Less source fields in transformation than in the source DSO

Hi,
I'm in a business content flow DSO 0GN_BP (consolidated BP) to fill master data attribut 0GN_VENDOR.
In the transformation source fields I only have a part of the fields in the DSO.
17 fields in DSO and only 10 in the source fields in the transformation.
<b>How can I get all the fields of the DSO as source fields in the transformation ?</b>
Regards,

I've log out log in, refresh the hierarchy etc. Nothing.
I hit the right DSO with the transformation.
The DSO is activated as well as the infoobject inside.
I've tried to reactivated it just to be sure ... but still missing fields in transformation.
I've also reactivate the DSO. Run RSRT on DTP, DSO ... all green.
I've check the structure tables of the DSO and they all got the right number of fields.
This is really weird. I'm going through a customer message.
Thanks for your help. I'll come back here if SAP found a solution.

Similar Messages

LSMW - The source field is longer than the target field in MEK2

Hi,
I tried to create a simple LSMW script to end date condition records using MEK2 transaction.
I provide Condition type, Plant, Material, Start Date and default Valid from and Valid to dates.
When the program is generated, it defines just 1 character for Start date and when I try to map the date field from source, it gives following error message.
Attention: The source field is longer than the target field.
Message no. /SAPDMC/LSMW_OBJ_040013.
Not sure why it is happening. I am on 46C.
Please let me know if anybody come across such situation. I have checked all aspects, tried recreating in different systems but ended up with the same problem.
You help in this regard will be highly appreciated.
Regards
Kasi

It is a standard error, and I have not found any OSS note to fix it. In order to solve it, you can use this workaround:
- Export the recording into a txt file
- Edit the file, and modify the information correspondent to domain, data element and lengths (internal and external) fields, and save it
- Import the recording
For example, I had problems in a recording with the field SEL_DATE of the transaction VB02. Then, I changed these values:
Values before changes:
/SAPDMC/LSGBDC ZTEST ZVB02_ZA01 0018 0000 SEL_DATE DATE_ON Valid on CHAR1 CHAR1 SEL_DATE 0000000000 000001000001000001CHARC
Values after changes:
/SAPDMC/LSGBDC ZTEST ZVB02_ZA01 0018 0000 SEL_DATE DATE_ON Valid on DATUM DATAM SEL_DATE 0000000000 000010000010000010CHARC
(values 01 has been replaced by values 10)
The values changed correspond to fields:
/SAPDMC/LSGBDC-PARDOMAIN
/SAPDMC/LSGBDC-PARDATAELEMENT
/SAPDMC/LSGBDC-LENG
/SAPDMC/LSGBDC-INTLEN
/SAPDMC/LSGBDC-OUTPUTLEN
The information that you have changed should be updated in table /SAPDMC/LSGBDC, where all the information of the recordings is stored. Check this information has been updated after recording import.
I hope this solution be useful for anyone...
Regards.

Language field is not maintained in the source system

hi,
I had problem with 0ehs_actn_text data source. when i'm trying to pull data to BW it's saying language field is not maintained in the source system.
I check the datasource there is no language field in the extract structure. and No fileds are checked for slection. I found one field REFOBJ checked in the data selection tab of datasource. But the data not coming to BW side.
could anyone help.
regards
kumar

hi kumar,
Check in rsa6 TXTLG field should be there and it should not be checked in HideField Tab.. then only the data will populate to BW..
So make the things properly and once again replicate the data source in Bw side.. load the data..
other wise if u dont wanto the language field in Bw side goto infoobject maintanance uncheck the "TExt Language dependent" option in masterdata/texts Tab.. save and activate it.. load the data..
i hope this will help you..
Thanks..
ravi.p

How to put an asterisk in the field label rather than on the field in Infopath

For a mandatory field in Infopath, we know that the red asterisk shows up always on the control. Is there a way we can make it appear on the label instead.
In the figure below, can we have the red asterisk on the label where ? symbol is present ?

Hi Prajk,
From your description, my understanding is that you want to put an asterisk in the field label rather than on the field in Infopath.
By default, the asterisk is on the field, not the field label. If you want to put an asterisk in the field label, per my knowledge, you need to develop the column to do it.
For developing InfoPath controls, I suggest you create a new thread on Visual Studio Tools for Office forum, more experts will assist you with Office development.
VSTO:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsto
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Data Source Z*** is not defined in the source system

Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?

Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny

Customized delta data source for deleting data record in the source system.

Hello Gurus,
there is a customized delta data source, how to implement delta function for deleting data record in the source system?
I mean if there is record deleted in the source sytem, how to notify SAP BW system for this deleting change by this customized delta
data source?
Many thanks.

Hi,
when ever record deleted we need to write the code to insert the record in Z table load this records into BW in a cube with similar structure.while loading into this cube multiply the Keyfigure by -1.
add this cube in the Multi Provider.The union of the records in the orginal cube and the cube having deleted records will result in zero vale and will not be displayed in report .
Regards,

How to know querry level fields from which tables in the source system

Hi Experts,
let's say we've two fields in the querry e.g: Actual GI Quantity, Actual Value of GI
This fields from PP Querris level how would i know from which table we're getting data is there any easy process to find out please drop your suggestions..
Next doubt is when generate querry e.g. PM Module we don't know exatly what're the available tables & fields technical names but in my currently project using SAP Delivered Infocubes & Querries at the moment & generating querries but when we test in the Portal it's shows some fields '0', X. I've to check in source system weather it's having any values or not.
Can anybody drops your valuable words
Cheers
Suresh

Hi all,
I'm a colleague of Maarten, and I think maybe we didn't explain well enough what we want. So let me try to elaborate:
We want to obtain the reference (within the SOAP-Body of the XI-message) to the attachment which contains the main payload (at least, in XI itself). This reference seems to have gone missing, once our adapter module (after having gone through XI) is entered (and, by the way, before we enter the SOAP-receiver-adapter).
The JAVA-representation of the XI-message seems to hide the fact that in XI itself, the main payload is an attachment, referenced from within the SOAP-Body.
Nevertheless, we would like to obtain/retain(?) that reference, in order to put it in our own to-be-created-additional-attachment, which would go (via the PayloadSwapBean-module of SAP) into the SOAP-body of the final SOAP-call, and should then reference the 'new attachment' (which was (in XI itself) the main payload).
So, I think both answers (up to now) don't help us much (however: thanks for your reaction anyway of course).
So, maybe someone has another idea?
Regards, Fred

Language field not maintained in the source system

hi,
I had problem with 0ehs_actn_text data source. when i'm trying to pull data to BW it's saying language field is not maintained in the source system.
I check the datasource there is no language field in the extract structure. and No fileds are checked for slection. I found one field REFOBJ checked in the data selection tab of datasource. But the data not coming to BW side.
could anyone help.
regards
kumar
Message was edited by: S Kumar

hi kumar,
Check in rsa6 TXTLG field should be there and it should not be checked in HideField Tab.. then only the data will populate to BW..
So make the things properly and once again replicate the data source in Bw side.. load the data..
other wise if u dont wanto the language field in Bw side goto infoobject maintanance uncheck the "TExt Language dependent" option in masterdata/texts Tab.. save and activate it.. load the data..
i hope this will help you..
Thanks..
ravi.p

Routine - get char 2 to 5 from the source value

Helo friends,
I have a requirement like below
i have a char and data type is numeric(5) and value of the char is A1234
now i need to load the data to DSO with value 1234 , since its datatype is numeric and i have to ignore 1st value i.e. 'A'
so, i have to write a start routine in transformations to get the values from 2 to 5 of the source field, can anyone provide me the routine
Thanks,
SR

Hi Stefan,
Thanks for quick response.
I written the same in transformations for that object, but it is throwing error as 'COMM_STRUCTURE-/bic/xxxx' is unknown. its neither in one of the specified tables nor defined by a 'data stmnt'
i think the way we write routine in bi7 is different ?
Thanks
SR

ITunes cannot locate the source

I moved my iTunes sources (the original MP3s) from disk C to disk E; then iTunes told me it cannot locate the source. I can either move the source back or locate them myself. However, I just don't want to move the source back but I got like hundreds of songs... Is there a better way than locating them 300 times? It's like one thousand clicks if I do that...

I recommend you put them back and then let iTunes move the files across drives. Follow the instructions in this article: http://support.apple.com/kb/HT1364 .

Re: getting the source tables into models in designer

Hi all
i need help while extracting the source table's to ODI designer
my source: Oracle
Question:
i have given the source schema information. with that information i created logical and physical schema in topology manager.
And trying to create a model to extract source tables to ODI.
As i don't have all tables in the same schema (some tables were coming from different users and i don't have the information of those users) am unable to see the those tables when in selective reverse tab.
i requested them to give select privileges for those tables in the schema which am using.
after getting the select privileges for those tables.
will i would be able to see those tables in selective reverse tab?
Could some one guide me steps in this.
Thanks

917704 wrote:
Hi Alastair
firstly thank you for your reply.
my soure is oracle erp.
i cannot create physical/logical schemas for that user bez as it is head user in oracle erp, i dont have the access for that user.Hi, I've done change data capture from ebusiness suite using ODI, what we did was this :
get a 'read only' database account set up in the ebiz suite database, this is your connecting user and your work schema (for CDC objects).
grant select any table, or be more specific if you wish on the objects you need to read data from to ODI, then connect as your read only user but map the physical schemas as you wish.
Back to your original question, a model can only have one logical schema, which in turn maps to one phyiscal schema - so I think your stuck needing to read across more than one schema on the source system.

How the source list is created automatically

Hi all,
Cud any one tell me is there any way to create the source list automatically. as per my knowledge we need to give the tick for the plants we want the source list should be made mandatory while creating the material master.
How can be make the Source list field for the Purchasing view mandatory while creating the material master .

Hi,
You can have the system generate a source list for a material automatically. The system offers you the possibility of quickly entering or updating all source list records for a given source list.
With this procedure, a source list record can be created for each info record and/or each outline agreement item for one or more materials.
You can create the source list for several materials (collective procedure) or a single material (individual procedure).
Prerequisites
Before you create source list records, consider the following:
For which materials/plants are the source list records to be generated?
Are only outline agreement items, only info records, or both be taken into account? (Decision only in the case of the collective procedure.)
What is the validity period of the source list records to be generated?
Do source list records already exist for the materials for which you want to create source list records? If so, you must decide whether the old records:
May not be changed
Are to be deleted
Are to be excluded from the validity period of the generated source list records
Activities
Collective Procedure
With this procedure, you generate the source list for several materials.
Choose Master data Source list Follow-on functions Generate.
Enter the necessary data.
Create the source list.
A list of the source records to be generated is displayed. Already-existing source list records whose validity periods are thus changed are also listed.
Select the source list records you want to include in the source list.
Fixed or blocked source list records: You can mark a source list record as "fixed" or block it. A "fixed" source represents the preferred source of supply, whereas a "blocked" source is one from which you are not allowed to order. Select the desired source list record. Then choose Edit Fix, or Edit Block.
Choose to store the selected source list records for the displayed material in the source list.
Exception messages are displayed by the system. Press ENTER to continue the saving process.
Individual Procedure
With this procedure, you generate the source list for a single material.
Choose Master data Source list Maintain. The initial screen for the source list appears.
Enter the material and plant number. Then press ENTER to display the overview screen.
Choose Edit Generate records.
In the dialog box which appears, enter the validity period of the source list records to be created.
First determine how existing source list records are to be treated if their validity periods overlap with the one specified. To do so, set the appropriate indicator in the dialog box. Press ENTER . The source list is created.
Click to save the source list.
BR
Diwakar
reward if useful

Error occurred in the source system

Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
    The sequence for creating time series in LiveCache is:
    1. Characteristic value combinations are created which in turn create
        planning object in the system
    2. The combination of version, planning area, and planning object is
        initialized, creating time series in LiveCache. This combination is
        so to speak the LiveCache anchor.
    This error occurs if
    o   New characteristic value combinatons have been created for the
        master palnning object structure that is assigned to the planning
        area, but the time series objects were not created.
System response
     Processing cannot continue.
Procedure
     There are two methods of creating time series objects for individual
     characteristic value combinations:
         a) Re-initialize the version without deleting the time series
             objects beforehand.
         b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
     In general SAP recommend that when you generate new characteristic value
     combinations, you set the Create time series objects indicator. This
     prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
Tyson

Hi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang

Eclipse: what to include in the classpath in order not to export the source

Hi,
When exporting a war file from Eclipse and unchecking the Export Source file checkbox, I am getting the source code in my war file.
I think this is related to the classpath. Does anyone know what should I do??
Thanks.

Its not about classpath, it about the ant script you are using to build the war file. Make sure that the script doesn't extract all the source code into war file.

Need to find the source code for java.util.LinkedList

Hello all,
I'm new to the forums and I actually need the LinkedList source file as well as all the source files for all Java packages and libraries. Please post a link here if you can, or email me at [email protected]
Thanks again!
copter_man

But those must be platform dependant, not really that
interesting to look at. I have never felt any need to
look at those at least.Wake up and smell the coffee, abbie! I read the source code all the time and constantly tell my students to do that, too.
1. Java source code is not platform dependent. The original poster wanted to look at linked list code, how could that be platform dependent?
2. It is the implementation of the SDK APIs, so by definition it is implementation dependent code, liable to change in a later version. So don't assume anything beyond what is claimed in the API documentation. However, sometimes the documentation is incomplete or ambiguous to you, and reading the source can provide some insight, however implementation dependent. (Light a candle or curse the darkness.)
3. Why read source code? It's a good way to learn how to program. You see something in the API and ask: how'd they do that? Or you realize you want to do something broadly similar, but you can't reuse the source code.
For example, Images are not Serializable, but suppose you want a small image that is part of an object to be serialized with the rest of the object without too much fuss (ie, without using javax.imageio). You notice ImageIcon is serializable, so you use it. (An ImageIcon has-an Image.) Then you wonder: how'd they do that? You read the source and then you know.
You live, you learn,
Nax

Less source fields in transformation than in the source DSO

Similar Messages

Maybe you are looking for