Lightroom upgrade will not load when it is opened.

When I load Lightroom upgrade to 4.0 and try to open the upgrade it hangs during loading of the catalog. I have uninstalled and reinstalled several times and the upgrade does not work. I'm running Win 7 64 bit.

It sounds like the software equivalent of a heart attack in old age! My prescription would be LR 5.7 used daily.
Bob Frost

Similar Messages

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

Try this as a first step; 
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"''''' 
and 
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"''''' 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and geong straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and going straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I can only see album pictures on Facebook in thumbnail size, when I open the picture it will not load. I can open these pictures on other computers but not mine.

I cant open album pictures on facebook on my computer, but i can on others. I can see pictures thumbnail size, so I can still see pictures, but when I go to open them to see them full size it will not load or show up.

Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar. 
A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info"). 
Open the Media tab of the "Page Info" window. 
Select the first image and scroll down though the list with the Down arrow key. 
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain. 
See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

E -mail is froze up and will not respond when trying to open a message

Was de
Letting messages from email and app froze up and will not respond to try and open up or delete messages

Try resetting your device. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.

I started setting up a web page with iWeb. Auto play box is checked, but music will not play when page is opened.

I started setting up a web page with IWeb.
Several proplems so far:
1) Auto Play box checked for music, but music does not start when page is opened.
2) Can't get Quicktime "start/stop" slide to start and finish a section within a long piece of music (classical for example). How does one work the slide bar to do this?

Yes the audio file plays on the iWeb page when I click the play button. I even made sure it played both without the “little boxes” that surround the icon (don’t know the technical name for those), and when I click the music icon without the little boxes.
I did note that the iTunes window that appears when I open the Inspector is not highlighted until I click the music icon and those little boxes appear. Then the Start/Stop, Auto Play, Loop, and Show Movie Controller are highlighted — and work properly.
One other thing. I see that the iWeb icon I am working from says “Domain copy.sites2.” Does that have a bearing on anything?

I downloaded new update for Lightroom cc and it will not load when i click on the icon or go to program to open it.

I just downloaded the new Lightroom CC from adobe cloud. I have always used Lightroom 5 with no problems. Now after downloading Lightroom CC it will not open. I click on the icon to open.... nothing. I right click and select open..... nothing. I have uninstalled and reinstalled....... nothing.

Same here, I tried uninstalling LR CC and reinstalling, same issue. Looks like they need to work on some things. I'll just use LR 5 until they get it figured out.

CS4 upgrade will not load

Have a AMD machine which I just upgraded from Win 2000 Pro to Winxp Pro SP3. Plenty of RAM. Am upgrading photoshop CS2 to CS4. Have completely formatted/partitioned the drive numerous times. Everything loads fine off of the DVD/CD drive except for the CS4 upgrade disk. It is not the disk as the disk can be read by most other machines I put it in. Have tried another cd drive taken out of a pc where it could be loaded, but would not load on my pc. My Computer will show the drive but no data whatsoever. It seems to have a problem when I try to load it into two other AMD machines... All Intel machines running XP it loads up just fine.

Installed all the specific AMD patches? Since you speak of upgrading from Win2k, the procs may simply be too old. CS4 does not support those anymore since they don't offer the required features for SSE2/ 3 and all that...
Mylenium

ITunes will not load when I click on 'View in iTunes' button

I get error message -
"The folder iTunes is on a locked disk or you do not have write permissions to this folder"
I have full administrator rights on this PC, so why will iTunes not load ?
Frank

are you sure your i-tunes is installed proper cause the icon is just a shortcut to the program.You might have some missing files. If so you may need to uninstall it and reinstall a new one.

Firefox will not load when I double click icon, but is "running " in the backgr

Just recently my firefox will not open at all. I ahve tried to unistall and then reinstall and that did not help. When I go to shut down my computer, it states that firefox is "not responding" and do I want to end the program. HELP!!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

After using LR 2.6 for years, yes... I like that version - It will not load when it did just last week.

My LR 2.6 install has worked fine for years on my black Mac, running 10.6.8. It suddenly pushes my CPU to overdrive, my fan kicks on and it will neither load libraries or finish creating new ones. It will not completely load despite waiting forever... literally. Any ideas? Anyone. I have years of libraries that I can't open right now. I have rebooted, force killed, etc.. I have not reloaded the app from scratch (last resort).
Thank you.
Todd

It sounds like the software equivalent of a heart attack in old age! My prescription would be LR 5.7 used daily.
Bob Frost

Firefox will not load when the icon is clicked

I have been running Firefox for a few months now on my Windows 7 64-bit Laptop, however recently when I clicked the firefox icon the firefox window does not appear, I have attempted restarting my computer, allowing firefox on my firewall, running firefox with admin permissions, reinstalling firefox, but none of these methods seem to work. I haven't recently installed any add-ons or updated my firefox. Any solutions?

Did you remove the Firefox program folder before reinstalling Firefox?
Do a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

IPod will not charge when iTunes in open in Windows 2000

I have a problem with WIndows 2000 iTunes install where the iPod will connect but as soon as it has finished synchronizing the iPod will go back to the main screen and stop charging. I saw several posts on this with no resolution.
I dont have a fix yet but I do have a work around.
Fire up iTunes and plug in the iPOD. It will recognize it and sync. Then select Options and in the iPOD tab uncheck the box which says " launch iTunes when iPOD connects" or something similar. Apply and Exit from options menu.
iTunes will resync with the iPOD. You can now disconnect the iPOD and close iTunes.
Now if you connect the iPOD, iTunes will NOT launch and the iPOD will charge fine, at least mine does:-)
If you now run iTunes it will still connect automatically with the iPOD as before and do all the usual stuff. The only downside to this workaround is that you have to manually start iTunes ( hardly a big deal) and close it and disconnect then reconnect the iPOD ( or just connect it and not start iTunes) for it to charge.
Works for me.
There was a lot of black magic quoted on this support site relating to buying chargers, third party or otherwise and USB not having enough power on thursdays with a 7 in the date or having to use a powered hub of a particular color , alien interference etc etc. All bogus.
Its an Apple software problem and I hope they fix it in the next iTunes release.
Hope this helps.

Thanks for the info, but I finally found what was the problem.
It seems to be related to Itunes config and Nano firmware. I found another post talking about this "Topic: Self-ejecting Nano".
I had to enable disk use in ipod options, but this causes me to manually eject Nano.

DPS builder custom html page not loaded when you first open the application

I created app with some customs html pages.
I tick the "Auto launch" and when the first time I run the application, the page does not load.
If you go to another page and return to - it is loaded. If you close the application and open it again - all loaded. But when you first open the application page does not load.
What could be the problem?

I created app with some customs html pages.
I tick the "Auto launch" and when the first time I run the application, the page does not load.
If you go to another page and return to - it is loaded. If you close the application and open it again - all loaded. But when you first open the application page does not load.
What could be the problem?

PDF loaded using ActiveX will not load when the executable is used on another computer

Hello,
I am fairly new to Labveiw and have created a CAN diagnostic tool which uses an ActiveX control to display the CAN Spec PDF on the front panel. This works absolutely fine and still works fine when I create and use an executable on the same computer. However, I need to use the application on multiple computers that do not have Labview installed, and therefore require the executable. I have tried placing a copy of the PDF in the "Volume" folder and recreating the .exe with that path, then placing it in the same location on another computer, but no luck. I am fairly certain it has to do with the static file path, set in the Main VI, since it refers to a static location that does not necessarily exist on the next computer. I need some way to get around this though, so that I can easily transfer the application from one computer to another. The code I am using is very simple; I just open Adobe Reader and the file during initialization then close the reference path (see attached picture). Any Ideas?
Thank you for your assistance!
-Mike
Attachments:
ActiveX_pdf_code.jpg ‏23 KB

A solution that I have found to work well is to use the Project Directory node as a root path. In the development environment this node will always return the path to the directory containing the project that is calling it. In an executable, it returns the path to where the executable is located.
With that known starting point, I can put files like that pdf in either the same directory as the project/executable or a subdirectory of that location and I can always find it.
When creating a build spec you can include non-LV files and specify destinations for them. Likewise, the installer will then put these files where they belong during the installation.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Lightroom upgrade will not load when it is opened.

Similar Messages

Maybe you are looking for