LDAP Field Mapping in 4.6C - Using WebAS 6.10+ as an LDAP Gateway

Dear All,
We have a need to enable CUP Functionality (we use GRC AC 5.3) for one of our oldest R/3 systems - on 4.6C. All other R/3 backends are on 4.7+ releases, so it's a multiple backend configuration for GRC AC.
However, LDAP Field Mapping functionality is missing in 4.6C. It was enabled through LDAPMAP in the higher releases only.
At the same time, I discovered in one SAP HR document a diagram, which shows that indeed 4.7+ can map and post data directly to LDAP, but for 4.6C and below you can use WebAS 6.10+ as an LDAP Gateway. Meaning that 4.6C calls through RFC some functions in the higher release R/3 system to use its functions for Field Mapping and further transfer of user data to the target LDAP server.
But... I can not find anywhere how to configure 4.7 / 6.0 servers to act as an LDAP Gateway for the older 4.6C server to bypass its limitation - absence of built-in LDAP Field Mapping functionality.
Advice on how to realise this concept will be highly appreciated.
Thanks,
Laziz

Hi,
In order to migrate users, groups and password you have to use the command ldapaddent as you did with this sintax:
# ldapaddent -D "cn=Directory Manager" -w secret -f /etc/group group
# ldapaddent -D "cn=Directory Manager" -w secret -f /etc/passwd passwd
# ldapaddent -D "cn=Directory Manager" -w secret -f /etc/shadow shadowNote that you must use passwd instead of people container.
I suggest you to check this article from BigAdmin http://www.sun.com/bigadmin/features/articles/nis_ldap_part1.jsp
G.

Similar Messages

Making selective fields editable in adobe form [using web dynpro]

Hi,
I have displayed an adobe form using web dynpro application. But I have to make certain fields (not all fields) on this adobe form editable. I dont want to make this adobe form interactive because I dont have to save any data in database. The data entered in the editable fields will be saved as a pdf.
What I did so far:
1) The fields which I want as editable, I have given there type as "User entered/ optional" & for rest of the fields I have given type as "Read only".
2) In web dynpro, I have enabled the adobe
3) This is not making the fields editable.
4) If I write the following code in my webdynpro method WDDOMODIFYVIEW, then my data coming from adobe is not getting displayed even though the fields get selectively editable.
*data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
*LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
*check first_time = abap_true.
*LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT('adobe').
*LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
*LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
Any inputs regarding this??
Thanks & Regards.

Hi,
Like I had mentioned using the following code in my webdynpro method WDDOMODIFYVIEW, my data coming from adobe form was not getting displayed even though the fields get selectively editable.
*data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
*LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
*check first_time = abap_true.
*LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT('adobe').
*LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
*LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
So I kept this code & I also kept the Interface type "ABAP Dictionary based".
Additionally in Webdynpro, I used adobe form generated FM to get the adobe content & passed it to the "content" parameter of my adobe component in webdynpro.
Thanks & Regards.

ABAP code which will use function module during field mapping in LSMW

Hi,
During field mapping in LSMW, for one of the field called field, I want to use a function module 'QF05_RANDOM_INTEGER', which will generate random numbers and map that random number to that field.
How do I write ABAP code which uses function module, during filed mapping for a particluar field in LSMW ?
Please help...
Regards,
Tushar.

Hi Tushar,
You can write in FORM ROUTINE and LSMW.
I hope you know how to write ABAP code at field level.
If not ...
Come to change mode->select the field->Rule->ABAP Code
write a perform statement in ABAP code at field level.
<b>PERFORM test</b> using val
             changing valu.
Go to Utilities(at menu)->switch layout-> extras ->select Layout->check Form routine-> it will display a FORM Routine... at bottom
this is the place where you can write some code for
<b> FORM test</b> using value
          changing value1
FM call....
.ENDFORM
Get the value1 returned and use for the Field population.
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

Related Content Field Mapping using "Page Field" mapping type

In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
Graham

Hi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham

Mapping the CMP Fields with the Database Table using Websphere???

Hi,
How to Map the CMP Fields with the Database Table using Websphere
thru ejb.jar.xml???
Thanks,
JavaCrazyLover

Hi,
How to Map the CMP Fields with the Database Table using Websphere
thru ejb.jar.xml???
Thanks,
JavaCrazyLover

How to use web service consumer as a source to connect to Salesforce?

I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has operations like create, retrieve, upsert, delete etc so if I want to read data from account then could someone guide me on how to use the web service consumer to view the fields after importing the wsdl. After importing the wsdl and selecting the operation say create, the columns (ports) displayed shows different groups but it doesn't list the object fields? what am I missing here? And what is the operation to read data from Salesforce is it "retrieve" from the entripse wsdl? As a newbie on this, I appreciate any inputs on this topic.

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

QA: Designer's operation to Add one more Field to display in Query Result Web Part

QUESTION ABOUT Query Result Web Part presentation +1 Field
I'd be looking at a property of Web Part to look up Discussion Board through Query Result Web Part. Currently it displays 'Title' column of Discussion Board, and my caring requirement is presentation customization to hold double
columns of 'Title'+'Updated Date'. How could I add one more field 'Updated Date' to display in addition to that preexisting 'Title' field?
Any procedural steps to realize how to add Filed to display in Query Result Web Part?

Hi Yoshihiro,
As I understand, you want to add the field to display in Query Result Web Part in SharePoint 2013.
Which web part does you use? Content query web part or search results web part?
If you use search results web part, you could edit the discussion board result template and add the updated field in the template.
You could go to Design Manager: Edit Display Templates (site setting-> look and feel->design manager->edit display template), download the Discussion Item.htm file, and edit the file.
After editing, upload the file.
The articles below are about how to modify an existing Display Template in SharePoint 2013.
http://www.learningsharepoint.com/2012/09/17/sharepoint-2013-the-new-display-templates-for-styling-your-content/
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/01/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-1.aspx
If you use content query web part, you could edit the content query web part, in the Property Mappings section select the “Change the mapping of managed”, and add the “modifiedOWSDATE” (it means the last modified date) in the line, after
that you could see the update date under the title.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Flex Fields Mapping in HR - BI Apps (hr_file_flex_kff_dff_user_config_map)

Please refer to the below post for Flex Field Mappings in HR using the file hr_file_flex_kff_dff_user_config_map.csv
http://download.oracle.com/docs/cd/E20490_01/bia.7963/e19039/anyimp_configworkforce.htm#CIADDICF
I follow the example of W_JOB_D:
Job Dimension:
JOB_CODE
JOB_NAME
JOB_FAMILY I think this is typo as the OBAW field is JOB_FAMILY_CODE and not JOB_FAMILY
Anyways, I need to map other flex fields from EBS, is there any other document that explains it further than in the url I have posted.
If any of you have carried out this flex mapping for HR analytics using EBS R12, please let me know.

good question...I have no idea...i looked into this briefly and I am wondering if it has anything to do with the following flexfield limitation..I dont think this is the reason but thought I would mention it. If you find out why this limitation is there, let me know..I would be interested. Also..CHAR datatype has a limitation of 2000 but that doesnt seem to be the problem. I think its a EBS side limitation..not a BI side one.
Here is the exerpt on hidden flexfields and the link for flexfields:
"Normally, Oracle Application Object Library can create new code combinations (dynamic insertion) from your form with a foreign key reference using only the concatenated segment values field. However, if you expect the concatenated length of your flexfield to be defined to be larger than 2000 (the sum of the defined segments' value set maximum sizes plus segment separators), then you should create these non-database fields to support the dynamic creation of new combinations from your form.
*If you do not have these fields and your users define a long flexfield (> 2000 characters), your users can experience truncation of key flexfield data when trying to create new combinations*."
URL: http://download.oracle.com/docs/cd/E18727_01/doc.121/e12897/T302934T457085.htm

To access pdf files from application server using web.show_document

Hello!
If my pdf file is copied in Oracle_home/forms90/java directory.Then using web.show_document i can access the pdf file.But I can't copy all the pdf files in /forms90/java directory.We have lacs of pdf files which I want to keep in my own directory.But my requirement is if my pdf file is in /home2/docs directory in (Linux application server) ie in my own directory where I store all the pdf files.Then web.show_document does not open the pdf file.It says page cannot be displayed.For that I think we have to configure the directory /home2/docs directory as a webserver.From otn I got something like forms90.conf file in application server where we have to set virtual directory mapping etc.If the pdf is in local machine then in orion-web.xml file we have to mention real path and save the file and shutdown oc4j instance and restart it again.I tried it.But it is not working.Can u give me step by step instructions to solve this problem.I found a few links in discussion forum.But is doesn't work out.My pdf file is in /home2/docs directory in Linux application server.Please treat it as urgent.
Regards
Jayashree

Hi Sandeepmsandy,
There is no available code sample for this scenario. You may write your own.
Step 1: Get pdf URL from sqlite database. Please refer to the following MSDN blog and see a code sample.
http://blogs.msdn.com/b/robertgreen/archive/2012/11/13/using-sqlite-in-windows-store-apps.aspx. Note, you need to retarget the project to 8.1 and then get two sqlite packages from NuGet before building this sample.
Step 2: Use some special classes to get file from serer.
HttpWebRequest can help download small pdf files. For more information to see
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/de96a61c-e089-4595-8349-612be5d23ee6/download-file-with-httpwebrequest?forum=winappswithcsharp. It’s easy for use, but if you want to download the larger or many files, it’s recommend to use
BackgroundTransfer namespace. The classes in this namespace provide a power way to transfer files in the background. See a code sample from MSND.
https://code.msdn.microsoft.com/windowsapps/Background-Transfer-Sample-d7833f61.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Issue while generating report using web.show_document with https

Hi All,
I am facing some issue while seeing the report using web.show_document as shown below:
https://ucrmskr.apac.nsroot.net:10301/forms/html/001725032_gca.rtf_
In this case the report opens directly without asking for me to save or open or cancel option
whereas if I hit
http://scrmskr.apac.nsroot.net:7801/forms/html/001725032_gca.rtf_
it asks for save or open or cancel option
so that I can save the report to my machine and open in wordpad format
The report generated in the first case is not coming in proper format
Below are my forms.conf mappings:
# Name
# forms.conf - Forms component Apache directives configuration file.
# Purpose
# It should include the weblogic managed server (routing) directives for
# the servers where Forms applications are deployed and other miscellaneous
# Forms component OHS directives.
# Remarks
# This file is included with the OHS configuration under
# $OI/config/OHS/<OHS Node Name>/moduleconf sub-directory.
# virtual mapping for the /forms/html mapping.
RewriteEngine on
RewriteRule ^/forms/html/(..*) /workaroundhtml/$1 [PT]
AliasMatch ^/workaroundhtml/(..*) "/ucrmap1/weblogic/bea/ucrms/config/FormsComponent/forms/html/$1"
RewriteRule ^/ucrms/icons/(..*) "/workaroundicons/$1" [PT]
AliasMatch ^/workaroundicons/(..*) "/ucrmap1/weblogic/bea/ORA_PFRD/forms/java/$1"
RewriteRule ^/forms/help/(..*) "/workaroundhelp/$1" [PT]
AliasMatch ^/workaroundhelp/(..*) "/ucrmap1/ucrrgbg2/help/$1"
<Location /forms>
SetHandler weblogic-handler
WebLogicCluster kauh0079:9001
DynamicServerList OFF
</Location>
Please let me know what needs to be done additionally if we are trying to hit https because in the second case we were hitting http with similar mapping in diff environment and it was generating report successfully.
Regards,
Harish

Thanks for answering,
I changed the URL from
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
to
http://nbotlaguduru.dms.local:8889/export/FMSLaborChargesalcs20060829132645.pdf
and the same problem occured
the file is located on my local C drive in:
C:\lcs\export
seems as though I am missing something else as well
any ideas?

How to add a new field in the Field Mapping

Dear Freinds,
               I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3   fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
   ZPA30_08                       LSMW
       Fields
           TABNAME                      Table Name
                               Source: ZP0008_STRC-PERNR (Personnel Number)
                               Rule :   Default Settings
                               Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
           TCODE                        Transaction Code
                               Rule :   Default Settings
                               Code:    ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamla

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Novice Help with Creating Opportunities Using Web Services 2.0

Hello,
I recently took over our CRM integration services and was asked to push some data via our custom portal.
We use our portal to automate the creation of new opportunities in our Oracle CRM System.
The code was developed using Web Services 1.0
I was recently asked to add data to the "Parent Opportunity" field upon creation of a new Opportunity. Now I may be mistaken and if I am I will be very pleased, but it seems to me this field isn't available in 1.0
If I am mistaken and there IS a way to push data to the "parent opportunity" field using 1.0 Please completely disregard what I have typed below.
Upon looking at the WSLD for 2.0 I see "ParentoptyID" as an available field.
I took it upon myself to try and move this process over to 2.0 but I have hit a few major stumbling blocks. Here is the working code for 1.0:
Public Function CRMAddFinalShipmentOpportunity2(ByVal Session As Session, ByVal Subject As String, ByVal Type As String, ByVal Priority As String, ByVal Account As String, ByVal DueDate As String, ByVal Status As String, ByVal Description As String, ByVal AnnBudget As String, ByVal oppType As String, ByVal partNumber As String, ByVal currency As String, ByVal Territory As String, ByVal Owner As String, ByVal Opp As String) As String
Dim opportunity As nkkcrm.SiebelOpportunity20.Opportunity = New nkkcrm.SiebelOpportunity20.Opportunity
Dim input As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Input
Dim results As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Output
Dim strPriority As String = "1-High,2-Medium,3-Low"
Dim strType As String = "Call,Correspondence,Email,Event,Final Shipment - Book,Final Shipment - Special,Lead Follow-Up,Meeting,Opportunity Follow-Up,Other,Presentation,Quote Follow-Up,Sample Follow-Up,Service Request Follow-Up"
Dim strStatus As String = "Completed,Deferred,Waiting For Someone Else,In Progress,Not Started,Assigned,In Call"
CRMAddFinalShipmentOpportunity2 = ""
' Validate Data (CRM will validate if owner is valid)
If Owner = "" Then
AddError("Error: Missing Owner")
Exit Function
End If
If Subject = "" Then
AddError("Error: Missing Subject")
Exit Function
End If
If strType.IndexOf(Type) < 0 Then
AddError("Error: Invalid or Missing Type")
Exit Function
End If
If strStatus.IndexOf(Status) < 0 Then
AddError("Error: Invalid or Missing Status")
Exit Function
End If
If strPriority.IndexOf(Priority) < 0 Then
AddError("Error: Invalid or Missing Priority")
Exit Function
End If
If Not IsDate(DueDate) Then
AddError("Error: Invalid or Missing DueDate")
Exit Function
End If
Try
opportunity.Url = Session.GetURL()
opportunity.CookieContainer = Session.GetCookieContainer()
'Create the opportunity
Dim tmpAry(0) As nkkcrm.SiebelOpportunity20.Opportunity
input.ListOfOpportunity(0) = tmpAry
input.ListOfOpportunity.SetValue(New nkkcrm.SiebelOpportunity20.Opportunity, 0)
'Assign the opportunity Properties
input.ListOfOpportunity(0).Owner = Owner
input.ListOfOpportunity(0).OpportunityName = Subject
input.ListOfOpportunity(0).AccountName = Account
input.ListOfOpportunity(0).SalesStage = "Rebuy"
input.ListOfOpportunity(0).CloseDate = Date.Today
input.ListOfOpportunity(0).Territory = Territory
input.ListOfOpportunity(0).stProject_Name = "FINAL SHIPMENT REBUY"
input.ListOfOpportunity(0).SourceCampaign = "Rebuy"
input.ListOfOpportunity(0).OpportunityType = oppType
input.ListOfOpportunity(0).Revenue = AnnBudget
input.ListOfOpportunity(0).Description = Description
input.ListOfOpportunity(0).bRebuy = "Y"
input.ListOfOpportunity(0).ProductInterest = partNumber
input.ListOfOpportunity(0).plCurrency_Type = currency
'input.ListOfOpportunity(0).ParentoptyId = Opp
'insert the opportunity
results = opportunity.OpportunityInsert(input)
If results.ListOfOpportunity.Length > 0 Then
CRMAddFinalShipmentOpportunity2 = results.ListOfOpportunity(0).OpportunityId
End If
Catch webex As WebException
AddError(webex.Message)
Catch ex As Exception
AddError(ex.Message)
End Try
End Function
What changes might I need to make in order to make this function correctly using Web Services 2.0?
Currently I get the following errors- For every line of input.ListOfOpportunity(0) I get: '..cannot be indexed because it has no default property.'
Another example of an issue I'm running into is: 'SetValue' is not a member of 'nkkcrm.SiebelOpportunity20.ListOfOpportunityData'

We were able to make this work by re-modeling my code after a code sample I found that creates new Activities.
Here's my code in case it helps someone scanning these forums in the future (Disregard the Opportunity entries that are missing when you compare this to my earlier code- Those weren't relevant to making this work or not work, I simply am not using them now.):
Public Function CRMAddFinalShipmentOpportunity2(ByVal Session As Session, ByVal Owner As String, ByVal Subject As String, ByVal Type As String, ByVal Priority As String, ByVal DueDate As String, ByVal Status As String, ByVal Description As String, ByVal POValue As String, ByVal oppType As String, ByVal partNumber As String, ByVal currency As String, ByVal servername As String, ByVal pass As String, ByVal usrname As String) As String
'Get SessionID
Dim sessionId As String
sessionId = getSessionLogin(usrname, pass, servername)
Dim Opportunity As nkkcrm.SiebelOpportunity20.Opportunity = New nkkcrm.SiebelOpportunity20.Opportunity
Dim OppInput As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Input
Dim OppOutput As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Output
Dim strPriority As String = "1-High,2-Medium,3-Low"
Dim strType As String = "Call,Correspondence,Email,Event,Final Shipment - Book,Final Shipment - Special,Lead Follow-Up,Meeting,Opportunity Follow-Up,Other,Presentation,Quote Follow-Up,Sample Follow-Up,Service Request Follow-Up"
Dim strStatus As String = "Completed,Deferred,Waiting For Someone Else,In Progress,Not Started,Assigned,In Call"
'Validate Data (CRM will validate if owner is valid)
If Owner = "" Then
AddError("Error: Missing Owner")
Exit Function
End If
If Subject = "" Then
AddError("Error: Missing Subject")
Exit Function
End If
If strType.IndexOf(Type) < 0 Then
AddError("Error: Invalid or Missing Type")
Exit Function
End If
If strStatus.IndexOf(Status) < 0 Then
AddError("Error: Invalid or Missing Status")
Exit Function
End If
If strPriority.IndexOf(Priority) < 0 Then
AddError("Error: Invalid or Missing Priority")
Exit Function
End If
If Not IsDate(DueDate) Then
AddError("Error: Invalid or Missing DueDate")
Exit Function
End If
'Instantiate OpportunityData
Dim objListOfOpportunity As nkkcrm.SiebelOpportunity20.ListOfOpportunityData
Dim objOpportunity As nkkcrm.SiebelOpportunity20.OpportunityData()
Try
objOpportunity = New nkkcrm.SiebelOpportunity20.OpportunityData(0) {}
objListOfOpportunity = New nkkcrm.SiebelOpportunity20.ListOfOpportunityData()
objOpportunity(0) = New nkkcrm.SiebelOpportunity20.OpportunityData
'Assign the opportunity Properties
objOpportunity(0).Owner = Owner
objOpportunity(0).OpportunityName = Subject
objOpportunity(0).AccountName = "UNKNOWN"
objOpportunity(0).SalesStage = "Rebuy"
objOpportunity(0).CloseDate = Date.Today
objOpportunity(0).Territory = "North America"
objOpportunity(0).stProject_Name = "FINAL SHIPMENT REBUY"
objOpportunity(0).SourceCampaign = "Rebuy"
objOpportunity(0).OpportunityType = oppType
objOpportunity(0).Revenue = POValue
objOpportunity(0).Description = Description
objOpportunity(0).bRebuy = True
objOpportunity(0).ProductInterest = partNumber
objOpportunity(0).plCurrency_Type = currency
'Connect the Opportunity to ListOfOpportunity
objListOfOpportunity.Opportunity = objOpportunity
'Connect ListofOpportunity to Input Parameter
OppInput.ListOfOpportunity = objListOfOpportunity
Opportunity.Url = servername & "/Services/Integration;jsessionid=" & sessionId
'Opportunity.CookieContainer = Session.GetCookieContainer()
Opportunity.OpportunityInsert(OppInput)
Return "success"
Catch webex As WebException
AddError(webex.Message)
Catch ex As Exception
AddError(ex.Message)
End Try
End Function
Public Function getSessionLogin(ByVal usrname As String, ByVal pass As String, ByVal servername As String)
Dim loginurl As String = servername & "/Services/Integration?command=login"
'MessageBox.Show(loginurl);
Dim req As HttpWebRequest = DirectCast(WebRequest.Create(loginurl), HttpWebRequest)
' username and password are passed as HTTP headers
req.Headers.Add("UserName", usrname)
req.Headers.Add("Password", pass)
' cookie container has to be added to request in order to
' retrieve the cookie from the response.
Dim cookie As Cookie
req.CookieContainer = New CookieContainer()
' make the HTTP callby
Dim resp As HttpWebResponse = DirectCast(req.GetResponse(), HttpWebResponse)
If resp.StatusCode = System.Net.HttpStatusCode.OK Then
' store cookie for later...
cookie = resp.Cookies("JSESSIONID")
If cookie Is Nothing Then
Return "invalid session"
End If
Return cookie.Value
Else
Return "invalid session"
End If
End Function

In XI Mapping multiple fields mapping to single target field.

Hi Friends,
In XI Mapping multiple fields mapping to single target field.
For example my requirement is :
Source Fields:(This RFC BAPI Structure)
Empno                0-1
EmpName           0-1
Address             0-1
Taget Field is:
Details               0-1
The above three fields passed to the Details Field. Here i am using Concat function
But i have one query on that on,Every field having "line Break" required.
Can you please help me out above this requirement.
Thanks in Advance,
Sateesh N.

If you want a line break between the three fields, then try
passing a,b,c to the udf and in the udf you would have
return a+"\n"+b+"\n"+c;

Mapping input values for a web service connection to a range of cells

I've created a web service connection in Xcelsius data manager. My web service requires an array of integer as input parameter. How do I map input values for a web service connection to read from a range of cells in the spreadsheet, e.g. $A$2:$A$20, in similar way of mapping output values to write to a range of cells in the spreadsheet?
For output values of the web service, I can specify to map the output values to write to a range of cells. However, it doesn't seem to work for reading the input values.
I can map input values for each node to a single cell, e.g. $A$2, in the spreadsheet. However, when I set the "Read From" field to a range of cells, e.g. $A$2:$A$20, it only reads in the first value in the range.
Is there any way that we can do this mapping for input values as we do for output values?
Your assistance is very much appreciated.
Regards,
Van

Van,
There is a workaround for that...
Example:
My Webservice accepts input data range in a specific format with " :" symbol, i.e. 072008:082008
Now what i do is
A1 = 072008
A2 = 082008
A3 = CONCATENATE(A1,":",A2)
so A3 = 072008:082008
Now i map the input value in web service to cell A3
P.S have 2 input box components and map it to cells A1 and A2, i.e you are giving users an option to enter the range of values...then web service will capture the range and refreshes data with the range of values user entered.
hope this helps..
-Anil

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

LDAP Field Mapping in 4.6C - Using WebAS 6.10+ as an LDAP Gateway

Similar Messages

Maybe you are looking for