Licence IP check only on first interface?

Hello,
our hoster had to change the ip configuration of our machines. We lost
the IP mentioned in the licence. So we ordered a new licence via our
customer for the new ip (which is configured on hme1, hme0 is the
service lan used for backup etc.).
Weblogic refuses to use the new licence, complaining that the ip
configured on hme0 is not in the licence file, which is correct. We
configured the weblogic.system.bindAddr to use the hme1 interface
only, but still the licence is not accepted.
We can't exchange the interface configuration, and the hme0 ip might
change again (the hoster is free to do this)!
Is it possible to tell weblogic (5.1sp6) to accept the hme1 ip?
Regards,
Dirk

Hi..,
Onli on First page means ... this node will get executed on the first page irrespective of the page name i.e it considers onli &page& eq 1...
Suppose u have ur fist page i.e MY_FIRST_PAGE.. and in this page the data in the main window may trigger the same page as second page .. i.e if the data in the main window is not sufficient to fit in the first page it triggers the next page i.e MY_FIRST_PAGE as second page ...
so this MY_FIRST_PAGE may extend to the second page also right !! so when u use on page MY_FIRST_PAGE.. this node will get triggered if this page extends to more than one page also..
Hope u understood....
regards,
sai ramesh

Similar Messages

Print the Check information in the AP pay check only in first page

Hi All,
I am using embedded BI publisher to develop RTF template. I have a requirement,
I have to print a AP Pay check using BI publisher desktop tool.
At present I am printing the invoice lines and then printing the check info in the last page. But our client requirement is to print the check info in the first page itself.
I divided the page into two parts. First part is to print the invoice details and second part is to print the check info.
In the first part I am print at max 40 lines. if at all one check doesn't have 40 lines then I will fill the empty space for the remaining lines.
If at all the details have more than 40 lines I will break the page at 40th line and print the renaming lines in the second page.
I want to print the check details at second part of the first page.

As I understand, you have one header which is set to appear every alternate page. Now you have another content which you want to show only on first page. In that case any content.. say an image, which is there on the page will appear only once.. (unless it is placed in the header section of RTF). It seems you have invoice number and address which should appear only on the first page of invoice... so just keep these two items at the top of the body of the RTF (not in the header). Just make sure that it is enclosed within the for-each-group@section logic, so that whenver the new invoice number appears it moves to a new page and you will see the address and invoice number there.

Only display first form URL in formsweb.cfg . mutiple URL does not work

Hi Friends,
I have 4 form application with 4 URL.
app. server as 10g in window 2003.
URL like as:
http://salerpt.com/forms/frmservlet?config=emis-srmenu
fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
in formweb.cfg file
baseHTMLjinitiator=basejini.htm
workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
# Forms runtime argument: which form module to run
##form=test.fmx
## i moved bottom section of form section in here and before
##line as Forms runtime argument: database connection details
comment two line
#jinit_exename=jinit.exe
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
I create 4 sections as
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Information System (SIS)
form=regsale.fmx
form=salefinincial.fmx
form=rptinfo.fmx
However it only display first srmenu form interface that i put in( 4 different URL. only display first URL)
It seems that one formsweb.cfg, it doesn not support multip form setting application.
I have 4 small forms application with 4 URL for one formsweb.cfg.
What should I need to do? I think that i miss some set up in configuration.
I am waiting for your help!
JIm

Hi Bgrant,
Please review my formsweb,cfg.
Thanks
I am looking for your help.
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory= C:\OraMid\forms\sales-Forms
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
#form=test.fmx
[[srmenu]]
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Management Information System
[[regsale]]
form=regsale.fmx
width=1200
height=1500
pageTitle=Sale Management Information System
[[salefinincial]
form=salefinincial.fmx
width=1200
height=1300
pageTitle=Sale Management Information System
[[rtpinfo]]
form=rptinfo.fmx
width=1200
height=1000
pageTitle=Sale Management Information System
# Forms runtime argument: database connection details
userid=scott/tigerd@oracleapp
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
#width=750
width=1024
# Forms applet parameter
#height=600
height=768
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
#jinit_exename=jinit.exe
#Version=1,3,1,22
# Parameter related to the version of JInitiator
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_sales.com_0Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group, orclApplicationCommonName=formsApp_sales.com_0A4911717Fxxxxxxxxxx, cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=False
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

When downloading a file, only the first word of the attached file is included in the 'file name' field, not the entire file name, as it used to.

Regardless of filetype, only the first word of the file is filled into the "Enter name of file to save to..." dialog box. I'm set up to 'save file' in the FF Options > Applications tab for the basic MS and Adobe files. To successfully use/find the downloaded file, I type in the remainder of the file name. Have I overlooked an additional setting? Running FF 18.0 on a Win7 PC.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is that the server sends a wrong response header.
The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
* https://developer.mozilla.org/en/Firefox_8_for_developers#Network

I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it xtill says its syncing. However, nothing happens. How do I fix this?

I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it still says its syncing. However, nothing happens. How do I fix this? I have restored and updated the ipod. I have the new iTunes. I have restarted my computer checked the connection and everything.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Cheque printing only on first page

Hi,
Iam a newbie in XML/BI Publisher. I am doing a AP Cheque printing. In the report I have to print the invoice lines and at the bottom of first page I need to print the cheque. I did all necessary stuffs for this in the RTF template.
But now the cheque is getting printed in the second page if the lines comes to the second page or after printing the lines if there is no space for the cheque then its getting printed in the next page.
Can anyone guide me how to print the cheque only in the first page bottom alone.
The sample output which I needs is like this,
page 1-
Invoice line number
line.
line.
line.
line.
line.
line.
line.
|..............................|
| cheque print...........|
page 2
Invoice line number
line.
line.
line.
line.
line.
line.
line.
line.
line.
line.
line.
line.
line.
line.
thanks a ton in advance.

Hmm,
There is no way you can say fix that and show this only in first page.
but you can achieve it.
1st method.
give enough space for the check in the first page, by reducing the no of lines in the first page, so that you can accommodate the cheque .
for this, you can do like,
if the position is less than 9 and mod of postion is zero , that means you are in 9 line, then call a sub-template and after that you can put a page-break. this condition is for first page only.
now put an another if condition here, if the position is > 9 and position mod X is zero, then put a page break. x is no of lines to be displayed in 2nd, 3rd, 4th pages.
2nd method.
put the differnet header and footer for first pge.
and cal the sub-template in footer of first page.
in tht sub-template you have the check.

Acrobat X Pro Only Prints First Page

I have several multipage PDFs that I am trying to print to my HP LaserJet 5si MX. I am on OS X 10.6.5 with all the latest updates applied. When printing, only the first page prints and then the printer queue clears as though the whole document printed.
The PDFs print fine in their entirety from Preview. I tried Reader 7.0.7 which also works fine.
Reader X has the same problem as Pro.
I checked for update printer drivers, but they are included with OS X and HP has no updates.
Thanks for any help!

I have had the same experience. My HP 4050 reported "Insufficient memory" after printing the first page. The PDF was created with Acrobat Pro X by combining PDFs sent as attachments. The file is 238 KB, and is printed without difficulty using Acrobat Pro 9.
Bpb Stoothoff

Char displaying only the first three characters in the cube

Hi Experts
I have a char with lenth 60 and it's active.I am updating this char via the update routine whereby i am reading data from an active table of an ODS as i update in the update rules.
But surprisingly,once the load is succesful and complete,upon checking the data in the active table it's displayin the way it should be the problem comes in when I view the data on the cube which displays only the first three chars even if the descriptionis a 60 character field.
Please help

Hi Herbert,
Have you checked in the infosource or transfer rules, what is the length of the infoobject, if you are loading the data to PSA, please check there it self, whether it is displaying 60 characters or only 3 characters.
Thanks
Sat

Mac: When I click on a misspelled word in the body of an email the spell checker defaults to first word in the email even if it already spelled correctly

The spell checker identifies incorrect spelled words, however when I right click or control click the word the spell checker only highlights in yellow the first word in the email and gives a dialog with the spelling and definition even though that word already correctly spelled. This is version 33.1 on my mac desktop running 10.10. Spell checking works properly if I use Safari.

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Some images do not display in browser, iPad Air 2. When I load a page with several jpgs (one 1920x720, then 8-10 800x800px), only the first few are shown. Behaviour is similar for Safari and Chrome. Website issue or iPad?

I have just bought an iPad, partly to check that my websites work OK on mobile devices. When I load a page with several jpgs (e.g. one 1920x720, then 8-10 800x800px), only the first few are shown. If I remove the large one, that sometimes fixes the problem. Behaviour is similar for Safari and Chrome. Is this a website issue or iPad?

Sorry, I didn't make myself clear. I'm using a new Wordpress theme that is meant to be responsive. The large image is for a header, than you scroll down to see the rest, one by one. Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500. It's the new pages and those I've updated that are causing the problem. On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
Here's the website with its new theme: http://www.new-zealand-pictures.com/

64-bit driver only returns first row of table

I have a C++ application using ADO (the MSADO COM components) and the Oracle OLEDB provider for database access. The application works fine on a 32-bit computer using the 32-bit Oracle client and driver. However, when I run a 64-bit build of the application, running on a 64-bit computer (Windows Server 2008 x64), using the 64-bit Oracle client and driver, a SELECT operation returns only the first row of the table.
Note that this is only happening with the ActiveX ADO components. ADO.NET is not having a problem.
In both cases I am connecting to the same database, which is Oracle 10.2 (32-bit) running on a different server. I have tested with Oracle client 10.2.0.4 and 11.1.0.7 and got the same result in both cases.
I have reproduced the issue with a simple table (one column, NVARCHAR2(255)) and simple code.
In the code, I execute "select count(*) from tablename" and get the correct record count (more than one record). But when I then open the recordset ("select columnname from tablename"), ADO reports EndOfFile after I have read the first row and called MoveNext on the recordset.
My Oracle knowledge is limited so I don't know if there are driver properties I should be checking.
Anyone have ideas?
Thanks in advance.

For 10.2 it's fixed in 10204 Patch 21 and higher.
For 11.1 it's fixed in 11107 Patch 12 and higher.
Cheers,
Greg

My spell check only works for about half of an article. Is there a way to fix this?

When I'm on a wiki, looking at an article, I sometimes see a couple spelling errors that just bug me, so I sometimes go in and fix them. However, when I pull up the editing page, the spell check only works for about the first half of the article. I can't find the errors if they're in the second half of the article. Is there a way to fix this?

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Missing parts list shows only the first material.

in case of MTO cycle, when i create a plnd order to prod order,in material availability check, system is not displaying all the materials for which shortages are there, instead its showing only the first material.
any help

You need to ensure that these materials are actually missing. You check this in transaction CO09 (SAP Note 89362). The checking rule will be whatever you assigned to the production order type in OPJK.
Also, you need to ensure that the "missing" materials are actually checked for availability - The checking group is assigned in the MRP3 tab of the material master. In OVZ2, look at the entry for this checking group and ensure that "No Check" is not ticked.

UploadedFile & https Only work first time upload ????

I am using 10.1.3.4 Jdev. I use UploadedFile interface to upload files from local PC and ftp files to unix server. My "upload" web page works between my local PC and Unix server, but it only works first time upload file and ftp between
https server (application server--weblogic 10.0) and Unix server. If I just use http without SSL and my codes work fine you can upload file as many times you want and ftp them to Unix server. I used FTP not sftp to transfer files from application server to unix server. Can anyone shed some lights on my head ???? Thx.

Yes. I changed my code to SFT from ftp. it works. Thx. This URL for sftp: http://www.jcraft.com/jsch/ and is very good .
Edited by: albertpi on Feb 11, 2010 8:05 AM
Edited by: albertpi on Feb 11, 2010 8:05 AM

PrinterJob only print first 2 pages of JTable

Hi,
I have a JTable in which rows have different height. I also have a class which implements Printable interface. In this class I put the JTable in a JFrame and create my own print() method. The problem is when I call
PrinterJob.print() to print the JTable only the first two pages were printed out; on the other pages I only got title name without contents. If I show the JTable before printing it by calling JFrame.setVisible(true) in the Printable class then I can print out all pages. How do I fix this problem?
Thanks.

The ExportPDF forum is http://forums.adobe.com/community/exportpdf

Licence IP check only on first interface?

Similar Messages

Maybe you are looking for