Licenses problem

I bought Adobe CC products (6 Suite, 11 Photoshop, 4 Illustrator ) in promotion (for license holders box CS3 and up) but it turned out that I do not have the number of full licenses purchased fundamental as in promotion(5 missing). Is it possible fee for a license without promotion or otherwise legalization of these licenses?

You may buy any Cloud subscription you need
Special Photography Plan
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
You will receive a discount only if you have a qualifying previous product... but not having a qualifying previous product does not stop you from using the links above to buy a subscription

Similar Messages

New hard drive and photoshop license problem

I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
The hard drive in this computer failed, and it has been replaced. I used an image backup from Acronis True Image 10 to "restore" the new disk.
Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
I didn't find any helpful info on the "Product Activation" web page.
I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
The only relevant item I could find is this:
"Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
So does that mean I have to "reactivate" Photoshop CS2? If so, do I use the Activation window that is displayed when I open Photoshop? The serial number has 20 characters. Will the Adobe (re)activation recognize this old serial number? If not, what do I have to do to get this product usable again?
Please help.

>replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

Old Mac died. Have PE 9 and while it installs I get a licensing problem I have the original discs and the serial

Old Mac died. Have PE 9 and while it installs I get a licensing problem I have the original discs and the serial. How do I fix this? I don't need the new version and I just want to use what I have already paid for. Error 213:5

Did you migrate over the data from your old computer? If so, there's probably something you brought over that knows it's not on the same hardware as before. In that case you need to run this:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
and then go around and manually remove all the bits and bobs, not just from applications but also from hard drive>library>application support>adobe and from your username>library>preferences. Spotlight will not help you. You have to go looking on your own.
If that's not it--you just a message that you've used up your activations, you need activation support:
Activation & Deactivation Help
Start a chat session and they can get you straightened out.

License Problem .. what do I need ...

Dear all !
I have some license problems .. and want kindly ask for
advise ..
I had time fixed license which works fine ..
and then I got an update for the license ..
and merged the old and the new license with
the updateLicensefile.sh script ..
But when I start a container with > startWebLogic.sh
I got WebLogic: license has expired on Thu Sep 13 12:00:00 CEST 2001!
. and he seems not recognize the new license ..
So I tried to check which parts are missing ..
Expried is Connector, QASuite .. do I need them ?
For WebLogic, "SSL/Export, 2PC, In-memory Replication - Servlet,
In-memory Replication - EJB. EJB 1.1, EJB 2.0, JMS, Cluster,
Clustered JMS, jDrivers ..I have new licenses .. but
they are in a new license-group .. not
longer in release="6.1"
<license-group format="1.0" product="WebLogic Server" release="*">
So I'm really confused, what to do .. and
what is the missing license ?
My customer number is : DEU100683
Can anybody be so kind to help me out of this ?
The other question is, does BEA also provide normal
access to the newsgroups via nntp .. I would
prefer this .. which one is the nntp server ?
Thanks a lot !
Frank

Frank,
The java weblogic.Admin LICENSES utility lists the license that the server
is using.
If you had multiple licenses and did not know which one was being picked
this utility will help you.
http://e-docs.bea.com/wls/docs61//////adminguide/cli.html#1134397
Regarding the documentation error can you paste the url where you found the
error. I will make sure I inform the person responsible for that.
Regarding the information returned by the license utility I will follow up
with Engineering to check if it would be possible to change the format
returned.
Thanks
Raj Alagumalai
Frank Grützmacher <[email protected]> wrote in
news:[email protected]:
>
>
Raj Alagumalai wrote:
Frank ,
Regarding the UpdateLicense-script issue, the order in which the new
license is appended should not matter. As long as the server is able
to read the information from that file.
Please refer to this url for more information on the showLicenses
utility. This utility will provide information on what license the
server is using.
http://e-docs.bea.com/wls/docs61/////adminguide/utils.html#1117307
Hope this information helpsDear Raj !
Thanks a lot at first ..
but :
java utils.showLicenses .. doesn't really help , because
on the workstation it brings me : java.lang.NullPointerException ..
without
any further information and without stack trace ( this should be added
of course )
I also used .. weblogic.Admin which works to show the licens
information ..
but t seems only to list the contents of the license.bea in another way
not whether any of the liences makes sense and is valid ..
Then I also tried :
java utils.writeLicense ..
not very helpful too in this case .. also list only
the contents .. something like : you have a valid license
until xxx .. of this yyy components would help
more ..
BTW .. the documentation is wrong .. the Property is : bea.home ..
not bea.system.home .. and the example on a unix console with
-Dbea.home=d:\bea60 shows two things
a) this was not updated for 6.1 ..
b) you differ not , whether you are on unix or dos .. but you should
But this is all not important .. shows only that also BEA if far away
from being perfect,
this is from a developer point of view good .. because everyone is
failing somehow
every day .. but the license problem should not occure !
I sent the problem on Thuesday to the support , to see what can be done
so far no answer !
Thanks again for your kind help and hints !
Frank

2012 Licensing Problem

I would like to make everyone aware of an issue with RDS and the FIX from Microsoft services which I consider unacceptable.
The setup is as follows. One 2012 DC with Terminal server licensing installed. Two 2012 servers with RDS enabled. Take note that RDS was NOT deployed using the wizard as there is no need
for all of the resources of a server farm for 2 servers. On each of the RDS enabled servers, group policey was used to enable and specify the RDS server and licensing mode. The RD Licensing Diagnoser was used to verify, and report that no licensing
problems for the Remote Desktop Session Host Server existed, and the tray icon that reports that you are running a trial version of RDS does NOT appear.
Advance forward a few months and users start reporting that they cannot login and that they are receiving “The remote session was disconnected because there are no RDS license servers available
to provide a license."
After doing all that I could I filed a case with Microsoft Support at the Highest Level Possible. After a month I finally was able to talk to someone. After 2 more weeks, here is the solution
they gave me….
Open the registry, Navigate to HKLM\System\CurrentControlSet\Control\TerminalServer\RCM
Delete the GracePeriod Key
Reboot
This continues to occur every few months. I wish someone at MS would FIX the problem.
Lee

sure.
i have 5x 2012 RDS farms, nearly identical in configuration dispersed throughout the globe, each farm has:
2x RDSH
1x RDCB, RDWeb, RDLicense server with 2012 CALs deployed as User Mode
We are pointing directly to the license server in our collection settings (only 1 collection per farm) and also again via GPO settings to override license server auto discovery options
These systems were rolled out using scenario-based installs so while RDWeb is there, it's not actually being used (nothing published to it), users are leveraging session-based desktops via RDP client both internally and externally
systems are all domain joined, we're still on 2003 functional level in AD
i first encountered this issue around the 120 days mark after the first farm went into production, we saw that users could not login and event ID 1130 was being thrown for every login attempt.
i saw this article and followed the steps to resolve it:
http://www.360ict.nl/blog/no-remote-desktop-licence-server-availible-on-rd-session-host-server-2012/
however, after another 120 days passed, i ran into the same issue again, realizing this was not a permanent fix. after just opening the case with MS on this a couple of weeks ago, they've told me it's a bug and so for now, i proactively purge the
L$RTMTIMEBOMB_nnnn key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM\GracePeriod, i restart
TermService so i don't have to reboot the whole box and it's fine for another 120 days
during the issue and even when it's not occurring, licensing diagnostics come up clean, i haven't taken a report while the issue is occurring but when it's not occurring the reports show CALs being assigned to all users by the license server.
basically, it seems like even though we have a license server that is activated with user CALs, the Review section shows green checks under both sections, and reporting is fine - the system is stuck in 120 day trial mode for some reason.
now MS did say they know about this and they're working on a fix, hopefully not to just get me off the phone, but they didn't have a different workaround and advised that i continue doing what i'm doing.
what i don't really understand is that when i remove the L$RTMTIMEBOMB_nnnn
key from the registry, it gets recreated upon the first user logon that has to go talk to the license server. in a working 2012 environment, should this key even exist if an active license server is already available?

As soon as I try to open PDF a "licensing problem" screen appears...

I have reinstalled reader software but get the same message.

Hey -
Thanks for taking the trouble to respond - appreciated. I did post the details you requested and sent you IM about that. Anyway, the problem
appears to have fixed itself as soon as I opened Acrobat9 Pro it
reconfigured itself and everything is working again!
_Den
Date: Mon, 5 Dec 2011 20:22:47 -0700
From: [email protected]
To: [email protected]
Subject: As soon as I try to open PDF a "licensing problem" screen appears...
    Re: As soon as I try to open PDF a "licensing problem" screen appears...
    created by ʇɐb ɹəuəllıʍ in Adobe Reader - View the full discussion
What is your operating system? Can you post a screenshot of that screen?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4065853#4065853
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4065853#4065853. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photoshop Element 9 is not running on my new Dell E7240 laptop. Erreur :231:10. How can y solve the problem. Is it a license problem? My PC is very new, and PS9 is al little bit older.

Photoshop Element 9 is not running on my new Dell E7240 laptop. Erreur :231:10. How can y solve the problem. Is it a license problem? My PC is very new, and PS9 is al little bit older.

fixed with this method:
http://bbs.archlinux.org/viewtopic.php?pid=319710

MSSQLServer license Problem

I have downloaded WLSERVER6.1 for evaluation and when i try to run database connectivity from SQLServer200 it gives the license problem.The error is like thisjava.sql.SQLexception: $$$$$$$ License Exception $$$$$$$Missing License file for: Weblogic Server 6.1$$$$$$$$$ License Exception $$$$$$$$$$$$$$So any one can help

Make sure you add the bea home (folder in which you will find license.bea
file) to your classpath.
"Fahad" <[email protected]> wrote in message
news:3b8269ed$[email protected]..
I have downloaded WLSERVER6.1 for evaluation and when i try to rundatabase connectivity from SQLServer200 it gives the license problem.The
error is like thisjava.sql.SQLexception: $$$$$$$ License Exception
$$$$$$$Missing License file for: Weblogic Server 6.1$$$$$$$$$ License
Exception $$$$$$$$$$$$$$So any one can help

JCom License Problems on WLS 7.0

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

Audio and Licensing Problems

   I recorded a clip 1 hr and 50 min long using Sony PMW-EX1 in SD to On Location, exported the file in m2t format to external hard drive, then imported to Pre Pro CS3 on my editing computer. I loaded the clip into time line to begin editing and the first 30 min of audio played normally, then it started over to the beginning. The last 30 mins. of audio were lost. The 1 hr and 50 min. of video was normal. There is nothing wrong with the clip- it plays normally in Nero Show, and plays normally in On Location. This has happended to me before and I reshot the clip and all was well. This one can't be reshot. .
   I tried making a new preferences file- no help. I then reinstalled Pre Pro- no help. I tried reloading the clip .several times- no help. I reinstalled Pre Pro again- oops- now my license has stopped working. I've tried phone support several times, and I've tried web support. Phone support said they would call me back- they didn't. Web support suggested downloading and following the steps of an article from their knowledgebase (KB401528). I did so and this didn't work. When I went back to the article the message said this article doesn't exist. Now there's a problem with the website that won't let me submit messages- they disappear and aren't received. It seems all modes of communication with tech support are blocked.
   I'm really frustrated with Adobe Support. I see a letter explaining there are problems with tech support- no kidding. Does anyone out there have any suggestions? This is a commercial project with a very fast approaching deadline- all suggestions would be appreciated. First issue is to fix license problem because Pre Pro won't even open. Also need fix with audio problem. Thanks- Dorian

Dorian,
I take this to mean that you have one internal HDD (Hard Disk Drive), your C:\. It contains all of your OS and programs, plus your Windows Virtual Memory (Page File). All of your media, your Project and your Scratch Disks are on your external. Is that correct?
What is the connection type for that external, i.e. USB 2.0, FireWire 400 (IEEE-1394), FW-800 (IEEE-1394b) or eSATA?
USB 2.0 will yield really poor performance, and many have had issues using externals with this connection. FW-400 is a bit better, and likely a touch more stable, but FW-800, and especially eSATA, are much better to edit to/from. I use a bank of FW-800 externals, as I swap Projects between several computers and have not had an issue, plus the speed is OK.
Sorry to hit you with confusing questions. I'll break things down a bit more, and try not to use as much jargon in the future.
Good luck,
Hunt
Message was edited by: the_wine_snob - Edited typo

Week 6: No satisfactory resolution on licensing problem

In early November, presumably after the cyberattacks that targeted Adobe earlier this Fall, we received a notice indicating a problem processing the monthly payment for my Creative Cloud license. We provided new corporate credit card info for billing, but it never successfully renewed our license. Last week, we discovered that the license had expired, locking me out of my Creative Cloud products. Despite notifications from Adobe Support that the problem had been resolved, I am still unable to reliably access the Creative Cloud software.
I've tried logging out of the Creative Cloud client, then logging back in a few times. That allowed me to open either InDesign, Acrobat, or Photoshop once. Thereafter, and for all other products, I continue get the following sequence of messages: (1) Renew your subscription. If you've already renewed, press "try again"; (2) Thank you, your subscription is now active - press "continue" use your product, (3) Renew your subscriptio. If you've already renewed, press "try again" . . ." and so on, ad infinitum. Occasionally, I will get an "Adobe Software License Agreement" splash screen that temporarily lets me access the software, but stops working again once I exit the program and try to relaunch.
I'm so confused. Can someone please assist? I just can't afford to lose yet ANOTHER week of work because of licensing problems.

In early November, presumably after the cyberattacks that targeted Adobe earlier this Fall, we received a notice indicating a problem processing the monthly payment for my Creative Cloud license. We provided new corporate credit card info for billing, but it never successfully renewed our license. Last week, we discovered that the license had expired, locking me out of my Creative Cloud products. Despite notifications from Adobe Support that the problem had been resolved, I am still unable to reliably access the Creative Cloud software.
I've tried logging out of the Creative Cloud client, then logging back in a few times. That allowed me to open either InDesign, Acrobat, or Photoshop once. Thereafter, and for all other products, I continue get the following sequence of messages: (1) Renew your subscription. If you've already renewed, press "try again"; (2) Thank you, your subscription is now active - press "continue" use your product, (3) Renew your subscriptio. If you've already renewed, press "try again" . . ." and so on, ad infinitum. Occasionally, I will get an "Adobe Software License Agreement" splash screen that temporarily lets me access the software, but stops working again once I exit the program and try to relaunch.
I'm so confused. Can someone please assist? I just can't afford to lose yet ANOTHER week of work because of licensing problems.

Please SOLUTION!!!!!! License Problem: BT-6967, XP SP2 BlueSoleil BT Driver

Please SOLUTION!!!!!! License Problem: BT-6967, XP SP2 BlueSoleil BT Driver
Im so bored with this problem.. i need solution.. please!! MSI how is posible BlueSoleil can't work only Demo version if I downloaded by his page
any idea?

Quote from: jamesaddicted on 07-February-06, 19:51:23
where did??
HUH?

Firewall Cisco ASA 5505 new interface license problem

Hi
I have one ASA 5505 with a Base License
The problem is when i want to use a new named interface the system says "With current License maximum number of named interfaces allowed is 3. Name cannot be set for this interface"
And the question is if with this base license the interface cannot be used or only cannot be named?
here the output of my firewall:
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)
Hardware:   ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0    : address is e02f.6de6.7843, irq 11
1: Ext: Ethernet0/0         : address is e02f.6de6.783b, irq 255
2: Ext: Ethernet0/1         : address is e02f.6de6.783c, irq 255
3: Ext: Ethernet0/2         : address is e02f.6de6.783d, irq 255
4: Ext: Ethernet0/3         : address is e02f.6de6.783e, irq 255
5: Ext: Ethernet0/4         : address is e02f.6de6.783f, irq 255
6: Ext: Ethernet0/5         : address is e02f.6de6.7840, irq 255
7: Ext: Ethernet0/6         : address is e02f.6de6.7841, irq 255
8: Ext: Ethernet0/7         : address is e02f.6de6.7842, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces    : 8
VLANs                          : 3, DMZ Restricted
Inside Hosts                   : Unlimited
Failover                       : Disabled
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
SSL VPN Peers                  : 2
Total VPN Peers                : 10
Dual ISPs                      : Disabled
VLAN Trunk Ports               : 0
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled

Hi,
The ASA5505 has with Base License the limitation of 3 Vlan interface of which 1 is also limited in access (shown by the above output mentioning DMZ Restricted)
For an interface on the ASA to operate it must have a name with the command "nameif"
If you already have 3 Vlan interfaces in use then with this license you wont be able to configure 4th Vlan interface without getting a license that supports more interfaces. I guess that would be the Security Plus license.
I know that this has come as a surprise to several users that have posted here on the forums. I too think that its a needles "feature" in the ASA to limit the use of the device in such a way.
- Jouni

Licensing problems installing JDriver for MS SQL Server

I've been having problems for some time now creating a connection pool in WL 5.1 using the MS SQLServer4v70 JDriver. I am at wits end and haven't been able to find a solution or find anybody that could give me a solution. Below is a better description of the problem including exact error messages and configuration.
There's some simple problem here, but I'm not an
installation expert. Would you please post this to
the support.install group? If you don't get help
quickly from there, let me know.
JoeAt 09:54 AM 10/31/00 -0800, you wrote:
Here's the exact error message:
Tue Oct 31 09:52:09 PST 2000:<I> <WebLogicServer> IIOP subsystem enabled.
weblogic.common.LicenseNotFoundException: Could not find licensing file:
Your WebLogic license file, named either WebLogicLicense.xml or
WebLogicLicense.class must be located in a directory that is
in your CLASSPATH. By default, your license file is located in the
/license directory located in your WebLogic home directory
(the root directory of your WebLogic installation).
As of version 4.0 of WebLogic, a new XML-format license file has
replaced the older, compiled class format license file.
The WebLogic Server will recognize either format.
For additional information on WebLogic licenses or on setting your
classpath, see the i
stallation instructions in the WebLogic Server documentation, available at
http://e-docs.bea.com/
my weblogic class path looks like:
CLASSPATH Prefix c:\weblogic\mssqlserver4v70\classes
CLASSPATH
c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\lib\tools.jar;c:\jdk1.3\jre\li
b\rt.jar;c:\jdk1.3\jre\lib\i18n.jar;C:\weblogic\license;C:\weblogic\classes\
boot;C:\weblogic\cla
sses;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\eval\cloudscape\lib\cloudsc
ape.jar
JAVA_HOME c:\jdk1.3
WEBLOGIC_LICENSEDIR C:\weblogic\license
WEBLOGIC_HOME C:\weblogic
system properties:
java.security.manager
java.security.policy==C:\weblogic\weblogic.policy
weblogic.system.home=C:\weblogic
java.compiler=symcjit
weblogic.class.path=C:\weblogic\license;C:\weblogic\classes;C:\weblogic\myse
rver\serverclasses;C:\weblogic\lib\weblogicaux.jar
INITIAL_HEAP 64 MB
MAX_HEAP 64 MB
SERVERCLASSPATH
c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\jre\lib\rt.jar;c:\jdk1.3\jre\l
ib\i18n.jar;C:\weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudsc
ape.jar
Type "wlconfig -help" for program usage.
The license file is attached:
-Matt
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, October 31, 2000 8:41 AM
To: Matthew Heaton
Subject: RE: Problems creating connection pool
At 04:35 PM 10/30/00 -0800, you wrote:
Still having problems with it not finding the licenseOk, what is the exact failure message? Does the server start fine?
Then it's finding the server license in the weblogiclicense.xml file.
Is it then failing to find the driver license? If so, show me your
editted xml license file.
Joe
Currently nothing related to the driver is in my classpath and
c:\weblogic\mssqlserver4v70\classes is in my weblogic classpath. I deleted
the license folder for the driver after moving the guts of it into the main
weblogic license file.
-Matt
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, October 30, 2000 3:46 PM
To: Matthew Heaton
Subject: Re: Problems creating connection pool
Hi Matt.
You did the right thing adding the driver to the weblogic.class.path.
That's where it should be, not in the java.class.path. The current
licensing issue is that the weblogic server has(had?) it's own copy of
WebLogicLicense.xml, containing the server licenses. The one from thedriver
is now in the path. It contains the driver license, but not the server
stuff. Edit the server one, adding the guts of the driver one, and
delete the driver xml license file from your path.
Joe
Matt Heaton wrote:
This is a problem that has been a roadblock for me for a while, I'm usingWL 5.1 and trying to create a connection pool with the MS SQL server 4v70
JDriver.
Here is the code to create the connection pool:
weblogic.jdbc.connectionPool.SQLPool=\
url=jdbc:weblogic:mssqlserver4:MATTHEWH1:1433,\
driver=weblogic.jdbc.mssqlserver4.Driver,\
initialCapacity=1,\
maxCapacity=2,\
capacityIncrement=1,\
props=user=AceUser;password=AceUser;server=MATTHEWH1
I've addedc:\weblogic\mssqlserver4v70\classes;c:\weblogic\mssqlserver4v70\license to
my class path, but I was getting a class not found exception when Weblogic
tried to make the connection pool. I then added
c:\weblogicmssqlserver4v70\classes to my Weblogic classpath and got the
following error:
weblogic.common.LicenseNotFoundException: Could not find licensing file:
Your WebLogic license file, named either WebLogicLicense.xml or
WebLogicLicense.class must be located in a directory that is
in your CLASSPATH. By default, your license file is located in
the
/license directory located in your WebLogic home directory
(the root directory of your WebLogic installation).
As of version 4.0 of WebLogic, a new XML-format license file has
replaced the older, compiled class format license file.
The WebLogic Server will recognize either format.
For additional information on WebLogic licenses or on settingyour
classpath, see the in
stallation instructions in the WebLogic Server documentation, available
at
http://e-docs.bea.com/
So I tried adding c:\weblogic\mssqlserver4v70\license to the weblogicclasspath and got yet a different error:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : C:/weblogic/license/WebLogicLicense.xml
However Unable to start because :
No License found for WebLogic
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3
WebLogic Server terminated with an abnormal condition of 1
What do I do? I've tried everything I can think of, I was able to getthis to work the first time that I tried to do it but everytime I've tried
since then this happens.
-Matt--
PS: Folks: BEA WebLogic is in S.F. with both entry and advanced positions
for
people who want to work with Java and E-Commerce infrastructure products.
Send
resumes to [email protected]
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application
Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component
Architecture
http://www.bea.com/press/awards_weblogic.html
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application
Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component
Architecture
http://www.bea.com/press/awards_weblogic.html
Attachment Converted: "c:\eudora\attach\WebLogicLicense11.xml"
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component Architecture
http://www.bea.com/press/awards_weblogic.html

Eric Ma wrote:
Joe:
Connection is a LOCAL variable declared in each method. DataSource is an instance
variable.That sounds fine... let me see your code (main block plus finally block). How long does this
take to reproduce? Show me your pool definition.
thanks,
Joe
>
>
Eric
Joseph Weinstein <[email protected]> wrote:
Eric Ma wrote:
I was given the unfortunate task :-) of getting data out of M$FT SQL6.5. I set
up a JDBC connection pool using jDriver in mssqlserver4v65.jar, andcreated a
JDBCDataSource for the pool. I am using a stateless session bean +JDBC (with
the DAO pattern) to get data. In the DAO class I have an instancevariable for
the datasource, which I look up in the constructor. In the DAO's businessmethod
I RELIGIOUSLY call datasource.getConnect() first, and ALWAYS call connection.close()
in the finally block. Now the initial requests are fine, but aftera while I
got a weblogic.common.ResourceException telling me there were no moreconnection
available in the pool. Is this a jDriver bug? I never run into sucha problem
with an Oracle connection pool using the thin driver.
Any insight will be greatly appreciated.
Eric MaHi. Is the connection object an instance variable? That would be a problem.
The connection object has to be a method variable to be safe from multithreading
issues.
Joe

Licensing problem for adobe acrobat 9

I'm trying to load up Acrobat 9 pro from my CS5 package and i keep getting an error message that says the licensing for this product has stopped working. I've uninstalled and installed it again and i don't see anywhere to put in a serial number.
thanks
karen

i downloaded the LicenseRecovery111.dmg file but can't get it to work. I'm on a mac and many of the other means of correcting the problem are windows based. . . what other options are there?
thanks
karen

Moved iMac = Macbook - LICENSING PROBLEM

Hi,
I just switched from an iMac to a Macbook. Got the Macbook for college stuff and I'll be selling my iMac shortly. I transferred everything over to my Macbook via an external hard drive, following the instructions on screen. It transferred everything successfully; couldn't be happier.
So I pulled up Photoshop CS3 on my new Macbook. The error message displayed is The licensing has stopped working, with no error code provided. Weird thing is, the products still worked on my iMac. So, I proceeded with these steps:
Deactivated my licensing on my iMac
Uninstalled Adobe CS3 on my iMac
Restarted my Macbook, same error
Used Adobe's license repair tool and removed the licensing registry from my iMac
Restarted my Macbook, tried again, same error
Uninstalled CS3 from my Macbook
Reinstalled CS3 on my Macbook
Restarted my Macbook, tried again, same error
Used the license repair tool on my Macbook, removed the licensing registry from my Macbook
Uninstalled CS3 from my Macbook, re-installed everything
Restarted my Macbook, tried again, same error
I am absolutely out of ideas as to what to do. Please note that this was a computer TRANSFER, so I don't suspect is has anything to do with the weird CS3 network errors some people have had in the past. Both my iMac and Macbook have Snow Leopard on them.
Technical support recommended I read the knowledgebase. I did so, tried all of their fixes/solutions, and still haven't been able to get the product to work. It's like my Macbook has some "licensing signature" on it that I can't delete. I deleted the FLEXnet folder, Adobe PCD folder -- everything. Why is it still doing this?
Thanks in advanced. Any ideas?

Same story for me. I migrated from a G5 iMac running Leopard to a Intel MacBook Pro running Snow Leopard. Everything works except CS3. Photoshop Elements and Adobe Reader work but none of the CS3 elements work. Adobe Customer Service worked with me for 5 hours including waiting time. Technical Support now has the case. I have spent 3 hours working with them with no resolution in site. This is over a period of 11 days. It seems it would be easy to remove all registration files and do a clean reinstall. They don't seem to know how to do that. On problem I have is when they ask me to change the name of a file, even though I have read & write permission, the name won't change. I can remove files and folders, but there are some I can't change the name of.
Some things they had me try were Technote kb401528,
Error "Licensing for this product has stopped working" when you start any Adobe Creative Suite 3 application
http://kb2.adobe.com/cps/401/kb401528.html#MacOSX
and Technote cpsid_51260,
Launching Adobe products on Mac OS X 10.6 results in error "Licensing for this product has stopped working"
http://kb2.adobe.com/cps/512/cpsid_51260.html
Tech Support is now going over my installation log files, at least they had me send them to them. I never get any calls back. I alway have to call them and it takes over an hour to get someone to answer the phone.

Licenses problem

Similar Messages

Maybe you are looking for