Licecache table missing Table MATRIXINDE does not exist in the database wit
Hello,
We recently done a system copy of our APO system, everything went well. in case of Livecache there are 2 problem
1) when we do the integration for LCA/LDA/LCA while we mentione the Livecache server it is not taking the host name , it is only picking the IP address of the livecache server. If we tried host name, it times out.
2) once we give the IP address as livecache server we can start the live cache server. Bure there is only two tables in it
when we run
transaction Livecache Check (/SAPAPO/OM03) we get the erro i.e.Table MATRIXINDE does not exist in the database with ID LCA
runtime error DBIF_RSQL_TABLE_UNKNOWN
When we look into the tables there are only 2 tables in it
AAPSYSNAME
LCA_WARNINGS
when I compare with other system...it is missing a lots of other tables..
We did re-initialized the livecache.
Appreciate your help in this
Hello Sudhir,
1) Did you create the SAP ticket where this issue is reported?
2) It's good to know more details about the APO version, liveCache/LCA versions on your
source & target systems.
What note or document did you follow to do a system copy of our APO system?
3) Please pay attention to the recommendations in the SAP notes:::
877203 Post steps after the Homogenous liveCache copy usi u2026
886103 System Landscape Copy for SAP SCM
Thank you and best regards, Natalia Khlopina
Similar Messages
-
Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
ABAP Program SAPLCLVF
Application Component CA-CL-CL
Date and Time 11.06.2014 12:08:28
Short text
A table is unknown or does not exist.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLVF" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104 if dupl = kreuz.
105 insert auspc_v2 client specified from table auspcv2
106 accepting duplicate keys.
107 else.
108 insert auspc_v2 client specified from table auspcv2.
109 if syst-subrc ne 0.
110 message a585 with tabausp.
111 endif.
112 endif.
113 refresh auspcv2.
114 endif.
115 read table auspcv3 index 1.
116 if syst-subrc = 0.
117 if dupl = kreuz.
118 insert auspc_v3 client specified from table auspcv3
119 accepting duplicate keys.
120 else.
121 insert auspc_v3 client specified from table auspcv3.
122 if syst-subrc ne 0.
123 message a585 with tabausp.
124 endif.
125 endif.
126 refresh auspcv3.
127 endif.
128 read table auspnv1 index 1.
129 if syst-subrc = 0.
130 if dupl = kreuz.
131 insert auspn_v1 client specified from table auspnv1
132 accepting duplicate keys.
133 else.
>>>>> insert auspn_v1 client specified from table auspnv1.
135 if syst-subrc ne 0.
136 message a585 with tabausp.
137 endif.
138 endif.
139 refresh auspnv1.
140 endif.
141 read table auspnv2 index 1.
142 if syst-subrc = 0.
143 if dupl = kreuz.
144 insert auspn_v2 client specified from table auspnv2
145 accepting duplicate keys.
146 else.
147 insert auspn_v2 client specified from table auspnv2.
148 if syst-subrc ne 0.
149 message a585 with tabausp.
150 endif.
151 endif.
152 refresh auspnv2.
153 endif.Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano -
Table /xyz/abc does not exist in the database
Hi experienced developers,
I created two transparent tables in customer name space in development system, transport to quality together with program using the tables, everything fine, no errors, no warnings.
Then transported to production. No errors, no warnings. Detailed protocol shows tables have been activated, no errors or warnings.
First try to use the program gives a dump.
line 1191:
""/xyz/abc" is not defined in the ABAP Dictionary as a table, p"
"rojection view, or database view."
Double-click on the table in program code gives a popup information message
Table/xyz/abc does not exist in the
database
After acknowleding the popup, the usual dictionary entry is shown, table is active. Utilities -> database object -> Display leads to an empty screen
Fields of /xyz/abc
Fld name Position Data Type Length Decimals Not null Default
Indexes for /xyz/abcI
Utilities -> runtime object -> Display shows the table name followed by message
There is no active runtime object for ...
prededed by big icon exclamation mark.
We created a new transport with exactly the same result.
Basis people have no idea.
The only thing special (but OK I think) is that the tables have key fields only.
Database is Oracle 11.2.0.2.0, SAP ECC 6.0
SAP_ABA 701 0008 SAPKA70108 Cross-Application Component
SAP_BASIS 701 0008 SAPKB70108 SAP Basis Component
PI_BASIS 701 0008 SAPK-70108INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0005 SAPKITLRD5 SAP Solution Tools Plug-In
SAP_BS_FND 701 0009 SAPK-70109INSAPBSFND SAP Business Suite Foundation
SAP_BW 701 0008 SAPKW70108 SAP Business Warehouse
SAP_AP 700 0022 SAPKNA7022 SAP Application Platform
WEBCUIF 700 0009 SAPK-70009INWEBCUIF SAP WEBCUIF 700
Yes I know, this is a DDIC forum question but I hope for more (experienced) readers here.
Thank you all for any hint leading to a solution.
Best regards
Clemens LiHi,
thank you for the comments although it does not help.
Here is the excerpt from productive system import protocol (original table names replaced as customer requirement)
*** Activate objects at level 1
Too low cost (2.100) for parallel processing. Minimum: 6.000
* Synchronous execution, no parallel processing *
Activate table /xyz/abcd1
Table /xyz/abcd1 was activated successfully
Activate table /xyz/abcd2
Table /xyz/abcd2 was activated successfully
Synchronous processing: 4 sec., 2 objects, 2.100 costs
Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2
Objects not activated........................: 0
Activated objects with errors in dependencies: 0
Objects activated with warning...............: 0
Successfully activated objects...............: 2
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
Statistics on Activated and Deleted Objects
End phase 002 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: ENNIPROD_10
Return code..............: 0
Phase 001..................: 00:00:04 (Object Activation)
Phase 002..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:05
Date, time...............: 08.03.2012, 16:30:43
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20120308163043
Ended with return code: ===> 0 <===
Actually, I don' understand it.
Regards,
Clemens -
Table ZCHECKPICK does not exist in the database
Hi!
I have a table "ZCHECKPICK" no "MANDT - Client".
Then I inserted a field "MANDT - Client" and executed SE14 to "Active and adjust database".
The table is now "does not exist in the database" but the struture is ok.
What do i do to get the table in DataBase again?
<Priority normalized in subject line>
Edited by: Vinod Kumar on Sep 13, 2011 9:32 AMDear Clayton,
you can try a few things
1) generate/activate the table prior to call SE14.
2) after confirming that the table is well generated, go to SE14 and choose "Delete Database Table"
3) then, still on SE14, click on "Activate and Adjust database"
[http://imageshack.us/photo/my-images/607/20110913010743.jpg/]
That should fix it.
Kind Regards
/Ricardo Quintas -
Table Z does not exist in the database
Hi,
I have created a Z table and modified the DataType from NUMC to DEC and transported to Quality server
and it is giving an information error that (Table Z does not exist in the database) then once again
i modified the DataType from DEC to NUMC and transported to Quality server then still it is giving an information error that
(Table Z does not exist in the database) please help me out in this issue.
Thanks in advance.Hi Jayanthumer,
Have you Activated (Ctrl + F3) the Table in SE11 before transporting to Quality server ?
Try to activate (Ctrl + F3) the table in SE11 of your Quality server...
It may not be imported properly into Quality server...
Ask to BASIS person about errors/warnings while importing to Quality Server..
Also activate all dataelement and domains.... make sure all things are active...
Once you activate it then it will create the table in database... till then there will be no table in database...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
View-does not exist on the database
Hi Experts,
Our Data Source/Extract Structure (R/3) is based on a view.
There is an Issue with the View/DAta Source
If i go to SE11>view Name> Display then i am getting
'View ZART_ATTRS is not in the database' and then the next screen is the view definition
This is a database view which is defined in the ABAP/4 Dictionary but does not exist on the database. No data can be read for this reason
If i go to RSO2 and enter data source name and select display...
Then it will display data source status as 'Saved' how can i activate it
and i go to RSA6 select my Z data source which is based on the above view....context menu display data source/Check data source...when i get error
'Only Tables and views are permitted for extraction'
How can i overcome itHi,
As your view is existing in ABAP DICTIONARY , you need to take help of your DBA to get this created in the underlying database. This can be created using Database utility se14 transaction code. But it is good to have your DBA involved so that you have proper table space allocated to it.
Hope this helps..
Regards
Manga(Assign points if it helps) -
Error: SNAP_ADT does not exist in the database - manual check required
Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
SuryHi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE) -
Component 0DAT (version A) does not exist in the database
Dear experts
i got this error.
Component 0DAT (version A) does not exist in the database
http://static.flickr.com/20/71394172_655d295b7f_o.jpg
A SAP expert recommended
"Use BC to activate the variable 0DAT from InfoObject 0CALDAY."
but i can't find 0DAT.
http://static.flickr.com/35/71390830_1049df5c3a_o.jpg
my system is
http://static.flickr.com/35/71390831_c837af0b47_o.jpg
Thanks in advance
David.kang
Message was edited by: David Kang
Message was edited by: David KangMentor Eugene,
I guess the issues are related to "Sneak Preview version".
well, instead of creating new 0DAT,
i edited the RSZGLOBV table with 0DAT that i created before.
http://static.flickr.com/20/71437761_de16ddee16_o.jpg
http://static.flickr.com/34/71437760_5236824cc2_o.jpg
so two rows were changed. (from 6 to 4 ).
http://static.flickr.com/34/71437762_ed172b5577_o.jpg
<b> What do you think it is okay ? </b>
Finally, i can get rid of " Component 0DAT (version A) does not exist in the database " message.
therefore i expect everything goes well.
but ..
"Information No texts were maintained in language E for variable 0DAT " comes up.
Refer to the screenshot ( http://static.flickr.com/35/71439173_5c996d2111_o.jpg )
[Query Designer screenshot ]
http://static.flickr.com/34/71440191_b2a96a2ac4_o.jpg
[Material Number Master Data ]
http://static.flickr.com/34/71440190_a827c571ae_o.jpg
[Original Data file ]
http://safariexamples.informit.com/0201703661/IO_MAT_TEXT.csv
http://safariexamples.informit.com/0201703661/IO_MAT_ATTR.csv
mentor Eugene! thanks a lot.
with kind regards
David -
Delivery 100000093 does not exist in the database or in the archive
Hi
I have created delivery and the delivery number also given, but i am getting error like Delivery 100000093 does not exist in the database or in the archive
the details are not in LIPS LIKP tables delivery numbers also not there.
Please tell me where was the wrong?
thanksHi Sarveswara ,
Please check assigned Number range to your Delivery Document whether complete range has been utilized.
Cheers !!!
Imzo
PLEASE DONT CLOSE THE THREAD WITH FUNNY CHARACTER -
This query does not exist in the database in the system
I have created a query, but when I run it, I receive this error:
You have attempted to open query 0DAT from the Query Designer.
However, this query does not exist in the database in the system to which you have made a connection.
Thanks
Joseiltondear Joseilton,
the variable 0DAT ist not in active version in your system.
Use BC to activate the variable 0DAT from InfoObject 0CALDAY.
or
you have to create it in your system. therefor change the namespye to SAP-namespace (starting with 0). Open one Query in your system via RRMX and select CalenderDay to create a new variable.
name: 0DAT
descrition: current calender day
processed by: SAP EXIT
Characteristic: Calender Day
variable represents: Single Value
best regards
imberaureus -
"Delivery 80001021 does not exist in the database or in the archive"
hi,
i am creating delivery document and save the delivery but while I'm checking the delivery doc no the system is showing following error "Delivery 80001021 does not exist in the database or in the archive"
please help
thanks
amitAmit,
This problem is due to a program error. Talk to your devloper in order to solve it.
I copy & paste the below text or solution from OSS 993005. Check that for complete info.
Reason and Prerequisites
The problem is caused by a program error.
Solution
Implement the attached correction instructions.
After you confirm error message VL 559 "Delivery &1 does not exist in the database or in the archive", the system branches to either
the inbound delivery (DISPLAY) that was displayed or changed beforehand, or
the inbound delivery that has just been saved (also in display mode).
If no delivery was saved before you switched to 'Other inbound delivery', the original transaction is started again (for example: VL31N).
Regards,
Sats. -
SE14 Status-UPGRADE-Table does not exist in the database
Folks,
I have created a ztable with SPRAS and few Char fields and generated a table maintenance generator.In the Dev it is working fine but when I moved the TR to Q TR ended up with errrors "Generation of Programs and Screens".When I check in Q in SE11 I am able to see the table but with an error message "Table doesn't exist in the database".
SE14 Status for this table is getting shown as UPGRADE in Q.
Can anyone here throw some light on what exactly this status UPGRADE means and how it gets set in SE14.
In DEV,I had checked the DATABASE OBJECT>>CHECK>DISPLAY and RUNTIME OBJECT>>CHECK>>DISPLAY and it is showing Database object is consistent but where as the same in Q is showing "Table is not created in the Database".
K.Kiran.Hi.
Is Q system is newly copied? Also please check the transport order of the table creation request. Also check whether pwd of the DB user is locked?
Regards,
Vimal -
Index mentioned in AWR Report does not exist in the database
Hi,
I have a situation where the index object mentioned in the AWR Report is not present in the database. The object has not been dropped, is not present in the recyclebin either. The object name is mentioned as PK1_IDX in the report. The object with the name PK_IDX is present in the database. Any ideas?
Thanks
CharlesXtreme wrote:
Hi,
Please let me add additional information.
The AWR Report section Segments by Physical Reads shows that a particular index object shown up in report as PK1_IDX has 72% of physical reads.
But the index object PK1_IDX is not present in the database
The index object with the name PK_IDX is present in the database.
SQL> select object_name,object_type,last_ddl_time from dba_objects where object_name like '%PK_IDX%';
OBJECT_NAME OBJECT_TYPE LAST_DDL_
PK_IDX 09-DEC-08
Does oracle create indexes at runtime with a names as PK1_IDX during execution?No, not a thing that I know of. As I said, can you trace the query ans see if its truly using that said index?
Aman.... -
SRM MDM, Error, "Table with Code 'null' does not exist in repository"
Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
MunishHi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish -
Hi Every one,
An error has occurred during report processing. (rsProcessingAborted)
Get Online Help
Query execution failed for data set 'NonFinTran'. (rsErrorExecutingCommand)
Get Online Help
Cannot drop the table '#NonFinTran', because it does not exist in the system catalog. Cannot drop the table '#MultipleNonFinTran',
because it does not exist in the system catalog. Transaction context in use by another session.
NOTE: NonFinTran &
MultipleNonFinTran are
the Temp table in my storedPoc.
Please any help me to solve this issue.
Thanks & Regards,
Anil Kumar
Anil KumarHi Harsh,
Below is my Stored Proc
SELECT @ServerName=datasource from master.dbo.sysservers WHERE catalog='Voyager'
SELECT @ServerName3=datasource from master.dbo.sysservers WHERE catalog='AuditLog'
SELECT @ServerName2=datasource from master.dbo.sysservers WHERE catalog='Portal'
IF @ServerName IS NOT NULL SET @ServerName='[' + @ServerName + '].' ELSE SET @ServerName=''
IF @ServerName3 IS NOT NULL SET @ServerName3='[' + @ServerName3 + '].' ELSE SET @ServerName3=''
IF @ServerName2 IS NOT NULL SET @ServerName2='[' + @ServerName2 + '].' ELSE SET @ServerName2=''
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
CREATE TABLE #NonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
CREATE TABLE #MultipleNonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
INSERT #NonFinTran
EXEC('SELECT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, DateTime, '''', '''', '''', ''''
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''ChangeBillPayDefaultAccountEdit'',''ChangeExpiryUserPassword'',''ChangePasswordEdit'',
''ChangeUserPassword'',''ManageAddressMaint'',''ManageContactMaint'',''ManageSecretQuestionAnswerEdit'',
''ManageTransLimitMaint'',''OtherBankAccountMaintAdd'',''OtherBankAccountMaintDelete'',''OtherBankAccountMaintEdit'',
''WithinAmBankAccountMaintAdd'',''WithinAmBankAccountMaintDelete'',''WithinAmBankAccountMaintEdit'',
''SetAccountMaskPreferenceAudit'',''ChangeLoginIdAudit'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
INSERT #MultipleNonFinTran
EXEC('SELECT DISTINCT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, Audit.DateTime as AuditDateTime,
(SELECT DISTINCT SUBSTRING(A.BranchCode,3,3) FROM ' + @ServerName + 'AuditLog.dbo.CCAuditLogEntryView X INNER JOIN ' + @ServerName + 'Voyager.dbo.CCuser U
ON X.UserId = U.UserId INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_CustomerProfile P ON P.EnrolId = U.TAXID
INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_AccountListing A ON A.CIFNO = P.CIFNO
WHERE X.UserId = Audit.UserId AND A.AccountNo = SUBSTRING(Audit.TrxField1,11,16) AND P.CIFNO = A.CIFNO
AND (SUBSTRING(A.BranchCode,3,3) <> NULL OR SUBSTRING(A.BranchCode,3,3) <> '''')
AND CHARINDEX(''AccountID='', Audit.TrxField1, 1) > 0),
SUBSTRING(TrxField1,14,1), CASE WHEN CHARINDEX(''AccountID='', TrxField1, 1) > 0 THEN
SUBSTRING(TrxField1,11,16) ELSE '''' END, CASE WHEN CHARINDEX(''AccountType='', TrxField2, 1) > 0 THEN SUBSTRING(TrxField2,13,3) ELSE '''' END
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''SetAccountAttributesAudit'',''SetAccountFriendlyNameAudit'',
''AccountProfileMaintULDelete'',''AccountProfileMaintLHAAdd'',''AccountProfileMaintLSCAdd'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
SET @stmt = '
SELECT * FROM
SELECT BranchName,
CASE WHEN SUBSTRING(FromAccountID,1,6) IN (''519901'',''559409'') THEN ''DC''
ELSE
CASE FromAccountType WHEN ''01'' THEN ''SA '' WHEN ''02'' THEN ''CA '' WHEN ''03'' THEN ''FD ''
WHEN ''SA'' THEN ''SA '' WHEN ''CA'' THEN ''CA '' WHEN ''FD'' THEN ''FD '' ELSE FromAccountType + '' ''
END
END +
case when Len(FromAccountID) =16 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4) END
when Len(FromAccountID) =15 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3) END
ELSE FromAccountID
ENd
AS FromAcctNo,
CASE TrxId
WHEN ''AccountProfileMaintLHAAdd'' THEN ''Link Account/Card''
WHEN ''AccountProfileMaintLSCAdd'' THEN ''Link Account/Card''
WHEN ''APMFamilyFirstAdd'' THEN ''Link Family First Account''
WHEN ''AccountProfileMaintULDelete'' THEN ''Unlink Account/Card''
WHEN ''BalInqFD'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE ''Fixed Deposit Balance Inquiry'' END
WHEN ''BalInqCASA'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Balance Inquiry''
ELSE ''Current Account Balance Inquiry''
END
END
WHEN ''StopCheck'' THEN ''Stop Cheque Request''
WHEN ''CheckReorder'' THEN ''Order Your Cheque''
WHEN ''CheckInquiry'' THEN ''Cheque Inquiry''
WHEN ''TransHistFD'' THEN ''Fixed Deposit Transaction History''
WHEN ''TransHistCASA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Transaction History'' ELSE ''Current Account Transaction History'' END
WHEN ''StmtInqCC'' THEN
CASE WHEN FromAccountType IN (''DR'',''03'') THEN ''Debit Card Statement Inquiry'' ELSE ''Credit Card Statement Inquiry'' END
WHEN ''StmtInqDA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Statement Inquiry'' ELSE ''Current Account Statement Inquiry'' END
WHEN ''StmtReq'' THEN ''Printed Statement Request''
WHEN ''StmtInqIAMSTAR'' THEN ''E-AMSTAR Statement Inquiry''
WHEN ''Repayment/Transfer Inquiry'' THEN ''Repayment/Transfer Inquiry''
WHEN ''Account Inquiry'' THEN ''Account Inquiry''
WHEN ''Payment Inquiry'' THEN ''Payment Inquiry''
END AS TransType,
FirstName AS CustomerName,
TaxId, CONVERT(VARCHAR, DateTime, 103) AS Date, CONVERT(VARCHAR, DateTime, 108) AS Time
FROM #NonFinTran, ' + @ServerName3 + 'Portal.dbo.TB_Branch AS TB_Branch
WHERE
BranchId = TB_Branch.BranchCode
AND (TB_Branch.InstCode IN (''00001'', ''00003'',''001'',''002''))
AND (FromAccountType IN (''SA'', ''CA'', ''FD'', ''01'', ''02'', ''03'')))'
EXEC (@stmt)
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
Anil Kumar
Maybe you are looking for
-
How can I add a category in the budget template for pages on the iPad?
I can add a category in the budget tab and it will automatically be added to the pie chart summary and the bar graph actual vs. budget portion, but I can't seem to add an option in the categories column on the transactions tab. Anyone know how I can
-
Embedding image in PDF works fine in CS2 but not CS3
When we create a PDF from CS3 with the images embedded and then open it on a CS2 machine it warns us about the fact that the file was created in a newer version of illustrator and then opens the file. When we try and open the file on a CS3 machine it
-
Hooking iPad to HDMI TV, no video, just audio. Any tips?
Original iPad. Keynote presentations show up. Just no video. TIA
-
Can I use the "Apple" name in my iOS app?
I am making an iOS dev application for iphones and iPods. I was wondering if i can put the "Apple" name in the credits section without getting introuble witht them or getting sued? Its a silly question but just wondring.
-
Problem with red badge in safari
Hi to all i have a problem with safari icon bacause always show a red badge on it with number 3 in red how can i resolve?thanks for help