Library Tables in Report Painter ?

Hello,
can we use two tables while creating a library for the report painter ? mmy guess is on using a view ??
If views, then how to use them in the libray while defining the characteristics n all ??
Hope i am comprehendable ..
Thanks.
Shehryar

Hi ,
i seen the same issue in sapgenie.com , just have a look .
as per my knowledge u can use Views in report painter.
regards
Prabhu

Similar Messages

GRCT HOW TO ADD Z TABLES IN REPORT PAINTER

Hi Gurus
Could you please send me information about how to activate z tables in report painter ? someone said me that i can user transaction GRCT to do that...¿ what aspects must I consider to add a table ?
mail: [email protected]
Regards
Andrés Moreno

hi Andres,
below are the steps for the Report Painter.....
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Overscore checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01 (Plan)
Version 0 (Actuals)
Valuation 0 (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
Assign the points....
Ranjit

Joining the tables in report painter/writer

Friends,
Can we join tables in report painter / writer?
Regards
HK

Hello
table joining required if you want a report wherein you need field from more than one table with interlinked field. Then create infoset in SQ02 and use that infoset and create Query in SQ01 and design as per requirement. Abap coding also possible here
Report writer/pointer you can refer table for any feld requirement, no need to join thats only viewing
hope I answer u properly
Regards
Dinabandhu

Attachin Custom Table to Report Painter Library

Hi,
Im trying to create a new library in Report Painter (GR21) and attach it to a custom table.
I am getting the error message (GR493) that "the table is not installed in Report Writer - The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables"
Does anyone know what this means and how to get around it?
Thanks.

Hi,
You need to add the table as a report table in transaction GRCT "Report writer control tables".
Hope it helps!
Regards Rene

Create a library which joins 2 tables that report painter can use.

Hi,
Please help in resolving following issue:
Create a new library that joins these tables (in client system) GLPCT and ZFKHALIX that report painter could use. If we had this then we can create a P&L report that properly breaks out COGS and SGA in the same way as ou khalix feed.It would also save a lot of time in month end reconciliation between two tables.
ZFKHALIX: SAP->Khalix Interface --- Custom Mapping Table (Developned)
GLPCT : EC-PCA: Totals Table (Standard Table)
Regards

Library can be created only with reference to a single table as in GR21. If you are looking for joins of tables, ABAP Query may be the answer. There, you have the infoset where you can join two or more tables. And based on the infoset you create queries.

Change Table in Report Painter

Hi Experts,
I have some Report Painter reports assigned to a Library. I would like to change the table. Is there a a way to change the table without re-writing the reports? I can add a new table, but do not know how to remove the existing table without affecting the report. Does any one have an idea? Please advice.
Thanks
Kingsley

Hi,
I would like to change the assignment of the form.
Yet it is assigned to a standard report and I would like to assign it to a report I have created.
Ronan

BSEG table in Report painter

Hi All,
I want to create a report using a report painter. For this while creating library, i want to use the table BSEG.
But i am getting an error message "Table BSEG is not installed in report painter".
Then i used transaction MC27 and created Z structure from table BSEG. This solved my problem.
All this i was doing in ECC6.0 version.
Then i tried in 4.7 version, there table BSEG was already available to create a library.
Is it a version difference or we can can directly map standard tables also using transaction MC27 ?
But in ECC6.0, it was not allowing me map table BSEG using transaction MC27. I was getting message that "Evaluation structure name must be started with ZF"!!
Please help me in solving this puzzle!
Thanks
Puneet Aggarwal

Hi
This is version difference. In 4.7 Table BSEG not updated. In ECC 6 this problem solved.
Shammi
assign points if it is helpful

FI table for Report painter

Which table I will take to create FI report in Report Painter ?
Please help me..
Thanks & Regards,
Ananda

Hi,
If you are in ECC environment use Table FAGLFLEXT is suitable to create Library & Report Group & Report by using report painter.
if you are in ECC but not actvation new GL / you are in up to 4.7 then use table GLT0
regards
Viswa

Can we combine the two tables for Report Painter

Hi,
For making the report in Report Painter, I am not getting all the required characteristics and Key figures all in one table / Library.
The required ones are in Table KKBC, GLT0 and CCSS.
Is it possible to combine these tables and make a new one so that I can create the Library and can use that Library while making the report in Report Painter.
Or is there any other work around to get the my required charcateristics and Key Figures so that I can make the report easily?
I dont want to go through ABAP route.
Kindly help.
Regards
Kami

Thanks Bulut for your reply,
But by going through View creation involves ABAP help, that I dont want.
However, is it poosible to use View while creating the reports in Report Painter? I am not sure.
I want to know whether can we create a table which is used for report painter, so that I can use for creating the Library and then the reports.
I hope you understand my point.
Regards
Kami

New table in Report painter

Dear All,
Can some one guide me as to how to include the new table FAGLFLEXT in the report painter reports.
Thanks and Regards,
Gokul.

Hi,
use KE5B to make the FSV nodes available in Report painter reports. This function can be used to create/change sets based on FSV.
Best regards, Christian

Adding ztotals table in report painter for transaction FGI3 in report type

Hello All,
I have zprograms in report painter for trasaction FGI3. For my reports i have to add Ztables..In the transaction FGI3 there is report type 020. Here they maintain the Zreports.
Can you hellp me out in adding the totals table.
Thanks

Hi,
Transaction FSi2 takes you there.
Alex-

DB Table for Report Painter

Hi all,
Can anybody please let me know in which db table the details of the Report Painter are stored?
If I have a Transaction Code, I want to know if that transaction code is created for Report Painter or not through program not through SE93.
I have to create a report on all Z Transaction Codes.
Thanks in advance.

Hi Mr.A ,
while creating tcode for report painters we will take option PARAMETER Transaction code , so based on the transaction type u can find out from the same tables - TSTCP or TSTC.
regards
Prabhu

Table need to be added in report painter library

HI,
Can't we add any table in report painter library (GR21) like if i add s032 it is accepted by library while 'MARD' is not accepted it gives error Table MARD is not installed in Report Writer.
what is the difference between s032 and MARD table, as both are transparent table. but one is accepted and other is not.
Thanks

Hi
You can't use all tables.see the below lines for it:
Both Report Painter and Report Writer can be used to report on the following tables and tables types:
 Evaluation structures set up in the Logistics Information System (LIS). These structures normally begin with an S or ZF. Several different tables and views within the R/3 System can be added as evaluation structures.
Note: You cannot add cluster tables, such as BSEG.
CCSS is used for Cost Center Accounting (CO-CCA), Internal Orders (CO-OPA), Activity Based Costing (CO-ABC) and for cost element reports in Project Systems (PS).
GLFUNCT is used for functional area reporting in cost-of-sales accounting.
GLPCT and GLPCOP are used for Profit Center Accounting (CO-PCA/EC-PCA).
FILC is used for Legal Consolidations (FI-LC).
COFIT is used for the Controlling Reconciliation Ledger (CO-CEL).
ZZ tables are created for the Special Purpose Ledger (FI-SL).
FIMC is used for consolidations in the Enterprise Controlling module (EC-LC).
GLT0 is used for Financial Accounting (General Ledger) reports by account, company, and business area (FI-GL).
KKBC, KKBE, and KKBU are used for the Controlling Product Costing module (CO-Costing).
reward points if useful
regards
Anji

Creation of Library and Report in Report Painter with Z tables.

HI,
When I am creating library in report painter with Z table it is giving the following error message 'Table ZCO_SEMI_FIN_VAL is not installed in Report Writer'.
Can u help me how u install Z table in report painter and create the characteristic and key figure of the Z table in the library.
Regards,
Partha B

Hi Partha Pratim Bhar,
In order to bring / enable a Z table for you to build a library, you will have to set it at transaction GRCT.
Here you need to configure - table (Z table) , characteristics and Key figures.
You can refer any other tables by SAP in GRCT for reference.
Revert if you require additional help.
Regards,
Subin John

Report painter Tables

Hi,
   I am working on Report painter. Production order based reports (Ex: T.Code : kko4 and T.Code: kko0). I want to add some more fields in to the table. Can any body guide me how to locate the relevant table and libraries .
   Aftter adding the new fields how to get the reports.
Thanks
Dasa

Dear Dasa,
Tables:
CEFORMT                        Table for Report Painter Row and Column Texts
CESETS                         Set Administration in the Report Painter
REPPSCRN                       CO-OM Reporting: Screens for User Settings Maintenance
TKEP7 Characteristic group
Hope this will help.
Regards,
Naveen.

Library Tables in Report Painter ?

Similar Messages

Maybe you are looking for