Libproxy sp12 behind a firewaill fails to connect to weblogic cluster

Two WLS 5.1 SP11 clustering, iPlanet4.1 w/wlproxy plugin, Solaris Box. There is a firewall in between the iPlanet WebServer and the weblogic cluster. The NSAPI proxy plugin ( libproxy.so )connects successfully to one of the weblogic cluster for the first time using the NAT IPs of the cluster m/c maintained in the obj.conf. The Response contains the actual IP of the weblogic cluster m/c which gets updated in the proxy and uses that to connect to the cluster and firewall blocks that as it is not the NAT IP. But this works fine in libproxy of weblogic 6.1 unfortunately this has a problem when the data that gets passed is more than 1000 chars.

shouldn't the connect string look like jdbc:oracle:thin:@MyIP:1521:MySID ?

Similar Messages

On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

I have a new install of Windows 2012.  I have two physical servers. One is a W2012 std Domain Controller ("DC"). The Second is configured as W2012 HyperV  ("HV"). Under HV I have
two VMs. One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS"). All systems are behind a firewall appliance. Exchange is working via Outlook and OWA internally and externally. The self
created SSL must be installed manually on external machines since it comes up as an untrusted certificate. Once installed remote outlook works and OWA works. I have configured the terminal server and I am able
to login remotely as various users under my "TS group". The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
for alias@ domain, then fails the logging on to the mail server) The error reads: "Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name. The
connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC. I have
tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command. I have also tried to use the guid via "Get-Mailbox
ALIAS | fl name, exchangeguid. Keep in mind all desktop users on the network are connecting to Outlook without issue.
I would appreciate any thoughts on solving this issue.

Hi,
According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
Regards,
Winnie Liang
TechNet Community Support

VPN fails to connect

Does anyone know if the VPN option works? It is under setting, wireless network, VPN settings. I have a PPTP connection that works fine from my desktop but "fails to connect to server" when tried on my phone.

Sorry to say that showing the scrreen shots does not make it work. The bottom line is the the ROM supplied by Verizon/Samsung/Google - whoever you want to blame does not support VPN connections.
Here is a log and one VPN vendors answer.
11-18 21:27:41.648 E/VpnService(7616)onError()
11-18 21:27:41.648 E/VpnService(7616)java.io.IOException: Connecting timed out
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnService.waitUntilConnectedOrTimedout(VpnService.java:206)
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnService.onConnect(VpnService.java:136)
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnServiceBinder$2.run(VpnServiceBinder.java:108)
11-18 21:27:41.648 E/VpnService(7616)at java.lang.Thread.run(Thread.java:1096)
11-18 21:27:41.728 I/VpnService(7616)disconnecting VPN...
11-18 21:27:41.793 D/VpnActor(7580)vpn disconnecting!
We think the reason behind this error is that, either your phone not support VPN or the ROM u r using have VPN problem.( from my own experience, I think it's the ROM problem)

Iphone4 fails to connect to AppleTV very often

hi..my iphone4 fails to connect to my AppleTV very often. Sometimes it gets connected without i doing anything. Sometimes even if try connecting through the i remote, it looks for the Apple TV and then says turn on Home Sharing. My Home sharing is always on. Funny thing is sometimes when i open you tube etc, it already shows the Airplay icon. Other times (When i really need it), the Air Play icon is missing....Pls help.

A Gen4 TC should not run too hot.. yes, when backing up with the disk running for extended periods then they do run pretty hot.. but once the disk spins down they should cool off..
Is the disk spinning down?? Stick your hand on it and feel... stick your ear over the fan area.. right behind the power socket and listen if the fan is running.. on a gen4 it should.
Raise the TC on pencils or chop sticks or erasers or bottle tops.. make sure it doesn't sit on the bench.
If you are running the latest firmware.. go back. In fact on a 12month old TC you might be able to go back to 7.5.2 firmware. (hold the option key when you select firmware updates, to show all possible updates and downgrades.)
The latest firmware offers nothing but trouble.. for the vast majority of people.
Do you still have AppleCare on a computer.. that will cover your TC as well. Take it back to Apple if you are worried..
There is no difference whatsoever between the two model TC except the size of the drive.

Add-On connection for Journal Entry - Failed to Connect to SBO Common

We have a customer (SAPBO 2005A SP01 PL29) with some specific requirements that required an add-on running in the background to monitor the addition of Goods Receipt PO's to the system. When the GRPO is successfully added, the Add-On will (behind the scenes) create an appropriate Journal Entry through the SAP DI. One of the issues that we encountered during the development of this functionality was that when it was tested by users, they weren't authorized to access the Financials module or the Journal Entry screen. What we ended up doing was creating a secondary connection (vCompany) in the DL pulling the information from the encrypted user information from SAP the Add-On used to connect, but utilizing a management level user ID and password. Once that connection has been made, the Journal Entry is added through the DI and that secondary connection is disconnected.
The problem that we're encountering is this. When the users are logged into SAP Client with an regular user, and the GRPO adds, the secondary connection fails and returns a message of "Failed to Connect to SBO-Common". However, if the user is logged into SAP as an adminitrative level user and the GRPO is added, the secondary connection is successful and the Journal Entry is created. The secondary connection is strictly used for the JE. Here's the code (VS.Net 2005) for the secondary connection:
vCompany = New SAPbobsCOM.Company
vCompany.UseTrusted = True
vCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
vCompany.CompanyDB = oCompany.CompanyDB
vCompany.UserName = "XXXXX"
vCompany.Password = "YYYYY"
vCompany.Server = oCompany.Server
vCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005
lRetConnect = vCompany.Connect()
Where "XXXXX" would be the appropriate management level SAP User Name and "YYYYY" would be that users password.
Has anyone else had this kind of issue where you needed a secondary connection with management level access behind the scenes to accomplish something in SAP and had problems getting it to connect? Any thoughts or ideas would be greatly appreciated.

Hi Dennis,
what you can try is to make a untrusted connection
oCompany.UseTrusted = False
and set the DBUser and Pwd
oCompany.DbUserName = "sa"
oCompany.DbPassword = "insertpwd"
lg David

EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instanc

HI Experts,
Today i got this alert from oem grid during RMAN bakcup of the PROD database.when i try to connect the database i am able to get into to the DB successfully with out any issues.
But i am not sure why this error has come and resone behind that.Please advise.
From: Oracle OEM [mailto:[email protected]]
Sent: Tuesday, February 22, 2011 11:21 PM
To: DBA_GROUP
Subject: EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Target Name=PROD.test.edu.au
Target type=Database Instance
Host=delhi.win.test.edu.au
Occurred At=Feb 22, 2011 11:20:33 PM EST
Message=Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Severity=Critical
Acknowledged=No
Notification Rule Name=Database Availability and Critical States
Notification Rule Owner=SYSMAN
when i check the alertlog file i could see the following
Tue Feb 22 23:01:36 2011
Starting control autobackup
Control autobackup written to DISK device
handle '/oracledb/rman_backup/PROD/control_c-197342269-20110222-01'
Tue Feb 22 23:22:42 2011
Errors in file /oracle/admin/PROD/udump/hubprd_ora_27069.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
PLease let me know the cause of the issues and solution to overcome this issues.
Regards,
Salai

It would appear that your archive location is full. If it is full, then try to get some more free space there by either deleting the old archives or specifying a different location.
I don't see any mention of a flash recovery area in the log message, but you may also want to confirm that you have reached your space allocated to the FRA.

In App Purchase Error, ( Transaction Failed Cannot connect to iTunes Store)

O.k. on my iPhone when I'm in an app I tried to purchase something and it won't let me by saying, Transaction Failed, Cannot Connect to iTunes Store.. But I'm able to use the same app on my iPod touch and I can purchase what I needed.... So can somebody help me figure out what the reason is behind it? Both the iPhone and the Ipod has the same account information and both uses the same computer to connect to iTunes.... So why does one work and the other doesn't? Also its an iPhone 3Gs...

Although you may be using the same iTunes Account, things can get a little strange if you have different AppleID's for each device. On your device, check settings ==> Store. The AppleID for that device is listed there. It can be confusing because syncing to the same iTunes account is not the same as managing App and purchases through the iTunes Store Account.
On your iTunes window the uppe right corner shows which AppleStore ID is logged in. If it turns out they are different, simply log out of the store on iTunes, and log in with the other account. Download the updates. Log out and then back in to the other account.
As an alternative, download the updates on the device they were purchased. Sync to iTunes, and the updated download be transferred back to iTunes and available to the other devices syncing with iTunes.
Or....... if your iPhone is Airplane Mode, turn that Airplane mode off and ignore everything from above.

REP-56110: Failed to connect to security repository Oracle Portal.

Dear All,
I need your help on the error REP-56110: Failed to connect to security repository Oracle Portal.
I have installed Oracle Application Server 10g R2.
I have enabled SSO for form Sevice and Report Service.
I created OID user login and map it to my database user (on which my Application Run).
When i run my application, SSO page apear. I login it with user id and Password and My application Runing Succesfully. But when i call Reports from my Application through Run_Repor_Object or Web.Show document. I get the error REP-56110: Failed to connect to security repository Oracle Portal.
my oid user id and passwor is as follow
username = ssotest
password = ssotest1
IF i run rwservlet command. It is showing the Server page with Secure mode.
http://server:7778/reports/rwservlet/showjobs?
What is the reasong behind this? Help me out.
http://server/reports/rwservlet?destype=cache&desformat=pdf&report=sr_master.rdf&FromDate='01-JAN-12'&ToDate='31-DEC-12'&SSOConn=test/OracleDB/ssotest
where -- test is my Resoruce Name define in OID
oracleDB Resource Type
ssotest my sso user name
Edited by: Meherban Khan on Mar 27, 2012 6:21 AM

I changed %PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%
with the actual username/password of the portal schema. Now i get the following Error.
REP-56071: Security check failed with error message: Error code30004 - Cannot access the output type:cache
In package:wwv_rw_usr function:security_check
Command line is: server=rep_portal_form_report_services report=KPIx/Churn Analysis/ChurnByAgeGroup.jsp destype=cache desformat=html rundate="27-DEC-05 12:12:20"
Executed on:12/27/05 12:12:29

Failed to connect Error - Need Help, Please

I installed , created the simple "Hello" program and it ran fine on the simulator.
Then, I click the run OTA and now I'm in deep yogurt!
I get the message:
*** Error ***
Failed to connect to device 0!
Reason:
Emulator 0 terminated while waiting for it to register!
BUILD SUCCESSFUL (total time: 4 seconds)
I just want to restore things to what they were before I selected Run OTA. I've been reading for the past 3 hours and haven't found out to restore. I even deleted and re-installed but, still get the same meassge (probably some saved java pref file...). Anyway, HOW TO RESTORE to a virgin setup????
Thanks

... I read somewhere I need to reboot - I did and it took care of it.

Remote app on ipod fails to connect to itunes 10

After upgrading to iTunes 10, my remote app on the ipod touch 4G fails to connect. I've reauthorized, which times out most times, but eventually when it works, it only continues to connect to iTunes until I close and restart the program. I've disabled all firewalls and still have the issue. iTunes 10/iPod Touch 4G/iOS 4.1/ancient remote.app do not play well together.
Anyone else unable to get the remote app working reliably with this combination?

Hello all,
I would like to get more details from people who are still having trouble getting Remote 2.0.1 to connect. If you are unable to connect, please email me <[email protected]> with the following information:
- A detailed description of the specific issue you are seeing.
- What OS is on the host computer? (the one with iTunes on it)
- What OS is on the affected iOS device(s)?
- A description of your network topology. Please be as detailed as you can, including hardware and firmware versions, if possible. Also please explain how everything is connected.
- Is the base station running default settings, or do you have any non-standard settings enabled? If so, please elaborate.
- Do you have the built-in firewall enabled on the host computer?
- Do you have any other firewall or Internet protection (anti-virus, etc) installed on the host computer?
- Were you able to connect with versions of Remote prior to 2.0?
- If you have multiple computers, can you get Remote to connect to any of them?
- Does Home Sharing work between computers on your network?
- Do you see any messages in Console (in Applications/Utilities) on the host computer that seem to coincide with the connection failures?
Thanks,
Roy
<[email protected]>

My iphone 5 won't make a call when i fail to connect to the internet via 3g

My iphone 5 won't call when i fail to connect to the internet via 3g.
At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
(note: when the 3g connection does work, the phone has absolutely no problem calling people)
Anyone had this problem?
Even better has anyone got a solution?
Thanks,
Nick.

Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?

My new i phone 5 wont sync with my laptop, keeps saying failed to connect to sync services. any help?

I just purchased a new i phone 5. when i go to connect with my laptop it says 'failed to connect to sync services, try again later' it shows my phone, and i can see my app screens, however it wont let me sync, back up or make changes. this is my first apple product, any help would be greatly appreciated.

Hello there, load dogg.
The following Knowledge Base article provides some in-depth steps to help troubleshoot the issue you are descibing:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Thanks for reaching out to Apple Support Communities for answers to your question.
Cheers,
Pedro D.

OBIEE 11g agents are failed to connect to Essbase

OBIEE 11g agents are failed to connect to Essbase. We are using :USER & :PASSWORD (SSO) in connection pool setting to connect to Essbase.
User account exists in both OBIEE and Essbase. OBIEE dashboards which are based on Essbase are working fine. Essbase variables in RPD are upto date.
Only agents are failing and error says invalid credentials, but dashboard pages are running without any issue.
OBIEE: 11.1.1.5 (BP4)
Essbase: 11.1.2.1
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Login fails due to invalid login credentials (HY000)
Essbase and OBIEE services are up and running.
Any help will be appreciated.

We finally implemented CSS Token option and ended up with this error. We are unable to connect to essbase with CSS Token option.
We followed the Oracle document to implement this.
[nQSError: 43119] Query Failed: EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials. (HY000)
We did update this property:
JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} -Didstore.identityAttribute=objectguid"
Any help will be appreciated!

Fingerprint reader not working in IE and saying failed to connect to sensor

Hi all,
I bought a Qosmio x500 10t a couple of months back. For the first couple of weeks i had no probs using the fingerprint reader to log in to windows and to log in to websites in Internet exploer.
All of a sudden it would not work on any website stored. The green banner showed accross the top of site and asked to swipe finger but nothing happened when I swiped. I rebooted and it worked again but not for long before failing. This time a reboot didnt work so i deleted my finger prints and websites and started from scratch. That worked for a couple of attempts before probs started again. And on trying to get into Fingerprint utility it says failure to connect to sensor. So, I did a system restore. It worked for a couple of times again and then same probs. So I found the updated utility software, uninstalled the old and put on the new. Same again, worked for a couple of times then failed.
I could not find anything stuck in the registry but to be on the safe side i did a full system clean back to factory setup using backup discs. Hey presto i thought it had worked. Everything going ok for first 24hrs and then same problems start to occur. Only this time it is also prompting me to enroll fingerprints even though i already have. And when i try to get into the utilioty it says failed to read sensor again.
The fingerprint log on to windows always works as long as i dont close the fingerprint utility down before shutting down. If i do exit the utilty i cant reopen it as it just says failed to connect to sensor. And then i have to unistall and reinstall the utility software. Aty the moment it occasionally works on websites stored but most of the time it doesnt do anything.
Please help. Do I need to send laptop back to Toshiba??

Hi,
*I got a solution* for the problem that the fingerprint sensor "suddenly" does not work any more.
When starting the Toshiba Fingerprint Utility, it says "failed to connect to fingerprint sensor".
Is it possible that just before it stopped working there was a new firewall installed, or firewall settings had been changed?
*In my case, the problem was solved by changing my firewall settings* (Windows 7 Firewall Control) to ALLOW all traffic for
the Authentec Fingerprint Sensor Service (AFSS). It is the file "AtService.exe" in C:\Program files
The reason is simple:
The Toshiba Fingerprint utility communicates with the fingerprint sensor service via TCP/IP.
Therefore, any firewall that blocks traffic on the local computer will block the communication.
*After changing my firewall settings, fingerprint sensor works* on my R700 flawlessly now.

Error while connecting to an OData Feed from Excel 2013 PowerPivot . Error: Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported

I am trying to connect to a Odata Data feed from Excel 2013 Power Pivot
The datasource is in sharepoint site eg: https://sitename/Shared%20Documents/datafeed.atomsvc
getting below error
Error message:
Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported.
============================
Call Stack:
============================
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.ValidatePayloadKind(ODataPayloadKind payloadKind, ODataMessageReader odataMessageReader)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.InterceptODataException(Action action)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader..ctor(IODataResponseMessage responseMessage, Int64 maxReceivedMessageSize)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.CreateReader(IWebResponse webResponse, Int64 maxReceivedMessageSize, Boolean applySlashUpdatingBaseUriResolver)
   at Microsoft.Data.DataFeedClient.ODataHelper.GetCollectionsFromServiceDocumentUrl(Uri serviceDocumentUrl, DataFeedConnection connection)
   at Microsoft.Data.DataFeedClient.DataFeedConnection.Open()
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
   at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
Appreciate suggestions/answers
NOTE: The error is showing only while using Excel 2013 powerpivot
its working good with Excel 2010 powerpivot

Anita,
Please look into using Power Query to use OData as a source in Power Pivot.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Libproxy sp12 behind a firewaill fails to connect to weblogic cluster

Similar Messages

Maybe you are looking for