Left Arrow Key Closes during Rename

Has anybody else noticed sometimes that when you're renaming a file and using the left arrow key to move through the text, the Finder closes the editability of that file name? As you proceed to use the left arrow key, it would close subfolder after subfolder (if you're in list view). It' pretty annoying for power-users since I'm used to renaming file after file without using the mouse. I navigate with arrow keys a lot.

Yes, I get this too, it's really annoying, I'm going to look for a way to stop the left arrow closing the folder, maybe it's in the keyboard short cuts in system settings, and just needs removing. So annoying, especially for newbies.
Bill.

Similar Messages

  • Left arrow key does not go back one character at a time

    on my key pad, I cannot backup "over" characters one space at a time  I am not looking to DELETE, merly to backup one character at a time.  I know I can use the function key along with the arrow key for word at a time jump.  I can jump one character to the right by pushing that key but I cannot do that with my left arrow key.  slight annoyance, but I swear it worked before. . .

    The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
    Use one of these methods to open the tab history list:
    * Right click on the Back or Forward button
    * Hold down the left mouse button on the enabled Back or Forward button until the list opens
    You can look at this extension:
    * Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

  • Left arrow key -- probably a stupid question.

    In some applications my left arrow key doesn't work. I've noticed it most in Word for mac, but I know it has happened elsewere, too. And in safari the left arrow key tabs often functions like tab. I'm new to Mac (and just getting used to fn + delete to delete forward). Is this another key combination thing I'm missing? I've discovered using Word that fn + <-- is "home," and that works just fine.
    Thanks!

    I have this exact same problem. Has anyone found a fix. I called Apple Care and they said it was not a hardware problem, as this left arrow key problem only happens in Word. They also could not find a fix to the problem and, of course, referred me to Microsoft. I had already spoken with Microsoft and they, of course, referred me to Apple. I am desperately trying to a fix, as I use Word to write upwards of 100 page reports and not being able to use the left arrow key is a nightmare.
    Please someone help.
    Nancy

  • Spacebar, left arrow key working intermittently Help!!!

    Am using a macbook pro 17 inch mid 2010 and running yosemite beta 10.10 my spacebar, left arrow key, caps lock, is working intermittently.
    I have removed the keys and cleaned but it works for a while and stops. I havent spilled any drink or water on it. I checked show keyboard viewer  and i attached the screenshot please help its really urgent.

    Hi Ralph
    Please confirm if replacing the keyboard will solve the problem, since my geographical location makes it difficult to access an apple shop.
    Thanks

  • HELP: Shift-left arrow key shortcut

    I've got a weird problem that started sometime recently on my MacBook Pro. When I press Shift and left arrow key it is "hiding or showing all open windows." I want to change this back to what it used to be: "extend text selection one character to the left (*)".
    I went to the the System Preferences>Keyboard>Keyboard Shortcuts but I could not find Shift-left arrow key listed anywhere in there.
    Can anyone help me? This is driving me crazy.

    Hi,
    I spent some time finding an App that had the "Orignal Action" of Backspacing the Highlighting.
    Word (2204) seems to have it (TextEdit didn't)
    I have Word but don't use it much.
    I did find this:-
    Looking at the one on display I go to item 3 before getting lost
    Hope it give you some clues.
    The Print Instructions may help to see what is listed and possibly Set.
    Print a list of shortcut keys
    1. On the Tools menu, point to Macro, and then click Macros.
    2. On the Macros in pop-up menu, click Word commands.
    3. In the Macro name box, click ListCommands.
    4. Click Run.
    5. In the List Commands dialog box, click Current menu and keyboard settings, and then click OK.
    6. On the File menu, click Print.
    Note If you made changes to shortcut key assignments, the changes are included in the printed list of shortcut keys. Shortcut keys you assigned to macros are not included.
    8:45 PM Friday; May 28, 2010
    Message was edited by: Ralph Johns (UK)
    Message was edited by: Ralph Johns (UK)

  • V200 Keyboard got sick when press Up+left arrow key

    I'm addicted to some action game that using keyboard
    but then when I'm pressing Up+Left arrow key together and hold it , the other buttons seem to be soooo slow, What happened?
    Any idea?
    Sorry for my bad english.
    Message Edited by bobodada on 12-13-2008 01:03 AM

    shameless self bump ?

  • My LEFT arrow key seems to be working all too well???

    it just started today and MAN is it annoying as ****
    ill be typing like this and my *blinking line* will start to go left suddenly until its at the end of the box, and i literally have to smack, my keys to get it to stop, its never happened before and i've spilt NOTHING to make the keys sticky at all in that area!!!
    PLEASE HELP
    my macbook will NOT goto sleep because of this CRAP
    :'(

    OH! and i can tell when its acting up before my mouse cursor totally vanishes ever when im moving it sometimes

  • TS1381 My left arrow does not work on my macbook pro(model A1226).  I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work)  - HELP!!

    My left arrow does not work on my macbook pro(model A1226).
    I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow). 
    In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work. 
    I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
    Here is the kicker!  In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
    I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
    Can anyone think of any other rabbit holes I can search?
    thanks and regards
    vats3

    I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

  • Using left and right arrow keys as accesskeys

    I am trying to remediate an online course and need to apply left arrow key to next button (advance to next page) and right arrow key to back button (return to previous page). Does anyone have javascript code that would allow this?

    This is already built into major browsers.  This assumes the browser history folder contains more than one page. If the browser's history folder is empty, nothing will happen.
    For Windows users:
    Alt+Left arrow = back one page.
    Alt+Right arrow = forward one page.
    http://en.wikipedia.org/wiki/Access_key
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Left- and right arrow key out of order

    Hi,
    I'm afraid to need your help again. My left and right arrow keys doesn't work as they're supposed to. While can neither navigate through my desktop icons nor the buttons in any dialog nor the text I'm just writing. The cursor stops blinking as soon as I press one of these keys so the system recognizes the key press but the cursor doesn't move. Showkey returns the keycodes 105 left and 106 for the right arrow key.
    While logging in with LXDM im able to navigate back and foth while entering my password as well as the keys work properly in tty. It seems to be only LXDE, where the keys are not working.
    Furthermore my function keys like mute, volume up and down and so on aren't working too. I don't know if both errors are relatet to another.
    Maybe anyone has an idea what I might do to fix this?

    ondoho wrote:
    disjunkt wrote:
    ondoho wrote:are you logging in with lxde-session or with openbox-session (or sth similar)?
    I think I use lxdm to log in. As soon as I'm logged in, I'm using lxde. Ist this what you have to know?
    no, you have to know it.
    i meant: when you login with lxdm, do you have a choice between lxde-session and openbox-session (or sth similar) because there's a difference how openbox gets started and which config files are parsed.
    It's an lxde-session. And LXDE uses openbox-lxde as displaymanager.
    /etc/xdg/lxsession/LXDE/desktop.conf
    1 [Session]
    2 window_manager=openbox-lxde
    3
    4 [GTK]
    5 sNet/ThemeName=Clearlooks
    6 sNet/IconThemeName=nuoveXT2
    7 sGtk/FontName=Sans 10
    8 iGtk/ToolbarStyle=3
    9 iGtk/ButtonImages=1
    10 iGtk/MenuImages=1
    11 iGtk/CursorThemeSize=18
    12 iXft/Antialias=1
    13
    14 [Mouse]
    15 AccFactor=20
    16 AccThreshold=10
    17 LeftHanded=0
    18
    19 [Keyboard]
    20 Delay=500
    21 Interval=30
    ondoho wrote:once you isolate the proper rc.xml, you can check it for typos that might cause this. they are not always reported back as errors.
    The part of the rc.xml I posted beforehand is the only one in that file that is tagged with <keyboard> and there is no binding for the left or right arrow key. There are some in combination with the control or shift key but that shouldn't do anything regarding my problem.
    ondoho wrote:maybe you're running some background software/daemon that grabs the keys? what's in your autostart?
    This are the deamons which are running:
    $ systemctl -all list-units
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
    dev-cryptpool-crypthome.device loaded active plugged /dev/cryptpool/crypthome
    dev-cryptpool-cryptroot.device loaded active plugged /dev/cryptpool/cryptroot
    dev-cryptpool-cryptswap.device loaded active plugged /dev/cryptpool/cryptswap
    dev-disk-by\x2did-ata\x2dHitachi_HTS543225A7A384_E2021042G28Z6A.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2did-ata\x2dHitachi_HTS543225A7A384_E2021042G28Z6A\x2dpart1.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2did-ata\x2dHitachi_HTS543225A7A384_E2021042G28Z6A\x2dpart2.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2did-ata\x2dHitachi_HTS543225A7A384_E2021042G28Z6A\x2dpart4.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2did-dm\x2dname\x2dcryptpool.device loaded active plugged /dev/disk/by-id/dm-name-cryptpool
    dev-disk-by\x2did-dm\x2dname\x2dcryptpool\x2dcrypthome.device loaded active plugged /dev/disk/by-id/dm-name-cryptpool-crypthome
    dev-disk-by\x2did-dm\x2dname\x2dcryptpool\x2dcryptroot.device loaded active plugged /dev/disk/by-id/dm-name-cryptpool-cryptroot
    dev-disk-by\x2did-dm\x2dname\x2dcryptpool\x2dcryptswap.device loaded active plugged /dev/disk/by-id/dm-name-cryptpool-cryptswap
    dev-disk-by\x2did-dm\x2duuid\x2dCRYPT\x2dLUKS1\x2d15fbcf03325242d5a3d78e1e37664acb\x2dcryptpool.device loaded active plugged /dev/disk/by-id/dm-uuid-CRYPT-LUKS1-15fbcf03325242d5a3d78e1e37664acb-cryptpool
    dev-disk-by\x2did-dm\x2duuid\x2dLVM\x2dxsk3Szp4tobNGQBmFevwBgCUJNPDOEcH4Dn4WEgmy0Wd4oalrdTSyU3mwQj6R3mQ.device loaded active plugged /dev/disk/by-id/dm-uuid-LVM-xsk3Szp4tobNGQBmFevwBgCUJNPDOEcH4Dn4WEgmy0Wd4oalrdTSyU3mwQj6R3mQ
    dev-disk-by\x2did-dm\x2duuid\x2dLVM\x2dxsk3Szp4tobNGQBmFevwBgCUJNPDOEcHllDB1ZzWo40r3U5Lw7ZcpitGvQNRge12.device loaded active plugged /dev/disk/by-id/dm-uuid-LVM-xsk3Szp4tobNGQBmFevwBgCUJNPDOEcHllDB1ZzWo40r3U5Lw7ZcpitGvQNRge12
    dev-disk-by\x2did-dm\x2duuid\x2dLVM\x2dxsk3Szp4tobNGQBmFevwBgCUJNPDOEcHSWbek23OodbJ7OPpxDhXqstnzg9McBMu.device loaded active plugged /dev/disk/by-id/dm-uuid-LVM-xsk3Szp4tobNGQBmFevwBgCUJNPDOEcHSWbek23OodbJ7OPpxDhXqstnzg9McBMu
    dev-disk-by\x2did-wwn\x2d0x5000cca614c10a6e.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2did-wwn\x2d0x5000cca614c10a6e\x2dpart1.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2did-wwn\x2d0x5000cca614c10a6e\x2dpart2.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2did-wwn\x2d0x5000cca614c10a6e\x2dpart4.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2dlabel-home.device loaded active plugged /dev/disk/by-label/home
    dev-disk-by\x2dlabel-SAMSUNG_REC.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2duuid-15fbcf03\x2d3252\x2d42d5\x2da3d7\x2d8e1e37664acb.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2duuid-1a803ea9\x2d3133\x2d419d\x2dbdbe\x2dfaa4f14eb5e2.device loaded active plugged /dev/disk/by-uuid/1a803ea9-3133-419d-bdbe-faa4f14eb5e2
    dev-disk-by\x2duuid-21dcbbd0\x2d7169\x2d4a71\x2d8e3a\x2d795063b5a7c2.device loaded active plugged /dev/disk/by-uuid/21dcbbd0-7169-4a71-8e3a-795063b5a7c2
    dev-disk-by\x2duuid-62c3663f\x2d56e2\x2d428e\x2da5a1\x2d6c3fe709d76c.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2duuid-8A86585F86584DB7.device loaded active plugged Hitachi_HTS543225A7A384
    dev-disk-by\x2duuid-ecad22ff\x2d1934\x2d45c5\x2d9059\x2d74476b69542a.device loaded active plugged /dev/disk/by-uuid/ecad22ff-1934-45c5-9059-74476b69542a
    dev-dm\x2d0.device loaded active plugged /dev/dm-0
    dev-dm\x2d1.device loaded active plugged /dev/dm-1
    dev-dm\x2d2.device loaded active plugged /dev/dm-2
    dev-dm\x2d3.device loaded active plugged /dev/dm-3
    dev-mapper-cryptpool.device loaded active plugged /dev/mapper/cryptpool
    dev-mapper-cryptpool\x2dcrypthome.device loaded active plugged /dev/mapper/cryptpool-crypthome
    dev-mapper-cryptpool\x2dcryptroot.device loaded active plugged /dev/mapper/cryptpool-cryptroot
    dev-mapper-cryptpool\x2dcryptswap.device loaded active plugged /dev/mapper/cryptpool-cryptswap
    dev-sda.device loaded active plugged Hitachi_HTS543225A7A384
    dev-sda1.device loaded active plugged Hitachi_HTS543225A7A384
    dev-sda2.device loaded active plugged Hitachi_HTS543225A7A384
    dev-sda4.device loaded active plugged Hitachi_HTS543225A7A384
    dev-ttyS0.device loaded active plugged /dev/ttyS0
    dev-ttyS1.device loaded active plugged /dev/ttyS1
    dev-ttyS2.device loaded active plugged /dev/ttyS2
    dev-ttyS3.device loaded active plugged /dev/ttyS3
    sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged NM10/ICH7 Family High Definition Audio Controller
    sys-devices-pci0000:00-0000:00:1c.0-0000:05:00.0-bcma0:0-net-wlp5s0.device loaded active plugged BCM4313 802.11bgn Wireless Network Adapter
    sys-devices-pci0000:00-0000:00:1c.2-0000:09:00.0-net-enp9s0.device loaded active plugged 88E8040 PCI-E Fast Ethernet Controller
    sys-devices-pci0000:00-0000:00:1d.1-usb3-3\x2d2-3\x2d2:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/bluetooth/hci0
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged Hitachi_HTS543225A7A384
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged Hitachi_HTS543225A7A384
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged Hitachi_HTS543225A7A384
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged Hitachi_HTS543225A7A384
    sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
    sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-devices-virtual-block-dm\x2d0.device loaded active plugged /sys/devices/virtual/block/dm-0
    sys-devices-virtual-block-dm\x2d1.device loaded active plugged /sys/devices/virtual/block/dm-1
    sys-devices-virtual-block-dm\x2d2.device loaded active plugged /sys/devices/virtual/block/dm-2
    sys-devices-virtual-block-dm\x2d3.device loaded active plugged /sys/devices/virtual/block/dm-3
    sys-module-configfs.device loaded active plugged /sys/module/configfs
    sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
    sys-subsystem-net-devices-enp9s0.device loaded active plugged 88E8040 PCI-E Fast Ethernet Controller
    sys-subsystem-net-devices-wlp5s0.device loaded active plugged BCM4313 802.11bgn Wireless Network Adapter
    -.mount loaded active mounted /
    boot.mount loaded active mounted /boot
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    home.mount loaded active mounted /home
    proc-sys-fs-binfmt_misc.mount loaded inactive dead Arbitrary Executable File Formats File System
    sys-fs-fuse-connections.mount loaded inactive dead FUSE Control File System
    sys-kernel-config.mount loaded active mounted Configuration File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted Temporary Directory
    systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
    systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    session-1.scope loaded active running Session 1 of user paul
    alsa-restore.service loaded inactive dead Restore Sound Card State
    alsa-state.service loaded inactive dead Manage Sound Card State (restore and store)
    alsa-store.service loaded inactive dead Store Sound Card State
    auditd.service not-found inactive dead auditd.service
    dbus.service loaded active running D-Bus System Message Bus
    dmeventd.service loaded inactive dead Device-mapper event daemon
    emergency.service loaded inactive dead Emergency Shell
    [email protected] loaded inactive dead Getty on tty1
    kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
    lvmetad.service loaded active running LVM2 metadata daemon
    lxdm.service loaded active running LXDE Display Manager
    mkinitcpio-generate-shutdown-ramfs.service loaded inactive dead Generate shutdown-ramfs
    [email protected] loaded failed failed Automatic wireless network connection using netctl profiles
    [email protected] loaded active running Automatic wired network connection using netctl profiles
    netctl.service loaded inactive dead (Re)store the netctl profile state
    netctl@wlp5s0\x2dzuHause.service loaded active exited Automatically generated profile by wifi-menu
    ntpd.service loaded active running Network Time Service
    plymouth-quit-wait.service not-found inactive dead plymouth-quit-wait.service
    plymouth-quit.service not-found inactive dead plymouth-quit.service
    plymouth-start.service not-found inactive dead plymouth-start.service
    polkit.service loaded active running Authorization Manager
    rescue.service loaded inactive dead Rescue Shell
    syslog.service not-found inactive dead syslog.service
    systemd-ask-password-console.service loaded inactive dead Dispatch Password Requests to Console
    systemd-ask-password-wall.service loaded inactive dead Forward Password Requests to Wall
    systemd-binfmt.service loaded inactive dead Set Up Additional Binary Formats
    systemd-fsck-root.service loaded active exited File System Check on Root Device
    systemd-fsck@dev-disk-by\x2duuid-21dcbbd0\x2d7169\x2d4a71\x2d8e3a\x2d795063b5a7c2.service loaded active exited File System Check on /dev/disk/by-uuid/21dcbbd0-7169-4a71-8e3a-795063b5a7c2
    systemd-fsck@dev-disk-by\x2duuid-62c3663f\x2d56e2\x2d428e\x2da5a1\x2d6c3fe709d76c.service loaded active exited File System Check on /dev/disk/by-uuid/62c3663f-56e2-428e-a5a1-6c3fe709d76c
    systemd-initctl.service loaded inactive dead /dev/initctl Compatibility Daemon
    systemd-journal-flush.service loaded inactive dead Trigger Flushing of Journal to Persistent Storage
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-modules-load.service loaded inactive dead Load Kernel Modules
    systemd-random-seed.service loaded active exited Load/Save Random Seed
    systemd-readahead-collect.service loaded inactive dead Collect Read-Ahead Data
    systemd-readahead-done.service loaded inactive dead Stop Read-Ahead Data Collection
    systemd-readahead-replay.service loaded inactive dead Replay Read-Ahead Data
    systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
    systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-tmpfiles-clean.service loaded inactive dead Cleanup of Temporary Directories
    systemd-tmpfiles-setup-dev.service loaded active exited Create static device nodes in /dev
    systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
    systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
    systemd-user-sessions.service loaded active exited Permit User Sessions
    systemd-vconsole-setup.service loaded active exited Setup Virtual Console
    upower.service loaded active running Daemon for power management
    [email protected] loaded active running User Manager for 1000
    -.slice loaded active active Root Slice
    system-getty.slice loaded active active system-getty.slice
    system-netctl.slice loaded active active system-netctl.slice
    system-netctl\x2dauto.slice loaded active active system-netctl\x2dauto.slice
    system-netctl\x2difplugd.slice loaded active active system-netctl\x2difplugd.slice
    system-systemd\x2dfsck.slice loaded inactive dead system-systemd\x2dfsck.slice
    system.slice loaded active active System Slice
    user-1000.slice loaded active active user-1000.slice
    user.slice loaded active active User and Session Slice
    dbus.socket loaded active running D-Bus System Message Bus Socket
    dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
    lvmetad.socket loaded active running LVM2 metadata daemon socket
    syslog.socket loaded inactive dead Syslog Socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-udevd-control.socket loaded active running udev Control Socket
    systemd-udevd-kernel.socket loaded active running udev Kernel Socket
    dev-cryptpool-cryptswap.swap loaded active active /dev/cryptpool/cryptswap
    dev-disk-by\x2did-dm\x2dname\x2dcryptpool\x2dcryptswap.swap loaded active active /dev/disk/by-id/dm-name-cryptpool-cryptswap
    dev-disk-by\x2did-dm\x2duuid\x2dLVM\x2dxsk3Szp4tobNGQBmFevwBgCUJNPDOEcHllDB1ZzWo40r3U5Lw7ZcpitGvQNRge12.swap loaded active active /dev/disk/by-id/dm-uuid-LVM-xsk3Szp4tobNGQBmFevwBgCUJNPDOEcHllDB1ZzWo40r3U5Lw7ZcpitGvQNRge12
    dev-disk-by\x2duuid-ecad22ff\x2d1934\x2d45c5\x2d9059\x2d74476b69542a.swap loaded active active /dev/disk/by-uuid/ecad22ff-1934-45c5-9059-74476b69542a
    dev-dm\x2d2.swap loaded active active /dev/dm-2
    dev-mapper-cryptpool\x2dcryptswap.swap loaded active active /dev/mapper/cryptpool-cryptswap
    basic.target loaded active active Basic System
    bluetooth.target loaded active active Bluetooth
    cryptsetup.target loaded active active Encrypted Volumes
    emergency.target loaded inactive dead Emergency Mode
    getty.target loaded active active Login Prompts
    graphical.target loaded active active Graphical Interface
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User System
    network.target loaded active active Network
    nss-lookup.target loaded inactive dead Host and Network Name Lookups
    nss-user-lookup.target loaded inactive dead User and Group Name Lookups
    paths.target loaded active active Paths
    remote-fs-pre.target loaded inactive dead Remote File Systems (Pre)
    remote-fs.target loaded active active Remote File Systems
    rescue.target loaded inactive dead Rescue Mode
    shutdown.target loaded inactive dead Shutdown
    slices.target loaded active active Slices
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    syslog.target not-found inactive dead syslog.target
    timers.target loaded active active Timers
    umount.target loaded inactive dead Unmount All Filesystems
    systemd-readahead-done.timer loaded inactive dead Stop Read-Ahead Data Collection 10s After Completed Startup
    systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    179 loaded units listed.
    To show all installed unit files use 'systemctl list-unit-files'.
    My ~/.config/lxsession/LXDE/autostart:
    ~/.config/lxsession/LXDE/autostart
    @pcmanfm --desktop --profile LXDE
    @xscreensaver -no-splash
    My ~/.xprofile:
    ~/.xprofile
    xcompmgr -c -C -t-5 -l-5 -r4.2 -o.55 -f
    Besides that there are some files which I didn't change. I'll show you the content if necessary:
    /etc/X11/xinit/xinitrc.d/30-dbus
    /etc/xdg/autostart/at-spi-dbus-bus.desktop
    /etc/xdg/autostart/gsettings-data-convert.desktop
    /etc/xdg/autostart/parcellite-startup.desktop
    /etc/xdg/autostart/zeitgeist-datahub.desktop
    ~/.config/autostart/cairo-dock.desktop
    Steef435 wrote:I think we can agree that your keys aren't out of order, but the reaction to the keypress isn't what you expect it to be.
    Absolutely.
    Steff435 wrote:What do you mean with "the text I'm just typing"? You can't move the text cursor in the textbox in your browser using the keys?
    Yes, exactly.
    Steff432 wrote:I don't use lxdm, but I guess that doesn't use the default Gtk text entry widget, while most Gtk-based browsers as far as I know do, so it might be related to Gtk in some way. Or do you use a Qt browser? Have you tried the keys in non-Gtk software?
    I use firefox which is, as far as I know, Gtk-based. But I installed QupZilla and gabe it a try. Unfortunatelly the same error shows up there.
    I don't know if I'm right but lxde should be gtk-based itself and running a non-Gtk software in gtk-based lxde would show up the same gtk-errors to, wouldn't it? So eventually I'd have to try a non-Gtk software in a non-Gtk desktop environment in order to check whether the error doesn't show up under non-gtk software?
    Steff432 wrote:What output does xev give you?
    For the left arrow key it gets me:
    FocusOut event, serial 44, synthetic NO, window 0x2200001,
    mode NotifyGrab, detail NotifyAncestor
    FocusIn event, serial 44, synthetic NO, window 0x2200001,
    mode NotifyUngrab, detail NotifyAncestor
    KeymapNotify event, serial 44, synthetic NO, window 0x0,
    keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    KeyRelease event, serial 44, synthetic NO, window 0x2200001,
    root 0x7c, subw 0x0, time 2918840, (170,-16), root:(171,70),
    state 0x2000, keycode 113 (keysym 0x1008ff12, XF86AudioMute), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False
    For the right arrow key it gets me:
    KeyPress event, serial 44, synthetic NO, window 0x2200001,
    root 0x7c, subw 0x0, time 2726871, (809,193), root:(810,279),
    state 0x2000, keycode 114 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES,
    XLookupString gives 0 bytes:
    XmbLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyRelease event, serial 47, synthetic NO, window 0x2200001,
    root 0x7c, subw 0x0, time 2727006, (809,193), root:(810,279),
    state 0x2000, keycode 114 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False
    Marry Xmas by the way. :-)

  • Left and right arrow keys don't work

    My right and left arrow keys do not work, up and down arrows work fine.  I did not spill anything on or near my keyboard.  I don't recall adding any apps/software.  It is a late 2008 MacBook Pro running OS X10.9.1.  I am at a loss.  Please help.
    Thanks,
    David

    Call 1-800-SOS-APPL. If it needs hardware repair, they will send you a box to ship it in for service. Turnaround time is usually just a few days.
    You might try an Archive and Install first to eliminate a software issue. Apple will have you do that anyway.
    Mac OS X: About the Archive and Install feature >>
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • How do I browse through pictures (in open state) using arrow keys

    Hi all. I know this is a lame question. But I am new to Mac. How do we navigate through photos in open mode. I mean usually in Windows, we open one picture and use arrow keys to navigate between photos.What are the keys I can use to navigate between photos. As of now, I have to close the photo and then double tap on another to view it. Thanks.

    What application are you using? In iPhoto you can just use the right and left arrow keys to browse photos...
    Clinton

  • Using the arrow keys to move objects in photoshop issue

    When I move objects around in Photoshop using the arrow keys something odd to me happens.  When I press the left arrow key it seems to move 2 pixels then when I press the right arrow key it seems like it moves 1 pixel.  I noticed this when I had 3 objects.  One was centered and I wanted to move both the other objects 20 pixels away.  One looked twice as far away.  I looked closer and I found out that was the problem.  This also happens when using the up and down arrow keys.  Is that supposed to happen and is there a way to fix it? Thanks

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • CTI Doesn't Move with Arrow Keys PE12

    I am running into a glitch in Premiere Elements 12. When I nudge the CTI (playhead) using the arrow keys it moves only 1 frame no matter how many times I press the over arrow. The audio continues to scrub and the time indicator continues to change for each frame, but the CTI itself is stuck and no longer represents the proper location.
    Anyone solved this?
    I am using a MacBook Pro running OS 10.8.5.

    Thanks ATR for you reply, here I will try to explain my findings.
    My hw. sw. setup
    MACBook Pro, OS X 10.9.4, 16Gb, licensed Premiere Elements 12.1 upgraded from 12.0
    Just to confirm....are you saying that if you do just a one tap on the right or left arrow key, the Timeline Indicator will move 1 frame.              YES (if slow repeat).
    But, if you hold down and continue to hold down on the right of the right or left arrow key, the Timeline Indicator will not go into a continuing movement?     YES.
    >> Today I have found that this problem only show up in ”Expert” edit mode and not in ”Quick” mode.
          1. Current Timeline Indicator (CTI) only move/jump one frame when I first start to hold right or left key pressed, after this first jump CTI will stop to move,
                my movie and time counter will move and count as expected.
          2. If I repeat pressing right or left key with a speed faster than one press per 3seconds the CTI will be stopped,  slower repeat than every 3 second then CTI will move on every key press.  
          3. Note1   when CTI not move during continue key press or fast repeat R/L (< 3sec) the accumulated new CLI position will show up as a long jump on next press after 3sec paus.  
          4. Note2   I have also verifies with my Win7 friend with a new installed PE 12.1 running just fine without this CTI problem.  (MAC version only??)
    If so, several things that I would like you to do if you have not already....
    1. Delete the Adobe Premiere Elements Prefs file which should be found
        Users\Libraries\Application Support\Adobe\Premiere Elements\12
    >> After I delete the Adobe Premiere Elements Prefs file I did restart PE12 program and created  a new project ( an new PE Prefs was automatic create in the same directory as expected)
          But unfortunately my problem is still there.  
    2. In the opened project, go to Edit Menu/Preferences/General and experiment with the Timeline Playback Auto-Scrolling Options (No Scroll, Page Scroll, and Smooth Scroll).
    ATR Premiere Elements Troubleshooting: PE12/12.1: Timeline Playback Auto-Scrolling
    >> Thanks, here I found lot of good reading but your suggestion to change the Timeline Playback Auto-Scrolling Options did change scrolling behavior,
           unfortunately my problem is still there. 
    I am strictly an Elements Windows user, so please double check the translation of the suggested locations from Windows to Mac.
    How would describe your issue - "it worked before but not now" or "it never worked before".
    >> My best answer must be;  I have not seen this problem before but I´m trying to learn video editing so I could have missed the CTI behavior.
    Looking forward to your follow up.
    Thank you.
    Add On...Like the originator of this thread, are you working with a tryout of Premiere Elements 12/12.1?
    No this is a licensed version 12.0 upgraded to 12.1
    Summary:
    My conclusion must be that this CTI behavior is a software bug  (maybe only in MAC versionPE12 or in  some combination).
    How to fix my problem:
    Will a reinstall likely fix the problem?
    Or is´t a case for Adobe Support to handle? 
    I´m happy for any help here.
    Regards.
    Per

  • Make num keys function as arrow keys

    my left arrow key is not working so i'm wondering if there's a way to make my number keys function as arrow keys. i'm using an apple keyboard with numeric keypad on os x 10.6.8 (late 2009 imac)
    thanks

    Laptops map the keyboard differently as they are also
    using the F1-F12 keys to control screen brightness,
    speakers, etc. To access FCP specific uses, you need
    to hold down the FN key in the lower left as a
    modifer.
    Since this a pain in the butt you may want to do
    this:
    Open up System Preferences
    select Keyboard & Mouse
    select the Keyboard item on the bar
    click on "Use the F1-F12 keys for custom actions"
    close.
    This should return your function keys to 'normal'
    operation. Now if you want to brighten or dim your
    screen, hold down the FN key (lower left of the
    keyboard) to modify the F# key.
    good luck.
    x
    Thanks a lot! This resolved the problem!
    I appreciate all the time you people are putting in helping me and others

Maybe you are looking for

  • Doubt in UPDATE Statement

    Hi, I need to update all values in 2 columns (Net_Quantity) and (Net_Amount) based on join condition with the another table in plsql block. Query which i tried UPDATE TFS_FRCST_TOOL_LINES SET NET_ORDERS_QTY=l_net_orders_qty and NET_AMOUNT=l_net_amoun

  • How to export to excel and format and send email?

    Hi all, I have an sql query that i need to run daily. My question is: how can i create a procedure to export the query result to an excel file with font Arial size 9 with all columns streched for best fit and also sent-it via email with subject and e

  • Strange audio issue when running render queue via script.

    The issue I'm having with AE is odd, and I'm hoping someone may be able to shed light on the matter.  I have a very simple composition that, when I render out using the GUI, everything works as expected.  The video renders fine, the audio renders fin

  • How to update host username/password in RMAN - 10g Enterprise manager bkp

    Hi, We have RMAN - 10g Enterprise manager scheduled. Last week we changed OS - Oracle password. Now backups are failing. Please let me know where to update Host username/password details in 10g Enterprise manager...

  • Create anchor on "intersection" not working, is always off

    When I use the new anchor tool to create a new point on an intersection, it is never EXACTLY on the intersecting section, but off by a little bit. Sure, I could manually edit the anchor, but the time spent doing this many times over adds up and a sli