Lightroom 5 can't copy files when importing PC catalog

Attempting to merge my old PC catalog into my newer Mac one.
I tidied up both catalogs, then consolidated the PC catalog and media onto an external USB 3 drive (NTFS) - Mac catalog is on an external Firewire drive (Mac OS Extended Journaled). Both separate catalogs were extensively tested and were working, with all media accessible.
I imported as catalog from the Mac catalog, and previews looked fine, and imported catalog looks fine EXCEPT almost none of the media has copied across (about 4500 photos worth!) some did, though, no idea why, or why not, in either case. Got an error message which said Lightroom couldn't copy some files.
I did so much manual cleanup, which took days, to make this painless, I'm pretty gutted such a simple thing didn't work.
Any idea what might be wrong and how to clean up this mess without having to go through it all manually AGAIN, please?

OK, I'll try to give you the info you need. Firstly, I'm not the one doing the copying, I'm asking Lightroom to copy files to a new location while performing an 'import from catalog'. Also, I've just undone the previous import and I was incorrect, Lightroom copied none of the files across at all. This is all being done on the Mac, just so you know.
Exact steps were as follows -
1 - File -> Import from another Catalog (choose PC Catalog on NTFS HDD).
2 - Appropriate files (all of them in fact) selected.
3 - Settings were- File Handling - copy to: (folder on the Mac external HDD). Replace: Nothing (only new files copied). With preview.
2 - Exact error message is "Problem importing from catalog 'Lightroom was unable to copy the files for these images to the folder you selected'." The previews appear in the catalog but with the missing file icons.
I've removed the previous import and tried again, with the same result. In between the tries, I checked read/write permissions on both drives, which have full access, and also tried manually copying one of the folders across between the same two HDDs using the Finder (i.e. outside Lightroom), which worked perfectly, so I can't agree it's not a Lightroom issue at the moment.

Similar Messages

Lightroom can't copy files

I'm using an external drive (also my Time Machine drive) for storing my image files. There's plenty of room, and I never had any trouble before, but all of a sudden LIghtroom won't copy files to that location. I even upgraded to Lightroom 2 and it does the same thing. It goes through the import process, and then at the end says it could not copy one or more of the files, and it is always all of them.
Any suggestions?
Thank you,
Charlie

I can read and write to this drive fine outside of Lightroom (and I use it as a TIme Machine backup, which I did before the problem started) and it has plenty of room on it, so I do not think that's the answer.
Thank you, though.
Charlie

How can I rename files when importing?

Is there a way to rename files when importing them? Every method I've tried retains the original file name the camera assigns (e.g. DSC_0001). I'd like the ability to rename the files automatically either with a date or event name with sequential numbering following.
Thanks!

First you will have to upload from the camera to a folder on the Desktop where you can batch rename them before importing into iPhoto. That's a safer workflow IMO because you can make sure the photos are safely on the hard drive before starting any other operation.
OT

ITunes not displaying 'copying files' when importing songs

When importing a large number of MP3 files, say an albums worth, iTunes refuses to display the 'copying files' progress bar at the top of the window. It is a process of trial and error clicking on the arrow to get the right progress bar to display, when and if I manage to get the appropriate progress bar up it will not stay for longer than a few milliseconds. Is this something I can fix or yet another sloppy bug in iTunes 7?

Hi,
Welcome to the group. I'm not sure why hitting the arrow next to the box isn't working as mine always works. I have the latest version and haven't had a problem yet.
Not sure if this will help but here is a link you can check out:
http://docs.info.apple.com/article.html?artnum=304706
Maybe someone else will have a solution.
S.

Can Lightroom render 1:1 Previews when importing my Photos?

Q: Can Lightroom render 1:1 Previews when importing my Photos?
FAQ revised 25 April 2009
Ans: Prior to version 1.3 Lightroom did not support 1:1 preview rendering during import, the actual options for Initial Previews being: Embedded or Standard. However, more recent versions allow four types of previews to be rendered during import (i.e. Minimal, Embedded & Sidecar, Standard,and 1:1). It's also worth noting the following on Lightroom import behaviour:
1. Minimal (Lightroom default) or Embedded & Sidecar is by far the quickest method for getting your photos into the Lightroom catalog. However, the lack of Standard, which is the minimum that Lightroom can actually work with, means that the application will render standard-sized on demand (i.e. as thumbs/photos become visible within the photo Content area). Asking Lightroom to undertake this task at the same time as you're trying to use the application will result in sub optimal performance.
2. Importing your photos with the Standard preview selected within the Import dialog will take longer than 1 above, but on completion Lightroom will already have previews that match the minimum requirement for working in the Library. Assuming that you won't be looking at every image at 100% (i.e 1:1) then this preview size will allow you to quickly review, rate, label, even make quick colour/tone adjustments, etc the photos within the Library module. If you need to see a photo at 100% then Lightroom will render that preview on demand (while it's being rendered you'll see the "Rendering Preview" overlay appear at bottom of preview). Note that when using a 23" or larger monitor it to is best to set the Standard sized previews so that they are rendered at 2048 pixels
3. Importing your photos with the 1:1 preview size selected will result in Lightroom taking even longer to complete the import process than would have been the case if standard-sized had been chosen. 1:1 previews also take up significantly more disk space than standard-sized.
If you're not going to be working on the photos immediately after import but do need to get them into Lightroom as quickly as possible, then the best option would be to choose import option 1. Once the photos have been imported choose either Render Standard-sized Previews or Render 1:1 previews from Library module Library>Previews menu.

When I search these forums for "CFCopyFormattingDescription", I find a bunch of crash reports posted that look almost exactly the same as mine. It appears there's a bug in iPhoto, perhaps when reading metadata from the JPG file (readRawTiffPropsFromPath).
Interestingly, the Preview app can open and display the file just fine. I even opened the inspector and it showed all of the TIFF and exif metadata just fine, no crash. The file also opens just fine on Windows.
Now how do we get the attention of the iPhoto development team so I can send them the photos, have them reproduce the crash, and fix it?

HT1451 I am trying to restore my playlists that disappeared yesterday. I have followed these instructions but when I get to step 7, I can't find File Library Import playlist. What am I missing?

I am trying to restore my playlists that disappeared yesterday. I have followed the instrutions on the support page but when I get to step 7, I can't find File>Library>Import Playlists. What am I missing?

I suspect the menus have changeed slightly since that document was written...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

When I connect to our server using smb:// can't copy files or edit names on server?

When I connect to our server using smb:// can't copy files or edit names on server?

Why not? What happens?
Do you get an error message? What does it say?

Photos copies photos when importing even when told not to copy photos when importing?

The new Photos app is pretty cool.
The one thing I didn't like about iPhotos is still present here: Rather than handling my photos in the Finder it creates a weird database full of all the photos -- and the only way to get to them is via this one app. I guess maybe we'll have a solution for that in the future.
But I have stumbled across something that may be a deal breaker for me: Even when set to not COPY imported photos, it turns out the Photos copies imported photos.
In preferences: GENERAL -> IMPORTING you can choose whether to Copy Items To The Photo Library.
Well, I don't want to do that. I have 8G of photos on my drive, and relatively little space, and the last thing I need to do is use double the space! So I chose not to copy items when importing.
I come back a couple hours later. And guess what? My Photos app/library is 8G in size! Photos has copied all my photos when importing. So now I have two copies of all my photos on my hard drive, and I am running out of space.
Is there a way to make that setting, to not copy photos when importing, work?

Hi,
Thanks for the idea. Here is what I found:
The "Masters" folder is very small. 300MB.
The "Previews" folder is a similar size.
"Thumbnails" are under 1G.
It's the "Resources" folder that is many gigs in size.
Very interesting. So in a sense, it could be even worse!
That is, apparently the setting prevented the "Masters" folder from getting 8 gig of photos copied into it.
But even so, "Resources" ended up with 6.5G in it -- even though no files were copied!
Wild.
Other photo management apps (e.g., Lightroom) have sort of a 10% overhead, not a 90% overhead -- i.e., close to the same size as the actual photos themselves.
I should probably start a fresh question, now that you have solved half the mystery: Yes, the actual photos were not imported into Masters, but Resources gets really big!

"Copy files on import" checked and greyed out in elements organizer 12

Elements organizer 12. Importing from hard-disk. Want to import without copying files, but the box "copy files on import" is checked and greyed out.
Remains so even when selecting a fresh jpg file. (Import with copying is not a good option: eventually more than 50.000 pictures and videos are to be imported -
I would have to delete my main media file structure in favor of adobes internal storage. Major hassle right at the start of using adobe's software..).
What can I do ?
(I found the same question several times on the internet, but no useable answer).

If you are also using iPhoto; Elements will make copies to your hard drive to prevent corruption of the photo Library. The choice is Organizer or iPhoto to manage your images or you can use iPhoto together with the Elements Editor; in which case you need to set Elements as your external editor within the iPhoto settings.

Can't copy file from SAP-directory to FTP server

Hello,
I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
I can see and read the file with transaction al11, so I know it's there.
But the FTP command always gives the same error:
S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
Any ideas?
Thanks in advance.
Dave

Ok, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
What can I do?
Thanks.

Can't copy files from mounted DMG. What's up??

So all of a sudden, I can't copy files from mounted DMG files. It's strange because if there is one file and I drag it to another location, like desktop, it won't copy. If I drag 2 files from the mounted DMG to the desktop one of them copies. If I drag 3, then 2 copy... it's always all but one of the files... never all of them.
I've tried repairing permissions but nothing works. I'm at a loss...
thanks
D
iMac Core Duo 17", 1.5 gig RAM Mac OS X (10.4.8)

Try holding option when you drag the files. This tells the mac to move the files to the desktop of your computer not the desktop folder of the DMG (usually a hidden folder)
If that doesn't work it may be that you need administrative privileges to move the files. Make sure you are logged on as as an administrator by selecting the account tab in system preferences and making sure it says "admin" under your user name. Log on to or create an administration account then try moving the file.
Hope this helps, let me know
Thom

Can't copy file to network drive as "The operation can't be completed because the [Filename] is in use

Following upgrade to Yosemite I now can't copy files from iMac to my network HDD in external media center. I have iMac connected by wi-fi to airport extreme and media center connected to airport extreme by cable. I can see the HDD as a network drive on my iMac and can initiate the copy but right when copy process is finished I see "The operation can’t be completed because the [Filename] is in use". I am trying to copy different media files downloaded from internet which are not used by any program and stored on my hard drive. I actually can copy small files of 1mb and it works but anything above 20mb is halted. I can also move/copy/delete the file on iMac. Cant understand the nature of the problem. I tried to format external HDD as EXT2/EXT3/NTFS but same outcome.
OS X Yosemite 10.10.3 | iMac late 2009 | Apple Airport Extreme | Dune HD Base 3D mediacenter

Have you tried a restart or logging out/in?
Some more ideas.
Re: The operation can’t be completed because the item “ " is in use.

How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

Hi,
I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
I am almost lost to find the operating tools.
1. How can I copy files from hard drive to computer and vis-a-versa?
2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
3. No right click works on track pad?
4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
I will very much appreciate if you could email me the with the solution/answers please.
Regards,
Khagendra Limbu

1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

Can't copy files to server - multiple instances of same user in getinfo

I can't copy files from one of my desktop computers to a server that I administer, via AFP. When I try to do so, I get the following sequence of messages:
1. "You may need to enter the name and password for an administrator on this computer to change the item named [file]"
2. "The item [file] contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
3. "The operation cannot be completed because you do not have sufficient privileges for some of the items."
BEFORE I attempt to copy any given file to the server, Getinfo shows that I have read and write access; unknown has read-only access, and everyone has read only access.
AFTER I attempt and fail to copy the file, another instance of "Me" appears in the Getinfo, with Custom privileges. The other users and permissions remain as above. Even after I unlock the file, I am not allowed to edit permissions for any of the users.
I have repaired permissions on the client. This issue has persisted through 10.5.2 and the 10.5.3 upgrade.
I can successfully copy to the server from another one of my computers. It's just this one client machine that's giving me trouble.
What gives???

It looks like a configuration problem with our servers/network. We have tried several new laptops with 10.6 in different parts of the company, with different network switches and locations, and get the same result. Anything with 10.5 or older has no problem. I broke the raid1 apart on my Mac Pro and installed 10.5 on the second drive, and have no problems now.

Can't copy files to network share using migrated account

Man this is so bizarre. I got a new MacBook Pro and used the Migration Assistant to copy over everything from the old MacBook Pro. Everything seems to work except I can't copy files to my desktop via a network share.
What's totally bizarre about this is that I can delete and rename files from the network share! I can also drop into the command line and try copying - at first, I get "Operation not permitted", but if execute the command again, it works!
In the Finder, when I try to copy a file, I get a window that says:
"You may need to enter the name and password for an administrator on this computer to change the item named "xxx". If I click stop at this point, a zero-byte file is created on the target machine.
If I click Continue, I get another window that says "The item "xxx" contains one or more items you do not have permissions to read. Do you want to copy the items you are allowed to read?
If I click Continue, I get a final window that says "The operation cannot be completed because you do not have sufficient privileges for some of the items".
Note that this also happens in the opposite direction when I connect to my notebook from my desktop.
Also note that this only happens with the account that was migrated. I can successfully copy files if I setup a new account.
I've repaired permission on both machines. My old account on the old MacBook Pro still works fine, btw.
I've seen other posts with people having this problem, but I've yet to see a good solution.

I had the same problem, but I managed to fix it.
In WGM check that the sharepoint of your users Home Folder is set to owner root with Read and Write permissions.
I also created an ard_admin group in WGM and enabled open directory management on the client Macs. (Page 62 of the ARD admin Guide.)

Lightroom 5 can't copy files when importing PC catalog

Similar Messages

Maybe you are looking for