Leaving one line space before starting the text in smartforms

Hi,
I want to leave one line space before starting a text.
i LEFT one line space on the text node but it's not working.
eg: i need to print "Header text". Before printing this i need one line space. Created a blank node for space still not working. Can anyone help me on this.
Thanks,
Rose.

Hi Rose,
Enter a Line Feed in the Smartform Editor.
in the editor type as ,
"Header text"
where / is Line feed and * is a Default Paragraph Format.
Regards,
Balakumar.G.

Similar Messages

How to obtain a space before printing the text

Hi friends,
I have created a smart form where i need to print
External Order Notes : (space to print ) text should start after the space.
I have used Include Text in text type, start--Append Directly
Can any one please tell me how can i get the space before the text .
Point will defentely be rewarded.
This is very urgent.

HI
give TAB values as u required

According to material num,for every new material num one line space.

Hi,
please give suggestion how to get vertical lines without breaking as shown below.
I want according to material number(AT1),for every new material number one line space have to be there.
I used 'skip' so the verical line is breaking for every new material.
Material Number |   Material Description
_____________ |______________________________________________
|    AT1                  |   Catalyst - 18165-RNA-A013-Y2
|    AT2                  |   Catalyst - 18165-RNA-A013-Y2
|    AT3                  |   Catalyst - 18165-RNA-A013-Y2 (COPY)
|    AT4                  |   Catalyst - 18165-RNA-A013-Y2
|    AT5                  |   Catalyst - 18165-RNA-A013-Y2
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
| CGW0001              SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
| CGW0001              SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
I need line continous but for every new material to material gap.
Thanks,
sree.

Hi,
write code like this.
write : /1 sy-vline,120 sy-vline.
give the line size for ex 120
reward if usefull

Adding lines/shapes without moving the text

Hi,
Im trying to use the draw with pen function to draw lines around a text, but every time i finish the line the text moves into a different position. How can i make it so the text is locked in one place? And if i want the line to go through the text, is this possible?
Thanks!

What version of Pages?
Turn off Text Wrap on the objects.
Peter

Theme select by user before start the course?

Hi Everyone,
I need help of someone.
1. I want create theme selector page by user before start the course every time?
2. I want to change the font size of CC caption (Audio Script/Transcript) by user in run time?
Thanks
-Sarif

This is not currently possible in Captivate.

Asking for sign in before starting the program.

Photoshop cc started to ask me to sign in before starting the program, but, when i'm sure my email and password is correct and my internet connection is on, it can't seem to sign in, no matter how much i clicked 'sign in' it won't sign in. it's says that i need to connect to the internet, but i'm already connected. in the end photoshop won't start up.
any ideas?

There seems to be some help here:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
-Noel

How can I control the space before and after text in a table

Hello
I have a series of icons with descriptions, these are lined up with icons on the top row and description text in the bottom row. Each icon and description is divided by a stapled line.
The text is of varying width, therefore the column width must also wary. However I would like to make the space before and after the text equal in all instances (See image).
If there is anyone that can tell me how to do this with tables or any other tools I would be very thankful.

The only way I can think of to maintain equla spacing between the text ov vartying lengths and the vertical lines is to put each icon/text pair in it's own frame fitted to content, make each vertical line a separate object, then select them all and distribute the spacing.

Help! Extra one line space in text file???

halo, i am doing a program to download a created text file into pc... the download program is just retrieve records from database and write it into a text file... then i will pass that created text file name to another program, then it will prompt out the window message dialog box to allow user to save or to open the text file....
now i want to know what will cause one extra line at the top of the downloaded text file??
Here is my coding, assume the file name is file1...
response.setContentType("text");
response.setHeader("Content-Disposition","attachment;filename=" + file2);
int Read1;                              FileInputStream stream1 = null;                    try {                                   File f = new File("c:/mysql/data/mrs/download/" + file2);
     stream1 = new FileInputStream(f);               while ((Read1 = stream1.read()) != -1){               out.write(Read1);                         }//end while                              out.flush();                              }//end try</p>                                                                 finally {</p>                              if (stream1 == null){
     stream1.close();
     }//end if</p>
     }//end finally</p>

                                     response.setContentType("application/text");
                                     response.setHeader("Content-Disposition","attachment; filename=\"" +fileName);
                                     response.setContentLength((int)file.length());
                                     OutputStream outputStream = response.getOutputStream();
                                     FileInputStream stream = new FileInputStream(file);
                                     BufferedInputStream bufferedInputStream = new BufferedInputStream(stream);
                                     InputStream inputStream = new BufferedInputStream(bufferedInputStream);
                                     int count;
                                     byte buf[] = new byte[4096];
                                     while ((count = inputStream.read(buf)) > -1)
                                          outputStream.write(buf, 0, count);
                                     inputStream.close();
                                     outputStream.close();

Is there a way to link text fields, so when you reach the end of one line it moves to the next?

I often use Acrobat Pro to create forms, whether it be from an existing document or from scratch, and this has always irritated me. I know you can create a text field and select the Multi-line option; however, this is not what I am looking to do. I have a form that has a Yes or No Radio Button, then below it says "If yes, please explain:" followed by 3 lines to respond. When I run it through the Form Creator, it places three text fields on the response lines - as it should. The first line is shorter because of the text, which is why I cannot use the Multi-line option. So is there a way to link these three text fields, so that when I reach the end of the first line it stops and automatically moves to the next?
Here is a picture of what I am looking at:

These types of lines are a left-over from printed forms. There's no reason
to keep using them if your form is digital.
The best approach is to combine the fields to a single multiline field, and
get rid of the first line. Trying to link text fields together is very
tricky. I haven't yet to see it done properly.

I have made a book of my I Photo pictures. In certain layouts there is a textframe. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it or should I delete the text "Write your text here" ?

I have made a book of my iPhoto pictures. In certain layouts there is a text frame. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it untouched or should I delete the instructing text "Write your text here"?

Most pages have layouts for pictures only or pictures with text boxes. Either select the same layout for that page but the one without the text box or put a space in the text box.
Putting a space in the text box will avoid getting the warning when ordering that there's an unfilled text box in the book. The box will not be visible in the final product. You can and should check the book before ordering by previewing it as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it
Happy Holidays

Transfer Upgrade from one line to another on the same plan.

Is it possible to transfer an upgrade from one line to a second line, and then have the phone that was used on the second line, be switched to the first line? If so, how would I go about doing this online?

Yes. The account owner should be able to log in to MyVerizon and click on "Transfer this upgrade" when they view all of the upgrades available for their account. If they don't have that option, another way is to just order the phone normally, then activate the new phone on the line it was ordered for briefly to accept the Terms & Conditions of the new contract. Then you can activate the old phone from that line again, which will free the new phone up to be activated on the second line.
If you're getting a 4G phone, you'll want to call in to Customer Service before you start activating though, because the 4G SIM cards can complicate the activation process.

How to leave half line space in SAP Script

Actually , I have a doubt regarding half line spacing on SAP Script ..
I am working on Cheque Printing with fbz5
Now the issue in the date, there are 8 box for the date in cheque .
i.e 0 2 0 7 2 0 1 4
Currently the date is comming on the cheque box ..like half up the box and half inside
IF I give one space in cheque window of my script with / its taking complete 1 space
and result is ,it going down ..with one space
I want to leave exact half line space ..so date is adjusted in the middle .
I also tried moving my cheque window from upper margin in all format(CH , CM , MM IN ..) above
But it is taking exact one space .

Hi Darshit,
While creating the tab position, you have a option of line spacing.
make it to 0.5 lines, to make exact half line.
And also another way out, you can check by moving the 8 box created for the date up by 0.5 lines.
Regards,
Ganesh Lathi.

Lines above and below the text

Hello
I am working in a file created by somebody else and am having a problem with styling - I just cant figure how it was created.
There are lines running the length of the text box below the heading. When i try to remove the text the line dissapears as well, so clearly its somehow inbedded in that box. There are other instances when i remove the text box but the lines stay and i cant remove them at all, i cant click on them... (at first i thought they were a part of the master but clicking comand shift doesnt get them off). what are these? can somebody help please?
thanks a lot
mae

Hi Peter
no, they are not paragraph rules, that's what i thought at first. they are something else, very frustrating i just cant work it out...
any other ideas? and what about the ones that i cant even click on?...
thanks

How to remove line space before/after paragraph in Photoshop Elements?

I am using Elements 12 and want to remove the extra spacing that is automatically inserted between paragraphs after a hard return. Is there some way to adjust the extra spacing before/after a paragraph in Elements?

Try resetting the tool (the little arrow next to four lines in the Text Options panel). Setting the leading manually works fine for me in PSE12 with hard carriage returns,
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

The most Arch way of changing MAC before starting the network

Hello friends! Congrats to me , today I'm entering the Arch World!
Before installing on real hardware, I decided to give it a try in VirtualBox. I'm excited, Arch is so simple and cool!
I have 3 questions so far.
1. My provider locks the accounts to MAC addresses, so I must set the correct one before contacting the dhcp server of the provider, where should I insert the mac changing command or maybe I must create a script and execute in the DAEMONS section of the rc.conf before the network?
2. Currently I'm running other Linux distribution and I have several XFS filesystems which I want to keep (i.e. mounted under /opt, /data/music, /data/vm, etc..) and some other XFS partitions which I would like to format for using with Arch (i.e. /boot, /home, /, /usr, /var) and also would like to encrypt them (and also the swap). How can I do that? And is it possible to encrypt also the partitions where there is already some data (e.g. /data/docs)?
3. Do I need separate /usr/local ? For example, under DragonFly BSD the user installed packages are going to /usr/local, the original system ones are in /usr, so it's OK to have a small /usr and a large /usr/local, but for example, in Ubuntu everything go to /usr and /usr/local remains unused. What about Arch?
Thank you.
Added after 5 minutes:
Oh, I forgot to ask about one more thing, is there some way of installing Arch without IPv6 support or I must disable it after installation? Thanx.
Last edited by arch_archer (2010-05-19 23:13:07)

ipv6 is a kernel module (there's a bunch of net modules, for different protocols like bluetooth), and you can blacklist it after you install to keep it from being loaded
http://wiki.archlinux.org/index.php/IPv … the_Module
also, the only thing that's going to end up in /usr/local is stuff you put there yourself (scripts, etc), the arch way is to use pkgbuilds/makepkg rather than make and make install, so afaik the only things that might end up there by installing things are symlinks to /opt in a few packages
EDIT: about /usr, unless you plan on mounting it as read-only or different mount options than /, I would just leave it as part of / (just a personal preference though)
EDIT2: here's an article on encryption, you might find what you need there http://wiki.archlinux.org/index.php/Sys … r_dm-crypt
Last edited by thestinger (2010-05-19 23:21:30)

Leaving one line space before starting the text in smartforms

Similar Messages

Maybe you are looking for