Lenovo g570 network adaptor not found (for wifi and blue tooth)

 my lenovo g570 laptop does not found network adaptor for wifi and blue tooth it did not recognize the hardware part may be. because i install software for that so may time. few days back i used wifi as well as bluetooth in my lapi but for last two or three month i just used lan for internet connection and in between i chanded my os wihich is win 7 ultimate to win 7 proff. i dont know what is the reason for that.
please troubleshoot this so that my lapi can detact network adaptors for wifi and blue thooth.
vivek
Solved!
Go to Solution.

hi VIVKGP,
Thanks for Posting!
Please check under Control Panel and uninstall Lenovo energy Management and uninstall it,
 Now Download and install this, now Download and Install this.
Lenovo Energy Management -WIndows 7
caez29ww.exe
13.6MB
Restart after Installation
After Installation:
Press Fn+F5 and make sure Wifi and bluetooth are on "ON" status.
You can also Try installing Drivers for both.
Broadcom Bluetooth Driver
IN3BTH50WW5.exe
58.8 MB
Intel Wireless WiFi Link Driver
IN1WLN101WW5.exe
138 MB
and check the status again.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • My Air Drop feature is not working. I have an iPhone 5S running iOS 7.0.3, my wifi and blue tooth is on and I am set to "everyone" in control panel. I am not able to see anyone in the AirDrop box to be to share pics or contacts.

    My wifi and Bluetooth is on, in control panel I have "Everyone" on, I cannot see other iOS devices that are using iPhone 5 or 5S. My phone is only a couple of weeks old and was purchased brand new and I am on AT&T. I can not see other devices and other devices can not see me. I checked the manuel and I don't see any other settings other then what I described above in regards to control panel. Anyone have a solution for me? Oh by the way I have rebooted my phone, did a hard reset 3 different times but still not working. I do have an active iClould account.

    I read a previous blog from a Mac user who was having an AirDrop issue. He resolved it by deleting his icloud account and reinstalling it. I figured what will it hurt to try this with my iPhone 5S. Well I am happy to say it worked. I recall recently changing my Apple ID password. This must have affected the Airdrop feature. When I reloaded my IClould account it started working. I don't know why but it's something you can try if all else fails. Hope this helps someone.

  • My speakers arnt working and neither does my wifi and blue tooth will apple replace it for free?

    after i updated my software on my iphone 4 my speakers, bluetooth and wifi arnt working will apple replace it for free?

    If your phone is under warranty, yes.  If not, you will pay $149 for out of warranty replacement.

  • WiFi and blue tooth card

    Hi.
    Could someone please tell me if i could put the wifi/bluetooth card on my mo/bo into an ordinary pci slot or does it have to go into the orange slot.
    Can i move it to another pc?
    In the manual it seems that it has 3 pci slots.....one of the three is orange so im thinking i can, but why make one orange.
    Thanks for your help.

    Quote from: phill86 on 24-September-06, 18:25:25
    Great, thanks for that.
    The reason that i ask is my son needs a new pc (skt A) so i was thinking of giving him mine (sig below) and i buy a new one. keeping my bluetooth and wifi.
    May be a DFI board but im not sure of the model yet. crossfire seems to be getting good reviews at the moment.
    do you know how the DFI compaires to msi. ?
    thanks for your post.
    Crossfire ==> has a better review especially the 1600XT and 1800XT. If you wan to oced then DFI is the choice as it has better volt options. GD luck.

  • Problem  : applet not found for installation

    After downloading cap file i try to create applet instance and select it.My script file that i send to apdutool look like this
    powerup;
    //then select the installer applet using this command
    0x00 0xa4 0x04 0x00 0x09 0xa0 0x00 0x00 0x00 0x62 0x03 0x01 0x08 0x01 0x7f;
    //then create wallet instance as
    0x80 0xb8 0x00 0x00 0x0b 0x09 [here wallet applet AID]
    //then select the wallet applet
    0x00 0xa4 0x04 0x00 lc [here wallet applet aid that i specify while converting to cap file]
    powerdown;
    when i send this script file to jcre then for select installer applet sw1 sw2 is 9000 but for second apdu command means creation applet returns apdu response that is 6443 means applet not found for installation and similarly third apdu command responses is not proper
    i don't know where is problem bcoz the script file that i create from scriptgen tool by giving cap file as input runs properly by jcre but when after appending my own apdu commands e.g. create applet,debit or credit then apdu responses r not valid.................plz help me that why all this happened
    thanks

    To use the JCRE you are running the reference implementation. That tool needs you to download the CAP file and the CAP components. That's provided in the results from the scriptgen tool.

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • SCCM Install fails. cannot connect to SQL server. "the network was not found"

    Hi,
    I'm installing SCCM 2012. i have a 2 server boxes. 1x sccm and 1x dedicated SQL. sccm installation is stuck @ connecting to DB.
    SQL server is 2012 with SP2, static 1433 port used.installation account used is already sysadmin, sccm computer account also added into SQL local admins. ports 1433, 4022, 445 are already FW open in between SCCM box and SQL Box?
    error pop up" "the network was not found"
    Pls advise.

    if MS is really doing good job then such things (scCm on remote sql) should be easy for us with proper docs. Cheers!
    The docs are "proper". They give you all the technical details needed. They assume however that you know how to translate the stated requirements, like the ports necessary (as documented at
    http://technet.microsoft.com/en-us/library/hh427328.aspx ), into the environment you are working in. They cannot give you a click by click guide because that would only be applicable to
    generic lab environments.
    Sorry that that may sound a bit harsh, but it is reality. They simply have no idea what customer networking environments actually look like as the possibilities are simply unbounded. They must rely on the implementer being able to take the core technical
    requirements and implement them for the uniqueness of the environment they are working in. In most cases, this is generally straight-forward, but there is a great deal of variety in the real-world.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • A desktop is failing to join in Domain over a VSAT link. Error: Network path not found.

    Dear Friends,
          Facing an issue for adding a desktop in Domain over VSAT. When I say enter after typing the domain name which i want to join. I am asked for User name and Password. After User name and password is entered it waits for a long
    time and then it gives an error as Network Path not Found. I am pretty surprised why is it happening like that.
    In hosts file too I am mentioning the IP of the DC at my Data Center.
    I have another site over VSAT which has worst latency and more RTO's than this one, but on that site I am able to add a desktop in Domain. I don't have domain controller at the remote site which is connected by VSAT.

    Please do not hardcode the domain IP address in your HOSTS file. That will just create issues.
    Please make sure that your client computer points only to internal DNS servers for DNS resolutions.
    You can use NSlookup to make sure that DNS resolution for your DCs A and SRV records are working properly:
    http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
    https://support.microsoft.com/en-us/kb/241515?wa=wsignin1.0
    Also, make sure that you have no connectivity failures between your remote site and the one having your DCs using
    ping: http://social.technet.microsoft.com/wiki/contents/articles/30110.ping-for-beginners.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Forms: network resources not found

    I created forms using Adobe 9 standard, and distributed them to over 100 people.  Everything was  working great until Nov24, not it says "network resourses not found"  i called adobe directly, and was told on Monday that there is  an issue with Acrobat.com due to upgrades, should be fixed by Wedn.  the issues is still a problem.  I have called several 800 numbers for adobe trying to get to the correct department and have been hung up on 8 times!  i am getting completely frustrated!  Is there an issue with Acrobat.com?  is it fixed?  what number can i call to get someone who can actually help me??

    Hello,
    I'm so sorry for the inconvenience. The solution to the problem has been posted in a forum thead here:
    http://forums.adobe.com/message/2433124#2433124
    Michelle

  • Item cost not found for one or more items - Inventory Posting

    Good Day Mentors,
    My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
    The specific Message ID from SAP's System Message Log is 10001287.
    I found a similar post which addresses this error here.
    But unfortunately it did not help me solve my user's problem.
    I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
    I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
    I am not a business consultant neither am I literate in accounting, so thanks for the patience.
    SAP Version: 9.0 PL5
    Valuation Method: Moving Average
    Thanks in advance!
    Sean

    Hi Augusto and Raviraj,
    I've already verified in our production database the points you made:
    - Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
    YES
    - Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
    YES
    * I apologize for not have been able to give this information upfront.
    Anyway, the database only has one warehouse at the moment.
    I've checked the items, like the item in the screen shot above, and it does have an item cost.
    Below is the screenshot of the sample item from my original post,
    Thanks in advance!
    Sean

  • After upgrade to 11.1.1.2 Agreement not found for trading partners

    We just upgraded from 11.1.1.1 to 11.1.1.2 and an existing composite that sends a file from Oracle EBS to an outside trading partner is not working.
    We tried importing the Agreement from the 11.1.1.2 and when it did not work, we purged the repository and started from scratch.
    The error we are getting is:
    Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND
    This is a file that we are sending from Oracle EBS to an outside trading partner via FTP.
    One thing we are noticing is that when we create the agreement, it does not show up under our host TP, it only shows up under the target TP.
    We have set up the TP, Channel, and agreements exactly like they are set in the 11.1.1.1 environment.
    Here is the log file in debug mode.
    [2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException notifying App
    [2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enter
    [2010-06-17T07:40:10.479-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: payload = <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">[[
    <correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
    <b2bMessageId>10011</b2bMessageId>
    <errorCode>B2B-50547</errorCode>
    <errorText>
    <![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
      ]]>
    </errorText>
    <errorDescription>
    <![CDATA[Machine Info: (afsmlnx04.rheem.com)
    Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
      ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    [2010-06-17T07:40:10.486-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
    <b2bMessageId>10011</b2bMessageId>
    <errorCode>B2B-50547</errorCode>
    <errorText>
    <![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
      ]]>
    </errorText>
    <errorDescription>
    <![CDATA[Machine Info: (afsmlnx04.rheem.com)
    Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
      ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    [2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUE
    [2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] URL ===== aq://IP_IN_QUEUE@jdbc/SOADataSource
    [2010-06-17T07:40:10.514-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send TO Endpoint: 509 aq://IP_IN_QUEUE@jdbc/SOADataSource
    [2010-06-17T07:40:10.522-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] TransportProperties.TransportProperties():internal=true;aq.sender.queue_name=IP_IN_QUEUE;aq.sender.datasource=jdbc/SOADataSource;aq.sender.queue_payload_col=PAYLOAD;aq.sender.recipients=b2berroruser;
    [2010-06-17T07:40:11.356-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send Message Successfully Transmitted
    [2010-06-17T07:40:11.377-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.msgproc.MessageHandler:findInvocationContext trying doc ref
    [2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Exit
    [2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: B2B-50547: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
    [2010-06-17T07:40:11.397-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] class oracle.tip.b2b.metric.B2BMessageProperties[[
    fromTP : Rheem
    toTP : JPMorgan
    DocumentProtocol : null
    DocumentProtocolVersion : null
    DocumentType : JPPositivePay
    Agreement : null
    MessageSize : 0.0
    MessageState : ERROR
    FromEndpoint : null
    FromEndpointProtocol : null
    FromEndpointStatus : null
    ToEndpoint : null
    ToEndpointProtocol : null
    ToEndpointStatus : null
    Application : null
    Application : null
    Composite : null
    CompositeVersion : null
    Service/Reference : null
    ]]

    In another thread Nitesh states:
    b2b.documentProtocolVersion is missing in your properties and b2b.toTradingPartnerId is not set properly.
    Below are the property, you should set in composite:
    b2b.documentTypeName = <doctype>
    b2b.documentProtocolVersion = <docRevision>
    b2b.fromTradingPartnerId = <HostTPName>
    b2b.toTradingPartnerId = <RemoteTPName>
    b2b.messageType = <msgType>
    If you want to identify TP based on Identifier then use below for TP:
    b2b.toTradingPartnerId = <AS2 Identifier Value>
    b2b.toTradingPartnerIdType = <AS2 Identifier>
    We are setting the b2b.documentProtocolVersion variable in BPEL:
    [2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Key : b2b.documentProtocolVersion
    [2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Value : 1
    Edited by: robn77 on Jun 17, 2010 5:27 AM

  • UIXJSP App built off BC4J Project JBO Excep XML File not found for the Container

    Running JDEV 9.0.3 build 960
    Created a new project in folder "UIX JSP"
    "UIX JSP" note the space!
    Create a default UIX JSP Application based on existing BC4J Project
    When running a JSP - Get a JBO Error complaining that the XML File not found for the Container
    If I recreate the project with name UIX_JSP problem does not occur.

    I logged a bug on this.

  • XML File not found for the Container model.cpx

    I can run my application from JDeveloper without receiving the error. But when I deploy the application I get the following:
    500 Internal Server Error
    oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container model.cpx     at oracle.jbo.mom.DefinitionManager.loadProjectDefinition(DefinitionManager.java:751)     at oracle.jbo.uicli.mom.JUMetaObjectManager.createPool(JUMetaObjectManager.java:457)     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:541)     at oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(BC4JRequestProcessor.java:233)     at oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(BC4JRequestProcessor.java:123)     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:234)     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:721)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)     at java.lang.Thread.run(Thread.java:479)
    Any Ideas?

    Hi,
    please explicitly "make" the project. One reason for this problem could be that the model.cpx isn't created properly. Select the model project and compile the complete project before deploying it. Sometimes it helps to clear the "class" directory of the project on teh file system before re-compiling
    Frank

  • "XML File not found for the Container DataBindings.cpx" error after deploy

    Hello,
    I have a problem with my JSP-Javaproject. Local works all fine but when i deploy my project to a Oracle Aplication Server i allway get this XML-File-Not-found exception:
    oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container DataBindings.cpx
    In my EAR-File the DataBindings.cpx is at:
    \WEB-INF\classes\
    My JSP-File:
    <jbo:ApplicationModule id="AippackageModule" definition="DataBindings.DataModule" releasemode="Stateful" />
    My web.xml:
    <context-param>
    <param-name>CpxFileName</param-name>
    <param-value>DataBindings</param-value>
    </context-param>
    My DataBindings.cpx:
    <?xml version='1.0' encoding='windows-1252' ?>
    <Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
    Package="" ClientType="Generic">
    <pageMap>
    </pageMap>
    <pageDefinitionUsages>
    <page id="eonerrorPageDef"
    path="de.avacon.ahb.system.tools.pageDefs.eonerrorPageDef"/>
    </pageDefinitionUsages>
    <dataControlUsages>
    <BC4JDataControl Configuration="AppModuleLocal"
    Package="model.data"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="DataModule">
    <Parameters/>
    </BC4JDataControl>
    </dataControlUsages>
    </Application>
    What can i do?
    Thanks, steve

    Adding the dependency in the ViewController fixed this for me.
    I'm using two AppModules in the controller and the second one wasn't being picked up.
    I was able to fix this by:
    Go to the Project Properties, select Dependencies, edit the Dependent Projects and Archives, find the model that's failing and add a tick in the Build Output box.
    The model should now be picked up in the ViewController's DataBindings.cpx source file, though I did have to restart JDev for this to be picked up.
    HTH
    Phil

  • XML File not Found for the Container BC4J.cpx

    Hi,
    Have following error when I start a BC4J-JSP/Struts application (with Embedded and standalone OC4J) :
    500 Internal Server Error
    oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container BC4J.cpx
         oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition(java.lang.String)
              DefinitionManager.java:751
         oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition()
              DefinitionManager.java:793
         void oracle.jbo.mom.DefinitionManager.initManager()
              DefinitionManager.java:137
         void oracle.jbo.uicli.mom.JUMetaObjectManager.<init>()
              JUMetaObjectManager.java:57
         oracle.jbo.uicli.mom.JUMetaObjectManager oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMom()
              JUMetaObjectManager.java:131
         oracle.jbo.common.ampool.SessionCookie oracle.jbo.http.HttpContainer.findSessionCookie(javax.servlet.http.HttpSession, java.lang.String, java.lang.String, java.util.Properties)
              HttpContainer.java:541
         boolean oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(oracle.jbo.html.struts11.BC4JActionMapping, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              BC4JRequestProcessor.java:222
         org.apache.struts.action.ActionMapping oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
              BC4JRequestProcessor.java:124
         void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              RequestProcessor.java:234
         void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              ActionServlet.java:1292
         void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              ActionServlet.java:492
         void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              HttpServlet.java:740
         void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
              HttpServlet.java:853
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
              ServletRequestDispatcher.java:721
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
              ServletRequestDispatcher.java:306
         boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
              HttpRequestHandler.java:767
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
              HttpRequestHandler.java:259
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
              HttpRequestHandler.java:106
         void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
              PooledExecutor.java:803
         void java.lang.Thread.run()
              Thread.java:484
    Then I make a Reload and it's ok.
    I have a Workspace with two Projects :
    BC4J.jpr for Businnes Components
    Web.jpr for JSP Struts
    In /classes I have the file Web.cpx, but no BC4J.cpx.
    From which does this name come ? Can I change this name ?
    Thanks
    Yves

    I found this on Metalink...
    JBO-26001: NoXMLFileException
    Cause: Could not open the named XML file for read.
    The following is from Note 137429.1. Hope this helps.
    Raja.
    JBO-26001: NoXMLFileException
    Cause: Could not open the named XML file for read.
    Action: 1. Make sure that the file is present. In particular, if the file is to be found in a zip/jar file, make sure that the Zip/JAR file is included in the CLASSPATH.
    2. This error is also reported if the name of the XML file does not match the object Name specified in the XML file. If the file system support case insensitive file names (e.g., Windows NT), make sure that the file name matches the object Name in the XML file in case-sensitive fashion.
    3. For a .JPX file, this error is reported if the JPX file is missing the JboProject XML tag. Check the JPX file to make sure that the valid tag is in there.
    4. One XML file may be extending another XML file (specified by the Extends element in this XML file). This error is reported if the base XML file is not found.
    5. When loading the XML file for a package (JboPackage tag), this error is reported if some unexpected error occurs while loading a containee.
    In all of the above cases, a more descriptive message may be printed on Diagnostic. If you are not seeing Diagnostic messages, you can run your application with Diagnostic turned on, as in "java -Djbo.debugoutput=console ...", to see Diagnostic messages.

Maybe you are looking for

  • Error while installing Oracle 10g rel2 on FC4 - areasQueries missing

    Hi, I keep getting the following error while trying to install Oracle on my FC4: "There was an error while loading library. areasQueries". I found a thread that said I should delete oraInst.loc file or rename it, since the installation recognises fil

  • Problem with syncing contacts

    My Ipod has stopped syncing contacts. It was working previously, but is no longer working. I see Itunes very briefly accessing contacts, but nothing is transfered. Contacts once on the Ipod are gone now. Any ideas on how to diagnose this problem? I d

  • 2009 macbook running very slow with Yosemite?

    After installing Yosemite there was a big change in performance for all actions on my computer. Start up, basic actions around the desktop and all applications are going considerably slower - slower than they ever have with my computer. I've changed

  • Missing values of Enterprise Custom Field in Project Professional and Project Web Access

    Hi all, In Project Server 2010 SP2 we created a custom field called Iteration Path (without a lookup table). We're in an environment where Project Server task data gets synched from TFS and we've mapped the Iteration Path from TFS to the Enterprise C

  • Adding systems with same SID in SMSY - solution manager

    Dear All, We are having systems with same SID's which  belongs to different landscape created for various customers. Currently We are having only one solution manager. I consider this example for explanation. Customer 1 : DEV --> QAS --> PRD ( SID's)