Lightroom does not read DR data from Fujifilm X100

NB this also applies to ACR.
If I use the Auto DR setting on my Fujifilm X100, and that then chooses DR200 or DR400, the raw files are underexposed by 1 or 2 stops respectively when Lightroom imports them. Apple Aperture however reads the DR data and adjusts accordingly. Will Lightroom/ACR be fixed to do the same?

mjconnolly wrote:
NB this also applies to ACR.
If I use the Auto DR setting on my Fujifilm X100, and that then chooses DR200 or DR400, the raw files are underexposed by 1 or 2 stops respectively when Lightroom imports them. Apple Aperture however reads the DR data and adjusts accordingly. Will Lightroom/ACR be fixed to do the same?
I am not too familiar with the Fujifilm X100, but it might be worth checking if under Camera Profiles Lr includes profiles for DR200 and DR400. For old Nikons it includes 3 profiles for Camera D2X Modes 1 to 3, plus other profiles for other settings under Picture Controls.
P.S.: I know somebody is bound to say that when you shoot RAW this does not matter.

Similar Messages

My program does not read raw files from mark III

My program does not read raw files from mark III

emac77,
Support for Canon 5D MIII RAW files was announced in ACR 7.1 (Adobe Camera Raw 7.1).
The current stable release is ACR 7.2 while ACR 7.3 is still a Release Candidate (Beta).
Starting ACR 7.2, Adobe stopped supplying a manual download link which was available till 7.1. Adobe Application Manager (AAM) is the only way for you to update to ACR 7.2.
However, here is a direct download link that AAM connects to for the download that you can use to grab the .zip or .dmg (Mac) file. Download and install. See if you're able to open your files then.
ACR 7.2 for Windows: http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
ACR 7.2 for Mac: http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.2.82/Setup.dmg
-ST

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Lightroom does not Recognize Capture Date

I have a lot of slides that I am scanning into Digital images.
The Nikon CoolScan does not include a capture date in the .jpg file so I add one using the ExifPilot program.
All other programs that I have tried correctly recognize this EXIF data, including Adobe Photoshop Elements. But the Lightroom does NOT recognize it and the file gets put into the library under "Unknown Date" Attempts to change the date with the Metadata/Edit Capture Time command do not work.
Any Ideas on what could fix the problem?

Yes, this is a problem, not only with files from scanner. I started a threat
called "Date/Time, Exif and Lightroom" on March 6 about that - have a look
there. Alas, no solution.

SelectOneMenu does not show the data from the backing bean

Here is my code:

<h:inputText id="dir"
value="#{myBean.sourceDirectory}"/>

<h:commandButton value="fetch"
actionListener="#{myBean.processFetch}" />

<h:selectOneMenu value="#{myBean.selection}">
<f:selectItems value="#{myBean.dirs}"/>
</h:selectOneMenu>
public class MyBean{
private String sourceDirectory;
private ArrayList<SelectItem> dirs;
public String getSourceDirectory(){
return sourceDirectory;
public void setSourceDirectory(String newDir){
this.sourceDirectory = newDir;
public ArrayList<SelectItem> getDirs(){
return dirs;
public void setDirs(ArrayList<SelectItem> newDirs){
this.dirs = newDirs;
public void processFetch(ActionEvent e){
//For this example, we return some hard coded values
dirs = new ArrayList<SelectItem>();
SelectItem s1 = new SelectItem();
s1.setLabel(sourceDir + "_1");
SelectItem s2 = new SelectItem();
s2.setLabel(sourceDir + "_2");
SelectItem s3 = new SelectItem();
s3.setLabel(sourceDir + "_3");
SelectItem s4 = new SelectItem();
s4.setLabel(sourceDir + "_4");
dirs.add(s1);
dirs.add(s2);
dirs.add(s3);
dirs.add(s4);
When I run the above code, I notice that the first time, (and the only time), if I hit the "fetch" button the data in the drop-down menu does get refreshed.
Subsequently, it does not change. I am not sure what I am doing wrong.
Can someone help me?

Hi,
In order to use the JDBC persistence store you have to use a non XA JDBC driver for your Data Source.
http://docs.oracle.com/cd/E23943_01/web.1111/e13701/store.htm#CNFGD221
Point-13). When configuring a connection pool to use with WebLogic JMS JDBC Store, use non-XA database drivers.
http://middlewaremagic.com/weblogic/?p=586
Hope it helps

Lightroom does not import my images from 70d camera sd card when there is video on it

I am attempting to import images into Lightroom 5 from a wedding that was shot on a 70d canon camera and recorded to an sd memory card. There are also two short videos (less than 2 minutes each) on the card. Lightroom acts as if it is importing with the progress bar showing but it just hangs there and nothing gets imported. I even tried unchecking the two videos but still nothing. I had no trouble importing images when I didn't have any videos on the card.

I have the very same problem. I only noticed it in LR 5.4/5.5. If there are any videos on the card, then Lightroom is unable to see or import any of the RAW files on it. I currently have to import the videos, disconnect the camera, delete the video files, and reattach it before Lightroom can see the CR2 files. This was not an issue in Lightroom 5.2/5.3 as far as I know. I have not changed SD cards or anything else other than upgrading to Lightroom 5.4 (and later 5.5 when I found the problem). Any help is appreciated.

SWNC_COLLECTOR_GET_AGGREGATES does not get all data from ST03

Hi guys,
we are using SWNC_COLLECTOR_GET_AGGREGATES to retrieve details from ST03, however not all details are retrieved.
Please advice.
Thanks!

Hi,
Please go through link below
[Thread|SWNC_COLLECTOR_GET_AGGREGATES;
KR Jaideep,

Logic App does not get Swagger Data from API App

I'm following the tutorial here: http://azure.microsoft.com/en-us/documentation/articles/app-service-dotnet-deploy-api-app/
I successfully added the API app, but when I add it to a Logic App, it gives the error: "Error fetching swagger api definition. Please try again."
What is going on? I know the swagger is working properly, because I'm able to consume it from the API app.
Thanks,

I have the same issue. Those links don't help and you really have not answered the question.
I'm using the basic WebApi service that is created by visual studio (plain vanilla string inputs/outputs for all the Http Verbs). The swagger works correctly, but when I deploy to my logic app I get:
If I browse to the Api App itself I can see the swagger definitions working correctly but there is indeed a red validation warning. If I click the link, however, the validator returns Http 500 Internal Server Error.
There is some talk on stackoverflow that this is to do with the https certificate that MS is using, and sure enough, if I download the swagger output from the Api App and upload it to a plain http url on another site, it validates correctly.
So: this seems insoluble. The swagger is correct, but is failing validation, and the Api App cannot be consumed by the logic app.
Here is the Api App endpoint showing the error: https://microsoft-apiapp4b8b7674e41e4a8f905a2d8b1e4a745b.azurewebsites.net/swagger/ui/index
And here is the swagger from https://microsoft-apiapp4b8b7674e41e4a8f905a2d8b1e4a745b.azurewebsites.net:443/swagger/docs/v1
{"swagger":"2.0","info":{"version":"v1","title":"PE-Services-Idml"},"host":"microsoft-apiapp4b8b7674e41e4a8f905a2d8b1e4a745b.azurewebsites.net:443","schemes":["https"],"paths":{"/api/ToEpl":{"get":{"tags":["ToEpl"],"operationId":"ToEpl_Get","consumes":[],"produces":["application/json","text/json","application/xml","text/xml"],"responses":{"200":{"description":"OK","schema":{"type":"array","items":{"type":"string"}}}},"deprecated":false},"post":{"tags":["ToEpl"],"operationId":"ToEpl_Post","consumes":["application/json","text/json","application/xml","text/xml","application/x-www-form-urlencoded"],"produces":[],"parameters":[{"name":"value","in":"body","required":true,"schema":{"type":"string"}}],"responses":{"204":{"description":"No
Content"}},"deprecated":false}},"/api/ToEpl/{id}":{"get":{"tags":["ToEpl"],"operationId":"ToEpl_Get","consumes":[],"produces":["application/json","text/json","application/xml","text/xml"],"parameters":[{"name":"id","in":"path","required":true,"type":"integer","format":"int32"}],"responses":{"200":{"description":"OK","schema":{"type":"string"}}},"deprecated":false},"put":{"tags":["ToEpl"],"operationId":"ToEpl_Put","consumes":["application/json","text/json","application/xml","text/xml","application/x-www-form-urlencoded"],"produces":[],"parameters":[{"name":"id","in":"path","required":true,"type":"integer","format":"int32"},{"name":"value","in":"body","required":true,"schema":{"type":"string"}}],"responses":{"204":{"description":"No
Content"}},"deprecated":false},"delete":{"tags":["ToEpl"],"operationId":"ToEpl_Delete","consumes":[],"produces":[],"parameters":[{"name":"id","in":"path","required":true,"type":"integer","format":"int32"}],"responses":{"204":{"description":"No
Content"}},"deprecated":false}}},"definitions":{}}

The fisrt cell in my spreadsheet does not recieve any data from lookout, using the datatable objekt

Always when I am create a link between Lookout and Excel, there is a problem with the first cell in a range using Datatable and DDE.
How can I solve this problem?

What database version are you using?
Works ok for me:
As Schema1:
SQL> create table t1 as select rownum rn from dual connect by rownum <= 10;
Table created.
SQL> create table t2 as select * from t1 where 0=1;
Table created.
SQL> select * from t1;
        RN
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
10 rows selected.
SQL> select * from t2;
no rows selected
SQL> create view stvw as select * from t1 union select * from t2;
View created.
SQL> select * from stvw;
        RN
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
10 rows selected.
SQL> grant all on t1 to schema2;
Grant succeeded.
SQL> grant all on t2 to schema2;
Grant succeeded.
SQL> grant all on stvw to schema2;
Grant succeeded.
SQL>As SYS:
SQL> create synonym schema2.t1 for schema1.t1;
Synonym created.
SQL> create synonym schema2.t2 for schema1.t2;
Synonym created.
SQL> create synonym schema2.stvw for schema1.stvw;
Synonym created.
SQL>As Schema2:
SQL> select * from t1;
        RN
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
10 rows selected.
SQL> select * from t2;
no rows selected
SQL> select * from stvw;
        RN
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
10 rows selected.
SQL>

Lightroom not reading correct data for Lens and Camera Serial Number

Hi you all.
Recently got Lightroom, and I'm so impressed - I never imagined image organizing and adjustment could be this easy and at the same time very advanced.
I have a problem, however. Lightroom (and Adobe Bridge, too) does not correctly read the EXIF data of Lens type and Camera Serial Number.
The first ~50 images I took and imported turned out correctly and displayed my serial number and lens (18-55 mm Canon) inside Lightroom.
But now, whenever I import photos into Lightroom or view them with Bridge, they all display "Unknown Lens" and "Unknown Camera Serial Number".
At first I thought that maybe the camera didn't correctly record this data on to the photos anymore for some reason, but a comparison using EXIFToolGUI shows that the metadata is EXACTLY the same as in the photos that display this info in Lightroom correctly.
I have not done any changes to either my camera (Canon EOS-350D / Digitial Rebel XT) or lens (the kit lens, 18-55 mm Canon).
It seems that for some reason, Lightroom has stopped reading these two fields of metadata - all the other fields, such as aperture and shutter speed, all display correctly.
I also tried to reimport the photos into Lightroom, but it didn't help. Neither did "Synchronize Folder" -> "Scan for metadata updates".
What should I do? I'd like my lens information do display correctly, as I'll buy a new lens soon.
I have attached one of the photos that Lightroom doesn't read the data correctly from. Try importing it into your Lightroom, and see if how the info displays.
Thanks in advance.

Are these jpgs or RAW? I have only edited metadata on jpgs.
It looks like Vista's import stripped out all the makernotes. I didn't look at your file but that seems to be what happened. Be warned, Photoshop CS2 also strips out makernotes!
Now how to fix the problem. If you want to edit the metadata on files already loaded into LR, you need to write out your metadata to the files first, then edit the metadata, then read the new metadata into LR. This is scarey for me, so I always make sure my backup is up to date on the images first.
What to do... You probably can't put back all of the makernotes, so what to do to get the lens information in. I don't know if putting back in the makernote LensType would trigger LR to reconsider its lens information. I don't know. If it had a real lens name, my guess would be no because it would have an XMP::Lens field which would override. But maybe unknown lens doesn't have this field and it would re-read the makernotes.
The other solution is to forget about makernotes for these images and put the exact text you want into XMP::Lens. I think that's the "easy" way.
In either case, you will have to become familiar with exiftoolGUI or exiftool itself. I use the command line exiftool but it looks like you can edit multiple files with exiftoolGUI. Select your files, click the edit thingy (^) under XMP, choose various, and there is lens. Put in the text you want.
I would do this with one file first. If the lens shows up after you read the new metadata into LR, you know you have it right.
Note, exiftool can write backup files for each file. This makes too much of a mess for me. I prefer to copy the directory first (I have copies anyway, I just have to make sure the backups are up to date).
Good luck! I'm struggling with a similar situation where the same lens used by two different cameras is coming out with a different name. I need to go back and "fix" the names in the images already imported, and then develop my procedure for setting a single unique name before I load new images into LR. Not too much of a problem because I'm loading in GPS information anyway... What's another call to exiftool...
Judy

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Importing clips from iMovie HD does not preserve capture date

Hi,
I am importing iMovie HD projects into iMovie 09.
The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
Thanks.

Hi,
I am importing iMovie HD projects into iMovie 09.
The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
Thanks.

Lightroom does not recognize the raw format of files loading from my Nikon AW1 and loads them as jpegs. I know there are updates that would allow this camera to be recognized as shooting raw but I haven't been able to work it out. Any help out there?

Lightroom does not recognize the raw files (necs?) coming in from my Nikon AW1. It loads them as jpegs. I know it is possible to update Lightroom so it knows my Nikon but I can't get it to work.
I would like files to be loaded as .dng.

update by downloading the files directly and then applying them for lr 4 and earlier, http://www.adobe.com/downloads/updates/
for lr 5.7.1, the last lr 5 update, use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Server Socket does not read data input stream

Hi all,
I am very newbie to Java Network programming with sockets and multi-threading.
But I am obliged to develop a chat system written in Applets which can be placed on the website and used by visitors who come to my website.
In order to understand this, I have tested a basic web chat program I downloaded from the Internet which use sockets and multi-threadings. The program work fine, no bugs at all at both compilation and run time. I noticed that all three streams for Client side (i.e. first one is input stream used receiving data from User; the second one is socket input stream used for receiving data from Server socket, and the third is socket output stream used for writing data to server socket) were established. And the same, two socket streams (input & output) for Server side were also connected when running program giving right port number and IP address of the server.
The problem is both server and client sockets do not read data using the following stream classes:
1. DataStreamInput: I use input.readUTF() method
2. or BufferedReader: I use input.readLine() method
The example of the codes are below:
private BufferedReader input = null;
private PrintWriter output = null;
private Socket socket = null;
public void open() throws IOException
{ input = new BufferedReader(new
InputStreamReader(socket.getInputStream()));
System.out.println("Server socket input stream was created, and");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Server socket output stream was created");
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
System.out.println("Server is reading data from Client, wait...");
String fromClient = input.readLine();
System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
The problem is at the line: String fromClient = input.readLine(); in the run() method? What is wrong with the codes above?
Note: I also try to use original codes which use readUTF() method in DataStreamInput class instead using readLine() in BufferedReader. Both methods dont read data from inputstream socket?
I very appreciate any help/advice from experienced developers.
Best regards

Hi,
Yes. The readLine() method hangs! After the test, the execuation of the program is stopped at the line of readLine() method; it does not pass it?
There is no problem with writing to Server socket. After the test, the program pass through flush() method. Here is the code for writing to sever socket within ChatClient (client side socket) class:
private BufferedReader input = null;
private PrintWriter           output = null;
public ChatClient(String serverName, int serverPort)
{ System.out.println("Establishing connection. Please wait ...");
try
{ socket = new Socket(serverName, serverPort);
System.out.println("Connected: " + socket);
start();
catch(UnknownHostException uhe)
{ System.out.println("Host unknown: " + uhe.getMessage()); }
catch(IOException ioe)
{ System.out.println("Unexpected exception: " + ioe.getMessage()); }
public void start() throws IOException
{ input   = new BufferedReader (new
                         InputStreamReader(System.in));
System.out.println("Client User input stream was created,");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Client Socket output stream was established, and");
if (thread == null)
{ client = new ChatClientThread(this, socket);
thread = new Thread(this);
thread.start();
public void run()
     while (thread != null) {
     String fromUser;
          try{
               while((fromUser = input.readLine())!= null)
               System.out.println("Client wasreading a data from User, and");
output.println(fromUser);
     output.flush();
     System.out.println("Client has written a data to Server");
catch(IOException ioe)
{ System.out.println("Sending to server error: " + ioe.getMessage());
stop();
etc.
Here is a piece of codes for reading data from the Client Socket in the ChatServer Class (Server Side socket):
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
{ //server.handle(clientPort, input.readLine());
System.out.println("Server is reading data from Client, wait...");
String fromUser = input.readLine();
//while((fromUser = input.readLine()) != null)
     System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
etc. Please advice why the readLine() method hangs; does not read data from the input stream received from the CLIENT?

Hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR see

hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..

Yes pretty much that, but to clarify sorry
Opened Lightroom.
Create new catalogue.
This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
In addition this Samsung SSD is not listed a drive to import from in the same dialogue window.

Lightroom does not read DR data from Fujifilm X100

Similar Messages

Maybe you are looking for