LDAP Autoaddressing not working in Mail

I have LDAP directory services set-up in Mail and it works perfectly when doing look ups directly from Address Book. It was working fine from within Mail at first but I seem to run into times when the autoaddressing feature does not work in Mail at least not using LDAP. I have autoadressing enabled in the Mail preferences and as noted, LDAP clearly functions as I can use it successfully from the Address Book look-up function. Any ideas? Thanks in advance for your assistance.
Matt

Hi Maria,
as far I know the application is designed a way, that once there is an empty email this will not be sent at all.
Could you therefore first test the mail form - you can test it with a business partner with the mkt attributes assigned:
If this gives an empty mail, with the text elements not available the issue is related to the conditions of the text fields. You then need to check the conditions.
Alternatively you can try to add any text to the mail form that is displayed independently from the conditions - the mails should then be sent even for the business partners with mkt attributes assigned.
best regards,
Johannes

Similar Messages

  • Add to Address Book not working in mail.app

    On all my computers : MacBook Air and Mac Mini, the Add to Address Book (command + Shift + Y) is not working in Mail.app.
    It doesn't add the email and name in the Address Book (now called Contact).
    Is this a broken link ?
    Best. StG

    Hey Saint-Georges -
    I've got the same issue in the console.  I didn't notice the keyboard shortcut not working but that's happening to me as well.  
    I've gone gone through and repaired the disk and disk permissions.  Still no luck.
    Hopefully someone has a fix.
    Rob
    From the Console:
    6/3/13 5:27:53.922 PM assistantd[4667]: <Error>: Daemon - Sync chunk denied! Canceling sync. [SASyncChunkDenied
      aceId: "26234165-b039-4219-af4d-8f4fa5561ebd"
      properties:
        callbacks: <empty array>
        errorCode: 0
      group: "com.apple.ace.sync"
      refId: "3274A842-6638-4E54-AFB3-F669BCCED462"
      v: "1.2"
      class: "ChunkDenied"]

  • Sound alerts not working in Mail and Ichat apps since upgrade to 10.4.9

    I just noticed my Sound alets not working in Mail and Ichat apps since upgrade to 10.4.9.
    I'm using soundsticks which is playing sounds thru quicktime, itunes, etc but my alert sounds for getting new emails and IM messages is not working. I get the quick "white flash" on the screen instead. I checked the prefs on both apps and it is set to give me the alert sound, I can even test it in the ichat pref when I change the new message alert sound it will play it thru my speakers but when I get a new message in either app it just gives me the white flash.
    I'm read that it can be an issue of not having the balance in the system sound pref set the middle, so I checked that, restarted, all that but still no luck.
    I really like the sound alert features because I can be in another part of my house, turn the sound way up and I'll know when one of my clients is trying to reach me but now I can't do that.
    Any ideas?
    Thanks in advance!
    Brown.Recluse

    Ok, weird, strange...did ONE more restart and now its working fine...who knows?
    Me

  • Hyper links do not work in mail

    Hi All,  Since updating OSX Hyper links do not work in .mail.  I can find no preferences that would affect this.

    Hyperlinks in mail not working
    Mail links do not open in Safari automatically

  • RSS not working in Mail after MobileMe instal

    The title pretty much says it all "RSS not working in Mail after MobileMe instal" The names of the RSS feeds are still there but all have the triangle error message beside them.

    you may have already tried this but in the mailbox menu at the top, try to take all accounts offline then take them all back online again. if that doesn't work you can always do a rebuild which is kind of a pain, but it usually does the trick.

  • Mac Lion. Search function does not work in mails.

    Hello,
    I already wasted several hours trying to find solution for a problem which appeared with Lion, search function does not work, in mail at least.
    I was not using Leopard before and I am not a mac expert.
    (search function was already bad in the normal it was already bad in the normal 10.7 set up but at least it was working in mac mails).
    I tried reindexing via spotlight privacy settings (adding and removing HD) but does not work much better.
    I don't want to go to terminal, as as mentioned I don't know enough about mac to try this.
    What to do?
    Thanks,
    C.

    Anyone? Any ideas?

  • LDAP - Could not send e-mail

    Hi guru
    We used SAP MDM 5.5 SP 6 (64.92)
    In workflow we use e-mail notification, when SAP MDM Server work without LDAP e-mail is sending.
    When we load SAP MDM Server with LDAP, every time when we send e-mail we get error "Could not send e-mail "
    Sender and Receiver Users and their e-mail adress is exist in LDAP and right.
    Moreover, we test sending e-mail from Server(where installed SAP MDM) through telnet for the same users and same e-mail adress(which precent in LDAP) - all work OK.
    Question:
    How we should configure SAP MDM Server for e-mail notification work correctly when it work through LDAP?
    Regards
    Kanstantsin Chernichenka

    Hi Vinay M.S
    Thank you for your answer, but
    Really, in our case mail server attribute was named as "mail" and it exist in mds.ini (but that is not standart name for all ADs)
    My another question: Why e-mail notification doesn't work from workflow in LDAP for all users?
    Additiona information:
    We have ~30000 users in AD but in MDM we used only ~500 from it.
    For test we created 3 simple workflows with e-mail notification block:
    1.Launcher set as user which name starting from symbol "B"
    2.Launcher set as user which name starting from symbol "P"
    3.Launcher set as "Launcher"
    We set as receiver the same user for all workflows.
    In 1 case e-mail notification is OK
    In 2 case e-mail notification isn't work and we got error "Could not send e-mail" in workflow report. but username and sender receiver e-mail is right
    In 3 case  e-mail notification from user which we started workflow  is OK (and for user which name starting from symbol "P")
    Any ideas?
    Regards
    Kanstantsin
    Edited by: Kanstantsin Chernichenka on Oct 2, 2009 1:35 AM

  • LDAP Directories not working at work

    I've used LDAP directories in Address Book at home but when I'm at work the same configurations do not work, only my company LDAP works. This seems odd as I am able to add these LDAP servers and use them at home. Id there some sort of blocking being done? How is that possible? An example is Stanford:
    ldap.stanford.edu
    cn=people,dc=stanford,dc=edu
    port 389

    I had our IT guys come down here once again to try to explain the problem to them. They sort of just stood there slack-jawed, not understanding and told me that Mac Mail won't run on our Exchange server. Well, Mac Mail IS currently running in conjunction with our Exchange server, I need the info for the LDAP server! They act like everything is classified information and that I'm just some crazy Mac-user. I just don't understand how Entourage can access this LDAP server, and Mac Mail can't.
    I tried putting "cn=gravity.com" in the Search Base box but it didn't fix the problem. And what do I put for Scope: Base, One Level, or Subtree? I know what to put for my authentication, but is the server called ldap//:auntie.gravity.gravitymail.com or is it just auntie.gravity.gravitymail.com? Or is it ldap.auntie.gravity.gravitymail.com? I'm just not sure what the problem is. I feel like I'm just trying an infinite number of combinations until it works....

  • "Send" button not working in Mail

    Picked up Leopard on an iMac two days ago. Some of the time when I compose a new email, Mail works fine--I click "send" once I'm through typing and out it goes.
    Other times--like this morning--I try to send an email and the "send" button is transparent and does not click. This is not a server issue. I tried adding the recipients to my address book in case there was some weird thing where that had to be done first. But to no avail--the "send" button won't click, nor will the "send" command within the toolbar or drop-down menus--and so I have no clue how I'm supposed to send this email if the button to do it is not working. Help!

    Unfortunately, the SMTP and outgoing mail settings aren't the issue. The issue is that the "send" button is visible but un-clickable. I tested sending mail from all of my accounts and it works just fine--sometimes. Other times, I try to reply to an email or send out a new one and the "send" button does not allow me to send anything at all.

  • Ldap authentication not working for Solaris 8 host - Help!

    Greetings folks,
    I just recently migrated a host to use LDAP authentication. The only difference between this host and the rest of the hosts in the environment that I've converted to use LDAP is that this one is running Solaris 8.
    Here's the steps I took to migrate it (though, I used the same steps for another Sol8 host in another environment and it works fine):
    ldapclient -P stg -d mydomain.com -D cn=proxyagent,ou=profile,dc=mydomain,dc=com -w secret 192.168.1.69
    My /etc/nsswitch.conf looks like this:
    passwd: files ldap
    group: files ldap
    My /etc/pam.conf looks like this:
    login auth requisite pam_authtok_get.so.1
    login auth required pam_dhkeys.so.1
    login auth sufficient pam_unix_auth.so.1
    login auth required pam_ldap.so.1
    sshd auth requisite pam_authtok_get.so.1
    sshd auth sufficient pam_unix_auth.so.1
    sshd auth required pam_ldap.so.1
    other auth requisite pam_authtok_get.so.1
    other auth required pam_dhkeys.so.1
    other auth sufficient pam_unix_auth.so.1
    other auth required pam_ldap.so.1
    passwd auth sufficient pam_passwd_auth.so.1
    passwd auth required pam_ldap.so.1
    I've also cleared out the local user accounts for my human users, so there aren't any more passwd or shadow entries (yes, I ran pwconv). I also cleaned out the /etc/group entries for the same users. The machine appears to be configured properly, because I can run various DS commands that indicate this:
    hostname# getent passwd user1
    user1::1001:1001:User 1:/opt/home/user1:/bin/bash
    hostname# ldaplist -l passwd user1
    dn: uid=user1,ou=people,dc=mydomain,dc=com
    shadowFlag: 0
    userPassword: {crypt}(removed)
    uid: user1
    objectClass: posixAccount
    objectClass: shadowAccount
    objectClass: account
    objectClass: top
    cn: user1
    uidNumber: 1001
    gidNumber: 1001
    gecos: User 1
    homeDirectory: /opt/home/user1
    loginShell: /bin/bash
    However, in the end, actual logins to this host fail via ssh. Snooping the traffic reveals that all the right info is being handed back to the client, including the crypt'ed password hash, uid, etc. just like I see with other hosts that work.
    Any ideas?
    Thanks!
    Patrick

    I assume you have applied lastest kernel patch and 108993 to this Solaris8 machine, and its nss_ldap.so.1 and pam_ldap.so.1 are the same as the other Solaris8 LDAP clients that are working for ssh via LDAP auth.
    1) Please replace "objectClass: account" with "objectClass: person", I know SUN ONE DS5.2 likes "person".
    2) Did you test and verify telnet/ftp/su working? but SSH not working?
    3) If telnet/ftp/su all worked, and SSH (SUN-SSH or OpenSSH), make sure you have "UsePAM yes" in sshd_config and restart sshd.
    4) It is not a must I think but normally I will add "shadow: files ldap" to /etc/nsswitch.conf, restart nscd after that.
    5) Whenever ldapclient command is run and ldap_cachemgr is restarted, I usually also restart nscd and sshd after that, if not testing result may not be accurate as nscd is still remembering OLD stuffs cached which could be very misleading.
    6) You may use "ssh -v userid@localhost" to watch the SSH communications, on top of your usual "snoop"ing of network packets.
    7) Use the sample pam.conf that is meant for pam_ldap from Solaris 10 system admin guide with all the pam_unix_cred.so.1 lines commented out. This works for me, there is no sshd defintions as it will follow "other".
    http://docs.sun.com/app/docs/doc/816-4556/6maort2te?a=view
    Gary

  • New groups not working in Mail

    Hi,
    After moving to iCloud, Lion and iOS 5, newly created groups in adresbook don't work in mail.
    Groups i set up before I moved work fine. I can see the group when I start typing the name in Mail, but it doesn't ad the contact info after i confirm.
    Any suggestions?

    I thought to simply delete the account from Mail and start again, *but it appears that I cannot even do that.*
    Why not? What is stopping you from doing so?
    Try the Mail "rebuild" setting - Mail/Mailbox/Rebuild
    Message was edited by: CMCSK

  • Search function (Spotlight) not working in Mail

    Hi,
    This just started happening today on my PowerBook G4. The search function in Mail is not working. No matter which mailbox I go into to search for a term it shows 0 results when I know for a fact there should be multiple results. If I search for any of those terms in Spotlight itself it clearly shows me the results in my Mail messages. Is there a preference that I turned off or something? Anybody know what's going here and can help me?
    Thanks.

    I should have tried this before posting, but a reboot fixed my problem.

  • Search Feature Not Working in Mail 10.7.4

    Hi, the search feature is not working properly in Mail since upgrading to 10.7. If I use Spotlight from the desktop, that search will find the particular mail message I'm looking for, but searching directly within mail produces horrible results. I know I can just use spotlight, but sometimes I just want to search within mail. Any suggestions?

    Erase and rebuild index:
    Open Terminal and type$ sudo mdutil -E /
    you'll notice it indexing...

  • LDAP compare not working as documented in SDK

    I'm developing a Java application against Novell eDirectory 8.8 SP6 with
    LDAP and seeing some differences between the Novell LDAP SDK
    Documentation and the actual LDAP implementation inside eDirectory for
    LDAP. The problem is that compare(java.lang.String dn, LDAPAttribute
    attr) method of com.novell.ldap.LDAPConnection is not working as
    described. I've noticed two strange issues:
    1) LDAP COMPARE THROWS AN ERROR WHEN IT SHOULD NOT
    According to the documentation ( the value FALSE should be returned when
    the entry does not have the value or the attribute. However, eDirectory
    return a -603 LDAP error when yo do a compare on an entry which does not
    have the attribute (it does exist in the schema though).
    In example:
    Compare on User John Doe without any value for myauxattr:
    ldapcompare -x -H ldap://ldapserver.test.com -D cn=admin,o=org -w
    <password> cn=jdoe,ou=users,o=org myauxattr:testfornomatch
    COMPARE RESULT: NO SUCH ATTRIBUTE (16)
    ADDITIONAL INFO: NDS ERROR: NO SUCH ATTRIBUTE (-603)
    UNDEFINED[/B] --> INCORRECT RESPONSE
    COMPARE ON USER JOHN DOE WITH VALUE 'TESTFORNOMATCH' FOR MYAUXATTR:
    LDAPCOMPARE -X -H LDAP://LDAPSERVER.TEST.COM -D CN=ADMIN,O=ORG -W
    <PASSWORD> CN=JDOE,OU=USERS,O=ORG MYAUXATTR:TESTFORNOMATCH
    TRUE
    COMPARE ON USER JOHN DOE WITH VALUE 'OTHERVALUE' FOR MYAUXATTR:
    LDAPCOMPARE -X -H LDAP://LDAPSERVER.TEST.COM -D CN=ADMIN,O=ORG -W
    <PASSWORD> CN=JDOE,OU=USERS,O=ORG MYAUXATTR:TESTFORNOMATCH
    FALSE
    *1) LDAP COMPARE DOES NOT THROW AN ERROR WHEN IT SHOULD
    Moreover, if you don't have the Compare Rights to that attribute,
    eDirectory always returns FALSE on a LDAP compare, which I beleive is
    not correct. A return value of FALSE implicitly states that the compare
    could be done, but no match is found. However, insufficient rights
    prevent the compare, so eDirectory should throw an error. Something like
    LDAP: error code 50 INSUFFICIENT_ACCESS_RIGHTS.
    In example:
    Compare on User John Doe without any value for myauxattr and no compare
    rights:
    ldapcompare -x -H ldap://ldapserver.test.com -D cn=limiteduser,o=org -w
    <password> cn=jdoe,ou=users,o=org myauxattr:testfornomatch
    [B]FALSE* --> incorrect response
    Compare on User John Doe with value 'testfornomatch' for myauxattr and
    no compare rights:
    ldapcompare -x -H ldap://ldapserver.test.com -D cn=limiteduser,o=org -w
    <password> cn=jdoe,ou=users,o=org myauxattr:testfornomatch
    *FALSE* --> incorrect response
    Compare on User John Doe with value 'othervalue' for myauxattr and no
    compare rights:
    ldapcompare -x -H ldap://ldapserver.test.com -D cn=limiteduser,o=org -w
    <password> cn=jdoe,ou=users,o=org myauxattr:testfornomatch
    *FALSE* --> incorrect response
    My question is: should I file this as a bug or is the LDAP SDK
    documentation invalid?
    sveldhuisen
    sveldhuisen's Profile: https://forums.netiq.com/member.php?userid=1813
    View this thread: https://forums.netiq.com/showthread.php?t=48106

    Thanks Ab for pointing that out. That explains the error when doing a
    compare on an entry without that attirbute. However, if no compare
    rights are given, LDAP compare shoudl throw an error as well. This part
    seems like a bug to me. My conclusion is that the documentation of JLDAP
    is incorrect and we have a bug upon insufficient rights. Interesting is
    that also the code Examples for LDAP compare in the SDK are invalid as
    well: no check is done if the attribute exists on the entry before
    calling LDAP compare.
    ab;231062 Wrote:
    > I think what you are seeing is correct per RFC 4511:
    >
    > <quote>
    > Upon receipt of a Compare Request, a server will attempt to perform
    > the requested comparison and return the result in the Compare
    > Response, defined as follows:
    >
    > CompareResponse ::= [APPLICATION 15] LDAPResult
    >
    > The resultCode is set to compareTrue, compareFalse, or an appropriate
    > error. compareTrue indicates that the assertion value in the ava
    > field matches a value of the attribute or subtype according to the
    > attribute's EQUALITY matching rule. compareFalse indicates that the
    > assertion value in the ava field and the values of the attribute or
    > subtype did not match. Other result codes indicate either that the
    > result of the comparison was Undefined (Section 4.5.1.7), or that
    > some error occurred.
    > </quote>
    >
    > Note the part about an "appropriate error", and the bit about the
    > comparison being Undefined. The full RFC can be read in many places,
    > such
    > as the following URL:
    >
    > http://www.ietf.org/rfc/rfc4511.txt
    >
    > Good luck.
    sveldhuisen
    sveldhuisen's Profile: https://forums.netiq.com/member.php?userid=1813
    View this thread: https://forums.netiq.com/showthread.php?t=48106

  • Exchange Email not working in Mail v5.0

    I am trying to forward my school email address which uses exchange to the mail app. I have done this successfully on my older mac that is running Mail v4.5. However, when I try it on my macbook it does not work successfully and it has a pop up window that asks for the password everytime I try to bring the account "online" and even when I enter the password correctly it still continues to ask for the password. I have used all the same internal and external servers that are being used on my old imac but it refuses to work. I must not understand how to set it up correctly. Help?

    No idea what/how Exchange works, but Here's what I'd try...
    Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under any Mail item, change it, or delete it and start over.
    See if this might apply, Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
    http://support.apple.com/kb/HT1631
    Resetting your keychain in Mac OS X...
    >If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544
    Reboot and next time Mail asks for a password, enter it & allow it to be stored in the Keychain.

Maybe you are looking for

  • Sub Report Performance problem

    Our current software configuration is Microsoft SQL Server 2008 R2 (10.0.2531.0) where our data is housed. Our User Interface is Microsoft Visual Studio 2008 (Visual Basic) and Microsoft .NET 3.5 SP1 platform.  We use Crystal Reports 2008 (12.0.0.683

  • Cheque configuration

    HI Guys, It is the first time that I am configurating Cheque process and I would like to check some information regarding Cheque printing and Cheque configuration. 1- Can we juat print cheque using continuous Cheque?! Or we can print cheque one by on

  • How do I see all my contacts, can't page through?

    When I open Contacts it is always on the same page and I can't find a way to page through to see my other contacts. As far as I know I haven't deleted them. All most all my contacts came via Facebook but the contact whose page seems stuck, I added my

  • How do I transfer ipad files to a new itunes library?

    Hello, my itunes library was destroyed when my harddrive failed.  I still have data on my ipad, but do not know how to transfer it to a new itunes library on my mac (snow leopard).  I found several applications that claim to do just this and more for

  • How to push software update thru ARD

    How can I push software update to the client macs thru the ARD? Please help.