Lightroom 5 sizing issue

Grrrr, up until about a week ago, lightroom 5 was exporting 23mb raw files as 18/19 mb jpeps. Then all of a sudden the same 18mb jpeg is now exporting as a 6.4mb jpeg! I cant work out what has happened. File settings remain unchanged at quality 100, sRGB, image sizing resize to fit is unclicked and resolution 300. Help help help!

Photogeek wrote:
It maybe absolute speculation, but previous imports and exports would justify the statement. I appreciate something has been done by myself somewhere, but I cant work it out. I uninstalled and reinstalled lightroom 5 today and its still exporting significantly smaller jpegs that it was before....again a justified statement beased on previous experience.
Possiblity #1
Uninstalling and reinstalling LR retains the old 'Preferences' file, which may be corrupted! Follow the procedure below to force LR to create a new Preferences file:
http://members.lightroomqueen.com/index.php/Knowledgebase/Article/View/1148/198/how-do-i-d elete-the-lightroom-preferences-file
Photogeek wrote:
If you imported a 25.2mb raw image, what export size of a jpeg would you normally expect?
Possiblity #2
My Canon 5D MKII raw images exported using JPEG with Quality = 100 produce files slightly smaller than the raw file, which is typically 25-30 MB. Images with large even toned areas will be smaller and images that have high uncorrected Luminance noise will be larger. Check your Luminance NR setting, set it to 0 and try again.

Similar Messages

Croping and sizing issues

I have been using lightroom 4 for about 5 months. But I am having issues with croping and sizing of pictures. When I use the crop tool it does not always draw the picture in closer. I do shoot in RAW and not in JPEG. I was wodering if there is a setting that I am not using or its not avaiable. Also when I export out of lightroom4 and convert them from RAW to JPEG I have sizing issues depending on what size the customer orders. I have tried to export them out at certain sizes but its still not correct. The only way I have found to do it is going into photoshop and sizing them correctly but its very time consumeing . Any help would be great!!

You didn't tell us the desired output. All you said "...but its still not correct". What output are you trying to obtain?
Also, what do you mean "When I use the crop tool it does not always draw the picture in closer"? Normally, you drag a corner (or corners) of the crop rectangle to crop tighter. Are you doing this? Is it not working? Explain.

How do I avoid sizing issues with a Bevel?

I am designing a logo for a startup business, and a beveled filter really looks nice for this particular company. The client really likes what I came up with. The problem is the filter seems to cause sizing issues. Enlarging it is creating ugly pixelation. Is there a method for avoiding this, or can I simply not use a bevel?
Thanks.

In the preferences check scale strokes and effects

Sizing Issue

I'm doing a project for school and having some sizing issues
with my pages. earlier in the project my partner and I had some
major issues with style sheets and banner headings, but now
whenever we preview a page it changes size. We have about 10 pages
and when you change from page to page the main text area either
becomes really big, shrinking the other text areas, or becomes
extremely small letting the other text areas take over. Can anyone
tell me what we are doing wrong and how to dix this problem?

Can you post a link to these pages, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"luv4dirish" <[email protected]> wrote in
message
news:ekhd19$abb$[email protected]..
> I'm doing a project for school and having some sizing
issues with my
> pages.
> earlier in the project my partner and I had some major
issues with style
> sheets
> and banner headings, but now whenever we preview a page
it changes size.
> We
> have about 10 pages and when you change from page to
page the main text
> area
> either becomes really big, shrinking the other text
areas, or becomes
> extremely
> small letting the other text areas take over. Can anyone
tell me what we
> are
> doing wrong and how to dix this problem?
>

[svn:fx-trunk] 5367: The changes here are mostly fixing some sizing issues.

Revision: 5367
Author: [email protected]
Date: 2009-03-17 15:26:35 -0700 (Tue, 17 Mar 2009)
Log Message:
The changes here are mostly fixing some sizing issues.
For the FlashContainerPlaceholder, the first child is now MyFlexContentHolder, which extends mx.flash.FlexContentHolder but meets the invariant that it has 1 child and that child is FlexContentHolderThumbnail, which I?\226?\128?\153ve added as a swc to the project. I changed this by accident last time to refer to mx.flash.FlexContentHolder, when it should've referred to a concrete instance created by Flash from a swc. I also added a chrome of 151x151 to match the FlexContentHolderThumbnail since otherwise the container itself would have no chrome at all, and this let?\226?\128?\153s it size correctly.
Also, for sizing, in a container, rather than sizing to the size of the chrome, I now size to the size of the FlexContentHolder thumbnail that all FlexContentHolder?\226?\128?\153s have. This means in ContainerMovieClip, I don?\226?\128?\153t need to override bounds anymore.
ContainerMovieClip now implements IVisualElementContainer.
Also, I fixed a resizing event bug in UIMovieClip where the resize event was getting dispatched more than once.
QE Notes: -
Doc Notes: -
Bugs: SDK-19271, SDK-19788, SDK-19789
Reviewer: Glenn
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19271
http://bugs.adobe.com/jira/browse/SDK-19788
http://bugs.adobe.com/jira/browse/SDK-19789
Modified Paths:
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/ContainerMovieClip.as
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/FlexContentHolder.as
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/UIMovieClip.as
flex/sdk/trunk/frameworks/projects/utilities/build.xml
flex/sdk/trunk/frameworks/projects/utilities/src/FlashComponentPlaceholder.as
flex/sdk/trunk/frameworks/projects/utilities/src/FlashContainerPlaceholder.as
Added Paths:
flex/sdk/trunk/frameworks/projects/utilities/libs/
flex/sdk/trunk/frameworks/projects/utilities/libs/FlexContentHolderThumbnail.swc
flex/sdk/trunk/frameworks/projects/utilities/src/MyFlexContentHolder.as

Hello Everyone,
We request you all to try your applications with http://labs.adobe.com/technologies/flashplatformruntimes/air3-5/
Release Notes - http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/shared/air3-5_flashplayer11-5 _releasenotes.pdf
Please let us know how it goes.
-Thanks
Pahup

[svn] 2913: Fix SWFLoader sizing issue (SDK-16497) Refactor some classes to try to fix ASDoc build.

Revision: 2913
Author: [email protected]
Date: 2008-08-19 21:55:11 -0700 (Tue, 19 Aug 2008)
Log Message:
Fix SWFLoader sizing issue (SDK-16497) Refactor some classes to try to fix ASDoc build.
Review: DJL
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16497
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/airframework/src/mx/managers/WindowedSystemMa nager.as
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/controls/SWFLoader.as
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/ISystemManager.as
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/SystemManager.as

Thanks for sharing.

Lightroom CC issues with multiple export at the same time

Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

Edit in external editor with lightroom adjustments issue LR5 and PS CC

Since several days when I try (in Lightroom) 5 to edit an adjusted file (NEF, JPEG or TIFF) in Photoshop CC as external editor (with the option "edit a copy with lightroom adjustments") in many cases the adjustments ar not visible in photoshop CC, or only partial visible, and sometimes the file opens not at all. Removal of the preference files of LR 5 and PS CC and a whole new installation of LR 5 didn't resolve the issue. I have a macbookPRO with Mac OS 10.8.5 and the most recent versions of LR 5 and PS CC. Has anyone experienced this problem and what can be a solution.

I have no idea, but have you tried File / Catalog Settings/ General tab: Relaunch and Optimize. Relates to the database.

Lightroom 4 issues

I have installed the upgrade of lightroom 4 and windows 7 will not open it stating there are compatibility issues. What do I do?

Did you have 3.x before? Is 3.x still working?
Did you run the installer as administrator?
Does LR 4 not even open or when does the error occur exactly?

Lightroom tether issues.

I shoot events where lots of folks line up to get photographed and I use LR to aid in getting the best shots and allow the clients to select their favorites.
I own a Nikon D700 and tether it to my recently purchased a Dell Inspiron Laptop with WIn7, I-5 processor, 6GB ram & 640GB HD using LR3.2 RC
I bought this computer to solve what I THOUGHT was a problem related to my old Gateway Win XP 2GB laptop.
Turns out the problem reappeared on my brand new zippy Dell.
Lightroom just stops working.
Last Saturday Night I was humming along on my new computer, allowing clients to select their favorite image(s) to be sent out later.
Humming along right until I hit image #112.
Then my client said: "Hey, where are the rest of my images?"
Sure enough, they weren't on the computer. and they also weren't on my camera.
Now the LR tether control bar reported "No Camera found."
OMG!!!
Had the 15ft USB2.0 cable come loose?
I spent several minutes checking my connection. Still no camera.
Yikes!
I got out my spare USB2.0 Cable and switched it in. Still no camera.
I replaced my still showing good Nikon Camera battery. Still no camera.
I turned LR off and on.
Restarting LR may have worked the first time, but it definitely did not work the next time.
(I think I tried purging the LR cache,but when you are staring at a problem like this,
and people are lining up and some are leaving you don't remember everything you did,
but I had "NO CAMERA FOUND" several times that night and tried everything more than once.
Ultimately: Rebooting was the only solution. (Tick-tock, tick-tock.)
(Meanwhile using the LCD on the back of the camera to show folksw their photo choices.)
After rebooting I could get another bunch of images loaded using tethered capture until it happened again.
(Maybe another hundred images or so - this occured around 4-5 times Saturday night.)
So now I am convinced it is not my computer.
I am now CONVINCED that what is happening to my computer(s) is that LR that is causing the problem when my computer stops recognising my camera.
This has happened every time I have used lightroom to download & view images on the computer.
Since this has happend to me before, I keep trying new ideas. but LR keeps failing.
Is it a "memory leak"?
Maybe it is time to get another program.
(Open to suggestions!)

I am a photographer who started recently experiencing similar problems with tethering my Nikon DSLR's to LR3.
First, a quick overview of my systems:
- I am running LR v3.4.1 on both of my 2 x MacBook Pros.
- My new (3+ months-old) unibody MacBook Pro is running OSX 10.6.8.
- My older (2.5 years-old) unibody MacBook Pro is running OSX 10.5.8.
- I own a Nikon D3 and a Nikon D3x.
- Both cameras are up-to-date with the latest firmware, which is v.2.02 and v.B:1.01 respectively.
About 6+ weeks ago, I was shooting in my studio -- tethering my D3x to my new MBP using LR3 -- when I received an Apple OSX error message saying (something about) the USB port drawing too much power.
**I apologize that I cannot recall the exact USB error message; I was confused as the computer was virtually brand new and I had never seen such an error message before. I should have noted the exact phrasing of the error message, but unfortunately I did not.**
From that moment onwards, for the rest of the shoot, the camera would only intermittently connect/tether to LR; it kept dropping out and images would not download to the laptop. Thinking I had a camera USB cable problem, I shot the rest of the job on my CF cards instead. And, to be honest, as I was very busy that day and then traveling overseas on holiday for nearly a month the very next day, I didn't think too much of about it again.
About a week ago I had my first commercial shoot since returning from holiday. Thinking I had a camera USB cable problem the last time I shot, I got a new camera USB cable for this shoot. I then used this new cable to tether my D3x to my new MBP, and it worked without fault throughout the entire 2+ hour shoot. By this time, I had all but forgotten about the USB error message I had received a month prior, and -- believing I had solved the previous issue -- I had well and truly moved on.
Then, over the past couple of days, I have been shooting another commercial job with my D3x tethered to my new MBP. The setup worked fine for the first 20+ images, but when I stopped shooting to review the work in LR, and then started to shoot again, the new images stopped downloading to LR. Strangely, I did not receive another USB error message; the new images simply didn't appear in LR. However, the LR tether bar still showed the camera connected, as well as displayed the camera's shutter speed, F-stop and ISO, etc. I left the camera turned on, but stopped and restarted tethered captured in LR. The camera appeared detected/connected and the images I had just shot moments earlier (that hadn't initially appeared in LR) automatically downloaded into LR and appeared on the screen.
Weird, I thought, and moved on.
But when I started shooting again after the next break I took, the same thing happened to me again. And it continued to happen all shoot long over the past two days: anytime I stopped shooting to take a break or talk to the models or review the images, the camera seemed to mysteriously "disconnect" from the MBP. Although, strangely, the D3x always displayed as connected in the tether bar alongside it's most recent shutter speed, F-stop, ISO value, etc. However, once the camera had "disconnected", these values were frozen on the LR tether bar and would not change even when I changed them on the camera (as they normally do when tethered). And, again, once I stopped and restarted tethered captured, the camera was immediately detected again and the images I had just shot (that hadn't appeared in LR) automatically downloaded into LR and appeared on the screen.
Frustrated, I tried using different USB ports on my MBP. That didn't help.
So I tried changing my camera USB cable again (to another new back-up one I had). That didn't help.
So I tried changing the USB extension cable that I was running between the camera's USB cable and my MBP (to a back-up one I had). That didn't help.
So I tried changing cameras and tried shooting with my D3. That didn't help.
So today I tried deleting LR3 and reinstalling it again (only LR v3.0.0). That didn't help.
So I upgraded LR to v3.4.1.). That didn't help.
Then I tried the exact same set-up -- shooting tethered on my OLD MPB running LR 3.4.1 and it's older operating system OSX 10.5.8 -- and using all the various iterations outlined above (e.g. using both USB camera cables, using both USB extension cables, using both my D3 and my D3x, using both USB ports on the old MPB, etc) and was simply unable to replicate the problem. Tethering both my cameras to my old MBP worked fine across all variations; they never "froze" or "disconnected" at any point.
Well, the problem MUST be with the USB ports on my new MBP, right?
Well, I am not convinced the problem is with my USB ports. This is why...
- I've never had a problem in the past 6+ weeks (since the initial error message) with any of my USB ports on my new MBP.
- And I've never had the USB power error message appear again.
- The USB ports sync/charge my iPad fine.
- The USB ports sync/charge my iPhone fine.
- The USB ports operate my mouse and my printer fine.
- The USB ports operate my memory sticks and external hard drives fine.
I even called Apple Support the other night and told the tech support person my problem and she helped me to reset the PRAM and NVRAM, but it still didn't help.
And, the real kicker (and most confusing/frustrating thing for me): as I sit here, I've had my D3x tethered to my new MBP using Sofortbild (a Mac tethered shooting application) for the past two hours and it works perfectly: any images I shoot tethered to my MBP using Sofortbild download without any problem. The application never freezes. The D3x never stops working. I can shoot 25 in a row, take a break for 5, 10, 15 minutes and return and Sofortbild and the camera will still work fine. Exactly the opposite of LR3 on my new MBP.
I have wracked my brain, and the only thing that is different between my old MBP and my new MBP is the OSX version (10.5.8 vs. 10.6.8). So perhaps there is a bug in the latest OSX that is causing this problem with LR, and when I recently downloaded an update to OSX it somehow started this issue? I have to believe the USB error message I received is simply a coincidence, as the USB ports work fine for everything else (including tethering my D3x to my MBP right now using Sofortbild).
Does anyone else have this issue? I am exhausted by this and welcome any insight or assistance that anyone might have. I am stumped, but certainly open to suggestions to solve this issue. The whole reason that I bought a new MBP was for faster tethered shooting in LR. Now that it doesn't work, I am clearly upset.
Thank you in advance to anyone who can shed some light on this.
Scott

WebView sizing issue

Hi,
I'm embedding a WebView through a JFXPanel in a existing Swing app and running into some issues regarding to sizing.
My issue is that sometimes the height/width reported in JavaScript inside the WebView is 800*600, while most of the time it is reported to be equal to the dimensions of the WebView/Scene/JFXPanel. As the content I'm showing is a chart that renders itself to a size according to the dimensions of a parent DOM node, which is in this case the document.body, you can imagine that the results are wrong when the values reported in JavaScript for width and height are wrong.
Ideally what I want is that the size of the body of the HTML document automatically follows the dimensions of the JFXPanel, meaning that is the JFXPanel gets resized, the dimensions of the scene/WebView follow suit. As this is not possible AFAIK, I've now setup a ComponentListener on the JFXPanel to update the dimensions of the WebView through the componentResized method of the ComponentListener. However, this still gives me the mixed results.
I've setup a log of logging and I see that when the JavaScript layer reports the 800*600 dimensions, the dimensions of the WebView, Scene and JFXPanel are NOT reported as 800*600, but all report the actual size.
My setup is as follows:
- JFXPanel containing a Scene containing a WebView.
- The scene is constructed without specifying a width/height
- The JFXPanel is dimensioned by a special Swing layout manager
- The WebView is loaded with custom HTML through loadContent() of the WebEngine
- The body of the HTML document is sized 100%*100% through CSS
- Dimensions in JavaScript are retrieved through document.body.getWidth/Height
- In the custom HTML a chart is instantiated with the dimensions of the
- Using Java 1.7 update 25 64bit on Windows with the bundled JavaFX
Any thoughts appreciated.
P.

Please a correction i have seen that this error is produced on every scheduled report. The problem i am facing is that the campaign consolidated daily report is not imported in the specified folder.
Help!

Lightroom print issues with Espon Stylus Pro 4900

I'm having a weird issue with my StylusPro 4900 + Mavericks/Lightroom
My prints keep coming out 1/3rd their normal size.
I spent the day troubleshooting and no luck
Using LR4 ad now CC LR + Installed all the updates.
Uninstalled old the old drivers and reinstalled new.
Restarted several times.
Cleaned up the OSX stuff and more .
I have been using Epson's for over 10 years but have never run into an issue like this.
I'd appreciate any ideas or help!

Not hearing back about the details of your "success" with the Epson driver install, I can only assume that it really does not work correctly - as is the case with everyone else I've read about trying to use the 2200 under Snow Leopard.
The only work arounds are two, and neither is satisfactory:
1. You can turn off Color management in the first photoshop print dialog and then select the color managed option in the second - this defaults to the printer's drivers instead of using those in photoshop. The result is not right - the colors and brightness are noticeably off - but it is "less unbearably horrible" than what you get if you try to print with the correct workflow: Photoshop manages colors in the first dialog and No color management selected in the second.
2. There is a Gutenberg driver for the 2200 that theoretically could let you print without the Epson printer drivers. However, I have yet to encounter anyone who has gotten this to work properly so that it duplicates the color results formerly achieved with the Epson driver and photoshop managing colors under the earlier versions of the OS.
This is not a good thing. Many of us who rely on the Epson 2200 are not suddenly and without warning and with no word whatsoever from Epson... just plain SOL...
Epson should at least say something about this. Their statement could be "we will not support this printer under Snow Leopard" (terrible policy, but at least we could all go out and shop for new HP color printers...), "we are updating drivers for this (these?) printer(s) and will have them available shortly," or even "we are looking into this problem and will respond shortly."
Right now the silence is deafening. There isn't anything at the Epson site addressing this issue at all, and there is no way to follow up on it from the page addressing Snow Leopard compatibility.
Poor show, Epson.

Lightroom Sync Issues

I am sure this topic has been beaten to death, but I have yet to find an answer.
First off, my sync speeds are painfully slow. I have 50 Mbs down and 5 Mbs up on my ISP so speed isn't an issue on my end. I tested my connection speed while Lightroom wasn't even open and very little network activity was taking place.
Now, Lighroom has been stuck on the same photo count in the "status" area showing the sync for hours. I have tried restarting Lightroom a couple times to restart the connection with no luck in getting anywhere.
Has anyone found a solution to this? I really want this sync between Lightroom desktop and mobile to work, but so far it seems to be great in concept.
I am using Lightroom 5.5 on an iMac running Mavericks.

I'm not entirely sure what status you're in right now from the thread - whether you stuck in his sync or it's slow?
And what steps have you taken to get into the situation you're currently at? You're syncing a lot of images, so did you just start sync by logging in, then selecting all these collections for sync and then waiting for it to sync? Or have you performed any steps in the meantime? Are you syncing new images both from your desktop to your devices and from the devices back to the desktop at the same time?
According to the log you have been running for ~8 hours and synced ~3000 photos. That's not great performance overall, but it's also not bad enough to make me sure that there's something going wrong here.
If it's just going slowly, does stopping Lightroom and restarting speed things up again? We shouldn't really be getting much slower over time with those image counts, but it's possible there is some issue there that we haven't caught.
-Guido

Lightroom CC issues

I have installed Lightroom CC on a 2009 21.5" iMac running Yosemite, 16Gb RAM, NVIDIA GeForce 9400 256MB. I got past the initial installation issue by the suggested method but Lightroom crashes frequently. I have re-installed and this is still the case. Any thoughts? Thanks

My 2009 17" MacBook Pro actually has two GPU - GeForce 9400M 256MB and GeForce 9600M GT 512MB, either of which I can select in OS X Sys Prefs Energy Saver panel. With the 9400M 256MB selected, LR crashing out is frequent. With the 9600M GT 512MB selected, somewhat less-so. Dificult to be statistical about it as I am not using LR CC so much yet as I am doing mostly Photoshop work at the moment. I should also have said I am running LR CC in dual-display mode, with 1920x1200 as the main and 2560x1600 as the secondary (which means mostly as loupe in the Develop Module); that clearly will affect GPU loading also.
LR should not really just crash out if not enough GPU memory, just switch back to CPU to do that render, so there is something Adobe should tidy-up. I don't quite understand the crashing at start up on a "sensitive" image (until navigate away and back) either.

Muse sizing issue

Hello!
I am having a problem with the sizing of my website. When i view on a large screen (iMac) everyone looks spaced fine, but then when i test the same design on a Macbook laptop the design is no longer centered.
Does anyone know how to fix this issue?
Thanks!
Eric

Hi Aish,
what should you do if you can't reduce the length of your muse site page? I've changed the page property settings and switched off the Sticky Footer but I'm still unable to make my page shorter as (annoyingly) the properties seem to revert back to their original settings. Is this a bug?

Lightroom 5 sizing issue

Similar Messages

Maybe you are looking for