Levels, Filters, bunch of others just stopped working
Hi--
A whole bunch of stuff has just stopped functioning in my PS CS3. I can add a levels adjustment later, that works fine, but not Levels itself. for example. Or any filters I can see. They open, but don't do anything.
I have tried restarting the app, but that doesn't do it...
Well-- I have no idea what happened. I just started working on other stuff and then it suddenly started working again...
In any case, thanks for the assistance :)
All My Best,
Jeffrey
Similar Messages
-
2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light
The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives. -
I just got a new macbook pro (my other one stopped working). I am trying to sync the music on my iphone to my new mac's itunes library. I've clicked sync in iTunes but it doesnt work. how can i do this? I don't want it to delete everything from my phone or old computer.
hstarkeyy wrote:
I don't want it to delete everything from my phone or old computer.
You don't need to delete anything from your phone or you old computer.
Copy the entire /Music/iTunes/ folder from old computer or backup to /Music/ on new computer.
If you cannot use the old computer or don't have a backup...
-> Recovering your iTunes library from your iPod or iOS device
Then immediately make a backup of your new computer.
Get an external drive and plug it in and use -> Time Machine -
My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty? I have not dropped it in water or anything. It was a normal day and I had 20% battery and I tried to charge my phone and it wouldn't charge. The charging pug box works fine with other phone USB cords so I know its something to do with the charging cord.
Eklms wrote:
My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty?
Yes.
Everything is included in the warranty. -
My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?
Yes... to no avail
-
I bought an ipad mini the other day and Siri just stopped working today
I bought a new ipad mini in store of Thursday and was very pleased. Siri was working all well but then today it just stopped working. It isn't picking up and sounds through the microphone. What should I do?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Mail server has just stopped working. No errors in any log. Help!
I am running OS X Server 3.0.2 on Mavericks 10.9.1. Today at around 14:30 my Mail server, which has been working fine for over a year and for nearly a month under Server 3.0.2 just stopped working! I have tried stopping and starting Mail in Server.app and via ServerAdmin but the servcies will not start... serveradmin claims that IMAP is running but that SMTP/SMTPD/Virus Scanner/SPAM filtering/Virus updating are not. I tried disabling the all the filtering services but to no avail. Even though it claims IMAP is running I cannot connect from any client...
I have rebooted the machine but this did not help. I have looked at all the logs (system, mail, dovecot, postfix, amavis) and theer are no suspicious messages in any of them!
I am out of ideas and my mail server is down which is very serious so if anyone has any ideas please pitch in.
Thanks.My problems were:
1. Server.app shows the Mail service stuck in 'starting' status
2. serveradmin shows that IMAP is running but SMTPD, Spam filtering, Virus filtering and Virus updating were STOPPED.
3. No clients could connect to either IMAPS or SMTP.
Diagnostics performed:
All the various messafge logs (system.log, Mail.log, mail-info.log mail-err.log, amavis.log) show no abnormal messages.
DNS is working just fine.
In the end I did the following:
1. Stop all mail related services.
2. Make a safe copy of /Library/Server/Mail/Config
3. Restore the previous days version of /Library/Server/Mail/Config from backup.
4. Start the Mail service
And all was working again just fine.
I then did a file by file compare of all the configuration files between the workign and not working configurations and I found just the following two differences in postfix/main.cf:
Not working:
inet_interfaces = loopback-only
smtpd_helo_required = no
Working:
inet_interfaces = all
smtpd_helo_required = yes
I don't think the second difference is so critical but the first seems to break everything (not too surprising I guess). All the other files were identical.
So, the good news is that all is working again but the huge concern is why this change happenned, seemingly at random. My strong suspicion is that Server.app, at some point when I exited it havign made some minor change unrelated to mail decided to apply these incorrect changes to the Mail configuration. Why it would do this is beyond me. I think there are some subtle bugs in Server 3.0 (and maybe Server 2.2 as well)... -
Hi Everyone,
I hopw someone has some info that might help.
I have a MacBook and PC (yuck). Both just stopped working with my Airport Extreme, and when I tried plugging the ethernet cable directly into both, nothing happened. No data was transferring.
I called my cable company and they were able to get my PC working, directly connected, but not the MacBook.
When the ethernet cable is plugged directly into the MacBook, nothing happens...no lights showing it's connected to the computer. When I connect the ethernet cable to the Airport, everything lights up, showing a connection, but I can't get the data to transfer from Airport to MacBook (or PC for that matter).
Right now, I'm hijacking someone else's wireless signal in my condo...don't really know who. So, I know my Airport card is working properly.
The tech at Brighthouse cable saod something about earthlink customers having trouble recently because of something that earthlink downloaded to them, where IP addresses wouldn't renew. I never downloaded anything, is this possible?
I'm really stumped, and frustrated because I can't connect, and it's not feasible for me to hardwire in due to the location of my cable modem. Plus, that only works with the crappy PC, and I don't want to use that.
Please, someone help...I'm desperate...and at a loss for what the problem could be!
Thank you!!!!
EDIT: I just powered up my old iBook G4, and it won't connect to my base station either
EDIT X2: I should probably add what I have already tried...I have (several times) unplugged the cable modem and Airport base station. Used Airport set up to re-set it (again, several times).Ok MCOJerry,
Here's the scoop.
My friend called and gave me the story much like you described. Almost identical in fact.
He had called TimeWarner, who didn't come to any resolution and then referred him to Earthlink, washing their hands in the process.
A over seas tech support then spend a couple of hours, then made a call back with another tech. who also spent significant time on the phone. This time the tech reconfigured OSX a couple of times. Set up alternate location profiles, changed the DNS settings etc.
They re-assigned the IP address and forced the cable modem to init. the MAC address list. They also disconnected the Airport Extreme (the square version) connected the mac directly to the modem and forced a manual set of IP settings.
They got the mac to work with this last configuration, but of course the rest of the machines were out of luck as was the network printer.
All in all he spent six hours on the phone.
When I got 'the call' I had him give me some preliminary network stats and then had him reconnect the Airport Extreme. This yielded a dead internet connection.
So as I wrote earlier, I went over there armed with a boat load of tools & cables.
I reconfigured the mac to a normal & stable automatic type configuration. I also reset the the Airport buy pressing the reset button for 5sec. Then set up a new configuration. I made sure that the latest update was applied to the Airport extreme.
Then I logged on to the cable modem. Don't mis-understand, I did not log on to the internet through the modem. I logged on to the modem's internal web server. checked some logs and ran a couple of tests.
Then I found the problem. The real problem: The signal power level from the point of demarcation (at the pole) was so low as to be useless. Eliminating the Airport Extreme, simply removed a level of complication in the system. It also may have removed some spurious RF that may have been introduced into the network. It did not result in a resolution to the real problem.
The cable line needs to be physically repaired. Either a wet connection or a frayed shield or the line needs a booster. But the problem, which looked like a Airport extreme issue is in fact a bad cable line.
I do have him up and running on the Airport Extreme at this moment by eliminating all extraneous length from his cable line within the house. The cable modem is now located in the basement where the cable enters the house. I have an single ethernet cable running from there to the Airport Extreme. I pulled all the other electrical items from this particular power line branch (This specific circuit.) This is all temporary until the cable guy/gal arrives to fix the problem.
I hope this may help you in your trouble resolution.
-Alan
Specs:
Motorola SB 5100 Cable Modem.
minus (-)5db signal power level
Software Version: SB5100-2.3.2.5-SCM01-NOSH
Hardware Version: 3
MIB Version: II
GUI Version: 1.0
VxWorks Version: 5.4
OSX 10.4.9
Airport Utility 5.1 (510.18)
Airport Extreme Base Station (square model) V7.1
Open DNS
208.67.222.222
208.67.220.220
AlBook, TiBook, iMac, iBook Mac OS X (10.4.9) Corporate / mixed environment / multiple networks. -
My ipod has just stopped working. I was listening to it this morning and there was more than enough charge in it. I go to turn it on now and nothing, checked to make sure it was not locked and still nothing. Connected it up to the computer and it doesn't even see it as and external device - it's just dead. I only purchased this ipod less than 60 days ago. I did have a weird thing happen about 2 weeks ago as well.......the music stopped and all the pictures were scrambled lines all the graphics on the ipod were gone. I did manage to reset and re sync with my computer that time, but I'm thinking maybe I got a lemon? How do I go about getting this issue resolved? Looking forward to anyones suggestions. BTW I did try to take it back to Walmart where I purchased it and they won't take it back after 10 days what a bunch of crap.
Just got this from some else's question about a dead ipod and this worked...Thanks glad I visited the site.
You may need to reset it. So first thing to try is...
Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
If it doesn't work the first time, give it a second or third go. Sometimes it takes a few/several tries.
See this thread as an example of what I mean by needing to try it many times...
http://discussions.apple.com/message.jspa?messageID=5065208
http://www.apple.com/support/ipod/five_rs/
Patrick -
TNSping ok..can't connect with sqlPlus ...just stopped working
Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL> -
On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?
I have windows 7 on both computers and I use the paid version of Roboform (which does not encounter any problems!) So, I really need my sync to work and keep working. Please help......Do you mean that after closing the browser your Sync set up is gone and you need to Set it up again?
This is, generally, because your privacy settings are too restrictive and you are deleting the password of your Sync account.
You can modify this in the Privacy tab of your Preferences/Options window. Select Remember History or Use Custom Settings in the drop down to configure the level that you want. -
Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi. Will next release of iOS address this problem?
Hey there kevin8!
I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
Cheers,
Braden -
Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??
This previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990 -
Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!
I totally feel for you. Just upgraded from cs4 to cs5 and it was the biggest mistake i ever made. It will probably end my livelihood as a photographer since EVERY time i open a raw file it crashes photoshop, makes it freeze up after i have adjuted the file in camera raw then I hit open; i get a few bars then it just stops working.
Even got tech help, which helped when i was on the phone with them. The next day the problem came back even when I danced the same jig that I did when I had the guy on the phone - he had me move a raw file on to the desktop rather than take open from my hard drive, then I was able to open it, so we came to the conclusion that my drive was corrupt. I had the same information backed up on a brand new hard drive so we compared files from the each drive against the other. The files from the new drive opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw or dng files at all from anywhere so it can only be a problem with photoshop. We thought we had the problem solved but we did not. This never happened on CS4 unless i was trying to open 30 or more raw files, and even then it gave me a warning that it had no more ram, it didn't just lock up and do nothing. I'm at my wit's end. Even though there are a lot of great new things in cs5, they aren't very useful if you can't use the product to do the simplest thing.1) Install the Photoshop 12.0.1 update
2) Install the latest ACR update.
If problems continue after that, then there probably is something wrong with your system. -
My Ipod touch 5 just stopped working. The screen got black and now I can't use it or start it.
I have tried to charge it but it doens't start and when I tried to connect it with my computer it didn't work either.
I saw that you could hold down the "home" button and the "power" button at the same time but my home button doens't work so I can't do that.
Is there any other way I can fix it or do I have to go to an apple store?Try:
Turn on without Home/Power Button
Maybe you are looking for
-
Interactive Image: Text Styles?
Is there a standard text style we can edit to modify what shows up in the text boxes when an interactive image zooms in? According to the Style menu it's "Body Bullet" text, which just by looking at it you know that's not right. I don't see an "Inter
-
In Tab order, I have a comment field showing up as Master
I am fixing the tabbing order in my multi-page dynamic Livecycle Designer form. On page 3, there is a comments field (there are about 15 instances of this field on the form). It shouldn't, but it does show up as M(aster) and I cannot move it up to wh
-
View Object is invalid due to SYSTEM.MODE is not recognized inside SQL
Hi All, I tried recreating a Oracle form 9i to ADF BC using Jheadstart 10.1.3.3.81, JHS converted the form(converted .xml) generating the Entity and View Objects. But among the generated View Objects few are invalid due to which the generated .jspx p
-
Hallo Auf einigen PCs arbeiten wir noch mit Illustrator 10. Dabei generieren wir auch JPG-Dateien, um sie in Dokumente einzufügen. Neuerdings zeigt MS Windows XP diese Grafiken als leer . Was läuft da falsch? Diese Anzeige als leere JPG-Dateien behin
-
Trying to purchase a book. Get a pop up screen that says "your Apple ID has been disabled". How can I fix that