Leopard, Linux and Windows mixed networks

Oh oh so funny. I installed Leopard on my mac. I have a mixed network, with PCs, Macs and Linux machines.
I discovered that Leopard networking is a nightmare, something back like Windows 95. Is not a joke!
After installing with an upgrade from 10.4.10, all the Windows machines of my network disappeared. )-: . No way to see in the finder. But ok, using the terminal I can manage to use. But...
My real problem started when I tried to reconnect the drives from the Linux machines. The new networking act like Windows, Iit doesn't allow me to choice different passwords and usernames from each drives in the same server. Ok, I say myself "for the moment, I mount one volume, I use it, then I unmount, I mount another volume etcetera". Not so useful, but manageable. And here the second nightmare begin: Finder isn't able to disconnect my disk! I use the eject button, or the "disconnect" button and the disk remain mounted. I rebooted the machine. Same, the disk is mounted. I restarted both mac and linux machine. Same, it reconnect the drive )-: . So I'm locked to one drive of my server and I can't do nothing else.
If someone with a mixed network is experimenting the same issues, please help!
Thanks a lot!
P.S. I'm really disappointed. Before making jokes (with the PCs of the network displayed with the blue screen of death icon) they must use the time to test their system... and hey, please don't display the BSOD icon when the machines connected to the network are Linux computers (-: !!!

Read the hint is this blog about the Mac to Linux SAMBA fix.
Did you go to System Preferences->Sharing pane and turn on File sharing on (hit the 'Advanced' button to choose the kind of sharing protocols)?
Also do mix and matching from the articles File Sharing With OS X 10.5 - Introduction to File Sharing With Your Mac (for XP sharing) & File Sharing With Snow Leopard: Sharing OS X 10.6 Files With Windows 7 (for 10.6.x sharing). Mixing these two articles can help you share as long as you are in the same IP subnet.
Message was edited by: satcomer

Similar Messages

[SOLVED]Arch Linux, and Windows 8.1 Dual Boot issue

Hi guys. I recently bought a new laptop, and decided to run Arch Linux and Windows 8.1. I installed Windows 8.1 first as recommended by the beginners guide, and then installed Arch Linux. I made sure UEFI was enabled in my BIOS, and made sure everything was on a GPT partition. The install itself went fine. My laptop loads grub, and Arch Linux shows up and boots, but there is no option to boot into Windows 8.1. The only way I can boot into Windows 8.1 is by accessing my motherboard, and choosing to launch the windows boot manager instead of the grub launcher. How can I get Windows 8.1 to show up in grub? Thanks in advance guys.
Last edited by Painguy (2014-08-20 20:19:37)

Painguy wrote:
-----------Edit------------------
Yeah just ran this after installing os prober
grub-mkconfig -o /boot/grub/grub.cfg
and it works now. Sorry for the crazy posts guys. Thanks for the suggestions and help.
Yeah I'm sure I'm doing something wrong lol. I did not install OS-Prober. I think that's where the issue is. I'm missing the menu entry in grub.cfg right? Do I just run os prober or do I have to manually edit grub.cfg.
If that's not the case then here is what I did up until now. What I did was start with a blank SSD drive. I used cgdisk to make the disk use a GPT partitioning scheme. I installed windows 8.1 and checked in windows to make sure it boots into UEFI-GPT mode and it does. I then installed arch linux using the beginners guide. I made sure to use cgdisk to create any extra partitions, and installed GRUB to the efi partition that windows had created ( I did not format this partition ). I then finished the installation and rebooted, and Grub only shows arch linux. I don't think I'm dealing with anything MBR related. I made sure I used the GPT partitioning scheme....i think lol.
All you need to do is run os-prober then run grub-mkconfig. It should pick up Windows at that point.

How to set owner-only access file permissions both on Linux and Windows

Hi everybody.
I have the following problem. I need to store some private user information in file system. So I need to set owner-only access permissions for some directory in user home. I did not find API for doing this. As I understand this is platform specific thing. Could anybody tell me how can I do this both on Linux and Windows?
Thank you in advance.

More ideas just came back to me (of something I did before)
Each OS requires a different control.
For Windows you will need to set the .policy file for each user (a pain if you have more than a dozen of clients) granting access (R or RW) to files/directories.
Then you have to write some native code (access via JNI) to access/modify your authorization.
A more professional solution that I used was J-Integra (other similar tool exist).
Basically it is a bridge between Java and COM. It magically give you access to the COM API from Java (and vice versa).
In my case it was to read/write/modify Winword documents transfered between PC and server.
From memory you have to run the com2java.exe to build the bridge (classes in Java language) between the 2 families. Compile those classes and you have a "driver" for the COM (Microsoft Objects).
Here I must confess my ignorance on Microsoft.
Those COM objets must give you some easy/integrated access to the API for LDAP or Microsoft Active Directory Service (for centralize control with more complex setup).

Oracle DB sessions on Linux and Windows

Actually I am confused the way session memory is allocated on 32 bit windows and linux OS.
Windows is a thread based architecture where all user sessions are treated as threads of oracle.exe process. The addressable space is 4GB and oracle.exe can use up to 3GB in case you use /3GB switch in boot.ini file. It means that combined size of SGA ,PGA and other memory structures can not be more than 3GB. When a session gets connected with a database a PGA is allocated. It means that memory required by database sessions also comes from the 3GB limit. If your memory usage goes beyond 3GB you wont be able to connect new sessions with database or you would require to reduce the size of one of your SGA components.
Linux is a process based architecture where each user session is treated as a separate process and has its own addressable space. Even on 32bit linux the addressable space is 4GB i.e. 2GB for process and 2GB for kernel. It means we need to accommodate our SGA and PGA in the 2GB limit (there are ways to increase the size of SGA but let assume we are doing nothing to raise the 2GB limit).
As PGA is allocated for every session when it connects with database.
My question is how PGA memory is allocated against a database session on linux.
To further clarify my question I am stating the results of an experiment that I did on linux and windows.
On windows I set the total size of SGA to 1730M and PGA aggregate target to 1024M. I was able to able to startup the database instance without any issue. Then I started connecting sessions with the database and even ran a query doing a heavy sort in one of the sessions but after connecting 10 sessions with DB I started getting ORA-12500 TNS Listener failed to start a dedicated server process error on windows.
Then I did the same experiment on Red Hat Linux. SGA size was 1633MB and where as PGA aggregate target was only 10MB. I was unable to start instance when I set the SGA size more than 1633MB.
With that setting I was able to connect more than 200 sessions with database inspite of running query doing heavy sort in 4 sessions without getting ORA-12500 error. I was even able to connect more than 400 sessions with database after setting PGA aggregate target to 1GB on Linux.
Now my confusion is why linux was able to handle more DB sessions. I know it’s a process base model and each session is a separate process and has its own addressable space but as PGA is allocated against every session and PGA memory comes from 2GB limit then why PGA memory did not exhaust on linux. Is PGA allocated differently on linux as compared to windows?

Perhaps the problem is easier to understand if you leave PGA_AGGREGATE_TARGET out of this issue completely.
The out of memory problem you had, has nothing to do with PGA_AGGREGATE_TARGET setting directly. The difference in number of processes comes from architectural differences in how Oracle uses memory in windows vs unix.
On windows the SGA + ALL PGAs must fit into one 4GB address space (in practice even smaller as youve noticed). This is because there's only one process, oracle.exe. One process = one address space.
On Unix, you have many processes and every process can use portion of their own address space for PGA.
So, on windows (32bit) you run out of address space for the single oracle.exe process. On unix you dont hit this limit just because the number of processes grows (but if some process wants to use a lot of PGA memory, then they eventually run out of address space (talking about 32bit again))
On unix you probably ran into another limit - amount of total usable virtual memory (RAM+swap) available in your system
Tanel Poder
http://blog.tanelpoder.com

Why we have separate azure java SDK for linux and windows

I saw different links for downloading azure java SDK for linux and windows.
What difference does it actually have when java is platform independent? Or both are same jars?

Hi,
Thank you for your post.
It contains the same jar files.
Regards,
Mekh.

Problems using RMI between linux and windows.

I have problems using RMI between linux and windows.
This is my scenario:
- Server running on linux pc
- Clients running on linux and windows PCs
When a linux client disconnect, first time that server try to call a method of this client, a rmi.ConnectException is generated so server can catch it, mark the client as disconnected and won't communicate with it anymore.
When a windows client (tested on XP and Vista) disconnect, no exceptions are generated (I tryed to catch all the rmi exception), so server cannot know that client is disconnected and hangs trying to communicate with the windows client.
Any ideas?
Thanks in advance.
cambieri

Thanks for your reply.
Yes, we are implementing a sort of callback using Publisher (remote Observable) and Subscribers (remote Observer). The pattern and relative code is very well described at this link: http://www2.sys-con.com/ITSG/virtualcd/java/archives/0210/schwell/index.html (look at the notifySubscribers(Object pub, Object code) function).
Everything works great, the only problem is this: when a Publisher that reside on a Linux server try to notify something to a "dead" Subscriber that reside on a Windows PC it does't receive the usual ConnectException and so tends to hang.
As a workaround we have solved now starting a new Thread for each update (notification), so only that Thread is blocked (until the timeout i guess) and not the entire "notifySubscribers" function (that contact all the Subscribers).
Beside this, using the Thread seem to give us better performance.
Is that missed ConnectException a bug? Or we are just making some mistake?
We are using java 6 and when both client and server are Linux or Windows the ConnectException always happen and we don't have any problem.
I hope that now this information are enough.
Thanks again and greetings.
O.C.

Different stringWidth between Linux and Windows

When I use Ms Windows Arial Font in my Java Program running on Linux
I found out the rendering result of the Font is different with same program running on Windows
The Arial Font in Linux become wider, and this cause problem because i used absoule position.
I am using Java 1.3.1, How can solve this problem??

The Arial under Linux and Windows are not the same. Firts, they may be different font files, second, both systems uses different rendering engines to draw them. Also, some systems, as mine, won't have Arial font at all - substitute font will be used then. So, I would expect, you will have similar problems with any other font, any other operating system or even in some specific locales which uses reversed (right-to-left) line ordering. You will also be not able to do internationalization properly.
Simply your application is not portable and written with breaking may portability rules. I hope, you are not doing it for money. The layout managers is the only existing aswer to your problem. The closest to absolute is a SpringLayout introduced in 1.4.x.
The absolute location problem is not a bad thing in Java only - it can screw C, VisualC and CBuilder applications. Take some of them and tweek your system settings - use large fonts for buttons, tiny fonts for menu, change whatever OS provides you to be able to change in L&F and look what will happen with some of those applications. I would be really happy to have layout managers in CBuilder.
regards,
Tomasz Sztejka.

Font differs from Linux and Windows ?

Hi, i just want to ask, are fonts different from windows and linux in applet. I use a standard courier font.
For example, if i make an applet with courier font texts in linux, and make the texts wrap themselves, they will run ok in linux. But if i run the compiled applet in windows, the wrapped text somewhow got truncated.
But if i compile the applet in windows, it will look ok in linux and windows.
I've tried replacing my courier fonts in my /usr/java/jdk/jre/lib/fonts/cour*.ttf with the cour*.ttf from c:\windows\fonts with no effects .. Applets compiled and run ok in linux doesnt work in windows. They must be compiled in windows to run ok in both.
Why is that ?
Does the compilation use the fonts in the jdk lib or the system fonts ?
I'm so confused T_T
Please Help

How do I get Mac OS 10.4.4 and Word X for Mac to see
all the characters in the Word for PC document
formatted in Times New Roman?
There's no way with Office X, which can't do Unicode Greek. You need to upgrade to Office 2004 which is Unicode-savvy and installs in your Mac the same Times New Roman with Greek, Cyrillic, Hebrew, and Arabic which is used by WinXP. An alternative might be AbiWord or NeoOffice/J.

CD different for Linux and Windows

I have in hand a very strange CD. This is an (old) CD with drivers for a Samsung printer. The CD has drivers for Linux and Windows. But if I mount the CD in Linux, I see only the Linux driver and if I access the CD from Windows, only the Windows drivers are seen. How they can do that ? How can I mount in Linux the CD in order to see the content seen from Windows ?

In Windows ( DIR D: )
Le volume dans le lecteur D s'appelle SAMSUNG_LBP
Le numéro de série du volume est C432-A954
Répertoire de D:\
28/02/2005 00:53 <REP> ACROBAT_READER
26/10/2004 06:11 740 AUTORUN.INF
28/02/2005 00:53 <REP> DATA
28/02/2005 00:53 <REP> ML-1610
28/02/2005 00:53 <REP> Manual
09/12/2004 03:55 11 219 SETUP.DAT
20/09/2004 07:29 270 336 SSAuto.Dll
17/09/2004 08:03 253 952 SSEtc.dll
22/09/2004 11:09 225 280 SSFcs.dll
12/03/2004 05:59 1 622 016 SSRes.dll
17/09/2004 08:04 155 648 SSTtp.dll
26/10/2004 05:42 307 200 Setup.exe
28/02/2005 00:54 <REP> USB
8 fichier(s) 2 846 391 octets
5 Rép(s) 0 octets libres
In linux (ls -l -F /mnt/cdrom)
total 44
dr-xr-xr-x 22 root root 4096 Feb 28 2005 Manual/
-r--r--r-- 1 root root 2555 Feb 28 2005 README.txt
-r-xr-xr-x 1 root root 51 Feb 28 2005 autorun*
dr-xr-xr-x 3 root root 2048 Feb 28 2005 bin/
dr-xr-xr-x 8 root root 2048 Feb 28 2005 cups/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 data/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 help/
-r--r--r-- 1 root root 8517 Feb 28 2005 icon.xpm
dr-xr-xr-x 9 root root 2048 Feb 28 2005 locale/
dr-xr-xr-x 2 root root 6144 Feb 28 2005 misc/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 ppd/
dr-xr-xr-x 2 root root 2048 Feb 28 2005 scripts/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 setup.data/
-r-xr-xr-x 1 root root 6603 Feb 28 2005 setup.sh*
ouput of isoinfo -d dev=dev/sr0 (in linux)
CD-ROM is in ISO 9660 format
System id: LINUX
Volume id: SAMSUNG_LBP
Volume set id:
Publisher id:
Data preparer id:
Application id: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
Copyright File id:
Abstract File id:
Bibliographic File id:
Volume set size is: 1
Volume set sequence number is: 1
Logical block size is: 2048
Volume size is: 239152
Joliet with UCS level 3 found.
SUSP signatures version 1 found
Rock Ridge signatures version 1 found
Rock Ridge id 'RRIP_1991A'
If I use on Windows the Windows port of cdrtools; then these tools behave as in Linux, showing me the Linux contents. In Linux I can also mount -t udf and then I see:
total 32
-rw-r--r-- 1 root root 32768 Feb 28 2005 Desktop DB
-rw-r--r-- 1 root root 0 Feb 28 2005 Desktop DF
drwxr-xr-x 1 root root 22 Feb 28 2005 Manual/
This was for a Samsung ML-1610 B/W laser printer. This is crazy.
@lolilolicon That explain the result when I mount -t hfs. But the difference in Linux and Windows remain mysterious. How Windows "mount" the CD? I believed it was the equivalent of mount -t iso9660 in Linux but apparently, it is not.
Last edited by olive (2011-09-08 12:12:16)

How to link Linux and Windows?

hi,
i would like to build an application which can link both linux and windows together so that the linux's users can communicate with windows's users without problem. But i don't know which java's technologies used to do this job. Java CORBA? Java RMI? or others? Can you help me?
thanks a lot.
from
mercy

if i want to build a messaging or chat program like ICQ, java.net package can be used so that ICQ Linux's users can send messages to ICQ windows's users?

What versions of Linux and WIndows are supported?

I have looked on the web site, and cannot find what versions of Linux and Windows are supported? Most of the documentation just says Linux and/or Windows, with no referenence to version.
My specific questions are for Oracle Personal server:
Is it supported on
Windows XP Professional
Windows XP Home Edition
Red Hat Linux 7.3
Red Hat Linux 7.2
Red Hat Linux 8.0
Red Hat Linux 9.0
RHEL 3.0
If yes to all or some, what is the best OS/Version to install the Oracle Personal Server on? Considering performance? Ease of install and use?
Thanks,
Tomas

Joel:
Thanks. But, when I tried to create an acct in metalink section, it said I needed a "support identifier". When I researched this, it seems I can only get a "support indentifier" if I have a valid support contract.
Now, that seems a bit of "the cart before the horse", as I am thinking of buying the Oracle Personal Server, but have not.
And want to know supported platforms before I do buy. But, now it seems I have to buy, to get my pre-sales question answered.
Is there another place I can find this info, possibly a pre-sales area of the oracle web?
Rgds,
Tomas

Multiboot with LINUX and Windows

Does solaris support multiboot with UNIX, LINUX and Windows.
All of them in the same disk on primary hdd.
thanks

Hello pradyut. It is not possible to boot Solaris 10 from Linux GRUB since Sun uses a modified GRUB which can deal with SUN partition 'slices'. The opposite (Sun grub booting Linux), however, is really easy to do. If you installed Solaris last you can edit Solaris /boot/grub/menu.lst and just add another entry the same as the Windows menu entry, except for the changed name and partition number.
So, for example, with a Windows entry similar as follows:
title Windows
     rootnoverify (hd0,0)
     chainloader +1
just copy/paste it where you want it to go and edit as follows:
title Linux xx.. <- you put whatever title you wish here
     rootnoverify (hd0,X)
     chainloader +1
..where X = the correct partition number of the Linux /boot code. If your Linux /boot directory is installed in the second physical partition (directly after Windows), for example, X would be 1 if a primary partition, or 4 if the first logical partition.
If you are not really sure what partition number to use (this can be confusing and difficult to even describe), you could easily discover the correct partition number by trial and error, or run (in a Linux console) df -h. A wrong partition number entry will produce a harmless GRUB error and return you to the Solaris boot menu to try again.
If you look at the Grub documentation, you will find that it is really even easier to make these changes on the fly (while actually booting). Highlight the Grub menu item via the down-arrow, press ESC, then E. This will allow you to edit that line, and quickly change the 'X' number and try it. Type <Enter> once your edit is done, and then highlight the menu entry to boot, and type B.
Either way, you can return to Solaris /boot/grub.menu.lst and put in the correct number and it will always boot the Linux loader even after updates, reinstalls, and kernel upgrades.
Also remember that if you are using logical partitioning in one of the physical partitions, the first logical partition is always HD0,4 (assuming hard disk 0) whether there are 4, or less than 4 physical partitions.
I hope this helps!
pm..

I18N jsp application on linux and windows

This is regarding the damage of polish messages from struts application
deployed on Tomcat on Linux and Windows XP .
I get polish messages from SAP that to be displayed in JSP page.
I have set ISO8859_2 in JSP page for charset.
<%@ page contentType="text/html;charset=ISO8859_2" %>
I have set encoding attribute in web.xml as below
<?xml version="1.0" encoding="ISO-8859-2"?>
This is working on Windows XP.
But I get Question marks and differents characters for polish messages from
application deployed on Linux
prosz? sprawdzi? Wpis.
Please help if I need to do anything in tomcat server or in OS .. __.____._

http://forum.java.sun.com/thread.jspa?threadID=5263693&messageID=10098736#10098736

Connect as sysdba between Linux and Windows without using password

hello
Hello
I need to connect as sysdba between Linux and Windows without using password for the sys user
Sqlplus /@string_connection
Plz help me

Duplicate post:
Connect as sysdba between Windows and Linux
Actually you have been given the answer in your above thread. You need to read the Oracle documentation. Search password file at tahiti.oracle.com
regards

Running jar in Linux and Windows

Hi
I created a jar file in Linux and it is running fine under Linux.
But when I tried to run the same jar under windows,I got the following error
Exception in thread "main" java.lang.NoClassDefFoundError:
Is there any difference between running jar files in Linux and Windows?

Hi
I have a jar(say program.jar) containing a program which uses some libraries(again some jar files).The manifest file is written to look for the library jar files in the current directory.
Main-Class: package_name.program_name
Class-Path: fits.jar image.jar util.jar myutil.jar
But while running the jar file in WINDOWS (java -jar program.jar <parameter list>)
the following error occurs:
Exception in thread "main" java.lang.NoClassDefFoundError:
nom/tam/fits/Data"
the class Data is present in the fits.jar jarfile.
The same jar(run in the same manner)does not give any problems in Linux

Leopard, Linux and Windows mixed networks

Similar Messages

Maybe you are looking for