Length of message received from JTAPI Gateway (805306376) exceeds maximum (65535)

Hi Im getting following error from PG Server,Can you please explain what does it mean ?
Protocol Error. Length of message received from JTAPI Gateway (805306376) exceeds maximum (65535).
Fail: sendMsg: MessageType: 30 GWMSG.Message Total Length (127) != raw byte stream length (109)

I think you seee this message in the PIM process, PIM have identified that the message sent by JGW is invalid and length have exceeded.
On what call scenario you got this message ? Did you have the PIM failover occured during this event.
Just have a look at this defect CSCte23397 as well
Regards,
Senthil

Similar Messages

SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
on IE to go to the previous page. Then it catch the error as:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.
I am using SQL2012 and Sharpoint2013.

Hi Alisa,
Thanks for your reply, I changed the web.config, but the issue did not resolved.
I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
This issue can not reproduce on Chrome only occur on IE.
So, do you have some details suggestion for me to fix it?
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<configuration>
<configSections>
<sectionGroup name="SharePoint">
</sectionGroup>
<location path="_layouts/15/TA_AppMonitoringDetails.aspx">
<appSettings>
<add key="ChartImageHandler" value="storage=memory;timeout=20" />
</appSettings>
</location>
<location path="_layouts/15/ReportServer/RSViewerPage.aspx">
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
</appSettings>
</location>
<system.net>
<defaultProxy />
</system.net>
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
<add key="aspnet:RestrictXmlControls" value="true" />
<add key="FeedCacheTime" value="300" />
<add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
<add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
<add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
</appSettings>

HT5312 How do I receive rescue email - I have exceeded maximum attempts

How do I receive rescue email - I have exceeded maximum attempts
I have this message:
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.

If there's an option on that message to have it sent to you, use it, wait a few hours, and check the spam filter. If not or it doesn't work, you need to contact Apple, either through the link in that article or by phoning them.
(79307)

Help needed with message received from BAPI_BUPA_FS_CREATE_FROM_DATA2

Hi experts,
I'm creating Business Partners(type Organisation) using BAPI_BUPA_FS_CREATE_FROM_DATA2, however, I receive an error message from the BAPI return table that I don't understand. The message is "Data set BUT100 for BP 0000000108 maintained time-dependently,despite inact.time dep."..... can anyone help please?
Thanks in advance,
Chris

Implement note
Note 1691224 - HRALX: Error message R11 349 when creating BP for org.unit

Problem reading JMS message received from MQSeries

I have a message listener listening on an MQSeries queue.
I'm expecting a text message back, but what I get is
partially listed below.
Any idee's to what I need to do would be greatly received.
thanks
JMS Message class: jms_bytes
JMSType: null
JMSDeliveryMode: 2
JMSExpiration: 0
JMSPriority: 0
JMSMessageID: ID:414d51205344454e44553031202020203dc7e0ff00223082
JMSTimestamp: 1038261667350
JMSCorrelationID:null
JMSDestination: null
JMSReplyTo: null
JMSRedelivered: false
JMSXDeliveryCount:1
JMS_IBM_MsgType:8
JMSXAppID:MQSeries Client for Java
JMS_IBM_Format:
JMS_IBM_Encoding:273
JMS_IBM_PutApplType:28
JMS_IBM_Character_Set:ISO8859_1
JMSXUserID:mqm
JMS_IBM_PutTime:22010735
JMS_IBM_PutDate:20021125
Integer encoding: 1, Floating point encoding 256
3c3f786d6c2076657273696f6e3d22312e302220656e636f64696e673d225554462d38223f3e3c52
65706c79437573746f6d65725374617475735f3030313e3c434e54524f4c415245413e3c4253523e

I have a temporary/partial solution to this problem.
As we control the application adapter that is posting messages to the MQSeries queue, we have changed the sender to put the text into the bytes message object using writeUTF rather than writeText that it was using. My reader the does a readUTF.

ERROR in Message receiving from mobile

hi,
m connecting my mobile(nokia 6270) with computer.all AT command works fine.but when i execute "AT+CNMI=0,0,0,0" command.then it give me ERROR.plz any one help me to slove this prob.due to this prob i can't receive msg of mobile on computer.
can any one help me?it's argent.
thanks in advance.

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Bad Messages only from one sender

Hello there,
i have a problem with mails from a specific sender. When the sender is sending mails without an attachment, then the mail is ok and the recipient will get it. But when the sender sends the mail with an attachment, then the mail will get as Bad Message to the Postmaster.
I think there is something wrong in the Header but i don't know what:
MAIL FROM:<[email protected]> SIZE=573007
RCPT TO:<[email protected]>
Received: from xxxxxxxx.xxxxxx.xxx ([xx.xx.xx.xx])
by xxxxxxxxxx.xx with ESMTP; Tue, 07 Jul 2009 11:52:34 +0200
X-IronPort-AV: E=Sophos;i="4.42,361,1243807200";
d="pdf'?png'150?scan'150,208,217,150";a="2721830 3"
Received: from mo-p00-ob.rzone.de ([81.169.146.161])
by xxxxxxxxxx.xxxxxx.xxx with ESMTP; 07 Jul 2009 11:52:33 +0200
DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; t=1246960352; l=571364;
s=domk; d=rhea-and-partner.biz;
h=Content-Type:MIME-Version:Date:Subject:Cc:To:From:X-RZG-CLASS-ID:
X-RZG-AUTH;
bh=aY6mjNsN0vqY2auMgf+alJPbvNA=;
b=hQXMz5BITbUSVrYtm41OzKNRkS9AZAouFo8ED/uzRP5bHmeNd23fg8whfT+qUxX31pi
m21D3KUC5Ovjch109Jzrty8Eq7jVExkqN6Nqs/aTq7Uia71BYxwPXN5I4Ekw0c7hgBF7r
42ZyYLu1/yh8wkrjMgUHCVR4TSZAHNLP5hM=
X-RZG-AUTH: :PH4Lf0Wrb6+6xL8EEXtEHc5gFqvY7xz0LT3kjfBINp1lhscXy ML+LucWtjC2jEzFsnMozhfBTmY=
X-RZG-CLASS-ID: mo00
Received: from WWWDE19A13C016 ([202.153.93.94])
by post.strato.de (fruni mo51) (RZmta 18.49)
with ESMTP id a04279l679XUiR ; Tue, 7 Jul 2009 11:52:06 +0200 (MEST)
From: "Leo Zhang - Rhea & Partner International Consultants Ltd." <[email protected]>
To: "'xxxxx xxxxxxx'" <[email protected]>
Cc: "'Ruediger W. Kuemmerle - Rhea & Partner International Consultants Ltd.'" <[email protected]>
Subject: Uebersendung erstes Angebot - 3250780 Swimming pool - fence 1003962
Date: Tue, 7 Jul 2009 17:57:19 +0800
Message-ID: <001c01c9fee9$52a5ea50$f7f1bef0$@biz>
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_NextPart_000_001D_01C9FF2C.60C92A50"
X-Mailer: Microsoft Office Outlook 12.0
Thread-Index: Acn+6QJn52YxFNPXTgCsrskIq43aXw==
Content-Language: zh-cn
X-AntiVirus: checked by AntiVir MailGuard (Version: 8.0.0.18; AVE: 8.2.0.204; VDF: 7.1.4.190)
This is a multipart message in MIME format.
------=_NextPart_000_001D_01C9FF2C.60C92A50
Content-Type: multipart/related;
boundary="----=_NextPart_001_001E_01C9FF2C.60C92A50"
------=_NextPart_001_001E_01C9FF2C.60C92A50
Content-Type: multipart/alternative;
boundary="----=_NextPart_002_001F_01C9FF2C.60C92A50"
------=_NextPart_002_001F_01C9FF2C.60C92A50
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
RESEND!
...following the mail text in HTML and then the attachment.
Maybe someone can see what the problem is. I talked to the sender and they told me that they have only with us these problems.
The GW Version is 7.0.3
Any ideas?
Thanks
Matthias

I've got the same problem with GW 7.0.3. The content, which was send to the Postmaster:
"Die Anlagedatei wurde vom Gateway empfangen, doch das Gateway konnte die Nachricht nicht verarbeiten."
or my free translation
"The attachted file was received from the gateway, but the gateway could not process the message."
The E-Mail had a pdf attachment. When I send a new external email from my personal freemail account with these problematic attachment to the firm, then the mail arrives.
Could the MIME-Type ISO-8859-1 be the problem?
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
I didn't found a solution in an other thread.
Originally Posted by Matthias123
Hello there,
i have a problem with mails from a specific sender. When the sender is sending mails without an attachment, then the mail is ok and the recipient will get it. But when the sender sends the mail with an attachment, then the mail will get as Bad Message to the Postmaster.
I think there is something wrong in the Header but i don't know what:
MAIL FROM:<[email protected]> SIZE=573007
RCPT TO:<[email protected]>
Received: from xxxxxxxx.xxxxxx.xxx ([xx.xx.xx.xx])
by xxxxxxxxxx.xx with ESMTP; Tue, 07 Jul 2009 11:52:34 +0200
X-IronPort-AV: E=Sophos;i="4.42,361,1243807200";
d="pdf'?png'150?scan'150,208,217,150";a="2721830 3"
Received: from mo-p00-ob.rzone.de ([81.169.146.161])
by xxxxxxxxxx.xxxxxx.xxx with ESMTP; 07 Jul 2009 11:52:33 +0200
DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; t=1246960352; l=571364;
s=domk; d=rhea-and-partner.biz;
h=Content-Type:MIME-Version:Date:Subject:Cc:To:From:X-RZG-CLASS-ID:
X-RZG-AUTH;
bh=aY6mjNsN0vqY2auMgf+alJPbvNA=;
b=hQXMz5BITbUSVrYtm41OzKNRkS9AZAouFo8ED/uzRP5bHmeNd23fg8whfT+qUxX31pi
m21D3KUC5Ovjch109Jzrty8Eq7jVExkqN6Nqs/aTq7Uia71BYxwPXN5I4Ekw0c7hgBF7r
42ZyYLu1/yh8wkrjMgUHCVR4TSZAHNLP5hM=
X-RZG-AUTH: :PH4Lf0Wrb6+6xL8EEXtEHc5gFqvY7xz0LT3kjfBINp1lhscXy ML+LucWtjC2jEzFsnMozhfBTmY=
X-RZG-CLASS-ID: mo00
Received: from WWWDE19A13C016 ([202.153.93.94])
by post.strato.de (fruni mo51) (RZmta 18.49)
with ESMTP id a04279l679XUiR ; Tue, 7 Jul 2009 11:52:06 +0200 (MEST)
From: "Leo Zhang - Rhea & Partner International Consultants Ltd." <[email protected]>
To: "'xxxxx xxxxxxx'" <[email protected]>
Cc: "'Ruediger W. Kuemmerle - Rhea & Partner International Consultants Ltd.'" <[email protected]>
Subject: Uebersendung erstes Angebot - 3250780 Swimming pool - fence 1003962
Date: Tue, 7 Jul 2009 17:57:19 +0800
Message-ID: <001c01c9fee9$52a5ea50$f7f1bef0$@biz>
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_NextPart_000_001D_01C9FF2C.60C92A50"
X-Mailer: Microsoft Office Outlook 12.0
Thread-Index: Acn+6QJn52YxFNPXTgCsrskIq43aXw==
Content-Language: zh-cn
X-AntiVirus: checked by AntiVir MailGuard (Version: 8.0.0.18; AVE: 8.2.0.204; VDF: 7.1.4.190)
This is a multipart message in MIME format.
------=_NextPart_000_001D_01C9FF2C.60C92A50
Content-Type: multipart/related;
boundary="----=_NextPart_001_001E_01C9FF2C.60C92A50"
------=_NextPart_001_001E_01C9FF2C.60C92A50
Content-Type: multipart/alternative;
boundary="----=_NextPart_002_001F_01C9FF2C.60C92A50"
------=_NextPart_002_001F_01C9FF2C.60C92A50
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
RESEND!
...following the mail text in HTML and then the attachment.
Maybe someone can see what the problem is. I talked to the sender and they told me that they have only with us these problems.
The GW Version is 7.0.3
Any ideas?
Thanks
Matthias

Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System

Dears,
I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
==========================================================================================
**** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
Error: >Mon Jul 14 11:20:24,636<    RfcException: [null]
    message: Connect from SAP gateway to RFC server failed
Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
LOCATION    SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
ERROR       hostname 'cpe1601' unknown
TIME        Mon Jul 14 16:20:25 2014
RELEASE     740
COMPONENT   NI (network interface)
VERSION     40
RC          -2
MODULE      /bas/740_REL/src/base/ni/nixxhl.cpp
LINE        193
DETAIL      NiHLGetNodeAddr: hostname cached as unknown
COUNTER     3
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
==========================================================================================
This problem happens when my app executes the line:
JCoServer myServer = JCoServerFactory.getServer(myServerName);
My system properties:
jco.client.lang=EN
jco.destination.peak_limit=10
jco.client.client=800
jco.client.passwd=********
jco.client.user=********
jco.client.sysnr=01
jco.destination.pool_capacity=3
jco.client.ashost=/H/155.56.49.28/H/cpe1601
jco.server.connection_count=3
jco.server.gwhost=/H/155.56.49.28/H/cpe1601
jco.server.progid=VSPAGUE
jco.server.gwserv=sapgw01
jco.server.repository_destination=VSPAGUE
Using SAP Logon i can connect to server cpe1601 system E16 without problems.
Please, I really need some help, because my knowledge on SAP platform is minimum.

Hi Markus,
Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
As you could see, the host I'm connecting is from SAP RAC Service.
Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
System Connection Parameters
Description: SAP ECC 6.0
Application Server: cpe1601
Instance Number: 01
System ID: E16
SAProuter String: /H/155.56.49.28/H/
Below the connection information I received from SAP RAC SUPPORT for testing purposes:
    E16 System:
    SID: E16
    Client: 800
    System Number: 01
    Server: cpe1601
    Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
    User: ********
   Password: ********
   SAProuter String:
   If you don't plan to use SAPRouter at your end,
   /H/155.56.49.28/H/

Error Message received when trying to edit page

I have received this following message when trying to edit a site page in SharePoint or in SharePoint designer. I haven't ever seen this error message before and am not really sure what the issue is. I am not the owner of this
particular site but merely an owner of a specific page on this site so I am limited in my ability to troubleshoot but the actual owner is stuck on what the potential issue is and how to resolve this. I manage and own three seperate sites myself and have never
seen this issue so I am trying to assist in any way I can. Any ideas whats the issue?
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(),response filters, HttpModules,
or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.

Hi,
We need more information of the issue page. As suggested by Mokhtar, you could check if the issue is related to permission.
The issue might also occurs to the page which is developed based Ajax registration. Then it might be caused by AAM configuration.
And you could also refer to the link below if the issue is related to SSRS:
http://blogs.msdn.com/b/sowmyancs/archive/2012/07/10/ssrs-javascript-error-sharepoint-sql-reporting-services.aspx
Regards,
Rebecca Tu
TechNet Community Support

Connect from SAP gateway to RFC server failed

Good day and a happy new year to you all!
I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
>>>>>Start<<<<<<<<<<
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
LOCATION    SAP-Gateway on host bwsys / sapgw02
ERROR       timeout during allocate
TIME        Sat Dec 31 13:16:19 2005
RELEASE     640
COMPONENT   SAP-Gateway
VERSION     2
RC          242
MODULE      gwr3cpic.c
LINE        1785
DETAIL      no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
COUNTER     2
>>>>>>>>>END<<<<<<<<<<<<
I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
What could be wrong or missing in my configuration?
Regards,
Joao.

hi Joao,
check if oss note 447882 relevant
you may ask basis for help
Symptom
You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
Other terms
SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
Reason and Prerequisites
The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
Solution
Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.

Does messaging to/from iPhone to/from iPhone/iPad/iPod Touch count as a text charge for Verizon?

My dad has an iPad 2 and my little brother has an iPod Touch (4th generation). As long as there is a Wi-Fi signal, they are able to message, Facetime, and use the internet all for "free" (no extra charges from our internet service provider, which is obvious).
My dad recently purchased an iPhone 4S from Verizon.
He is currently on the "Pay As You Go" plan for messages ($0.20/text and $0.25/picture and video).
When are messages free, and when are they not free? Are they free as long as there is a Wi-Fi signal? Are they free as long as it is from the iPhone to another iPhone/iPad/iPod Touch? Do I get charged for data only when I see the "3G" symbol displayed in the upper left corner of the iPhone?
Thanks in advance!

I then turned Wi-Fi off on the iPhone 4S but had "Send as SMS" turned on, tried sending another message to the Touch (Wi-Fi activated), and it did not send at all (because the Touch is SMS-incapable).
That sort of makes sense, but even with wi-fi off the 4S should have been able to send the iMessage over 3G to the Touch, which was on wi-fi. Your results would only make sense if the 4S didn't have 3G service, or if the iMessage servers were down, or if you've turned iMessage off completely on the 4S. That would force the message to go out as SMS but the Touch can't receive SMS.
Sorry, I was a bit unclear there.
I had both Wi-Fi and Cellular Data (3G) turned off to see if "Send as SMS" alone would work if I was sending a message to an SMS-incapable device (to see if the iPhone would try anyway and to see if I would get charged for that).
I'll type out some scenarios, and tell me if I'm wrong on these. They might seem redundant since you have pretty much answered all my questions, but I want to make absolutely sure that I understand. These could also clear things up for others who will/have read this discussion.
Scenarios involving iPhone 4S to iPod Touch (both running iOS 5):
4S has Wi-Fi, 3G, and "Send as SMS" turned on. Touch has Wi-Fi turned on.
4S can iMessage to Touch via Wi-Fi (as long as there is a Wi-Fi signal) free of charge and will remain free of charge and with no accrued data usage because 4S prioritizes Wi-Fi before 3G before SMS.
Once out of range of the Wi-Fi signal, 3G kicks in and any iMessages sent from 4S to Touch will count towards data plan usage (in my dad's case, 300MB/$20 per month - the minimum plan). However, data size will be insignificantly small if it's a simple words-only message and will only be a fraction of a percentage of the 300 MB.
My dad turns off Cellular Data (3G), Wi-Fi is still out of range, and he sends a message (keep in mind that "Send as SMS" is still turned on). Because the Touch is not capable of sending/receiving SMS messages, the message will just fail to send.
These scenarios would also have the same outcome if the Touch had been a Wi-Fi-only iPad. If the iPad had 3G capability, the message received from the 4S would have added towards the data plan usage of the iPad.
Scenarios involving iPhone 4S to another iPhone (both running iOS 5):
Both phones have Wi-Fi, 3G, and "Send as SMS" turned on. Messaging plan for each phone is "Pay as You Go" - $0.20/text and $0.25/picture or video.
iMessages are free and do not count towards data plan usage if both currently have strong Wi-Fi signals.
4S still has strong Wi-Fi signal, other iPhone gets out of Wi-Fi range and switches to 3G. Any messages received by the other iPhone from the 4S will count towards data plan usage of the other iPhone. However, the outgoing message from the 4S will still be free and will not count towards data plan usage.
Other iPhone turns off 3G and is still out of Wi-Fi range but still has "Send as SMS" turned on. 4S (with strong Wi-Fi signal) sends message, "I love you." to other iPhone. The message will still be free and will not count towards data plan usage for 4S but will charge $0.20 to other iPhone.
Scenario involving iPhone 4S to Samsung Galaxy 2 (running Android OS):
4S has Wi-Fi, 3G, and "Send as SMS" turned on.
Any message sent from 4S to Galaxy will count as SMS because Galaxy is incapable of iMessage. Therefore, Wi-Fi and 3G are insignificant, and 4S is charged $0.20.
4S has Wi-Fi, 3G, and "Send as SMS" turned off.
4S will not be capable of sending anything.
4S has Wi-Fi and 3G turned on, but "Send as SMS" is turned off.
4S has strong Wi-Fi signal, but message will not be sent to Galaxy.
4S gets out of Wi-Fi range and 3G kicks in, but message will not be sent to Galaxy and no data usage will have occurred.
That should be everything...at least everything I've considered.
Again, thank you.

How do you change the Received: From in the message header to correct external address

We have trouble every so often sending a message to customers will get a bounce back. Basically it is using our local internal name (mailserver.local) instead of our External name (mail.domain.com). We have a pretty
simple setup one Server (no edge server) with and SSL certificate. I went in to the Hub Transport setting and made sure the FQDN was mail.domain.com and it was. I have read on the subject some people suggest getting your ISP to create a pointer
record for the IP to the internal name. That will not work for us, because we may be changing ISPs in the near future.
I included a bounce and current header info.
So is there a way to change the "Received: from" server name to our external name?
Bounce Message
Generating server: mailserver.local
[email protected] TUK-UTM.theirdomain.com #550 Invalid RDNS entry for 96.43.XX.XX ##
Message headers
Received: from mailserver.local ([::1]) by
mailserver.local ([::1]) with mapi id 14.01.0438.000; Fri, 9 Jan
2015 11:35:19 -0600
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: test1 <[email protected]>
To: test2 <[email protected]>
Subject: test 2
Thread-Topic: test 2
Thread-Index: AdAsMp9XJVDQap4vSC6OcUEejnFNCw==
Date: Fri, 9 Jan 2015 11:35:18 -0600
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-Exchange-Organization-SCL: -1
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-MS-Exchange-Organization-AuthSource: mailserver.local
X-MS-Exchange-Organization-AuthAs: Internal
X-MS-Exchange-Organization-AuthMechanism: 04
X-Originating-IP: [192.168.XX.XX]

The error message states the reverse DNS entry isn't valid. I agree with Willard that setting up an SPF record will help your overall spam score from receiving hosts, but in this case it should simply be resolved by configuring a reverse DNS.
Receiving mail hosts on the Internet usually care most about the IP that's connecting to them. One of the most common tests is the reverse DNS (since the SMTP connection comes from 96.43.X.X, the receiving host will ask itself "does 96.43.X.X really
belong to the TUK-UTM.theirdomain.com ? and will go and check for PTR records for 96.43.X.X) It's this check that's failed.
Even if you'll be changing your ISP in the future, you would still have ownership for your DNS domains, right ? It should be your company paying for this service after all.

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
        Mockery context = new Mockery();
        final MessageListener messageListener = context.mock(MessageListener.class);
        final Latch latch = new LatchImpl();
        final String prefix = "test" + System.currentTimeMillis();
        context.checking(new Expectations() {
                oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                will(new CustomAction("release latch") {
                    @Override
                    public Object invoke(Invocation invocation) throws Throwable {
                        latch.unlatch();
                        return null;
        final Connection connection = createConnection(null, null);
        Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection.start();
        Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
        Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
        final MessageConsumer consumer = session.createConsumer(wildcardTopic);
        consumer.setMessageListener(messageListener);
        MessageProducer producer = session.createProducer(null);
        producer.send(destination, session.createTextMessage("MSG1"));
        latch.await(5000);
        connection.close();
        Thread.sleep(5);
        context.assertIsSatisfied();

Check where your MDB sends the [response] messages to.

Encrypting Message / Payload received from DB Procedure - DBAdapter

Hi,
Im trying to encrypt the message returned from DBAdapter.
My scenario is
1) Get User details from thridparty application
2) Pass the details to DB Procedure (Using DBAdapter here)
2) DB procedure creates user and send back its password in plain text.
(Here i want to encrypt the Password, so that its hidden from Audit trail)
3)SOA Takes the password and sends to another SOA Server2
4) SOA Service2 decrypts the password and send it in EMAIL Notification to user
(Here i want to decrypt the password)
Is there any way to achieve this ?? I tried some partial message encryption code given by Oracle, but i need to apply it for DBAdapter .
Shirish

ChakravarthyDBA wrote:
Hi
I have two procedures which need to run one by one based time scheduled in table and I need to pass the parameters from database table for these procedures which is received from asp.net application then I need to update the procedure status to the same table as 'Schedule','Running','Error' when I got Error I need to store the error message to the table.
Please help me on this.
Edited by: ChakravarthyDBA on Mar 8, 2013 11:20 AMHello
Issue related to {forum:id=75} forum. Close this thread marking as answered and ask their.
hope this helps

Profile with 2 Exchange accounts - Message received and recalled in one account is notified as recalled even from other account

When 2 exchange accounts are active on the same profile (e.g. Company A and Company B), and a message is received to one of the two account (e.g. internal mail in Company A), notification of recall is sent even from the second profile (Company B).
Therefore message sender from Company A is notified that message was sent even to an account of Company B, that can be a compliance issue regarding Client Data Protection when messages cannot be sent outside Company A.
This behaviour is not correct and should be solved, could you please check and solve the program bug?
Microsoft Office Professional Plus 2010 - Microsoft Outlook 14.0.7106.5003 (32-bit)

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Length of message received from JTAPI Gateway (805306376) exceeds maximum (65535)

Similar Messages

Maybe you are looking for