License not present. With the trial version only limited replays are allowed -- Flex builder 4.5 Premium eclipse plugin with SDK 3.5

Hi ,
We are using Flex SDK 3.5 and using eclipse to build the war in order to make it automation compatible , Right now we tried with Premium version of Flex Builder 4.5 eclipse plugging to build and make application automation capable. But we are facing issues in terms of license , After deploying the automation compatible build we are getting error message "License not present. With the trial version only limited replays are allowed".
Previously we are using Flex Builder 4.0 and everything was working fine .
Is Flex Builder 4.5 doesn't support SDK 3.5 ?
Please help .
Thanks in advance
Thanks and Regards
Sunil Kumar

with trial version (FB basic) you can record/replay only 30
script lines. You need to buy FB pro license to remove this
restriction

Similar Messages

License not present. With the trail version only limited replays are allowed... Qtp automation

Hi All.
We are doing QTP automation testing for our flex application. But after running all 30 tests it is showing License not present. with the trail version only limited replays are allowed. We are using flex sdk 3.5 and flash builder 4 plugin for eclipse. we are building our application using ant and we are deploying the application directly and testing it. Can any one tell Steps to resolve this issue...
please step by step required..
Thanks
Ram

You need to have valid premium license for Adobe. Only then it would work.

Flex Builder 4.5 Premium license not working for automation - anything else to try?

So I'm getting the message when I try to record/run a test that the "License not present. With the trial verison only limited replays are allowed." I have a valid license key for Flash Builder 4.5 premium edition. I have read many forums on this subject but none of them help me. I compile my project either using Flash Builder 4.5 or an ant script invoking mxmlc. I have modified my flex-config.xml to include "flashbuilder45", and my given serial number with and without dashes (and other combinations). I do not have a license.properties file. I'm not sure what else I can do. I have already reinstalled Flash Builder 4.5. I am now trying Flash Builder 4.6 with the same results. This serial number is a group one good for 5 boxes. My next step is to request a replacement serial number from Adobe, since I can't think of anything else that could be wrong with my setup.

1. It is a premium which I can see when I view "My Products" on this adobe site. I can enable Network monitor and when I do my application hangs (I've read a bit on how to get this working properly, but I don't need it)
2. It is an FB serial number. Here is what it is under My Products:
Serial Number: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
Application or font: Flash Builder Prem
Version: 4.5
Platform: Multiple Platforms
Date: June 7, 2011
3. Yes I have. I have uncommented
<licenses>
      <license>
         <product>product</product>
         <serial-number>serial-num</serial-number>
      </license>
   </licenses>
which sits one level down within <flex-config/>
Under product I have tried "flashbuilder45", "flashbuilder4", "flashbuilder46", and even "flexbuilderXX" a few times. Under my serial number I have entered the serial number as shown in My Products - I have tried tried it with dashes, and without.
I found this post
http://stackoverflow.com/questions/6993096/how-to-properly-define-the-flashbuilder-4-5-pre mium-license-for-a-maven-flexmojo
which says "the serial-number element is NOT the license number that we got from Adobe (and that we use when installing the Flash Builder tooling) but it is a derived form of that license number that can be found for example in the license.properties file of a developer that has Flash Builder installed". However I have read conflicting reports about this. At any rate I do not have a license.properties file, which I assume was discounted after flex builder 3.x.
4. Yes, using FlashBuilder and my ant script. I have also cleaned my browser's cache. The problem persists.

I am wanting to download the trial version to evaluate,

i am wanting to download the trial version to evaluate, There are several options for this I am running windows 8.1 undate one, desk top just my little world where i design everything, Is this possible to work i try down loading workbench it stalls

We being a state agency, we have many security measures in place on our servers. It seems that all IT had to do was make an addition to our proxy. Problem solved. Everything downloaded fine and is working great. Now the fun/work begins.

Only asset postings are allowed in this account

Hi All,
My client upgraded SAP System from 4.6 to 6.0. While testing the depreciation run in AFAB, it is showing the error as "Only asset postings are allowed in this account". We have checked all the settings relating to GL Accounts for Depreciation and Accumulated Depereciation. All are correct, like Depreciation account is a P&L Acccount and Accumulated depreciation account is a Balance sheet Asset reconciliation account. Checked the account assignement in AO90 as well. They are also correct.
The deprecaition was posted up to 2nd period and now we are simulating for 3rd period for which the error is showing, We did not change any configuration setting or the master data.
Is anybody having any idea why such error is showing ? Kindly let us know
Thanks
shankar

Hi,
The user has written a Validation for authorisation to run the depreciation with out proper message. The problem was solved when we run the depreciation with another user. Thanks all .
Regards
shankar

CR Add-on 2.0.0.7 Problem: Only Super Users are allowed access ...

Hi Everybody,
We have installed the latest ( to my best understanding) version of CR Add-on (2.0.0.7 , compiled for 64 bit , downloaded from Richard Duffy's blog) and we are receiving the error message "Only Super Users are allowed access to this function" .
We've checked that the users are all Super Users and they have Professional and Addon licenses.
The only relevant thread I've found in forums solved the issue by installing the latest version of CR Add-on, which we've did.
The installation is B1 2007 A SP001 ,PL 11.
Any ideas will be highly welcomed.
Thanks in advance,
Simon

We have the same issue, this happens when you go to Administration > Crystal Reports
We can't see the reports in CR
Please if you have a solution tell me.
Thx and Regards,

I ordered Office 2011 with my MBA, but only the trial version came installed - and no product key was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this.

I ordered Microsoft Office 2011 with my Macbook Air, but only the trial version came installed - and no product key for the full version was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this and I am at wit's end. Each company blames it on the other - I don't care whose fault it is, I just want the product key so I can use Microsoft Office! Please help.

You should have received a DVD in the box (with the MBA).
See: https://discussions.apple.com/message/12805337#12805337
Call AppleCare (they need to send you a DVD, which has the Product Key printed on the sleeve).

I had Acrobat XI Pro Trial installed on W8.1, and I had to uninstall it because issues with MS Office 2010. Now I try to reinstall Acrobat and It does not allow me to use the trial version anymore even it was not over. What to do??

Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.

The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

In the trial version of LR5, my NEF images (taken with a Nikon D7100) are not visible

I downloaded the trial version of LR5, then imported a set of images, shot with my new Nikon D7100, and saved as both JPEG and NEF on the memory card. When I imported them to LR, the JPEG images are visible but the NEF images are grey squares--although the image info (date, size, etc) show when the cursor hovers over the square. When I click on one of the NEF squares to open the image, "Could not read preview" appears instead of the image. I've used earlier LR versions and never encountered this problem so I have no idea what is going on.

Personally, I don't understand why anyone uses that utility to download their images. The import dialog in Lightroom works perfectly to do that transfer. I don't know if Nikon Transfer is the culprit since you are using a newer version. But here is a link to a utility that you can use that is supposed to correct the problem caused by using Nikon Transfer. I have never used it, but have seen it recommended. I also have never used Nikon Transfer to download files from my Nikon cameras.
Fix Corrupted Nikon NEF Images

Not able to import photos from Iphoto with the trial version of Aperture

I just downloaded the trial version of Aperture 3 and was trying to import my Iphoto library to work with some of the photos in Aperture. When I go to File, Import, Iphoto library, the IPhoto Library is not able to be selected.
I can go into finder and see that I have an Iphoto Library and it opens with no problem, but for some reason I cannot import or open the library in Aperture, which makes me very hesitant to purchase the full version of the product.
Any help is appreciated.

Sounds to me like you are not in the Import dialog box.
What happens if you select File->Import ... ?
If that's not it, show us a screen capture.

I started a trial of creative cloud and downloaded lightroom. I decided to buy lightroom on amazon because I liked it. Now when I try to license the trial version of lightroom with the serial number, it says it's invalid. Why?

I started a trial of creative cloud and downloaded lightroom. I decided to buy lightroom on amazon because I liked it. Now when I try to license the trial version of lightroom with the serial number, it says it's invalid. Why?

The standalone version and the CC version are both the same exact program, but the licensing is completely different. It will be necessary for you to uninstall the creative cloud trial version and then install the one you purchased from Amazon. After you install, you will be able to open the same catalog and continue from where you were.

Do I not get the "open file after publishing" checkbox with the trial version?

I owned the Adobe Acrobat 8 Professional version on my pc, and recently bought a Mac. Do I not have the option to "Open file after publishing" checkbox with the trial version? Do I have to repurchase the whole program to get that?

uninstall.
download from prodesigntools.com.
if you follow all 7 steps you can directly download a trial here: New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Where can I download the trial version of Photoshop CS6 NOT Photoshop CS6 Extended

I'm trying to download the trial version of Photoshop CS6, but adobe just returns me the download page of Photoshop CS6 Extended. Where can I download that? Is that available as a trial?

The only way is to buy a license I have complained to Adobe for I do not want to be a beta tester and do not want to even see extended feature during a trial. I talk for over an hour with their support on the phone before paying for a licence. They told me the bug I wated fixed in CS5 was fixed in CS6 so I sprung for a license only to find out they lied the bug is still in CS6 andAdobe has added additional bugs. Things that work in the past now have bugs. IMO what I paid for is a beta not a good release so many Actions and Scripts fail if your preferences is set to edit in floading windows. The Only way to even use CS6 it to edit with preference set to open in tabs then float windows with tabs option in effect. New features support like Bicubic Automatic was not added to Photoshop Scripting which breaks Script that reference a users interpolaton preference when the preference is the default Bicubic Automatic. Installing the Script listener disables the new allow tool recording option. The new Allow Tool Recording is machine dependant recording a massive amount of data on fast machine and a small amount of data on slow machines. Playing an action that record tools on a fasts machine when played on a slow machine is unuseable. There is at least one new bug in the Action player and one new bug in the Action recorder. The there are other new features like content aware move the feature may work on a document where the move is relatily easy to pull off. Professional as well as well as amatures tha pay the price for Photoshop want tools that are well designed and work not tools that may work on some machines or work on easy problems not hard ones. IMO CS6 as is is beta code and has some design flaws as well.

Can I download the trial version of photoshop and use it as the full version with my serial number?

I have photoshop 6.0 on my current computer, I got in in college 4 years ago and the disc subsequently came to a tragic end after a collision with my dogs teeth T_T I still have the serial number though. My problem is I've just bought a new computer and I was told that to transfer photoshop to my new computer I had to deactivate it on my old computer and then download the trial version using the original serial number. Will this work?

Is this Photoshop Elements 6 or Photoshop 6? Either way this would not be the current version so it will be difficult to obtain the installation files as we only offer replacement media for the current version. If you have your serial number though you will qualify for upgrade pricing. For additional details please review http://www.adobe.com/products/photoshop-elements.html.

After install the trial version of LR 2.3, it only displays as grayscale.

I installed the trial version of Lightroom 2.3. When I open the program and import pictures, I can only see them as grayscale images. I feel stupid, but what am I doing wrong? How can I view them as the color images they are and edit them?
Thanks, Phillip

I still can not figure this out.
Windows XP SP3
Lightroom will apply the filters and if you save or export the "change" photo, you can see the result.
However, the entire workspace is desaturated with no color except for the color flags. They actually display in color. (see attached jpg).
It would be nice to see this program work as I am interested in purchasing it.
I deleted all catalogues, uninstalled, cleaned out all I could from through regedit, reinstalled, didn't change a thing.
Any other ideas would be helpful.
Thanks.

License not present. With the trial version only limited replays are allowed -- Flex builder 4.5 Premium eclipse plugin with SDK 3.5

Similar Messages

Maybe you are looking for