Library update went flawlessly, but working inside AP3 is a pain. Ideas?
Dear all,
I don't have the intention of re-posting the problems several people already have described in these forums, but I feel my problem with Aperture 3 is different than the ones I have read about:
Firstly, I imported and updated my AP2 library, and all went well. I then imported my entire iPhoto library, and this also worked flawlessly. Faces and everything turned on, all the processing was finished overnight. 25000 photos, ~90gigs.
However, when I now try to work in Aperture 3, everything takes a LOT of time, and generally renders the app useless. Moving photos around, making adjustments, using Faces - it's all in turtle's pace.
I have done the consistency check, repaired and rebuilt the library, but it is still very, very slow. Everything is working per se, it's just that it's so slow...
Do anyone have any ideas what I can do to make it snappier?
I know my system is not the most up-to-date, but AP2 ran a lot faster than AP3 has ever done until now.
Would greatly appreciate answers
I had the same problem after upgrading my library.
Turns out the problem was with aperture 3 accessing the previews/thumbnails. To fix the problem I had to Force rebuild all the thumbnails by highlighting affected thumbnails and choosing "Photos->Generate thumbnails".
For my aperture 2 books, I had to force a rebuild of the previews doing the same thing.
I also trashed my aperture preferences file in /users/Home folder/Library/Preferences/com.appple.aperture.plist. and reset my preferences in aperture 3.
Once I did those steps, my library loads like a banshee!
Similar Messages
-
I recently updated my iPhone. My update went great, but after updating my wifes, all her pictures and videos were missing. Is there a way to retrieve them?
Was a backup done prior to the update? If so, restore the backup.
As designed, the Camera Roll on the iPhone is temporary storage. Copy the pictures/videos off to the computer the device normally syncs with then sync the desired pics/vids back to the device via iTunes. -
Error Message "iPod can not be updated.." but works after clicking away msg
Hi!
I have installed an German iTunes 6.0.4.2. and the newes IPod Software under WinXP.
After clicking " iPod Aktualisieren" I get the following message:
Der iPod "xxx" kann nicht aktualisiert werden. Ein unbekannter Fehler ist aufgetreten (-39).
Transl:
The iPod "xxx" cannot be updated. An unknwon Error has occured (-39).
After clicking away the messagebox everything sync's fine.
Whats wrong here? I have the problem for a week or so and already updated iTunes and the iPod software so far. And reset the iPod back to delivery conditions with the update tool. Nothing worked.
kind regards
marcusI did a search on Google for Error -39, and it suggests 2 things. Installing the latest version (which is sounds like you have) and turning OFF web accelerators if there are any running...
http://docs.info.apple.com/article.html?artnum=44000 -
Ipod won't update new software but works fine
itunes has latest update trying to update my ipod but says that it has timed out every single time. Tried to restore it, and tells me the samething
You need to get someone to help you turn off or temporiarly disable the anit-virus software (Norton, McAfee, AVG, Avast, Kaspersky, or what ever).
-
Some sites, IRS partcularly, show a form but do not update in Firefox but work with IE any fix?
When trying to use Firefox to complete lessons on the IRS Practice Lab site, numbers entered on the screen do not update the server application. IE works so it appears that the site is not accepting data from the Firefox screen. Is there a way to ensure that Firefox is compatible with sites that seem to be designed only for IE?
It is not a pdf. The initial page is https://www.linklearncertification.com/d/. On the right side of the page is a "Practice Lab" link. At this moment it seems to being maintained so is not accessible at all. It should be back up by Monday.
The problem is that when entries are made on a page they do not actually update the database. The screen "blinks" like something is happening but the return is unchanged.
I have IE but people using an Apple and Firefox cannot use the site with firefox. -
Early Imac 20" freezes on regular mode but works fine in safe mode, any ideas?
Have a early 2006 Imac 20" that won't run in normal mode; freezes within minutes. Run fine in safe mode, but safe mode won't play sound or allow exterior inputs. In high fan state, don't know the name of the mode, but you hold the power button while plugging in power cord, the machine also runs relatively fine. The machines been glitzy for years, developed the lines/colour patterns that's been mentioned in other forms/threads, but it still ran programs. Took it to apple and they said the board is the issue and my machine is obsolete. Fine, I just want to understand why it will run perfectly in safe mode; no lines, no freezing, all programs running...but won't last minutes in regular mode. Also, if anyone has a way to play music...in bluetooth or appletv in safe mode, let me know.
Thanks.Most of thee skinny on that...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I had original iPhoto app from 2007 or 2008, but in the last year it stopped working seemingly out of nowhere. Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater. My pictures are lost in the abyss.
I'm using OS Extended 10.9.5. I don't know what the original version of iPhoto was.I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater
Have you run the iPhoto Library Upgrader? You need to direct it to the location of your old iPhoto Library by clicking the "Choose Library" button in the lower right corner of the panel you are seeing when the upgrade starts. -
I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!
Hello 74birdy
The article below will assist with troubleshooting your iPhone not responding.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Writing to file is flawless -- reading works but returns nothing.
This was a homework assignment for my 2nd Java course, and I'm not posting here for the easy way out I DO want to learn this, I'm just stuck.
Program simply -- Create/write a file with a vector inside of it, which contains an object. Allow the user to insert as many objects as they want into the vector. Once the file is created, display the contents.
Simple enough, I managed to create what I thought would work flawlessly, but when I try to read the contents of the file, the program exits code 0, without displaying the object variables I asked of it. Here is the attached code (I've left out the Person class simply to save space, but it it contained two variables (name and yob), as well as proper setters and getters):
public class homework1 {
static Scanner keyb = new Scanner(System.in);
public static void main(String[] args) {
Person x = new Person();
//I prefer flagging here
Vector<Person> allPersons = new Vector<Person>();
int flag = 1;
System.out.println("Please type 'add' to add a Person to the list.");
System.out.println("Please type 'view' to view the current list.");
String s = keyb.next();
if (s.equalsIgnoreCase("add")) {
System.out.println();
while (flag == 1) {
System.out.print("Enter person's name: ");
String u = keyb.next();
x.setName(u);
System.out.print("Enter person's year of birth: ");
int t = keyb.nextInt();
x.setYob(t);
allPersons.addElement(x);
try {
FileOutputStream f =
new FileOutputStream("C:/Documents and Settings/Constantine/Desktop/test.dat");
ObjectOutputStream b = new ObjectOutputStream(f);
b.writeObject(allPersons);
f.close();
} catch (IOException e) {
e.toString();
System.out.print("Add another student? (y/n): ");
String v = keyb.next();
if (v.equalsIgnoreCase("y")) {
System.out.print("Enter new student details");
System.out.println();
} else {
System.out.println("Finished updating student list.");
flag--;
if (s.equalsIgnoreCase("view")) {
System.out.println();
try {
FileInputStream f =
new FileInputStream("C:/Documents and Settings/Constantine/Desktop/test.dat");
ObjectInputStream b = new ObjectInputStream(f);
try{
allPersons = (Vector<Person>)b.readObject();
for(int i=0; i<allPersons.size(); i++) {
System.out.print(allPersons.get(i).getName());
System.out.print(allPersons.get(i).getYob());
} catch (ClassNotFoundException e) {
e.toString();}
f.close();
} catch (IOException e) {
e.toString();
}If someone can point my in the right direction as to why my vector's object's variables aren't being displayed I'd appreciate it!
/cheersOK, I added the printStackTrace() and got this returned, maybe it will mean more to you than I can understand haha
java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: Person
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1309)
at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1634)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at homework1.main(homework1.java:107)
Caused by: java.io.NotSerializableException: Person
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1081)
at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1251)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1075)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:391)
at java.util.Vector.writeObject(Vector.java:1018)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:917)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1339)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at homework1.main(homework1.java:68) -
Flex mobile 4.6 app works inside flash builder but not in android emulator
Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:ns1="*"
xmlns:local="*"
creationComplete="windowedapplication1_creationCompleteHandler(event) "
actionBarVisible="true" tabBarVisible="true">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected var requestTokenUrl:String = "https://www.google.com";
protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
var loader:URLLoader = new URLLoader();
loader.addEventListener(ErrorEvent.ERROR, onError);
loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
loader.load(urlRequest);
protected function requestTokenHandler(event:Event):void
protected function httpResponse(event:HTTPStatusEvent):void
label.text += event.status;
// TODO Auto-generated method stub
private function completeHandler(event:Event):void {
label.text += event.toString();
trace("completeHandler data: " + event.currentTarget.data);
private function openHandler(event:Event):void {
label.text += event.toString();
trace("openHandler: " + event);
private function onError(event:ErrorEvent):void {
label.text += event.toString();
trace("onError: " + event.type);
private function onAsyncError(event:AsyncErrorEvent):void {
label.text += event.toString();
trace("onAsyncError: " + event);
private function onNetStatus(event:NetStatusEvent):void {
label.text += event.toString();
trace("onNetStatus: " + event);
private function progressHandler(event:ProgressEvent):void {
label.text += event.toString();
trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
private function securityErrorHandler(event:SecurityErrorEvent):void {
label.text += event.toString();
trace("securityErrorHandler: " + event);
private function httpStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
//label.text += event.responseHeaders.toString();
trace("httpStatusHandler: " + event);
private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
trace("httpStatusHandler: " + event);
private function ioErrorHandler(event:IOErrorEvent):void {
label.text += event.toString();
label.text += event.text;
trace("ioErrorHandler: " + event);
]]>
</fx:Script>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View> -
Has anyone had problems with your iphone working outside of the house, but not inside? Cannot make or receive calls, nor can I send or receive any text messages. This is something that just happened out of nowhere. Can I get some help please?
Did you used to have service and now suddenly you don't?
This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
I would call AT&T and explain the issue you are having and see if they can fix it.
If you never had service there then like wjosten said it's probably just a bad zone.
Hope you get it sussed out.
-PM -
After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?
Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
- com.apple.logic.pro.cs
- com.apple.logic.pro.LSSharedFileList.plist
- com.apple.logic.pro.LSSharedFileList.plist.lockfile
- com.apple.logic.pro.plist
- com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened. -
Itunes won't load CDs automatically and I have to restart it everytime to load 1 CD. I have ensured I have latest Itunes, latest DVD driver, start itunes from program library in safe mode but nothing works. Any ideas ?
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
I want to update to LION,on my Macbook Pro CORE 2 DUO, (october 2006) because Adobe CC needs at least that. I know my computer is old, but works perfect to me and I do not want to stay in Adobe CS6 since I have access to Adobe Cloud CC. Please help.
I probably dont want to go to Mountain Lion either because I've heard that it will slow down my computer, So, Lion 10.7 will be the perfect OS X for me.
I have ne newest release of Snow Leopard installed and works great.
Thank you ALL for your help.you will be ok updating to the new software but there will be some trade off. i have 3 macbooks 2006 that are all running the latest versions.
some of the trade off are
1-2 less of battery life
slow wake ups from sleep
slower start up time about 30-40 seconds longer then what you have now
the operating system will use high % of your processer while idealing
these are not the things you want to hear about a new os compared to the old one but this is how it is even with a new macbook pro. but it's not the end of the world. just make sure you have at least more then 2GB of ram and have a good harddrive and you will be ok. -
I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex
Maybe you are looking for
-
How do i delete all my data from the ipad 4 from my PC?
I know what my password should be but when I made it I guess I put it in wrong. so basically, I don't know my password. I tried putting it in but now everything is disabled and it says "connect to itunes" . now I just want to restore it but everytim
-
Can i use multiple computers to sync my Iphone with itunes?
Can I use a different computer to sync my Iphone with itunes since my laptop crashed?
-
[Bug?] In Range and Coerce Comparison Mode
It seems that changing the Comparison Mode of the IR&C function with Arrays or Clusters attached does not trigger Type Propagation, or whatever is responsible for selecting the proper instance. For example, if I wire up three arrays to the inputs of
-
Intermittent 'Unable to read file' error when exporting/opening .html to .xls
Hi, hope someone can help. I have an issue where I export a report from the Salesform platform to Excel. The file that is being exported is in html format and the report does not include any Pivot tables. The 'Unable to read file' error occurs interm
-
Hello, I am new to Oracle Enterprise Manager plugin development. I was wondering if anyone knows how to add cacao_rmi.jar to Oracle Enterprise Manager so that the serviceURL: service:jmx:cacao-rmi://10.134.175.105:11164;trustserver=true;wellknown=fal