitoring objects in CCMS" and also requesting to enter all indicators of the relevant system. What is the path we need to give and what is indicators meants here ?
Thanks
Aravind.

Hi,
you can find some information on service level reporting under the link:
http://help.sap.com/saphelp_sm40/helpdata/en/36/5ec6267ba34de08c55e3c310ebdece/frameset.htm
And here is Business Process Monitoring described:
http://help.sap.com/saphelp_sm40/helpdata/en/9a/e435e7fa6f4e85a70885a36479be4e/content.htm
Best regards
Csaba

Can any body tell me how to launch a service level report?

I forgot which transaction I can use.
Can anybody tell me ?
Best regards,
Lament

Hi,
SOLUTION_MANAGER is T-code for service level report. please visit below link for more information
[Link|http://help.sap.com/saphelp_sm32/helpdata/en/d0/ff9bd859f24921b289c98500d6ec99/content.htm]
Regards,
Srinivas. N

Compare service level reports between differnce systems

hallo,
I´m wondering if there are a' useful way to compare a bulk of service level reports between other sap systems in one view without having it exported.
so let see you have service level report system A > and you want to compare with sap system B without to export the files and to compare it manually.
looking forward and thanks in advanced ...

hi,
Yes, go to tcode SCOT ---> double click on SMTP (it should be green) under Supported address types -- click on internet set button.
There you can see the output formats. Choose the appropriate SAP documents and select your desired output format.
Hope this helps you
regards
Naveen

What is Service Level Reporting

Hi Guys,
We implemented Early Watch alert successfully in our Solution Manager 7.0. We want to know what is Service Level Reporting and how useful is this. Do we definitely need to have that?
Regards
Raj

Read,
http://help.sap.com/saphelp_sm40/helpdata/en/36/5ec6267ba34de08c55e3c310ebdece/content.htm
Regards
Juan

Service Level Report values not matching to Service Level Dashboard v 2.0 values

Hi Experts,
We have installed SLD v2 on a development SQL server along with WSS 3.0. The SLD is pointed to the SCOM datawarehouseDB to collect the information to have it up in the dials.
We have SCOM 2007 R2 who's OpsMgrDB and OpsMgrDWDB are hosted on a SQL 2008 R2 instance.
I have created the Distributed application and added 3 Service level Tracking to it.
Availibility
Processor Utilization
Memory Utilization
The problem here i am facing is that the values in the dials on the SLD Home sites do not match with the values i get when i run the report for Service Level Tracking Summary under reporting tab in Ops
Console.
What could be probable reason for this ?
Regards,
Prajul

Hello,
Here are some articles related to this issue. Hope they are helpful.
Running a Service Level Tracking Report
http://technet.microsoft.com/en-us/library/hh212726.aspx
Generating a Service Level Tracking Report
http://technet.microsoft.com/en-us/library/dd441422.aspx
The Service Level Tracking Summary Report in System Center Operations Manager 2007 may be empty if TODAY is not selected for the TO date
http://support.microsoft.com/kb/2567404/en-us
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

UCCX 7.1 CSQ Service Level Report

When do these reports start "reporting" on a call? When it hits the CSQ? When the trigger is hit? Just want to make sure none of the recordings are calculated in time to answer. Any information would be appreciated.
Thanks.

No you cannot. One CSQ at a time with the Get Reporting Stats Step.

Is there any report for service level agreement monitoring?

Regards,
Lament

Hello
To configure the SLR Report, goto transaction DSMOP or DSWP
in soution overview, choose your system (i'm suposing you already configured monitoring for your system)
goto tab Solution Monitoring, choose operations setup on the left, and Service level reporting on the right.
there you can activate service level reporting, and customize your report.
If you need more help, let me know.
Regards
Geert

How to edit the Servicve Level Report?

Folks,
Our customer would like to have a Service Level Report (SLR) from the Solution MAnager.
However the first chapter on page 1 called "Solution Landscape Alert Overview" (with some EWA alert warnings) must be deleted from the SLR.
How can we edit the report to delete this chapter?
Is this possible, and if yes; how?
Regards,
Joris

Thanks for the suggestion.
However the part I want to remove cannot be controlled in that way. It simply is not in the checkboxes.
Isn't there a way to go deeper in the SLR and 'hack' out the parts you don't want?
The normal way (via checkboxes) doesn't let you control all chapter in the SLR.
Regards,
Joris

SolMon 3.2, Difference between SolMon report and Service .sap report?

Hi Guys,
last week i found one strange thing, there are differences between the reports of our local SoMon server report and report from service.sap (service message).
why there will be difference like this, Please help me in this regards.
Regards
Srini

Software Components for SAP Solution Manager 4.0 as of April 2007.
SAP_BASIS 700           Basis Component
SAP_ABA       700           Cross-Application Component
PI_BASIS 2005_1_700     PI_BASIS 2005_1_700
ST-PI     2005_1_700     SAP Solution Tools Plug-In
SAP_BW    700           SAP NetWeaver BI 7.0
SAP_AP    700             SAP Application Platform
BBPCRM    500           BBPCRM
CPRXRPM   400           SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST        400           SAP Solution Manager Tool
ST-A/PI       01I_CRM500    Application Servicetools for CRM 500
ST-ICO       150_700       SAP Solution Manager Implementation Content
ST-SER    700_2006_2    SAP Solution Manager Service Tools
ST (Solution Manager Infrastructure, tx solution_manager, SOLAR01)
ST-A/PI (Download modules to get data for service sessions, monitoring)
ST-ICO (Implementation Content - Business Process Repository)
ST-SER (Service Sessions as EarlyWatch Alert, SAP GoingLive Check, Setup System Monitoring, Central System Administration, Setup Business Process Monitoring, Service Level Reporting, ....)
See also SAP Notes:
- 707705 (www.service.sap.com/sap/support/notes/706705) for an explanation on Components for Messages (with lots of key words).
- 394616 (www.service.sap.com/sap/support/notes/394616) Release strategy for SAP Solution Manager
Best regards
Ruediger

EIM 4.3 - Service Levels

Hello,
I have been looking at setting service levels within an integrated EIM environment, and I can't seem to make the correlation between configuring them in my workflow and reporting.
In my workflow, I setup two SL's.
1 - Total Case Activity Time - 8 hours
2 - Total Activity Time - 2 hours
I can see how to setup alarms to notify my supervisors if I am going to exceed my SL set above.
For reporting... I don't see where these service levels are tied into my reports. It looks to me like I need to set a service level manually for each report I would like to do.
I figured Service Levels were kind of like call types, in that I would run a service level report and it would return data based on emails hitting that service level, etc.
If someone has created reports based on the service levels they entered in their workflow, can you let me know what you chose?
Thanks!
Barry

Hi Matthew,
Unfortunately the service levels you enter are just for monitoring and notifying. The actual reports you run, you need to specify the service levels in there manually.
Other than that, I have found no other work around, or had the opportunity to engage eGain directly to try to talk about this.
Thanks!
Barry

Service Availability Report in SCOM 2012

Hi, we are having SCOM 2012 SP1 and need a report on Service Availability for the below services running on the servers
Active Directory
DFS
DNS
PKI
DHCP
Also, would like to understand how the SCOM would report the service availability when there are network issues (primarily WAN Issues) preventing the SCOM Server from reaching the server Hosting the service.
Thanks,
Naren.
Thanks & regards, Naren.

Hi,
In order to generate reports on the services you mentioned, you need to go through two steps for starters.
1. You need to create Distributed Applications for the services (Active Directory excluded since that DA is already created when importing the AD MP) see https://technet.microsoft.com/en-us/library/hh457612.aspx for how it can be done.
2. You also need to create SLA´s (Service Level Tracking in the Authoring pane of the console) see https://technet.microsoft.com/en-us/library/hh230719.aspx
The behaviour can somehow be modified since you decide what should count as donwtime when creating your SLA. However, a server which become unreachable would most likely be classified as critical and therefore it would "bring down" your service
in SCOM.
Once you have created the DA´s you want, you can use the default report "Service Level Tracking Summary" Report under the category "Microsoft Service Level Report Library". Here, you can choose to go back to a certain time to display
your SLA levels. Be aware though, you can never go futher back than to the date where you created the DA and the SLA since that´s when the availability starts measuring.
Regards,
Daniel
Regards, Daniel

Layout Service Level Report

Similar Messages

Maybe you are looking for