Lenovo Flex 10 touchscreen stops working after 1 hour of use.

Just bought a new Lenovo Flex 10 from a retail and it works perfectly except that after an hour of use the touchscreen stops working, the computer still works ok, but only with the mousepad. The notebook came with Windows 8.1, and I haven't installed any program on it. I need an urgent response please, since i've been looking for days in the community and other support pages, and still can't get a satisfactory answer and the period to get the a refund are about to expire.
Thanks in advance.

hi riglesias,
Welcome to the Lenovo Forums.
Once the Touchscreen stops responding, can you check the following:
1. Open System Properties and see if the Touch functionality is still there
- Link to picture (Touchscreen feature is not detected)
- Link to picture (Touchscreen feature is detected)
If the Touchscreen feature is detected, proceed to Step 2.
2. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, navigate to the Human Interface Devices section and uninstall anything that says HID-compliant device (this is the driver that controls the touchscreen). When finished, reboot the system and observe.
3. If the Touchscreen is still not working, hold the Shift Key and hit the restart button inside Windows and you should be able to see the image below then try to tap on the screen to test and observe. I
If the touch capability is still not functioning, I recommend you contact lenovo for service.
- Link to picture
- Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Touchscreen stops working after waking up from sleep

Touchscreen stops working after waking up from sleep sometime it not working at all.
IT encore2 WT8-B32CNM

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

The audio in "speak screen" stops working after a few uses. IOS 8.2 did not fix this problem unfortunately. I'm using the Alex voice on a Sprint iPhone 6 plus- if that matters.

I really enjoy the speak screen feature, as the voiceover is too inconvenient and tricky to use. The speak screen option works oerfectly for reading, and helps me as I'm dyslexic. However, the Alex voice stops working after the initial use or soon after. I then have to restart the phone every time in order to get the speak screen to acruelly speak again. Really annoying and was hoping that IOS 8.2 Would fix this, but it appears it had not fixed this bug. Any help with this?

Any problem when connected to another wi-fi network besides your own?
The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

Touchscreen stops working after a few seconds on new iPad 2

The touch screen would stop working completely a few seconds after turning on. The iPad is still running fine -- Home/Power/Volume buttons work perfectly. But not the touch screen. I can not control the iPad except turning it on/off or turning the volume up/down.
Tried resetting the unit by holding Home and Power buttons. Still the same issue after rebooting.
Tried restoring the iPad completely from iTunes. With a clean iOS the touch screen still doesn't work.
Leaving the unit untouched for a few hours, then the touch screen would start working again.... for another few seconds. Then it stops working.
This is a replacement iPad which Apple Store gave me, but I'm out of the country now and there is no Apple Store where I am. How can I get this fixed?

1. i connect the device to usb power
The Stor.e Wireless Adapter should be connected to mains power and the other end to the external HDD.
Then you could use the app to access the content wirelessly.

Finger print recognition stops working after a few uses with IOS 8

Why does my finger print recognition stop working on my IP6 and IOS 8.1.2 after a few uses. I re-enter finger prints and it stops working again after a few uses.

No one here would know. What troubleshooting steps have you taken so far?
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

HT1665 my iphone headphones remote has stopped working after a few uses. does anyone have any suggestions on how to fix it please??....

Hi all.
My headphones are new form apple as they came with the phone. They have been good for the few times i have used them but out of the blue after about a weeks use they have stopped allowing me to skip forwrd or backwards???????? I am still able to pause and use my mic for Siri so im a little bit confused as to what the problem can be.. Is there anyone out there who knows what the problem might be or how to fix it??
Thanks.

Go to the settings in your Jeep, "forget" the iPhone. And on the iPhone "forget" the jeep. Then put the Jeep in Pairing Mode and tap Settings/BlueTooth on the phone and pair them anew (which sounds less confusing than "repair them").

Touch screen L2105 always stops working after a few minutes

I have windows 8.1 and the touch screen always stops working after a few minutes- ie. the touch operation via USB, the screen itself is OK.Have tried windows switching power saving off, but no help
charsepp

Hello charsepp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the touchscreen stops working after a short period on your HP L2105 Monitor. The first thing you are going to need to do is determine if this is a monitor or PC issue. To do this you should try connecting the monitor to another computer and see if the issue persists.
If the issue does not persist it is the computer, and if your computer is also HP I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running? Is the Windows Version on My Computer 32-bit or 64-bit?
If the issue persists when you try the monitor on another computer then the issue appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Itunes stops working after say half hour of use and will not play next song, the only way to get it working again is to close and reopen, then it works fine till next time, but the problem keeps returning

itunes stops working after say half hour of use and will not play next song, I have to close and reopen, it works fine till next time, it keeps happening on a regular basis, HP pavilion laptop, g6 series,
Window 7 64 bit

Hello davewood26,
The following article provides steps that can help get iTunes stabilized.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well.

Touch ID stops working after a few hours of capturing a fingerprint

After capturing fingerprints Touch ID works for a while, a couple of hours, then stops woking and does not recognize fingerprints. I've taken the iPhone 6 Plus to the Genius Bar twice where they recapture the fingerprints, Touch ID works while in the store, then stops working after I leave. One Genius had me place the iPhone in Airplane mode, delete the fingerprints, turn-off the iPhone and then restart iPhone, turn-off Airplane mode and recapture the fingerprints. Touch ID worked for a couple of hours. Suggestions?

Kappy:
Unfortunately, I wiped down the home button and my thumb, recaptured my fingerprint and I have the same result. The Touch ID stops working shortly thereafter.

Skype 7.7 stops working after a few hours

After a few hours maybe 6 hours or so, skype will not let me get on calls. If I try to get on a call skype immediately stops working. I am using Windows 10 and I tried uninstalling it and reinstalling it but that has not worked.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

[Ubuntu, Windows 8.1] Touchscreen stopped working.

Hello!
From about 1 year I'm lucky owner of Lenovo Idea Pad Flex 15 Laptop. I love it!
Today touchscreen of laptop stopped working after reboot from Ubuntu 14.04 to Windows 8.1. On both system screen is detected but, there is no input. I tried to turn off usb power saving on Win 8.1 and reinstalling all HIDs, without any success. On Ubuntu I tried to calibrate screen - still no luck. If applicable there is dmseg output:
dmesg | grep eGalax
[ 3.443718] usb 2-1: Product: eGalaxTouch EXC7910-1026-13.00.00
[ 3.443720] usb 2-1: Manufacturer: eGalax Inc.
[ 27.549122] input: eGalax Inc. eGalaxTouch EXC7910-1026-13.00.00 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input7
[ 27.549752] hid-multitouch 0003:0EEF:A111.0001: input,hiddev0,hidraw0: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7910-1026-13.00.00] on usb-0000:00:14.0-1/input0
So, how to make screen working again?
Cheers, Damian Herman

Hi，
A VPN 720 Error can occur if your server's VPN configuration doesn't point to a valid DHCP server on its network. The result is your client can't connect since it doesn't have a valid IP address to use.
On the VPN Server, go to "Routing and Remote Access" under "Administrative Tools" and go to the "DHCP Relay Agent" configuration. Check the DHCP server IP addresses that are listed for correctness
Regarding to restore point as mentioned in the post, do you have a anti-virus software installed? if you have, I suggest you temporarily disable it, then try restore point again.
For that specific update KB2920189, any error messages prompted when you uninstall it, you can also check the cbs log (Windows\logs\cbs), for detailed information.
Yolanda Zhu
TechNet Community Support

Keyboad stops working after login

Hey guys! I have windows 8.1 installed on my Lenovo Ideapad Z510. Recently, I have been experiencing problems with the keyboard. I can type in my password and log in, but the keyboard stops working after that. It used to stop working and then fix itself after a few minutes, but it completely stopped working yesterday.
I have searched for solutions online and have tried almost everything from disabling filter keys to uninstalling the keyboard driver, but they did not make any difference.
Please let me know if you can think of a solution. Any comments would be greatly appreciated.

Try the on-screen keyboard and see if that works. I don't think this is your problem, but this morning after updating my Yoga from 8 to 8.1 my keyboard stopped working. But it has a touchscreen and then on-screen keyboard worked fine. I fixed the keyboard by moving the screen on the hinges. I have no idea what that did, but it fixed my problem.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Wifi iPad 3 charger stopped working after updating to iOS 6, help!

Wifi iPad 3 charger stopped working after updating to iOS 6. The little iPhone charger charges it very very slowly, but the charger gets really hot after a while. I restored it and everything works but the charger. It's only a few months old, should I try a new iPad wall charger block?

Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks

Lenovo Flex 10 touchscreen stops working after 1 hour of use.

Similar Messages

Maybe you are looking for