Lightroom won't export more than one image at the time

I am having trouble exporting my RAW files as JPEG files. At first Lightroom 4.4 seemed to skip certain photos when exporting and now I'm unable to export more than one image at the time. How can I fix this? I didn't seem to have this problem before the 4.4 update, but then again, the 4.4 update has been running for a few days now. I run on a 32bit Windows 7 with 4GB of RAM.
Lightroom has also been a considerable lot slower since the last couple of days, yet there have been no changes at all to my computer or system or anything - nothing's changed expect for the fact that Lightroom isn't behaving as it used to.
Can anyone help me?

I think I've found the problem - I've accidentally 'synced' my folder instead of importing the RAW files. Which brings me to my next problem and question - I've already edited the RAW files and would really like it if there's a way I could re-import the files without losing my changes/metadata, is there anyway that's possible?

Similar Messages

  • When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

    When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
    I've tried rebuilding the thumbnail database, but that hasn't helped.

    What version of iPhoto and system are you running?
    Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left.  Does that let more than one photo display in the window?
    OT

  • How do I view more than one image at the same time in CS6?

    How do I view more than one image at the same time in CS6?

    Hi there
    If you go to Window > Arrange you can choose from several view options. Below I have selected Two-Up Horizontal since I have two images, but you can select other options if you have more than one image.

  • Is there a way to reset more than one image at a time?

    I have a folder with 1100 images taken on four different cameras. I have a new default setting for one of the cameras that I would like to apply to most but not all of the images in this folder. I could remove the offending images and reimport, I could filter by serial number and sync a preset. It would be easier, however, if could just select the images I want and hit the reset tool and reset all the images selected. But it only seems to reset the dominant image. Any way to get the reset button to work on more than one image at a time?
    Gordon

    do it in Grid not Filmstrip or Develop.
    Don
    Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D See LR Links list at http://donricklin.blogspot.com for related sites.

  • Is it possible to install Lightroom 4.1 on more than one computer using the same product code?

    is it possible to install Lightroom 4.1 on more than one computer using the same product code?

    Yes, your license key is cross platform PC & or Mac you are allowed to have two current installations with one in use at any point in time. You can uninstall / install as many times as is necessary so long as you adhere to the limits.

  • How do you open more than one image at a time in Camera Raw?

    We used to be able to select more than one image from a folder and process one after the other in camera raw. Now we can only do one at a time. Is there a secret keyboard short-cut to allow this still?

    Which operating system are you using?
    One should still be able to open multiple files into camera raw.
    Camera raw files. tiffs and jpegs.
    If in the pse 13 Editor in the Expert mode you go to File>Open in Camera Raw, you aren't able to open more than one file into camera raw?

  • XCode won't load more than one application at a time on my iTouch?

    I got the latest SDK, installed the latest firmware, re-generated the provisioning profile. Really, everything works exactly as expected, and xCode installs my application normally, but if I, say, try to install two different sample projects, HelloWorld and TheElements, when I "Build and Go" the second application, it deletes the previous application as part of the installation procedure. That is, TheElements will be installed, and HelloWorld will be deleted.
    This only happens on the device, not in the emulator, and happens with any application, not just these two. I just can't install more than one app on the device.
    According to iTunes, there is plenty of room on the actual iTouch. Also, in Organizer, rather than a checkbox next to the Application, there is an "arrow". When I click the application, I see "Application Data".
    What the ****? Is this normal for iTouch? Are only iPhone developers allowed to develop more than one application at a time?

    you must create an application ID
    (use program portal - App ID) and in provisioning make a profile with the new App ID, and use the
    same profile in your 2 applications
    In Xcode for your project , (2*click target) section properties, use different names as Identifier, and you can have
    more than one of your applications installed on the phone. I use identifieres as
    dk.mochasoft.abc
    and
    dk.mochasoft.xyz
    I think when you release the applications to App Store, you will need different Profiles for the applications. The Apple documentation is a little weak on this subject.

  • Can I back up more than one mac to the time machine:

    Can I back up more than one Mac to a time machine? I have a laptop and a Mac Desktop computer can I back up both on the same Time machine

    Absolutely.
    However, quoting from ASC contributor Pondini's excellent Time Machine FAQ:
    It is advisable, though, to partition an external disk that will be connected to your Macs into one volume for each Mac ...

  • My 2009 iMac freezes and won't run more than one application at a time - how can I fix this?

    Help! My iMac has been getting worse regarding freezing, especially when trying to open iPhoto. It will load slowly, and then I get the pinwheel of death for ever, until I shutdown and try over again. It usually takes several tries, and usually overnight. How can I resolve this issue?

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Problem trying to email more than one image at a time from LR3

    Hi.  I have set up the export presets for 'Email and Attach' carefully following the instructions. If I select more than one photo to send only one appears as an attachment. I am using OUTLOOK. How do I solve this problem?

    What do you mean by "Email and Attach" ? There is no such thing as "Attach" in the LR Export dialog. At least not in my version of LR. You export photos for e-mail to a certain folder or to your desktop and then attach them manually to your e-mail.
    WW

  • ITunes Won't Burn More Than One CD at a time...

    (I am sorry if this is in the incorrect forum)
    When I attempt to burn more than one CD (one right after the other) using iTunes I get an error message stating that the computer cannot calibrate enough laser power...and it spits the CD out. If I wait a few hours/restart it works again— anyone know if this is just an iTunes problem?
    Thanks,
    Krista

    Maybe I misunderstood your post, but this sounds like a suggestion rather than a problem.
    You can provide iTunes feedback here:
    http://www.apple.com/feedback/itunesapp.html
    If your post was a question, post back and I'll see if I can help.
    I hope this solves your problem!

  • How do i delte more than one image at a time from all images folder on iMac

    i have 7000 images in the my images folder, how can I delte them all at once?

    Click on one folder (if they are nested together in parent folder) and use Select All from Edit menu; then use Move To Trash from File menu. Then use Empty Trash from Finder menu. Same with single images if all of them are in one folder.
    Sometimes a folder may be where an application expects to put them, so if that's the case, be sure to leave an empty folder if its part of a system or application. There are times when ownership privilege or user permissions may be lacking, so you may not be able to move or trash them.
    Hopefully its not more complicated than this.
    Good luck & happy computing!

  • ITunes 7 won't add more than one file at a time

    Hello everyone. I have a weird problem with iTunes 7.0.2. Every time I try to add multiple files to the iTunes library using the Add File To Library feature, it doesn't do anything. Adding one file at a time is possible, but tedious. Adding multiple files from a folder (using Add Folder To Library) does work, but shouldn't be necessary. I haven't had this problem with iTunes 7.0.2 on the Mac, and didn't have this issue with iTunes 6.0.5 and before on Windows. Any idea what the problem might be? Thanks in advance.
    -Adam

    Maybe I misunderstood your post, but this sounds like a suggestion rather than a problem.
    You can provide iTunes feedback here:
    http://www.apple.com/feedback/itunesapp.html
    If your post was a question, post back and I'll see if I can help.
    I hope this solves your problem!

  • Library won't play more than one song at a time

    What gives? My iTunes suddenly won't play a sequence of songs. Not from the library as a whole, not from any playlist. The files are all still there and I can highlight and play any ONE, but iTunes won't then go on to the next. Tried 'select all', that didn't work either. What setting have I accidently changed? Just downloaded the newest iTunes just in case, but that didn't help. Still only 1 song at a time. Makes using iTunes as background pretty useless.

    Are you saying that when you hit PAUSE the song doesn't stop playing?
    If you want to jump to a different song while one is already playing, you don't need to hit pause/stop at all. Simply go to the song you want to here, double click it and the song that was playing will stop and the double clicked song will start. No need to use the Stop/Pause/Play type controls at all.
    Patrick

  • Playlists won't play more than one song at a time

    Hi
    I have setup some play lists, some play all the songs, others will only play one song then stop and I have to manually go to the next song. I don't understand and it's driving me mad! I read through some old posts on this and made sure that the check boxes next to my songs are ticked. I have also made sure that the shuffle & 'play playlist' icons are in blue. Is there anything else I can try? Please, please help!
    Gemma

    Besides the checkboxes next to songs, you might want to check the songs themselves with the Get Info command and make sure the "Skip When Shuffling" option it turned off. If your playlist is set to shuffle and your songs say skip when shuffling, then they won't play.
    Also, are these new playlists? Or are they playlists that were ok before but now (after upgrading to iTunes 7.6?) act differently?
    Patrick

Maybe you are looking for

  • How can I export my music library if I can't upgrade my iTunes?

    I have an ancient iMac running an ancient OS (10.4.11). I basically keep it cos I love the design and I spent literally weeks downloading all my CDs onto it back in the day. My iPod just got stolen so I want to put my music library on my iPhone 3GS.

  • How to output sound from Zen Neeon to speaker without using

    how to output sound from Zen Neeon to speaker directly? as far as i know, i can only play content in my mp3 player using speaker with usb cable connected to pc i just wonder how i play using "play" button in mp3 player and the sound will output to sp

  • How To Reverse Excess Confirmed Quantity in Process Order?

    Hi Experts, Good day! I have a Process Order with Total Quantity of 68,180 L which currently have  a status of TECO CNF  DLV  PRC  BASC BCRQ GMPS MACM*. I made my first partial confirmation with a quantity of 1,000 L for my Finished Good u2013 this i

  • Can't install drivers. unknown error

    gents, I suddenly can't install drivers so that my new iLok and my Logitech USB-Dongle aren't working. I did a backup of all drivers from another Win7x64 systemdrive and extracted them. The Drivers were working on that system and am there. Still I go

  • Fine line around placed object

    I have been trying to place an image into photoshop cs6. This image however has a white 1 pixel outline around the border. It is very annoying and I can't seem to eliminate it so it doesnt affect the background colour. Does anyone know how to fix thi