Lightning to 30 pin adaptor giving no sound when connected to docking station

lightning to 30 pin adaptor giving no sound when connected to docking station

I am always amazed in these forums by the number of people who think they are helping by asking obvious questions about the problem with no clue what the real issue is or how to help.
That being said:
I had the same problem after upgrading.
Could boot your tablet, should fix the problem.
1. power off the unit.
2. Power on by holding the power button and volume up button at the same time.
3. using the volume up and down button as a right and left curser, selectt the Android icon and press the power button.
4. this will cold boot the system and the various dock functions should return.
Warning: Selecting anything else but the android icon will reset the device to factory defaults and wipeout all your info.

Similar Messages

  • X1 Carbon - No Sound When Connected to Docking Station

    Hi,
    Sound gets muted when connected to docking station/ HDMI.
    Please can you help me restore sound on X1 Carbon even when connected to docking station (inc. HDMI).
    Thanks,
    ME

    I am always amazed in these forums by the number of people who think they are helping by asking obvious questions about the problem with no clue what the real issue is or how to help.
    That being said:
    I had the same problem after upgrading.
    Could boot your tablet, should fix the problem.
    1. power off the unit.
    2. Power on by holding the power button and volume up button at the same time.
    3. using the volume up and down button as a right and left curser, selectt the Android icon and press the power button.
    4. this will cold boot the system and the various dock functions should return.
    Warning: Selecting anything else but the android icon will reset the device to factory defaults and wipeout all your info.

  • No sound when connected to docking station(s)

    I use my Thrive tablet connected to Bose computer speakers for pretty impressive stereo setup. This works fine when I am connected directly to the Thrive via the 3.5mm earphone jack, but when I use a docking station (either the Media one or the standard one with audio out), i get no audio. If I have speakers plugged directly into tablet (bypassing dock), still no sound...as soon as I unseat it from dock, I have sound again.
    Anyone seen this or can help me out?
    Thanks...love my Thrive!

    I am always amazed in these forums by the number of people who think they are helping by asking obvious questions about the problem with no clue what the real issue is or how to help.
    That being said:
    I had the same problem after upgrading.
    Could boot your tablet, should fix the problem.
    1. power off the unit.
    2. Power on by holding the power button and volume up button at the same time.
    3. using the volume up and down button as a right and left curser, selectt the Android icon and press the power button.
    4. this will cold boot the system and the various dock functions should return.
    Warning: Selecting anything else but the android icon will reset the device to factory defaults and wipeout all your info.

  • I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

    I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
    THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
    Help!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • Can iPod touch 5g connect to an audio amplifier via lightning to 30 pin adaptor and through a 30 pin to RCA cable adaptor

    Can the iPod touch 5g connect to an audio amplifier via lightning to 30 pin adaptor and through a 30 pin to RCA cable adaptor? It works on the latest iPod nano but it doesn't on iPhone 6. I have spoken to the apple reseller sales personnel but he has no clue.

    If it works on the 7G Nano and does not on the iPhone 6 I would not expect it to work on the 5G iPod..
    Just what adopter are you talking about? Can you provide a link?

  • Does the lightning to 30 pin adaptor work in speaker docks?

    My old 3rd Generation iPod stopped working (the round scrolling dial won't work), so I bought a new 7th generation iPod last week.  I realized I couldn't play it on my fairly low-end Memorex speaker dock, so I got one of those $30 lightning-to-30-pin adaptors.  The new iPod charges, but it won't play music in my speakers.  Is this a problem with my particular adaptor, or do those not work to play music?  I am hoping there is some kind of setting adjustment I can make...  Thanks!

    There are reports that 30-pin adapter does not work in all types of speaker docks. If it should, there should not have any trouble interfacing it with the ipod. If you are planning to get a new dock, check with the store first if it is compatible before you purchase it. Cheers!

  • Will a 30 pin to composite cable work with a lightning to 30 pin adaptor?

    Does anyone know is a 30 pin to composite cable work with a lightning to 30 pin adaptor?

    Hi - this article may help - http://www.imore.com/lightning-connector-drops-video-out-support-wants-you-use-a irplay-and-apple-tv

  • My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

    My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

    well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Squeeking sound when connecting but no display

    My ipod non 1G makes squeeking sound when connecting to my computer but no display and no functionality. When disconnecting from computer he is completely dead. Any idea which component is causing that so I can repair it?

    Yes it is.
    I've also tried putting it into different USB ports as well as 3.0 and 2.0.
    And im sure that the screen works because it works fine with my MacBook Pro, so im thinking that i need some sort of driver... Not sure though...

  • Iphone 3 only blank light screen after fall on floor...say sound when connecting to Itunes

    the Iphone is not broken, but it only shows a light blue/white screen. It gives a sound when connecting to Itunes. I have tried ti hardboot but no help. im now trying to recover trough Itunes but the screen is still light blue. it can be the graphic somehow??
    What to do?
    The Phone was falled out of my hands

    The phone is CERTAINLY broken.  It worked immediately before you dropped it, and stopped working right after.  What makes you think that your dropping the phone didn't break it?
    You have 3 choices:
    You can bring your phone to Apple and pay for an out of warranty exchange ($149 in the US)
    You can buy another phone
    You can find a 3rd party repair shop in your area and see if they can ifx it.

  • Lightning to 30 pin adaptor

    I have iPod nano 4th gen with 30-pin (female) connector. I also have Bose SoundDock Series III with (male) lightning connector. Where can I get an adaptor to connect them together and listen to music stored in my iPod through the Bose docking station ? I live in the UK and need to be able to buy on-line.

    Have you gone back and explained to them the error of their ways?
    I would include the manager of the Apple Store in that conversation.
    You might ask the genius to purchase the cable that he suggest back from you. To me that sounds like a fair deal.
    Allan

  • Just bought a Bluetooth headset second hand it comes with a transmitter that plugs into the iPhone but as my phone is a 5 will the Lightning to 30 pin adaptor work?

    II've just bought a second hand Bluetooth headset which comes with a separate transmitter that plugs into the base of the phone. However it has a 30 pin connection and as my iphone is 5 I need an adaptor,
    MY question is, will the Lightning to 30 pin Apple adaptor (£25.00), do the trick?

    Hi biggles83,
    Your iPhone 5 has Bluetooth available without using an external transmitter - see its specifications page -
    iPhone 5 - Technical Specifications
    http://support.apple.com/kb/SP655
    So you can set up the headset using the methods described on this page -
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Lightning to 30 pin connector not charging my nano from my dock

    Is it just me, or does the Apple Lightning to 30 pin connector not pass charge correctly?
    I bought a new iPod Nano a few weeks ago, not realising I would be getting one of the new Lightning connector ones, so when I ordered my iPad from Apple I also bought a Lightning to 30 pin connector so that I can properly use my JBL dock (which is quite old, bought it with my old 5th Gen iPod). Although it's great that it connects and allows me to control the iPod with the remote control and is a **** of a lot neater than dangling it by a cable from the headphone jack to the RCA input on the dock, I'm getting really frustrated by the fact that I'm not getting any charge being passed through to the iPod from the dock. This was one of the best things about having a dock, not only could I play my music with a good quality sound from the speakers, I could also play it all day long without worrying about the battery consumption as it was being charged at the same time. Now, if I've been using the iPod at the gym through the week, I find that I'm having to take the iPod off the dock and charge via a wall charger or my laptop - the latter allowing me to rever to the old way of hooking the iPod to the dock via headphone jack. It's really annoying that I've spent so much money on something that doesn't do everything I'd expected of it. I'm wondering if it's faulty or if it's the age of the dock - which I haven't used with an iPod for about 5 years!
    Has anyone else had this problem?

    Have you tried resetting the dock by removing it from power?  What about resetting the iPod Touch? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

Maybe you are looking for

  • Toshiba sattelite pro l40 stuck at splash screen

    i was resizing some partitions and when i restart, it freezes at lubuntu starting up, restart again? stuck at toshiba splash screen. if theres no battery and just ac, f2 says enterring setup but stays in splashscreen,with onlly battery f12 says enter

  • Selecting multiple image files on the 'insert picture' menu in word

    Hi there, I am trying to insert multiple pictures at once into a word document, on office for mac 2011. I am using the 'insert picture' option from the toolbar. Shift-click doesn't work like on a PC, and i have tried a variety of button combinations

  • PFCG_ORGFIELD_CREATE : post usage issues

    Hi, i used PFCG_ORGFIELD_CREATE to convert one field CO-OM Responsibility area  (RESPAREA) to Org Level. and yes field do show up in USORG table also. executed, it showed list of roles, which are effected now when i open roles to generate, it is show

  • Files for archiving

    I want to put my TestStand Project in a software archive. Therefor I have to know which files are neccesary to keep and which are automatically created so don't have to been archived. Is this described in a document?

  • Cannot print from InDesign v3.0.1 on Mac Pro

    I am attempting to print from InDesign v3.0.1 to a new Epson R3000 printer. Last week the connection and prints were fine. Now, when I select the "Print" dialog box, Indesign crashes.  Is there possibly a conflict between my older InDesign and runnin