Limit PO price is shown as Zero in SUS

HI,
We are creating a Limit PO in ECC with some limit value. we are getting following problems,
1. In SUS portal, the PO price is Zero.
2. The UOM picked is piece(ST), whereas the PO unit is AU (activity Unit).
Where am I wrong? How to populate the price in SUS portal PO.
Is there any mapping for UOM of ECC & SUS? Any table mapping where we need to update/change the UOM mapping.
Request your help.
Thanks & Regards

Hi,
Hope this link will help you to understand limit PO behavior in MM-SUS.
http://wiki.sdn.sap.com/wiki/display/SRM/SUS+Limit+PO+Behavior+in+MM-SUS+scenario
Thanks
Ravi

Similar Messages

  • Limit PO price changes are not replicated to ECC backend

    Hi all,
    SRM 5.0 ECS SP13.
    When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the  field "VALUE" and "EXPECTED VALUE" have the changed/new value.
    Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
    After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
    I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
    SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
    SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
    SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
    Can someone throw some pointers how to resolve the above issue.
    Thanks in advance.

    Hi
    can you recreate the same issue
    are you saying that
    1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
    2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
    or
    1. limit sc
    2. Limit PO
    3. update not reached ECC.
    Note 1284361 - Limits not transferred to backend purchase order
    Symptom
    Extended classic scenario.
    You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

  • Excise shown is zero

    hi all,
    during excise capturing.excise shown is zero(aed and bed shown zero).
    tax procedure TAXINJ.
    REGARDS
    SUMIT BISLA

    Hi,
    1st check in t.code FTXP, where Tax Code plays a vital role, as the Tax Rate are maintained in and see the Tax Rate are  for AED and BED.
    Check condition types of AED and BED are there in classify condition types in following path where you specify which condition type is used for which sort of tax.
    SPRO --> Logistics general > tax on Goods Movements> India > Classify Condition Types>Condition-Based Excise Determination
    NOTE: Did you maintain the condition record for condition types JMX1 & JMX2 and JAX1 & JAX2 if not just maintain the condition record for JMX1 & JMX2 as 100% respectively in FV11 t.code.
    Also check in OBCL t.code for assignment of tax code(input tax ) to company code with tax procedure TAXINJ.
    Regards,
    Biju K

  • CO12-Yield quantity shown is zero even after confirmation with correct qty.

    Hi Experts,
    While confirmation using CO12- collective confirmation, i get a message "Total confirmed quantity does not equal planned quantity"( ECC6.0 system). Moreover for  few plants, the yield is zeroed out, eventhough i enter the planned qty and after confirmation is executed, the yield shown is zero for those confirmed operations.
    1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
    2. Why does the yield quantity zeroed out for some plant? (maybe for some material)?
    Any pointers would be of great help.
    Thanks,
    SudhaharN

    Hi,
    Answers to your questions are,
    1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
    Total confirmation quantity for that particular operation is exceeding the actual Qty.
    You can check in CO14 how much it is already confirmed.
    2. Why does the yield quantity zeroed out for some plant? (maybe for some material)?
    Check setting in OPKI (for collective conf) wether you have selected the option Qtys immeed.
    This will propose you the remaining qty in CO12 you need not to enter.
    Give points if this is useful.
    Regards,
    Vinayak.

  • Tolerance Limit for Price Variance (Purchase Order)

    Hello,
    Business Case :
    Final users require a specific tolerance limit rate for Price variance in Freight services POs.
    We have a current rate set up at Company level
    --> standard customizing (MM / Purchasing / Purchase order / Set tolerance limit for Price variance)
    Do you know any way to set up diffferent tolerance limit depending on the purchasing flow ? Vendor level for example ?
    thanks for your time.
    regards,

    Thanks for your reply.
    What do you mean by "syestem look for noramal quantity variance from info record" ?
    P.I.R only conatins under and over delivery tolerance, but nothing related to price variance between GR and Invoice.
    I'm looking for a customizing in order to have a Tolerance limit for Price variance at another level than Company.
    At vendor level for example ?
    Do you confirm there is no standard customizing ?
    Any user exit available ?
    thanks
    regards

  • Disable the update prices Tab while processing PO in SUS

    Hi,
    I need to Disable the update prices Tab while processing PO in SUS.
    Please advise.
    Thanks in Advance,
    Manu

    Best would be to do the following steps-->
    1) for the vendor user --> check the roles assigned
    2) for each of the role which you have assigned to the vendor user ---> go to PFCG ---> enter your role
    --->  Click on display ---> go to authorization tab ---> click on display authorization data -->
    find out --> SUS ---> access to documents in SUS -->
    there will be one activity --> display prices ---> this should be disabled , then the button will not be shown.

  • Condition type needed as both internal price and shown as cost in KE24

    Dear friend,
    I like to set up a condition type with attribute of internal price but like to it to be show as cost in profitability .
    Please see details.
    condition type needed as a internal price under condition part in SO line item , but will not be shown in customer invoice,
    At the same time, condition type needed to be shown in KE24 Please advise.
    Thanks,
    LG

    Hi
    You can transfer any kind of condition from SD to COPA although it will be an statistical condition (see for instance tcode KE4I).
    Talk with a CO consultant, because you will have to do a serie of steps.
    See these notes:
    Note 62536 - Info: Conditions in Profitability Analysis
    Note 74486 - INFO: Overview of consulting notes for CO-PA
    Regards
    Eduardo

  • PO Tolerance Limit for Price Variance

    All,
    For the key PE I have set Upper Limit for Percentage Check Limit to 0.01%.  At what point is the tolerance limit check?  Is it at PO creation or some other point?
    Thanks,
    Sean

    The related error message appears at the time of PO creation. It will prevent you from creating the PO with a price that is ourside the allowed tolerance value
    PE tolerance limits defines the allowed variation in price between the PO price and that of material price stored in the material master as standard price. The standard price is the output of the standard costing process

  • Istore Prices not shown correctly during checkout

    hi all;
    when i have selected the items from shopping cart say for 1578.46 euros:
    as i check out it is showing 1578.47 euros:
    after confirmation of the order it is showing 1578.49 euros. in OM
    How is this working?
    Regards;
    Prasad

    hi chandu,
    thank you very much for the update,
    oracle says this is the current functionality, could you pl suggest any workarounds?
    i tried using pricing formulae to round the price, not working
    even when i refresh the place order page increases the price by 0.01
    any suggestions please;
    prasad

  • My app prices are shown in euros. How do i turn it back to dollars?

    My app prices are in euros. How do i change them back to dollars?

    Prices are displayed in the currency of the country's store you are in.
    If you changed your store, you need to change it back to whatever it was originally.
    Go to Settings->iTunes & App Stores->Apple ID->View Apple ID ->Country/Region
    Change it to your own.

  • Song Price Not shown in English

    I've got the latest version of ITunes 7.0.2-16 installed.
    All of my computer settings and ITunes preferences are set to "US English" but the price of all the music store songs shows up in some foreign currency.
    Any thoughts on how to fix???

    Found the issue. Apple should remove that selection tool and just use the computer settings!!!
    Com-on apple... that should be a no-brainer.

  • How i can limit the price lists in the LOV in Order Managment  using form personlization

    am using the below query in the argument but always am getting (FRM-41826 cannot replace group;columns don't match LOV )
    SELECT hh.list_header_id,name,description  FROM qp.qp_list_headers_tl  hh,qp_list_headers_b  bb
    where ATTRIBUTE15='SPS'
    and  bb.list_header_id=hh.list_header_id
    and  bb.end_date_active  is null
    can any body help to give the match columns in the LOV ?
    regards

    Hi Sanjay
    Thanks for reply
    Actually  i already made a  restriction on order type  LOV and it is working , my problem in getting the correct matched column names in the select statement for price lists
    regards

  • Base price need to be zero.

    Hi All,
    I have a requirement where i need to make the base price for material xxxx  as "0" for a particular customer.
    I tried to do that but that particular condition type is mandatory condition type.
    When i am creating SO,it is throwing error as "condition type ZF12 is missing".
    how can i make the price of this condition type as 0.Pls suggest.
    Thanks,
    Pavan.

    Dear Pavan ,
    For your scenario , you have to insert Routine in your pricing procedure in condition formula calc rule.
    you have to give the logic to this Routine to overwrite the base price with the combination of customer & material. this combination you have to maintain in the Dynamic table which has to check with this dynamic table, if entire has found then price has to over write to '0' other wise it has to execute the existing price.
    Regards,
    C.B Reddy.

  • How do I limit number of emails shown?

    after updating to IOS& my ipads and Iphone 4s show a count of all emails in my POP (Yahoo) account. I am also unable to set the number to download, as was possible with previous IOS versions.

    after updating to IOS& my ipads and Iphone 4s show a count of all emails in my POP (Yahoo) account. I am also unable to set the number to download, as was possible with previous IOS versions.

  • Central Contract in SRM 7

    Hi Experts,
    We are on SRM 7 Ehp1.
    ECC Ehp4
    Need a clarification on Central Contract of SRM.
    When we create and distribute the Central contract to backend, the price is shown as Zero in Backend.
    When the PO is created in backend, from where will the price be picked. Is it SRM?
    Is this correct?
    Thanks
    Aditya

    Hi,
    Are you creating service contracts?
    When we worked on Hierarchy contract we used MDM to get hold of those. As there were several issues in distribution.
    1. Basic Contract can contain line items.
    2. This is where we have used MDM to store contracts & used accordingly.
    You can distribute parent contract (with child contracts) as of I fell. Give a shot & let us know the ensues.
    Regards,
    yaniVy
    reward if helps

Maybe you are looking for