Lightroom 5 displays No Photos in Selected Folder for all folders.

All of a sudden Lightroom stopped displaying all of the installed photos. The catalog folders display the correct number of photos, but every folder in the catalog displays the same message —  No Photos in Selected Folder. The photos are all in the correct folders on the hard drives — but they don't even show up as not found — just non-existent. When I hover over a folder an image apperars in the Navigator, but nothing show in the Grid or Loupe view.
I tried a Sync, and the import dialog came up, saying there were no photos to import. If I go to Import and navigate to photos that have not been imported they appear, but if I go to a folder that contains previously imported photos Lightroom says No Photos Found. The photos themselves are not damaged and will open in Photoshop with no problem. The only change made recently is an upgrade to Maverick on my MacBook Pro Retina laptop.
Any thoughts will be much appreciated.

I have had this occur twice, the last time today, after I upgraded to Mac OS 10.9. I have no idea why it happens, but it is very scary to see that there are no photos. I have fixed it both times by (a) rebuilding my catalog and (b) quitting and relaunching Lightroom. I don't know if (a) is necessary, or if relaunching is sufficient. I also have had Lightroom twice "lock" the display, where the same set of photos is displayed, regardless of which folder is selected in the left-hand panel. This is just as scary, and sometimes you don't notice, so you are editing a random photo (the photo that should be displayed, not the one that is incorrectly displayed). I'm using lightroom 5.2

Similar Messages

  • "No photos in selected Folder" message - but there ARE photos in the selected folder.

    LR is not recognizing the photos in the folders.  I click on the question marks to locate the files, select the folder/photos on the external hard drive, and all the previews disapper in LR and it gives me the "no photos in selected folder" error message.  I'm on LR4, Mac.  How do I fix this?

    Thanks for the helpful suggestion John.  The selection you mentioned was indeed enabled -- hence the confusion that no images were visible.
    After some sleuthing, I figured out that there was a Library Filter (i.e. "Text|Attribute|Metadata|None") in effect for the parent folder and no photos matched the filter criteria. I did not notice that a filter was in effect since the the filter bar was not visible (Keystroke "\" to toggle it).
    Perhaps this might suggest a feature request -- Provide a visual cue or warning that filters are in effect.
    Come to think of it, if the text had simpy read "No photos match search criteria." rather than "No photos in selected Folder" it would have been clear what was going on.
    I wonder if other folks have been bitten by this?

  • How to get One Selection Screen for all queries?

    Hi Experts,
    I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
    I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
    Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
    I think there should be some way of getting it done.
    Waiting for your inputs,
    With kind regards,
    Shreeem

    Hi
    If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
    Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
    http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
    Hope this helps,
    Aparna Duvvuri

  • Regarding Select using FOR ALL ENTRIES (FAEI)

    Hi all,
    Please help me with Select using FOR ALL ENTRIES (FAEI)
    Thanks in advns,
    Das.

    Hi,
    This version of the SELECT statement was the only way to join tables until SAP release 3.0E.  It is recommended that the SQL JOIN be used.  However, this is an alternate method of joining tables that may be used in some circumstances.  Remember, SQL JOIN doesn’t utilize the SAP internal database buffer.
    Example:
        SELECT EKGRP FROM T024
               INTO TABLE T_024.
        SELECT MATNR WERKS EKGRP FROM MARC
               INTO TABLE T_MARC
               FOR ALL ENTRIES IN T_024
               WHERE EKGRP = T_024-EKGRP.
    Prerequisites:
    The driver table cannot be empty. This would cause one full table scan.
    In general, keep the driver table as small and unique (in regards to the fields that would be needed for referencing in the FAEI) as possible. If duplicate entries are not deleted, identical data is read unnecessarily from the database.
    If FAEI is used, the selected field list must be a superset of all the key fields of the database tables used in SQL. This is absolutely required to avoid data loss since the DB interface in R/3 returns unique sets of the result set to the application program. Failing to ensure this may cause problems when you want to get all records from a database table that match a certain condition.
    Avoid using FAEI on a small DB table (like configuration tables). This could potentially cause full table scans for each FAEI packet. Even if it does index range scan, it is better to get data from the small DB tables by individual SELECT without the use of FAE.
    Always use FAEI in conjunction with a DB index otherwise it would cause multiple full table scans (one table scan for each FAEI packet).
    The first field(s) of the DB index should refer to the fields of the FAEI driver table in the SQL WHERE clause. Do not leave gaps between index fields in the WHERE clause. Inefficient index access will impact every FAEI packets.
    FAEI works best when retrieving a small percentage of data from a Database table. When a large percentage of data is needed, consider getting data out of the DB table without FAEI implementation, and then do additional filtration in your application
    Reward points if found helpfull...
    Cheers,
    Chandra Sekhar.

  • Help fix my function to show status for all folders

    I have created a function (tow of them for the same purpose) but they are not working. They compile but when i call them I get null result.
    What I want to do is get folder status for all folders in the database. There is a table called folder with status code, and another table called validstatus with the statuscode description
    So when you look at the older you just see the status code which is a number but then using the function you will get the desription of what that code means.
    Here IS THE function. Maybe I am not doing it right when I call them.
    CREATE OR REPLACE FUNCTION f_folderstatus (v_folderrsn IN NUMBER)
    RETURN VARCHAR2
    IS
    v_return VARCHAR2 (128);
    BEGIN
    SELECT distinct vs.statusdesc
    into v_return
    FROM folder f, validstatus vs
    WHERE f.statuscode = vs.statuscode
    AND f.folderrsn = v_folderrsn;
    RETURN v_return;
    END;
    When I call them using this statement I get null
    select f.folderrsn, f_folderstatus3(vs.statusdesc)
    from FOLDER F, validstatus vs
    where f.statuscode = vs.statuscode
    Edited by: user9508421 on Sep 11, 2008 8:11 AM

    Now how do I create a function to give folder status for all foldertypes? I will then use this function in a package.
    The Folder table has the following columns:
    NAME Null? Type
    FOLDERRSN NOT NULL NUMBER(10,0)
    FOLDERTYPE NOT NULL VARCHAR2(4)
    STATUSCODE NUMBER(10,0)
    SUBCODE NUMBER(10,0)
    FOLDERDESCRIPTION VARCHAR2(4000)
    FOLDERCONDITION VARCHAR2(4000)
    FOLDERNAME VARCHAR2(80)
    The validstatus table has these columns:
    NAME Null? Type
    STATUSCODE NUMBER(10,0)
    STATUSDESC VARCHAR2(80)

  • Hide side bar for all folders

    How am i supposed to do to hide all side bar for all folders once for all plz ??

    May be a corrupt .plist.
    Do a backup.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.finder.plist.  Move the .plist to your desktop.
    Re-launch Finder by restarting the computer and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got it  from, overwriting the newer one.
    Thanks to leonie for some information contained in this. 

  • How can I set a customized view in finder set as standard for ALL folders?

    As I have a large number of folders, I need a specific view in finder: symbol view, sort by program and name. I tried to use this settings as standard for ALL folders, but using the 'set as standard' button does only work for the folder I am in, but not for ALL folders. I even tried to use this settings on the hard disk level in finder, but what ever I tried, it never applies to all folders. The problem occurs on each of my devices and on Yosemite OS 10.10.1. as well as Mavericks 10.9.5. Any ideas on how I can make the 'standard' work on all folders?

    As Vinod says, unique key validator would be fine.
    However, In Gabriel's blog:
    Performing a unique key validation for an attribute that is declared to be unique in the database requires a round trip to the database. This is quite expensive and there is a fast and easy way to work around it.Is false on several fronts:
    1). it's not expensive - it's actually cheaper than the alternative
    2). Unique key validator can require many trips to the DB to validate - it must check all other rows in the EO to ensure there is no duplicate, and all of those rows must be fetched into the middle tier to do the validation: this is expensive.
    The "cheapest" way to do this: unique constraint in the DB
    John

  • Setting a default folder view for all folders in Windows 7

    How do you set up a default folder view of "List" for ALL the folders in Windows 7 including the optical drive?  
    Artoo

    I just installed windows 7. Are you seriously telling me that i now have all folders with mp3s in them AUTOMAGICALLY (THANKS FOR THE HANDY HELPING HAND THERE MICROSOFT!!!) set to some designers whim of what an mp3 folder "SHOULD" look like?
    Well i was going to write a big rant, and indeed did, but then i was doing some more research and it seems like i just made everyones day and solved the problem (partially). Or well THIS guy did:
    http://www.howtogeek.com/howto/16694/customize-the-five-windows-folder-templates/
    After you’ve clicked OK, visit some of the other folders in your file system.  You should see that most have taken on these new settings.
    What we’ve just done, in effect, is we have customized the General Items template.  This is one of five templates that Windows Explorer uses to display folder contents.  The five templates are called (in Windows 7):
    General Items
    Documents
    Pictures
    Music
    Videos
    When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents.  If it is not obvious that the folder contents falls into any of the last four templates,
    then Windows Explorer chooses the General Items template.  That’s why most of the folders in your file system are shown using the General Items
    template.
    Changing the Other Four Templates
    If you want to adjust the other four templates, the process is very similar to what we’ve just done.  If you wanted to change the “Music” template, for example, the steps would be as follows:
    Select a folder that contains music items
    Apply the existing Music template to the folder (even if it doesn’t look like you want it to)
    Customize the folder to your personal preferences
    Apply the new template to all “Music” folders
    A fifth step would be:  When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder.
    Anyways, sorry that explanation doesnt do it justice. I have spent waaay too much time trying to figure this out already. Also that link doesnt say how to 1) copy templates (are they file or registry based?, didnt do research) 2) if you can distable templates
    or the automatic re-templating of folders.
    THAT is what i want to know! as it is much more maintance then its actually worth...
    but once i had set 5 default types to, the exact same thing... it now doesnt matter if it automagically switches it. SUCK IT MS AUTOTUNE!!!
    Its bloody hard to frame this question too. What can you say about this? "folder changes to mp3" "customize folder types windows 7" "windows 7 folder changes to mp3" "dont automatically change folders to mp3" "how
    to change mp3 details column for good" "automatically change column order win 7 mp3"
    The search that actually solved it:
    "do not apply default template to mp3 windows 7"
    good luck, this worked for me!
    EDIT: also i just noticed that neonr already answered this above. i just didnt read it carefully enough. anyways i guess i will leave this and mark his as answer.

  • Photo management, once and for all...help!

    This will be an eye-roller for some of you, but my thousands of photos have become a jungle and I don't understand how to manage them.
    -iPhoto
    -photo stream
    -camera uploads
    Where is "ground zero" for all of my photos - is there one? -  and how can I wrangle them all into one place for easy management? I delete a photo from one place, only to find it again in some other place (or two). 
    Also, if I delete photos from iPhoto on my MacBook Air (I'm out of disk space...again....), does it automatically delete them from iPhoto on my iMac too?
    I think I literally need someone to draw me a picture of how photo storage works on Mac products.
    Thank you.....
    C

    iPhoto is a database program that keeps everything in a database - by default the iPhoto library in your pictures folder on your hard drive
    Assuming you have a default managed library then it has no connection of any sort to anything outside of your Mac - not the cloud - not any other Mac - nothing
    Once photos are imported into the iphoto database (viewed in an event or in Photos view) nothing else affects them
    Nothing you do "automatically" deletes photos form iphoto events
    MyPhotoStream is not a place to store photos but a stream to move photos between devices - they can be automatically imported into iPhoto (see the iPhoto preferences ==> iCloud) to become part of your library - if they are not then they are transient and only available for 30 days max
    By default camera uploads go into the iphoto library that you upload them into
    If you have specific questions please post them
    LN

  • Incoming virtual folder for all email account

    How can I make an incoming folder in mail.app like it is on mac: a virtual folder where all incoming messages from all accounts are displayed?
    I have several email accounts and it's very uncomfortable to dig into one account, then back to root^ than to another...

    You can't - this is up to Apple to provide a "blended" Inbox mailbox for all accounts and the same for the Drafts, Sent, and Trash mailboxes for all accounts as is available with the Mail.app on a Mac.
    You can provide Apple your feedback here.
    http://www.apple.com/feedback/iphone.html

  • Creating Folder for Existing Folders

    Is it possible to create a new folder for AR for iOS so that you can move already existing folders into it? My folders have become a bit cluttered as I had to create more for specific files, but they should all be filed under another bigger folder. Thanks!

    Question: "Is it possible to create a new folder for AR for iOS so that you can move already existing folders into it?"
    Answer: (Assuming that you are referring to the PDF documents and folders that you access inside Adobe Reader for iOS) Yes, you can create nested folders using the file browser user interface in Adobe Reader for iOS,
    In the main screen (showing Documents, Acrobat.com, Camera to PDF, My Account, Help), you can create a new folder.
    Tap Documents.
    Tap Edit in the upper right corner.
    Tap the folder icon with a plus sign in the bottom toolbar.
    Enter a new folder name.
    You can navigate to an existing folder and repeat the steps above to create nested folders in Reader.  You can select multiple files and move them to the newly created nested folder as well.  But it's not possible to move a folder containing files to a different folder at once.
    See Help > Handbook > Copy, edit, delete, manage for more details.
    If you use Acrobat.com as a cloud storage service, you can create nested folders using the web browser interface (https://files.acrobat.com/), organize your files and folders, and access them in Adobe Reader for iOS.
    Hope this helps.

  • Performance Issue in Select Statement (For All Entries)

    Hello,
    I have a report where i have two select statement
    First Select Statement:
    Select A B C P Q R
         from T1 into Table it_t1
              where ....
    Internal Table it_t1 is populated with 359801 entries through this select statement.
    Second Select Statement:
    Select A B C X Y Z
         from T2 in it_t2 For All Entries in it_t1
              where A eq it_t1-A
                 and B eq it_t1-B
                 and C eq it_t1-C
    Now Table T2 contains more than 10 lac records and at the end of select statement it_t2 is populated with 844003 but it takes a lot of time (15 -20 min) to execute second select statement.
    Can this code be optimized?
    Also i have created respective indexes on table T1 and T2 for the fields in Where Condition.
    Regards,

    If you have completed all the steps mentioned by others, in the above thread, and still you are facing issues then,.....
    Use a Select within Select.
    First Select Statement:
    Select A B C P Q R package size 5000
         from T1 into Table it_t1
              where ....
    Second Select Statement:
    Select A B C X Y Z
         from T2 in it_t2 For All Entries in it_t1
              where A eq it_t1-A
                 and B eq it_t1-B
                 and C eq it_t1-C
    do processing........
    endselect
    This way, while using for all entries on T2, your it_t1, will have limited number of entries and thus the 2nd select will be faster.
    Thanks,
    Juwin

  • Performance optimization on select query for all entries

    Hi All,
          I want to optimize the select query in my Program.
         The select query is taking lot of time to search the records for the given condition in the where clause
         and more interestingly there are no records fetched from the database as the where condition does not matches. 
         It is taking more than 30 min to search the record and the result is no record found.
         Below is my select query. I have also created the secondary Index for the same.
         In My opinion FOR ALL ENTRIES is taking lot of time. Because there are more than 1200 records in internal table t_ajot     
          select banfn  bnfpo     bsart      txz01   matnr   Werks   lgort     matkl    reswk   menge     meins   flief      ekorg  
              INTO CORRESPONDING FIELDS OF TABLE t_req
              FROM eban
                FOR ALL ENTRIES IN t_ajot
              WHERE matkl >= t_ajot-matkl_low
                AND matkl <= t_ajot-matkl_high
                AND werks = t_ajot-werks
                AND loekz = ' '
                AND badat IN s_badat
                AND bsart = 'NB'.  
        Please suggest.

    Hi,
    that,
    FOR ALL ENTRIES IN t_ajot
    WHERE matkl >= t_ajot-matkl_low
    AND matkl <= t_ajot-matkl_high
    AND werks = t_ajot-werks
    AND loekz = ' '
    AND badat IN s_badat
    AND bsart = 'NB'.
    looks strange.
    However:
    How does your index look like?
    What executoin plan do you get?
    How do the statistics look like?
    Whats the content of the variables t_ajot-... and s_badata?
    Kind regards,
    Hermann

  • How to write select query for all the user tables in database

    Can any one tell me how to select the columns from all the user tables in a database
    Here I had 3columns as input...
    1.phone no
    2.memberid
    3.sub no.
    I have to select call time,record,agn from all the tables in a database...all database tables have the same column names but some may have additional columns..
    Eg: select call time, record,agn from ah_t_table where phone no= 6186759765,memberid=j34563298
    Query has to execute not only for this table but for all user tables in the database..all tables will start with ah_t
    I am trying for this query since 30days...
    Help me please....any kind of help is appreciated.....

    Hi,
    user13113704 wrote:
    ... i need to include the symbol (') for the numbers(values) to get selected..
    eg: phone no= '6284056879'To include a single-quote in a string literal, use 2 or them in a row, as shown below.
    Starting in Oracle 10, you can also use Q-notation:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements003.htm#i42617
    ...and also can you tell me how to execute the output of this script. What front end are you using? If it's SQL*Plus, then you can SPOOL the query to a file, and then execute that file, like this:
    -- Suppress SQL*Plus features that interfere with raw output
    SET     FEEDBACK     OFF
    SET     PAGESIZE     0
    -- Run preliminary query to generate main query
    SPOOL     c:\my_sql_dir\all_ah_t.sql
    SELECT       'select call time, record, agn from '
    ||       owner
    ||       '.'
    ||       table_name
    ||       ' where phone_no = ''6186759765'' and memberid = j34563298'
    ||       CASE
               WHEN ROW_NUMBER () OVER ( ORDER BY  owner          DESC
                              ,        table_name      DESC
                              ) = 1
               THEN  ';'
               ELSE  ' UNION ALL'
           END     AS txt
    FROM       all_tables
    WHERE       SUBSTR (table_name, 1, 4)     = 'AH_T'
    ORDER BY  owner
    ,       table_name
    SPOOL     OFF
    -- Restore SQL*Plus features that interfere with raw output (if desired)
    SET     FEEDBACK     ON
    SET     PAGESIZE     50
    -- Run main query:
    @c:\my_sql_dir\all_ah_t.sql
    so that i form a temporary view for this script as a table(or store the result in a temp table) and my problem will be solved..Sorry, I don't understand. What is a "temporary view"?

  • Select query 'for all entries'

    Hello Friends,
           SELECT emp_id emp_name
           INTO corresponding fields of table itab_emp
           FROM employee
           for all entries in itab_dept
           WHERE emp_id = itab_dept_emp_id.
    In the above select query we are using 'for all entries' for the internal table itab_dept.What will happen if the join fails?Will we get any data in the output table?
    What is the prerequisites for using 'for all entries'.
    Please advice me on this.
    Regards
    Ashish.

    Hi
    In this case all the records available in employee table are extracted into internal table itab_emp.
    It is safe to check whether itab_dept is initial or not.
    If it is initial then stop the select query.
    Check the following program u will get an idea.
    Also try this program by removing comment to 'REFRESH IT_LFA1'.
    REPORT  ZBM_PG                                  .
    TABLES: LFA1, EKKO.
    DATA:
         IT_LFA1 TYPE TABLE OF LFA1 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 10,
          IT_LFA1 TYPE TABLE OF LFA1 WITH HEADER LINE,
          IT_EKKO TYPE TABLE OF EKKO WITH HEADER LINE.
    SELECT * FROM LFA1 INTO TABLE IT_LFA1 WHERE LIFNR EQ '0000001000' OR LIFNR EQ '0000001500'.
    SELECT * FROM LFA1 INTO TABLE IT_LFA1 UP TO 1 ROWS.
    refresh it_lfa1.
    SELECT * FROM EKKO INTO TABLE IT_EKKO FOR ALL ENTRIES IN IT_LFA1 WHERE LIFNR = IT_LFA1-LIFNR.
    LOOP AT IT_EKKO.
      WRITE: / IT_EKKO-LIFNR, IT_EKKO-EBELN.
    ENDLOOP.
    Reward me if it is useful

Maybe you are looking for

  • Rebares

    hi friends In rebates, the rebate amount is not appear in order level, it appears in billing level and hit in G/L accounts. Right now I need the rebate amount not show in customer report? regards

  • Mac pro gray scrren

    I have been having previous problems with my mac pro 12 core 64 gb. Like boot loops and gray screens. my problem now is all three of my screens are gray and a spining circul no mouse on screen

  • I cannot use the Camera Raw feature

    I cannot use the Camera Raw feature after updating the CC!!!

  • Need help with transparency and color quality in the forground

    I need to make an image that is comprised of a collage in the back with a clear visible logo on top. I'm not sure if I'll need to change the hue's of the background collage images to create the image or if theres a way to make the image somewhat see

  • SELECT top two longest running steps from a log file

    Simplified example. Our jobs write records to our own internal log file. I want to write a query that will pull log records for a specific job, between specific dates. This will help determine if the job is running slower than usual and to find the s