Lenovo s820 Dec 2014 update

220mb update...I have no idea what all were the updates..But i do know, the 'low light' option in camera has been removed   The screen shot feature doesnt always work 
A little more RAM has been freed up i guess..
just updated 2 days back. will find out more later...

The update applied to the device is the update that the device qualifies for. In your case, all of the devices you listed qualify for the now current (Dec 17, 2014) iOS 8.1.2. If you update any of the devices you listed, they will be updated to iOS 8.1.2. You cannot install an intermediate iOS version (for example, iOS 7.1.2). Even if you had the .ipsw file (iPod Software Update) for your particular device with the version you wanted to update to, the update would fail as Apple checks the device along with what iOS version it's qualified for at the time of the update. If the iOS version you are trying to update the device to is older than what is current for your device, the update will not proceed.
You can always choose to stay at your current iOS version on your devices and they will run/work just as before. However, if you want to run more recent apps that require iOS 7.x - iOS 8.x, you will need to update the device to iOS 8.x

Similar Messages

  • Dec 2014: update iPad 2, iPhone 4S to 7.1.2 but not to 8.1.2

    Hello,
    I'm new to this community and a few years as an Apple user.
    It's now dec 17th 2014.
    Is it still possible to update several iDevices to iOS 7.1.2, but not to 8.1.2? and if so, how do I go about this?
    The devices are:
    - iPad 2 running iOS 6.1.2
    - iPhone 4S running iOS 6.1.2
    - iPhone 4S running iOS 7.0.6
    - iPod Touch 5th generation running iOS 7.1
    Each of the above devices have never been updated to a higher version, so I don't have any back-ups of 7.1.2 in my iTunes.
    I'm not interested to upgrade them to iOS 8.1.2 because I get too much conflicting reports on other websites (Macrumours, 9to5Mac,...) about it slowing down considerably the A5-processor devices (see my devices, they are all A5's).
    Thank you in advance.
    With kind regards,
    Zendo

    The update applied to the device is the update that the device qualifies for. In your case, all of the devices you listed qualify for the now current (Dec 17, 2014) iOS 8.1.2. If you update any of the devices you listed, they will be updated to iOS 8.1.2. You cannot install an intermediate iOS version (for example, iOS 7.1.2). Even if you had the .ipsw file (iPod Software Update) for your particular device with the version you wanted to update to, the update would fail as Apple checks the device along with what iOS version it's qualified for at the time of the update. If the iOS version you are trying to update the device to is older than what is current for your device, the update will not proceed.
    You can always choose to stay at your current iOS version on your devices and they will run/work just as before. However, if you want to run more recent apps that require iOS 7.x - iOS 8.x, you will need to update the device to iOS 8.x

  • Lenovo S820 problem in call with bluetooth headset

    Hello All.
    I have Lenovo S820. I update smartphone to last version firmware. Information from phone:
    Model: Lenovo S820_ROW
    Android system version: 4.2.1
    Firmware communication module: S820.V21, 2013/08/07 15:14
    Build number: S820_ROW_S119_130922
    I also connected the bluetooth headset. In the phone attached 2 sim: MTS(3g and 2g), BWK(only 2g)
    Problem:
    When I call from first slot of sim with bluetooth before whistles Lenovo S820 activate flight mode and disconnect with all providers(MTS and BWK) and after reset call Lenovo S820 turn off flight mode.
    In second phone I recive call, but I can't answer a call from Lenovo S820.
    I try from different headsets. this problem occur with all headsets.

    try to update your firmware with the latest ROW version
    [#Update]#Lenovo #S820 with the Latest ROW Version Firmware S221
    http://bit.ly/1wPlj9V
    Lenovo Guide and Blog http://bit.ly/1hZlF2p

  • Lenovo S820 Firmware update error

    Hi
    Today i tried to update my Lenovo s820 firmware : S820_ROW_8G_S221_140730_TO_S820_ROW_8G_S222_141121 (222MB)
    After complete download i faced error while updating.
    Can anyone faced same issue and whether it got rectified?
    Thank you

    I suggest to use Lenovo Smart Assistant (desktop client) to help updating your phone version if you couldn't do it from the phone.
    http://support.lenovo.com/us/en/products/phones/vibe-series/vibe-z2-pro/downloads/DS101291
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Web Application suddenly crash (Citrix is not Responding, Citrix stoped Working) - Windows Update Dec 2014

    After the distribution of the latest windows update on Dec 2014 we started to face irregular behavior with our Citrix ICA Client V12 which is used to connect to our online applications. The web application suddenly crash and windows provides an error message
    as below. The event viewer shows the below log.
    We suspect that it was duo to Windows update, we have tried this fix (https://support.microsoft.com/kb/3025390) but with no luck.
    Any help is appreciated.
    Faulting application name: WFICA32.EXE, version: 9.200.44376.0, time stamp: 0x4457db21
    Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea91c
    Exception code: 0xc0000005
    Fault offset: 0x00056b0d
    Faulting process id: 0x10d4
    Faulting application start time: 0x01d019e9afafc4b1
    Faulting application path: C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: f6c843ce-85dc-11e4-b1c7-d4bed9e4153f

    We have tried to also to run (System File Checker) SFC /Scannow to check if there are any issue with the system files as outlined in the event log. But there was no problem returned with the checker.
    I have extracted the below Windows Error Reporting WER file when the ICA client crash. Can we analyze the data as we might find the cause,
    Version=1
    EventType=APPCRASH
    EventTime=130636298224429936
    ReportType=2
    Consent=1
    UploadTime=130636298279335952
    ReportIdentifier=a415d253-88f8-11e4-84ec-f04da2276df6
    IntegratorReportIdentifier=a415d252-88f8-11e4-84ec-f04da2276df6
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=WFICA32.EXE
    Sig[1].Name=Application Version
    Sig[1].Value=9.200.44376.0
    Sig[2].Name=Application Timestamp
    Sig[2].Value=4457db21
    Sig[3].Name=Fault Module Name
    Sig[3].Value=ntdll.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=6.1.7601.18247
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=521ea91c
    Sig[6].Name=Exception Code
    Sig[6].Value=c0000005
    Sig[7].Name=Exception Offset
    Sig[7].Value=00052d37
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.48
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=0a9e
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=0a9e
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
    UI[2]=C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE
    UI[3]=Citrix ICA Client Engine (Win32) has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\system32\kernel32.dll
    LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\system32\USER32.dll
    LoadedModule[5]=C:\Windows\system32\GDI32.dll
    LoadedModule[6]=C:\Windows\system32\LPK.dll
    LoadedModule[7]=C:\Windows\system32\USP10.dll
    LoadedModule[8]=C:\Windows\system32\msvcrt.dll
    LoadedModule[9]=C:\Windows\system32\SHELL32.dll
    LoadedModule[10]=C:\Windows\system32\SHLWAPI.dll
    LoadedModule[11]=C:\Windows\system32\ADVAPI32.dll
    LoadedModule[12]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[13]=C:\Windows\system32\RPCRT4.dll
    LoadedModule[14]=C:\Windows\system32\ole32.dll
    LoadedModule[15]=C:\Windows\system32\VERSION.dll
    LoadedModule[16]=C:\PROGRA~1\Citrix\ICACLI~1\ICALOGON.dll
    LoadedModule[17]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\COMCTL32.dll
    LoadedModule[18]=C:\PROGRA~1\Citrix\ICACLI~1\PScript.dll
    LoadedModule[19]=C:\Windows\system32\OLEAUT32.dll
    LoadedModule[20]=C:\PROGRA~1\Citrix\ICACLI~1\SSLSDK_B.dll
    LoadedModule[21]=C:\PROGRA~1\Citrix\ICACLI~1\ACRDLG.dll
    LoadedModule[22]=C:\PROGRA~1\Citrix\ICACLI~1\STATUIN.dll
    LoadedModule[23]=C:\PROGRA~1\Citrix\ICACLI~1\TcpPServ.dll
    LoadedModule[24]=C:\PROGRA~1\Citrix\ICACLI~1\CgpCore.dll
    LoadedModule[25]=C:\PROGRA~1\Citrix\ICACLI~1\CGPCFG.dll
    LoadedModule[26]=C:\Windows\system32\NETAPI32.dll
    LoadedModule[27]=C:\Windows\system32\netutils.dll
    LoadedModule[28]=C:\Windows\system32\srvcli.dll
    LoadedModule[29]=C:\Windows\system32\wkscli.dll
    LoadedModule[30]=C:\Windows\system32\WINMM.dll
    LoadedModule[31]=C:\Windows\system32\apphelp.dll
    LoadedModule[32]=C:\Windows\AppPatch\AcXtrnal.DLL
    LoadedModule[33]=C:\Windows\system32\IMM32.DLL
    LoadedModule[34]=C:\Windows\system32\MSCTF.dll
    LoadedModule[35]=C:\PROGRA~1\Citrix\ICACLI~1\resource\en\STATUIUI.DLL
    LoadedModule[36]=C:\Windows\system32\uxtheme.dll
    LoadedModule[37]=C:\Windows\system32\CRYPTBASE.dll
    LoadedModule[38]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
    LoadedModule[39]=C:\Windows\system32\CLBCatQ.DLL
    LoadedModule[40]=C:\Windows\system32\propsys.dll
    LoadedModule[41]=C:\Windows\system32\ntmarta.dll
    LoadedModule[42]=C:\Windows\system32\WLDAP32.dll
    LoadedModule[43]=C:\Windows\system32\SETUPAPI.dll
    LoadedModule[44]=C:\Windows\system32\CFGMGR32.dll
    LoadedModule[45]=C:\Windows\system32\DEVOBJ.dll
    LoadedModule[46]=C:\Windows\system32\WINSTA.dll
    LoadedModule[47]=C:\Windows\system32\WTSAPI32.dll
    LoadedModule[48]=C:\Windows\system32\wininet.dll
    LoadedModule[49]=C:\Windows\system32\api-ms-win-downlevel-user32-l1-1-0.dll
    LoadedModule[50]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l1-1-0.dll
    LoadedModule[51]=C:\Windows\system32\api-ms-win-downlevel-version-l1-1-0.dll
    LoadedModule[52]=C:\Windows\system32\api-ms-win-downlevel-normaliz-l1-1-0.dll
    LoadedModule[53]=C:\Windows\system32\normaliz.DLL
    LoadedModule[54]=C:\Windows\system32\iertutil.dll
    LoadedModule[55]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l1-1-0.dll
    LoadedModule[56]=C:\Windows\system32\USERENV.dll
    LoadedModule[57]=C:\Windows\system32\profapi.dll
    LoadedModule[58]=C:\PROGRA~1\Citrix\ICACLI~1\resource\en\WFICA3UI.DLL
    LoadedModule[59]=C:\Windows\system32\dwmapi.dll
    LoadedModule[60]=C:\PROGRA~1\Citrix\ICACLI~1\PDCOMPN.DLL
    LoadedModule[61]=C:\Windows\system32\netbios.dll
    LoadedModule[62]=C:\PROGRA~1\Citrix\ICACLI~1\VDTW30N.DLL
    LoadedModule[63]=C:\PROGRA~1\Citrix\ICACLI~1\VDCDM30N.DLL
    LoadedModule[64]=C:\Windows\system32\MPR.dll
    LoadedModule[65]=C:\PROGRA~1\Citrix\ICACLI~1\VDSPL30N.DLL
    LoadedModule[66]=C:\Windows\system32\WINSPOOL.DRV
    LoadedModule[67]=C:\PROGRA~1\Citrix\ICACLI~1\reducv3.dll
    LoadedModule[68]=C:\PROGRA~1\Citrix\ICACLI~1\pcl4rast.dll
    LoadedModule[69]=C:\PROGRA~1\Citrix\ICACLI~1\emfrendr.dll
    LoadedModule[70]=C:\PROGRA~1\Citrix\ICACLI~1\VDCPM30N.DLL
    LoadedModule[71]=C:\PROGRA~1\Citrix\ICACLI~1\VDCOM30N.DLL
    LoadedModule[72]=C:\PROGRA~1\Citrix\ICACLI~1\VDCAMN.DLL
    LoadedModule[73]=C:\PROGRA~1\Citrix\ICACLI~1\AUDCVTN.DLL
    LoadedModule[74]=C:\PROGRA~1\Citrix\ICACLI~1\ADPCM.DLL
    LoadedModule[75]=C:\PROGRA~1\Citrix\ICACLI~1\VDCMN.DLL
    LoadedModule[76]=C:\PROGRA~1\Citrix\ICACLI~1\resource\en\VDCMNUI.DLL
    LoadedModule[77]=C:\PROGRA~1\Citrix\ICACLI~1\VDTWIN.DLL
    LoadedModule[78]=C:\PROGRA~1\Citrix\ICACLI~1\VDFON30N.DLL
    LoadedModule[79]=C:\PROGRA~1\Citrix\ICACLI~1\VDMMN.DLL
    LoadedModule[80]=C:\PROGRA~1\Citrix\ICACLI~1\VDCTLN.DLL
    LoadedModule[81]=C:\PROGRA~1\Citrix\ICACLI~1\VDSPMIKE.DLL
    LoadedModule[82]=C:\PROGRA~1\Citrix\ICACLI~1\VDTWN.DLL
    LoadedModule[83]=C:\Windows\system32\WS2_32.DLL
    LoadedModule[84]=C:\Windows\system32\NSI.dll
    LoadedModule[85]=C:\Windows\system32\mswsock.dll
    LoadedModule[86]=C:\Windows\System32\wshtcpip.dll
    LoadedModule[87]=C:\Windows\system32\Secur32.dll
    LoadedModule[88]=C:\Windows\system32\SSPICLI.DLL
    LoadedModule[89]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l2-1-0.dll
    LoadedModule[90]=C:\Windows\system32\api-ms-win-downlevel-ole32-l1-1-0.dll
    LoadedModule[91]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l2-1-0.dll
    LoadedModule[92]=C:\Windows\System32\wship6.dll
    LoadedModule[93]=C:\Windows\system32\IPHLPAPI.DLL
    LoadedModule[94]=C:\Windows\system32\WINNSI.DLL
    LoadedModule[95]=C:\Windows\system32\MMDevAPI.DLL
    LoadedModule[96]=C:\Windows\system32\wdmaud.drv
    LoadedModule[97]=C:\Windows\system32\ksuser.dll
    LoadedModule[98]=C:\Windows\system32\AVRT.dll
    LoadedModule[99]=C:\Windows\system32\spool\DRIVERS\W32X86\3\unidrvui.dll
    LoadedModule[100]=C:\Windows\system32\spool\DRIVERS\W32X86\3\mxdwdrv.dll
    LoadedModule[101]=C:\Windows\system32\spool\DRIVERS\W32X86\3\hpmdp083.dll
    LoadedModule[102]=C:\Windows\system32\spool\DRIVERS\W32X86\3\hpcui083.dll
    LoadedModule[103]=C:\Windows\system32\COMPSTUI.dll
    LoadedModule[104]=C:\Windows\system32\MSIMG32.dll
    LoadedModule[105]=C:\Windows\system32\ATL.DLL
    LoadedModule[106]=C:\Windows\system32\spool\DRIVERS\W32X86\3\unidrv.dll
    LoadedModule[107]=C:\Windows\System32\msxml3.dll
    LoadedModule[108]=C:\Windows\system32\spool\DRIVERS\W32X86\3\KMUU51KQ.DLL
    LoadedModule[109]=C:\Windows\system32\COMDLG32.dll
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=Citrix ICA Client Engine (Win32)
    AppPath=C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE

  • Lenovo S820 Update

    Hi, anyone using Lenovo S820 too? 
    What is new with S820_ROW_8G_S222_141121 ??? i just completed updating today. 
    THakns for your answers

    when Lenovo smartphone s820 kitkat

  • Updates for Lenovo S820

    Hello Team, Currently my phone is having Andorid 4.2.1 I would like to know whether Is there any chance to get the update for Lenovo S820 to 4.2.2 and Android Kitkat. ThanksBhushan

    I have the same query of Lenovo S820 phone. After purchase there's only the system update but not OS update. Many are asking in this forum about upgrading their phones to Android 4.3 or kitkat but there no assurance positive feedbacks. Still, others are saying that only the Lenovo high end phones will receive the Os updates.I have found this reference inorder for your phone to be updates to v. 4.2.2 but you need to flash your phone and i think needs some rooting for this to work:http://www.needrom.com/mobile/lenovo-s820-vibe/At first, i got worried about my phone not getting the latest Android OS update:http://www.howtogeek.com/129273/why-your-android-phone-isnt-getting-operating-system-updates-and-what-you-can-do-about-it/So others decided to flash other OS through their phones like Cyanogenmod. I haven't found anything that has been ported to Lenovo S820 with any version of CM yet. I have been satisfied with this article:http://www.howtogeek.com/179638/not-getting-android-os-updates-heres-how-google-is-updating-your-device-anyway/I may not have my phone updated to the latest Android update or I can wait for it, at least google is trying to make ways of improving the phone, not the carriers or even the ones who created these phones. 

  • Service Pack 1 & CU DEC 2014 installation procedure

    Hi together!
    A short question on the update process for SharePoint 2013. Altogether I'm quite aware of the update process and all the pitfalls that come with it. So, we're on March 2013 PU and planning to install
    Service Pack 1 AND December 2014 CU in one rush. In addition, at least one (German) language pack is installed.
    Is it correct to install all the binaries on every SharePoint server first (in order SP1, Language Pack (LP) SP1, DEC 2014 CU) and THEN run the Config Wizard sequentially on all servers? Basically,
    this method should be valid and correct, however, I'm not sure if in case of SP1 a Config Wizard run is neccessary directly after installing SP1 with LP and if that is finished proceed with CU installation.
    Thanks for your support! 

    I have done exactly what you describe without an issue.  Having said that I normally do the upgrade to SP1 with LP and then run the Config Wizard.  Then go back and do the CU install and run the wizard again.  As I said, I've done it in
    one session, but would recommend doing the SP1 first.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Lenovo s820 Signal lost and often shows Roaming even in Home network

    Hi,
    From past 1month I am facing issue with the signal strength and calls automatically get disconnected while talking and it often shows roaming even though I am at the Home network. Pls help.
    Earlier I thought the issue is with the network provider but later I found that the SIM works good in other Phones issue is with my Lenovo S820.
    My Version information:
    Model Number : Lenovo S820
    Android Version: 4.4.2
    Baseband Version: S820.ROW.V104, 2014/11/21 10:59
    Build Number: S820_ROW_8G_S222_141121

    can any one reply

  • I brick my Lenovo S820 :(

    Hi, I bought a new Lenovo S820 and I wanted to upgrade FW cause my phone was without GSM signal (bad modem firmware probably).. So I installed MobileUncle tools, flashed a new recovery, rebooted phone and from that time I have a boot loop. Just Lenovo logo for few seconds, reboot, again logo.. infinite loop. I tried connect my phone for flashing in SP tool, so I push volume up, without battery and on USB, device is found in my laptop, but after few seconds it disappear from system, so I cant install drivers, flash device, anything.. I do not know, what I can do more.. Factory mode is full in chinese and nothing what I do there helps. Recovery doesnt work. Please, any advice? 
    Solved!
    Go to Solution.

    Hi, ok, so for someone in future with similiar problem
    1. power off your phone (put off battery and put it back)
    2. press power+volume down = you will see META MODE status
    3. connect USB, install USB driver -  MediaTek DA USB VCOM Port
          . in case of Windows 8.1 as my case you have to > win+c > settings > change PC settings > update & recovery
            > reboot to recovery settings and there allow (choice no. 7) unsigned drivers
    4. disconnect phone from USB, turn it off (batery out-in)
    6. download official ROM data
    5. run SP Tools, check DA DL check sum, select from unziped ROM datas scatter file, select in the window bellow all values and where is not path, click on the name of value and find file in ROM files
    6. click on download, wait until status in status bar (on the bottom) will  "Searching" and then connect device (which is still powered off) 
    7. wait for green pop up windows - success
    8. unplug phone, now you can turn it on.. done
    In additional you can via SP tool install recovery and then via recovery (power button+vlmup+vlmdown) install zip file with custom rom. 
    Good luck.

  • SharePoint Foundation 2013 - March 2014 Update Issue - Need help

    We've just applied the SharePoint Foundation 2013 March 2014 Update, it always requires that we run the SharePoint Products Configuration Wizard at the end of install, but this time it's getting stuck at step 9 of 10 (the profile sync service cannot be
    started even as admin). Is anyone else having any issues with this update? Has anyone else applied it yet? Is anyone else planning to apply it?
    If anyone can help with advice on this I'd appreciate it.

    Hi,
    We can still access CA but sync will not start. Tried rebooting after the failed configuration and tried to run it again but it didn't work.
    4/2014 10:45:16  5  ERR            Exception: System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
    that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException:
    No connection could be made because the target machine actively refused it 127.0.0.1:32843
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
       at System.Net.HttpWebRequest.GetRequestStream()
       at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
       at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
       at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
       at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
       at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
       at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
       at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
       at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
       at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
       at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
    userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
       at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
       at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
       at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
       at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
       at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
       at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    4/2014 10:45:16  5  ERR            An exception of type System.ServiceModel.EndpointNotFoundException was thrown.  Additional exception information: There was no endpoint listening at
    http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
    System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at //localhost:32843/SecurityTokenServiceApplication/securitytoken. that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException,
    if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:32843
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
       at System.Net.HttpWebRequest.GetRequestStream()
       at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
       at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
       at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
       at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
       at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
       at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
       at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
       at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
       at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
       at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
    userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
       at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
       at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
       at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
       at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
       at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
       at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
       at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    4/2014 10:45:16  1  ERR          One or more configuration tasks has failed or some tasks were not run
    4/2014 10:45:16  1  INF          Leaving function TaskDriver.OnTaskDriverStopping
    04/14/2014 10:45:16  1  INF        Leaving function TaskDriver.ExecuteTasks
    04/14/2014 10:45:16  1  ERR        One or more configuration tasks has failed to execute
    4/2014 10:45:16  1  ERR          Configuration of SharePoint Products failed.  Configuration must be performed in order for this product to operate properly.  To diagnose the problem, review
    the extended error information located at D:\Logs\PSCDiagnostics_4_14_2014_10_44_8_154_1605984328.log, fix the problem, and run this configuration wizard again.
    04/14/2014 10:45:16  1  INF          Entering function StringResourceManager.GetResourceString
    4/2014 10:45:16  1  INF      Leaving function TaskDriver.Run
    04/14/2014 10:45:16  1  ERR      Post setup configuration was not run successfully when using the command line task driver module
    04/14/2014 10:45:16  1  INF    Leaving function PsconfigCommandLineMain.Main
    This is the meaty part of the errors we are getting. Right now our entire site is down. If you know of anything to remedy these errors let me know.

  • I can no longer encode a sequence in PP CC after the Dec 2013 update

    II have had to shut down and restart PP CC about 5 times when just creating a very simple sequence of clips from a family get together for Thanskgiving.  I had to shut down since everything just quite responding.  Fortunately, when I reopened the project, I could resume.   I finally got my sequence created, but, now I can't export the sequence.  The encode has failed 8 times in a row.  I've tried direct export, and exporting to the AME queue.  Sometimes I get the error sound and the absolutely useless error message "Error compiling movie.  Unknown Error." Other times it just stops making any progress in the encode with no message at all, but there are zero CPU cycles being consumed by PP or AME.  It just plain stops, wiht no eror message.  That happened 3 times when used the Media Queue approach, and in the preview window in AME, it just stopped encoding at very different places in the sequence.
    It appears as though I can no longer encode a movie.  And I'm paying big bucks for this every month?  What a sap.
    I'm glad I'm not a Pro, whose income and life depends on these tools!  But, I have a full time job, and only a very small amount of free time.  I do not want to spend my small amount of free time as an Adobe Beta Tester.  I've been using Adobe tools for years, which is why I signed up for CC, but...at this point: I can't even encode a simple sequence!
    I can't express my disappointment.  I wanted to be loading the encoded MP4 onto VIMEO for my friends and family to see by now, but.....I can't even encode a very simple sequence.  And, I not a newbie.  I have hundreds of videos on VIMEO, and many more on Youtube and Smugmug.  Every one was produced with Adobe PP (from v4 on).
    But now:  I'm dead in the water.
    I gurantee you that i will not 're-up' when my CC subscription expires, and, I guess right now, I have to start from scratch with my raw clips and find some other tools to use?  I wish all my expensive plug-ins (like MB Suite) would work in whatever the tools I will move to...but...I guess I'll just have to write them off as a loss, just like the next 8 months of paying for my Adobe CC Software that no longer works.
    I wish there was a way I could take the Thanksgiving Project and its sequences I've created in PP CC and convert the Project to PP 6.0, since I never had  any issues with it PP v6.0.
    But, from what I understand, if you make a project in PP CC, you are lost.  You can't go backwards.
    And, you know what?  I'm done.  I quit.  I won't even try starting over in PP 6.0.  I'm going to find some other tools.  I know they won;t be as full-featured as Adobe's, but...I'm not a pro.  I just need something that works reliably.
    Disgusted beyond words.
    John
    Win 7 Pro
    24 GB Ram
    NVidia GTX 470
    PS:  So, does Adobe have any kind of disaster recovery plan when an update like this fails?  Can you please send out a "new update" that rolls me back to the prior version on PP CC?

    OK.  I have successfully encoded this very simple sequence, but, I *can't* get it to encode using my "standard" custom H.264 preset that I have been using for years.
    But, I was not able to encode in many plain vanilla codecs either, but, I got a notice that there was a CC update for AE, so I took the time to install those updates, and, as I always do, I re-booted after the update of AE.
    But, of course I had re-booted a couple times last night when I couldn't get the sequence to encode.  That's somethinf I always try b4 writing to a form.
    So, here's the sequecne of events this morning:
    1)  Try to encode sequecne to uncompressed AVI (Cineform AVI 1920x1080).  It SUCCEEDED.  But, even though the AVI was large > 3.6 GB the quality was horrible, I did not pay much attention to the quality settings.
    2)  Try to encode to Quicktime H.264 codec.  FAILED.
    3)  Try to encode to Quicktime Codec=Uncompressed 4:2:2.  FAILED
    4)  CC UPdate notice for AE CC and AE 6.0
    5)  Perform update
    6)  Reboot
    7)  Try to encode to Quicktime Codec=Uncompressed 4:2:2.  SUCCEEDED - but ENORMOUS FILE SIZE *very nice quality though*  :-)
    8)  Try to encode to Quicktime Codec=H.264.  SUCCEEDED.
    9)  Try to encode to my 'usual' H.264 Preset FAILED, just hung up during the 2nd of two passes.  My preset is a VBR with 2 passes, see bitmap below. In this particular case it got 'hung' at this frame.  But, It never 'hangs' in the same place?
    So, I don't know why I was able to encode the sequence using the Quicktime Wrapper and botn Uncompressed and H2.264 Codecs after updating AE CC and rebooting, but not before.  Surely there is no interaction between AE and AME?
    But, the re-boot should not have caused it alone, since I had rebooted several times last night, and I've installed nothing but the new update for AE since last night?
    So, I guess I'm OK now.  Please excuse my tone last night, I was very frustrtated.
    It is interesting that I still can't encode this particluar sequence using my "standard" H.264 preset.
    And, BTW Jim:  What I mentioned in my previus post was not that I had brought and old PP 6.0 sequecne into CC and encoded it successfully, but that I just re-encoded one of my most complex sequences AGAIN in PP 6.0, just to wanted to make sure nothing was haywire with "good old" PP 6.0.
    But, I did just re-encode a sequence from PP CC from before the Dec 13 update using my "standard" H.264 preset, and...yes...it DID encode.
    SOOOOO...Jim, you were correct.  My inability to encode was not due to the DEC 13 PP CC update, but something very peculiar about this one sequence.  But, it is a very simple sequence.  The only effects applied is some light color grading using MB Colorista, and Warp Stabilizer to a stabilize a few hand held shots.  No other effects.  And...the encode that fails using my standard preset, never fails at the same frame.
    But...at this point I'm OK.  Instead of an encoded file in MP4 I have an ecnoded H.264 rendition in the QuickTime MOV wrapper.  At least I've got that sequence done and can move on to the ton of others I need to get to (without having to learn an entirely new tool).  :-)
    John

  • We currently have one AI subscription until August 2014 and one ID subscription until DEC 2014. I now wish to subscribe to Creative Cloud Complete and take up the $29.99/Month offer.  I understand that Creative Cloud Complete would supersede the single ap

    We currently have one AI subscription until August 2014 and one ID subscription until DEC 2014. i now wish to subscrive to Creative Cloud Complete and take up the $29.99 month offer. i understand that Creative Cloud Complete would supersede the single applications. How many simultaneous logins are possible?

    One Adobe ID supports two activation of CC irrespective of the type (single/complete/Team). If you buy the complete CC with the same Adobe ID, it will allow to activate it two times though you you will be assigned space of single app cc + the complete CC.
    You can buy the Complete CC with a different Adobe ID.
    Regards
    Rajshree

  • Back in Dec I updated Itunes, with the new version, my IPHONE now I can no longer sync to Itunes. I have an IPOD that works fine but the IPHONE does not. What can I do?

    Back in Dec I updated to the new version of Itunes. Since then, I can no longer sync my IPHONE. I have an IPOD that works fine, but the phone is not found on Itunes. I am abled to download pictures to my computer, but I can not sync my music. What can I do?

    Click here and install the software.
    (71121)

  • Lenovo Drivers Insufficient for update to 8.1 - Driver problem - H430

    Lenovo Drivers Insufficient  for update to 8.1 - Driver problem  (USB?) - H430
    my lenovo H430 is about 6 months old - worked okay with preinstalled Windows 8
    After update to Windows 8.1 computer no longer seemed to work well at all, although I am unable to provide hard evidence, but clearly it was not working as smoothly as in the previous 8 version with lots of irritating little problems - including sound.  
    One thing that very clearly was not functioning as it had in 8 version was the USB disconnect icon. In 8 you only had to click on icon and the USB selection window would open immediately. Additionally all USB connections would be shown - back and front USB.  Select the USB to be disconnected and it would be disconnected immediately (providing not in use). After update to 8.1 this was no longer the case.
    In 8.1 disconnect icon no longer worked as it had done in 8. After clicking on icon there was now always a lengthy pause, followed by the sound of the computer working (whirring sound) and then after a while the USB selection window would finally open. Sometimes it was necessary to click on icon a few times to get any reaction at all. A small MP3 player I had charged up on my computer every morning (front USB) in windows 8, was always in USB list, and disconnected without problem in 8. In 8.1 it was no longer in list and only charged sporadically  (would stop charging, but if I clicked on USB  icon it would start charging again - although still not shown in USB list).
    After about two weeks of 8.1 my screen suddenly - but only briefly - went black twice. I ran a sfc /scannow. problems were found but could not be resolved. I did a  Dism /Online/Clean-Image/RestoreHealth  this was reported as being successful.  About two days later my computer went into blue screen BSOD - "critical-services-failure" - from which I was unable to get out of. The only option open was the Lenovo restore option. Computer was returned to factory state with los of all data.
    back to Windows 8 the computer once again worked okay - no problems - and USB icon once again worked correctly (including with MP3 player).
    About 2 weeks later after receiving MS messages to update to 8.1 I called Lenovo support and asked about update to drivers for 8.1.
    the following list was given:
    Chipset: Intel chipset Driver for Windows 8.1 (64-bit) Version : 9.4.0.1022
    Video: CPP2 AMD DISCRETE VGA CARD DRIVER for Windows 8.1 (64-bit) Version: 13.152
    Audio: Realtek Audio Driver for Windows 8.1 (64-bit) Version: 6.0.1.7030
    LAN: Realtek Lan Driver for Windows 8.1 (64-bit) Version: 8.018.0621.2013
    STORAGE: Intel RST Driver for Windows 8.1 (64-bit) - Desktop Version: 12.8.0.1016
    I updated to 8.1 and then updated all the above drivers (no USB driver update was available).
    The same problems as the last update to 8.1 and USB was as bad as it was in last 8.1
    Some days later my computer went into blue screen BSOD once again - although this time did not stay stuck there, and quickly restarted - due to speed of restart I did not get time to read all the text and discover the cause of BSOD.
    Computer is still running badly - particularly the USB icon disconnect.
    Called Lenovo support but they have been no help!!!!!!!!!!!!!!
    Lenovo are failing us with the 8.1 update and the  DRIVERS FOR 8.1
    BSOD
    all i could find was this: (probably refers to after BSOD - the restarting part after BSOD???)
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
      <EventID>41</EventID>
      <Version>3</Version>
      <Level>1</Level>
      <Task>63</Task>
      <Opcode>0</Opcode>
      <Keywords>0x8000000000000002</Keywords>
      <TimeCreated SystemTime="2013-12-20T08:12:33.642341400Z" />
      <EventRecordID>9644</EventRecordID>
      <Correlation />
      <Execution ProcessID="4" ThreadID="8" />
      <Channel>System</Channel>
      <Computer>myleno</Computer>
      <Security UserID="S-1-5-18" />
      </System>
    - <EventData>
      <Data Name="BugcheckCode">209</Data>
      <Data Name="BugcheckParameter1">0xb8</Data>
      <Data Name="BugcheckParameter2">0x2</Data>
      <Data Name="BugcheckParameter3">0x0</Data>
      <Data Name="BugcheckParameter4">0xfffff8000020170a</Data>
      <Data Name="SleepInProgress">0</Data>
      <Data Name="PowerButtonTimestamp">0</Data>
      <Data Name="BootAppStatus">0</Data>
      </EventData>
      </Event>

    I have now seen the suggestion by Tomaspoko and Brillow at http://forums.lenovo.com/t5/ThinkPad-Edge-S-series​/Windows-8-1-update-S440-ThinkPad-black-screen-wit​...
    Despite the AMD driver giving an error during install at the last stage of the suggested fix, this has now yielded a working switchable graphics for my S540 for the first time with Windows 8.1.  Catalyst Control Center also works for the first time, so thank you to both the above-mentioned posters for a solution that does work.
    Hopefully in time AMD will release a non-broken updated AMD driver and CCC package.
    Thanks again for a nice solution from this forum - the problem was driving me nuts!

Maybe you are looking for

  • How do I rename multiple files at same time?

    I'm new to mac...after 20 years of PC I've decided to join Mac, but I'm having trouble with something that was pretty easy on Windows. When I upload photos (or any kind of files) to my Mac, and I want all of the files to have the same name (with sequ

  • Oracle Apps 11.0.3  Reports and Tables.

    hi hussein, How do I know which tables/views in Oracle Apps 11.0.3 is still supported in Oracle Apps 11i (11.5.10.2)? Because I am migrating some customized Oracle Reports from (11.0.3) to (11.5.10.2). But there is no output generated because some of

  • FM for getting all days of week

    Hi, When I enter todays date FM should bring up all dates in a week. Eg: today if user enters 02/04/2009 It should give me values 3/29 , 3/30 , 3/31, 01/04,02/04 etc.. Do we have any FM for this? Rgds Praveen

  • Wrong DPI on iPad

    Hi, I have recently updated to AIR 4.0 from AIR 3.6, but now the DPI is wrong on iPad (3, with retina display). I have tried with and without <requestedDisplayResolution>high</requestedDisplayResolution>, but it's with the same result: all buttons, l

  • My iPhone 4S keeps making different sounds than I have set up in the settings. How can I fix this?

    I recently changed the sounds on my iPhone 4S in the phone's settings. I've done this many times before, but wanted a change. They worked at first, but now all of my notifications pop up with different sounds than I have set up. I've tried restarting