Lightroom book has been lost - using Lightroom 5.7

I started a saved book under a Collection. As the book was getting large, I started another collection and copied a much smaller subset of pictures to the new collection and completed a book, uploaded to Blurb.
However when I go back to my original large collection, it still has all the pictures in the collection but the book is now the much smaller book. Is it possible to retrieve the original larger book?

Right-click on one of the other section headers. In the context menu that appears, make sure there is a checkmark in File Handling.

Similar Messages

  • I  used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

    I  used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

    If you still have your serial number, look at OLDER previous versions http://www.adobe.com/downloads/other-downloads.html
    Otherwise, the US$ 9.99 plan is what is current at Cloud Plans https://creative.adobe.com/plans

  • My Mac book air has been lost, how can i track? I have been already using Icloud id to track...but the system is still offline...what other ways can i track this?

    My Mac book air has been lost, how can i track? I have been already using Icloud id to track...but the system is still offline...what other ways can i track this?

    You cannot. Your best course of action is to immediately change all your internet passwords, notify the police and your insurance company. Send the remote wipe command to the MBA through iCloud.com and buy a new one from the insurance reimbursement.

  • I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be

    I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?

    If you never bought the product then you cannot get the serial number.

  • My iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod

    my iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod from a laptop or a different way to find it.

    If your phone is offline, the ONLY way to find it is to look for it the old fashioned way.  Your phone CANNOT be located electronically if it's offline.

  • My iPod has been lost for about a month now and I wanted to know if I can find it using the serial number because I don't have iCloud set up on my ipod

    My iPod has been lost for about a month now and I wanted to know if I can find it using the serial number because I don't have iCloud set up on my ipod

    No.
    You cannot.
    Sorry

  • My email account has been hacked and my address book has been used to send unsolicitated emails to all my contacts, how can I stop this activity

    My email account has been hacked and my address book has been used to send unsolicitated emails to all my contacts.

    First of all
    Run windows in safe mode (with network) and change your password on your email account.
    Then
    run several anti-malware programs (there are many free ones, but not all are trustworthy)
    Malwarebyte >> http://www.malwarebytes.org/mbam.php
    Microsoft Safety Scanner >> http://www.microsoft.com/security/scanner/en-us/default.aspx
    Windows Defender >> http://windows.microsoft.com/en-us/windows/using-defender
    Spybot >> http://www.safer-networking.org/en/index.html
    Kasperky >> http://www.kaspersky.com/security-scan
    Rootkit scanner TDSS-Killer >> http://support.kaspersky.com/5350
    And when all is clean, change password for your email account again.

  • My iphone has been lost and already reported to the police is there any solution to get my phone imie? using the phone serial number?

    My iphone has been lost and already reported to the police is there any solution to get my phone imie? using the phone serial number?
    Help me pls

    http://support.apple.com/kb/HT4061

  • Hello.  I have an old G4 Tower at 10.4.11.  The password for Keychain has been lost.  How can I generate a new password for Keychain?  Every time I use Safari it want me to enter the password.  Any suggestions?  Thank you

    Hello.  I have an old G4 Tower at 10.4.11.  The password for Keychain has been lost.  How can I generate a new password for Keychain?  Every time I use Safari it wants me to enter the keychain password.  Any suggestions?  Thank you

    See if this helps...
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
    Keychain Access asks for keychain "login" after changing login password...
    http://support.apple.com/kb/HT1631
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • What has been lost in Numbers 3.0 upgrade?

    Has anyone got a list of features that has been lost in the new version of Numbers?
    I am aware (and disappointed) that the useful Categories feature has gone (I have requested this feature back on relevant Apple page). I think I also saw that Print view had disappeared.
    What else has gone? I make extensive use of filtering and sorting - if those features have been watered down then I think I may not bother updataing.
    Thanks in advance,
    Simon.

    SJ,
    Here's my list as of 10:30 EDT:
    Function or feature or issue
    Reorganize Panel gone
    Categories View gone
    References now don’t follow sorted rows as they did before.  (Now like Excel)
    Table Fills not supported
    German user can’t use decimal point from numeric keypad.
    Split Cells is gone
    Sheet View seems to be the only view available during editing. Page view only available in the Print dialog.
    Page Headers and Footers are gone
    Edit Toolbar (add, delete, rearrange tool icons) is gone.
    That's it from here at this time, but I think I have just scratched the surface. Would love to hear from others who are keeping a list.
    Jerry

  • This book has been returned.  Loan not on record

    I've used Adobe Dig Ed on a Windows XP computer for years with no problems.  I recently switched over to Windows 8.1, and reinstalled Adobe DE, and went through the authorization step for the computer.  Then I downloaded two books from the library, and read them with no problems.  However, the next time I tried I ran into problems.  I am able to download the books to Adobe DE.  I can open the books in Adobe DE (but it would be tough to read in ADE on the computer, because of no formating). I can copy the books to my nook, the same way I always have, and they show up in my nook.  But when I try to open in Nook, I get "Error dialog - This book has been returned.  Loan not on record".
    I turned off Virus protection and tried again, with same results.
    Any help?

    Worked like a charm!!
    - Uninstalled 4.0, Installed 3.0.
    - De-authorized ADE, removed borrowed book from library (not returned, just remove!).
    - Re-authorize ADE, re-add book (no need to download again, just add already downloaded file) and move it to Nook.
    - Enjoy reading!
    So happy!!

  • Changes made in Book Module do not "stick" when the book has been duplicated

    Lr 5.2 stand-alone version (not CC) – Win 7 64-bit
    I had made a duplicate of the book (right-click the book Collection and select <Duplicate>). Then I made changes to the original book – changed the font for captions and for body; changed the wording of the body text; changed the padding for images. At some point in the process these changes did not '”stick” anymore. The changes were visible as long as I worked in the Book Module. But the changes were gone and the book reverted to the previous state as soon as I went to the Library and back to the Book Module. Same thing happened when I closed Lr and re-opened it.
    Replacing the Preference File did not change this behavior. But when I deleted the duplicate book the behavior of Lr went back to “normal”, i.e. the changes now “stick”.
    In my opinion there must be a bug that prevents that changes “stick” when after a Duplicate of a book has been created.

    You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
    Do you have the latest patches?
    When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
    If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
    Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
    As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
    Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
    If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
    Good luck!

  • Reconnecting to AMF channel after connection with BlaseDS has been lost

    Hi there,
    I am beginner to flex and I have a problem with to login after the connection to the BlaseDS has been lost.
    Setup:
    The flex client calls a HelloWorld Java service exposed using spring-flex.  This service is called when the user hit the Hello World button on the UI.  The channel set on which this service is exposed is secured and for now we will resort to programmatic authentication.  (The user does is not required to input his username and password, just to simplify it a bit). 
    As a client framework Cairngrom is used and an appriopriate delegate is setup to handle the remote object call.
    Here is a snippet from the HelloWorld delegate class called after the user hits the Hello World button.  
              public function getHelloWorldMessage():void{
                if(!__service.channelSet.authenticated){
                    var token:AsyncToken = __service.channelSet.login("username", "password");
                    token.addResponder(new AsyncResponder(
                        function(event:ResultEvent, token:Object = null):void {
                            Alert.show("You are logged in", "Login");
                            // Send the amf request to the backend.
                            var token2:AsyncToken = __service.getHelloWorld();
                            // Add the responder.
                            token2.addResponder(__responder);
                        function(event:FaultEvent, token:Object = null):void {
                            Alert.show("You are NOT logged in", "Login");
                }else{
                    // Send the http request.
                    var token2:AsyncToken = __service.getHelloWorld();
                    // Add the responder.
                    token2.addResponder(__responder);
    The __service is the Hello World service has been defined as follows.
    <mx:RemoteObject id="helloWorldServiceRemoteObject" destination="helloWorldService" channelSet="{helloWorldChannels}"/>
    <mx:ChannelSet id="helloWorldChannels" >
            <mx:AMFChannel uri="http://localhost:8080/helloworldservice-war-1.0.0.SNAPSHOT/messagebroker/amf/" />       
    </mx: ChannelSet>   
    What happens:
    User clicks on the Helloworld, the program hits the getHelloWorldMessage and the ChannelSet.login("username", "password") is called.   The channelset authentication flag is set to true, and the _authAgent present in the ChannelSet class which was previously null is set
    The success handler is called and the secured spring function returns the "Hello World" message.  
    I restart the BlaseDS server to simulate an intermittent connection.
    Now the user clicks on Hello World button again and recieves an error since the authentication flag is still set to true there is no attempt to login again.
    The following FaultEvent is caught
    faultCode=Client.Authentication
    faultString=An Authentication object was not found in the SecurityContext
    The user reclicks the Hello World button this time however the ChannelSet.authenticated  is set to false and the client code attempts to reconnect however fails.  The snippet below is an extract from the ChannelSet.as, when the user reclicks, the second condition is met and the  IllegalOperationException with error message "ChannelSet is in the process of logging in or logging out."  is thrown.  The condition is met since the _authAgent is not null. 
    public function login(username:String, password:String, charset:String=null):AsyncToken
            if (authenticated)
                throw new IllegalOperationError("ChannelSet is already authenticated.");
            if ((_authAgent != null) && (_authAgent.state != AuthenticationAgent.LOGGED_OUT_STATE))
                throw new IllegalOperationError("ChannelSet is in the process of logging in or logging out.");
            if (charset != Base64Encoder.CHARSET_UTF_8);
                charset = null; // Use legacy charset, ISO-Latin-1.
    Does someone have any ideas as to how to resolve this?

    Hi. That sounds like a bug to me. What version/build of BlazeDS are you using? I'd try this out with the latest (nightly) BlazeDS 3.x or BlazeDS trunk build and see if it's still an issue. If it's still an issue you can log a bug at http://bugs.adobe.com/blazeds. I'd think that after getting the authentication error the state of _authAgent would be set to the logged out state but that doesn't seem to be the case.
    You may be able to manually reset it for the time being. Maybe try calling ChannelSet.logout() in your fault handler and see if that does it.
    -Alex

  • How can you find an ipod that has been lost

    how can you find an ipod that has been lost and the icloud is not turned on

    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Maybe you are looking for